It wasn't all that clear which lock levels, if any, would be held on the
DEFAULT partition during an ATTACH PARTITION operation.
Also, clarify which locks will be taken if the DEFAULT partition or the
table being attached are themselves partitioned tables.
Here I'm only backpatching to v12 as before then we obtained an ACCESS
EXCLUSIVE lock on the partitioned table. It seems much less relevant to
mention which locks are taken on other tables when the partitioned table
itself is locked with an ACCESS EXCLUSIVE lock.
Author: Matthias van de Meent, David Rowley
Discussion: https://postgr.es/m/CAEze2WiTB6iwrV8W_J=fnrnZ7fowW3qu-8iQ8zCHP3FiQ6+o-A@mail.gmail.com
Backpatch-through: 12
The error messages using the word "non-negative" are confusing
because it's ambiguous about whether it accepts zero or not.
This commit improves those error messages by replacing it with
less ambiguous word like "greater than zero" or
"greater than or equal to zero".
Also this commit added the note about the word "non-negative" to
the error message style guide, to help writing the new error messages.
When postgres_fdw option fetch_size was set to zero, previously
the error message "fetch_size requires a non-negative integer value"
was reported. This error message was outright buggy. Therefore
back-patch to all supported versions where such buggy error message
could be thrown.
Reported-by: Hou Zhijie
Author: Bharath Rupireddy
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/OS0PR01MB5716415335A06B489F1B3A8194569@OS0PR01MB5716.jpnprd01.prod.outlook.com
Add pg_resetxlog -u option to set the oldest xid in pg_control.
Previously -x set this value be -2 billion less than the -x value.
However, this causes the server to immediately scan all relation's
relfrozenxid so it can advance pg_control's oldest xid to be inside the
autovacuum_freeze_max_age range, which is inefficient and might disrupt
diagnostic recovery. pg_upgrade will use this option to better create
the new cluster to match the old cluster.
Reported-by: Jason Harvey, Floris Van Nee
Discussion: https://postgr.es/m/20190615183759.GB239428@rfd.leadboat.com, 87da83168c644fd9aae38f546cc70295@opammb0562.comp.optiver.com
Author: Bertrand Drouvot
Backpatch-through: 9.6
We had documentation of default_transaction_isolation et al,
but for some reason not of transaction_isolation et al.
AFAICS this is just an ancient oversight, so repair.
Per bug #17077 from Yanliang Lei.
Discussion: https://postgr.es/m/17077-ade8e166a01e1374@postgresql.org
This commit fixes wrong wording like "a fewer kinds"
in the description about track_planning option.
Back-patch to v13 where pg_stat_statements.track_planning was added.
Author: Justin Pryzby
Reviewed-by: Julien Rouhaud, Fujii Masao
Discussion: https://postgr.es/m/20210418233615.GB7256@telsasoft.com
These are the same as world and install-world respectively, but without
building or installing the documentation. There are many reasons for
wanting to be able to do this, including speed, lack of documentation
building tools, and wanting to build other formats of the documentation.
Plans for simplifying the buildfarm client code include using these
targets.
Backpatch to all live branches.
Discussion: https://postgr.es/m/6a421136-d462-b043-a8eb-e75b2861f3df@dunslane.net
The syntax summaries for CREATE FUNCTION and allied commands
made it look like LEAKPROOF is an alternative to
IMMUTABLE/STABLE/VOLATILE, when of course it is an orthogonal
option. Improve that.
Per gripe from aazamrafeeque0. Thanks to David Johnston for
suggestions.
Discussion: https://postgr.es/m/162444349581.694.5818572718530259025@wrigleys.postgresql.org
In a synchronous logical setup, locking [user] catalog tables can cause
deadlock. This is because logical decoding of transactions can lock
catalog tables to access them so exclusively locking those in transactions
can lead to deadlock. To avoid this users must refrain from having
exclusive locks on catalog tables.
Author: Takamichi Osumi
Reviewed-by: Vignesh C, Amit Kapila
Backpatch-through: 9.6
Discussion: https://www.postgresql.org/message-id/20210222222847.tpnb6eg3yiykzpky%40alap3.anarazel.de
PersistHoldablePortal has long assumed that it should store the
entire output of the query-to-be-persisted, which requires rewinding
and re-reading the output. This is problematic if the query is not
stable: we might get different row contents, or even a different
number of rows, which'd confuse the cursor state mightily.
In the case where the cursor is NO SCROLL, this is very easy to
solve: just store the remaining query output, without any rewinding,
and tweak the portal's cursor state to match. Aside from removing
the semantic problem, this could be significantly more efficient
than storing the whole output.
If the cursor is scrollable, there's not much we can do, but it
was already the case that scrolling a volatile query's result was
pretty unsafe. We can just document more clearly that getting
correct results from that is not guaranteed.
