under libdir, for a cleaner separation in the installation layout
and compatibility with binary packaging standards. Point backend's
default search location there. The contrib modules are also
installed in the said location, giving them the benefit of the
default search path as well. No changes in user interface
nevertheless.
>
> 1. Now outputs '\\' instead of '\134' when using encode(bytea, 'escape')
> Note that I ended up leaving \0 as \000 so that there are no ambiguities
> when decoding something like, for example, \0123.
>
> 2. Fixed bug in byteain which allowed input values which were not valid
> octals (e.g. \789), to be parsed as if they were octals.
>
> Joe
>
Here's rev 2 of the bytea string support patch. Changes:
1. Added missing declaration for MatchBytea function
2. Added PQescapeBytea to fe-exec.c
3. Applies cleanly on cvs tip from this afternoon
I'm hoping that someone can review/approve/apply this before beta starts, so
I guess I'd vote (not that it counts for much) to delay beta a few days :-)
Joe Conway
Assign the fixed user id 1 to the user created by initdb.
A stand-alone backend will always set the user id to 1.
(Consequently, the name of that user is no longer important.)
In stand-alone mode, the user id 1 will have implicit superuser
status, to allow repairs even if there are no users defined.
Print a warning message when starting in stand-alone mode when no
users are defined.
Disallow dropping the current user and session user.
Granting/revoking superuser status also grants/revokes usecatupd.
(Previously, it would never grant it back. This could lead to "deadlocks".)
CREATE USER and CREATE GROUP will start allocating user ids at 100
(unless explicitly specified), to prevent accidental creation of a
superuser (plus some room for future extensions).
> > ClientEncoding to SQL_ASCII (like default DatabaseEncoding). Bruce, can
> > you change it? It's one line change. Again thanks.
Forget it! A default client encoding must be set by actual database encoding...
Please apply the small attached patch that solve it better.
Karel Zak
We will no longer try to send elog messages to the client before we have
initialized backend libpq (oops); however, reporting bogus commandline
switches via elog does work now (not irrelevant, because of PGOPTIONS).
Fix problem with inappropriate sending of checkpoint-process messages
to stderr.
for them, and making them just wastes time during backend startup/shutdown.
Also, remove compile-time MAXBACKENDS limit per long-ago proposal.
You can now set MaxBackends as high as your kernel can stand without
any reconfiguration/recompilation.
-------------------------------------------------------------------
Subject: Re: [PATCHES] encoding names
From: Karel Zak <zakkr@zf.jcu.cz>
To: Peter Eisentraut <peter_e@gmx.net>
Cc: pgsql-patches <pgsql-patches@postgresql.org>
Date: Fri, 31 Aug 2001 17:24:38 +0200
On Thu, Aug 30, 2001 at 01:30:40AM +0200, Peter Eisentraut wrote:
> > - convert encoding 'name' to 'id'
>
> I thought we decided not to add functions returning "new" names until we
> know exactly what the new names should be, and pending schema
Ok, the patch not to add functions.
> better
>
> ...(): encoding name too long
Fixed.
I found new bug in command/variable.c in parse_client_encoding(), nobody
probably never see this error:
if (pg_set_client_encoding(encoding))
{
elog(ERROR, "Conversion between %s and %s is not supported",
value, GetDatabaseEncodingName());
}
because pg_set_client_encoding() returns -1 for error and 0 as true.
It's fixed too.
IMHO it can be apply.
Karel
PS:
* following files are renamed:
src/utils/mb/Unicode/KOI8_to_utf8.map -->
src/utils/mb/Unicode/koi8r_to_utf8.map
src/utils/mb/Unicode/WIN_to_utf8.map -->
src/utils/mb/Unicode/win1251_to_utf8.map
src/utils/mb/Unicode/utf8_to_KOI8.map -->
src/utils/mb/Unicode/utf8_to_koi8r.map
src/utils/mb/Unicode/utf8_to_WIN.map -->
src/utils/mb/Unicode/utf8_to_win1251.map
* new file:
src/utils/mb/encname.c
* removed file:
src/utils/mb/common.c
--
Karel Zak <zakkr@zf.jcu.cz>
http://home.zf.jcu.cz/~zakkr/
C, PostgreSQL