There are already prohibitions in place on using SCROLL with
FOR UPDATE/SHARE, which is one way for a SELECT query to have
non-stable results. We could imagine prohibiting SCROLL when
the query contains volatile functions, but that would be
expensive to enforce. Moreover, it could break applications
that work just fine, if they have functions that are in fact
stable but the user neglected to mark them so. So settle for
documenting the hazard.
While this problem has existed in some guise for a long time,
it got a lot worse in v11, which introduced the possibility
of persisting plpgsql cursors (perhaps implicit ones) even
when they violate the rules for what can be marked WITH HOLD.
Hence, I've chosen to back-patch to v11 but not further.
Per bug #17050 from Алексей Булгаков.
Discussion: https://postgr.es/m/17050-f77aa827dc85247c@postgresql.org
The following parameters have been imprecise, or incorrect, about their
description (PGC_POSTMASTER or PGC_SIGHUP):
- autovacuum_work_mem (docs, as of 9.6~)
- huge_page_size (docs, as of 14~)
- max_logical_replication_workers (docs, as of 10~)
- max_sync_workers_per_subscription (docs, as of 10~)
- min_dynamic_shared_memory (docs, as of 14~)
- recovery_init_sync_method (postgresql.conf.sample, as of 14~)
- remove_temp_files_after_crash (docs, as of 14~)
- restart_after_crash (docs, as of 9.6~)
- ssl_min_protocol_version (docs, as of 12~)
- ssl_max_protocol_version (docs, as of 12~)
This commit adjusts the description of all these parameters to be more
consistent with the practice used for the others.
Revewed-by: Justin Pryzby
Discussion: https://postgr.es/m/YK2ltuLpe+FbRXzA@paquier.xyz
Backpatch-through: 9.6
The error messages, docs, and one of the options were using
'parallel degree' to indicate parallelism used by vacuum command. We
normally use 'parallel workers' at other places so change it for parallel
vacuum accordingly.
Author: Bharath Rupireddy
Reviewed-by: Dilip Kumar, Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/CALj2ACWz=PYrrFXVsEKb9J1aiX4raA+UBe02hdRp_zqDkrWUiw@mail.gmail.com
Formerly we just relied on operator classes that assert longValuesOK
to eventually shorten the leaf value enough to fit on an index page.
That fails since the introduction of INCLUDE-column support (commit
09c1c6ab4), because the INCLUDE columns might alone take up more
than a page, meaning no amount of leaf-datum compaction will get
the job done. At least with spgtextproc.c, that leads to an infinite
loop, since spgtextproc.c won't throw an error for not being able
to shorten the leaf datum anymore.
To fix without breaking cases that would otherwise work, add logic
to spgdoinsert() to verify that the leaf tuple size is decreasing
after each "choose" step. Some opclasses might not decrease the
size on every single cycle, and in any case, alignment roundoff
of the tuple size could obscure small gains. Therefore, allow
up to 10 cycles without additional savings before throwing an
error. (Perhaps this number will need adjustment, but it seems
quite generous right now.)
As long as we've developed this logic, let's back-patch it.
The back branches don't have INCLUDE columns to worry about, but
this seems like a good defense against possible bugs in operator
classes. We already know that an infinite loop here is pretty
unpleasant, so having a defense seems to outweigh the risk of
breaking things. (Note that spgtextproc.c is actually the only
known opclass with longValuesOK support, so that this is all moot
for known non-core opclasses anyway.)
Per report from Dilip Kumar.
Discussion: https://postgr.es/m/CAFiTN-uxP_soPhVG840tRMQTBmtA_f_Y8N51G7DKYYqDh7XN-A@mail.gmail.com
Make sample like_regex match string values of the root object instead of the
whole document. The corrected example seems to represent a more relevant
use case.
Backpatch to 12, when jsonpath was introduced.
Discussion: https://postgr.es/m/13440f8b-4c1f-5875-c8e3-f3f65606af2f%40xs4all.nl
Author: Erik Rijkers
Reviewed-by: Michael Paquier, Alexander Korotkov
Backpatch-through: 12
Mention specifically that you can't call aggregates, window functions,
or procedures this way (the inability to call SRFs was already
mentioned).
Also, the claim that PQfn doesn't support NULL arguments or results
has been a lie since we invented protocol 3.0. Not sure why this
text was never updated for that, but do it now.
Discussion: https://postgr.es/m/2039442.1615317309@sss.pgh.pa.us
For some reason, the "julian" option for extract()/date_part() has
never gotten listed in the manual. Also, while Appendix B mentioned
in passing that we don't conform to the usual astronomical definition
that a Julian date starts at noon UTC, it was kind of vague about what
we do instead. Clarify that, and add an example showing how to get
the astronomical definition if you want it.
It's been like this for ages, so back-patch to all supported branches.
Discussion: https://postgr.es/m/1197050.1619123213@sss.pgh.pa.us
Previously it was documented that if using "-X none" option there was
no guarantee that all required WAL files were archived at the end of
pg_basebackup when taking a backup from the standby. But this limitation
was removed by commit 52f8a59dd9. Now, even when taking a backup
from the standby, pg_basebackup can wait for all required WAL files
to be archived. Therefore this commit removes such obsolete
description from the docs.
Also this commit adds new description about the limitation when
taking a backup from the standby, into the docs. The limitation is that
pg_basebackup cannot force the standbfy to switch to a new WAL file
at the end of backup, which may cause pg_basebackup to wait a long
time for the last required WAL file to be switched and archived,
especially when write activity on the primary is low.
Back-patch to v10 where the issue was introduced.
Reported-by: Kyotaro Horiguchi
Author: Kyotaro Horiguchi, Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/20210420.133235.1342729068750553399.horikyota.ntt@gmail.com
Comment fixes are applied on HEAD, and documentation improvements are
applied on back-branches where needed.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20210408164008.GJ6592@telsasoft.com
Backpatch-through: 9.6
Command-line options, or previous "ALTER (ROLE|DATABASE) ...
SET ROLE ..." commands, can change the value of the default role
for a session. In the presence of one of these, RESET ROLE will
change the current user identifier to the default role rather
than the session user identifier. Fix the documentation to
reflect this reality. Backpatch to all supported versions.
Author: Nathan Bossart
Reviewed-By: Laurenz Albe, David G. Johnston, Joe Conway
Reported by: Nathan Bossart
Discussion: https://postgr.es/m/flat/925134DB-8212-4F60-8AB1-B1231D750CB4%40amazon.com
Backpatch-through: 9.6
The current instructions describing how to write the backup_label and
tablespace_map files are confusing. For example, opening a file in text
mode on Windows and copy-pasting the file's contents would result in a
failure at recovery because of the extra CRLF characters generated. The
documentation was not stating that clearly, and per discussion this is
not considered as a supported scenario.
This commit extends a bit the documentation to mention that it may be
required to open the file in binary mode before writing its data.
Reported-by: Wang Shenhao
Author: David Steele
Reviewed-by: Andrew Dunstan, Magnus Hagander
Discussion: https://postgr.es/m/8373f61426074f2cb6be92e02f838389@G08CNEXMBPEKD06.g08.fujitsu.local
Backpatch-through: 9.6
Some sections of the documentation used "exclusive lock" to describe
that an ACCESS EXCLUSIVE lock is taken during a given operation. This
can be confusing to the reader as ACCESS SHARE is allowed with an
EXCLUSIVE lock is used, but that would not be the case with what is
described on those parts of the documentation.
Author: Greg Rychlewski
Discussion: https://postgr.es/m/CAKemG7VptD=7fNWckFMsMVZL_zzvgDO6v2yVmQ+ZiBfc_06kCQ@mail.gmail.com
Backpatch-through: 9.6
The new appendix groups information on renamed or removed settings,
commands, etc into an out-of-the-way part of the docs.
The original id elements are retained in each subsection to ensure that
the same filenames are produced for HTML docs. This prevents /current/
links on the web from breaking, and allows users of the web docs
to follow links from old version pages to info on the changes in the
new version. Prior to this change, a link to /current/ for renamed
sections like the recovery.conf docs would just 404. Similarly if
someone searched for recovery.conf they would find the pg11 docs,
but there would be no /12/ or /current/ link, so they couldn't easily
find out that it was removed in pg12 or how to adapt.
Index entries are also added so that there's a breadcrumb trail for
users to follow when they know the old name, but not what we changed it
to. So a user who is trying to find out how to set standby_mode in
PostgreSQL 12+, or where pg_resetxlog went, now has more chance of
finding that information.
Craig Ringer and Stephen Frost
Reviewed-by: Euler Taveira
Discussion: https://postgr.es/m/CAGRY4nzPNOyYQ_1-pWYToUVqQ0ThqP5jdURnJMZPm539fdizOg%40mail.gmail.com
Backpatch-through: 10
On partition detach, we acquire a SHARE lock on all tables that
reference the partitioned table that we're detaching a partition from,
but failed to document this fact. My oversight in commit f56f8f8da6af.
Repair. Backpatch to 12.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20210325180244.GA12738@alvherre.pgsql
A couple error messages and comments used 'statistic kind', not the
correct 'statistics kind'. Fix and backpatch all the way back to 10,
where extended statistics were introduced.
Backpatch-through: 10
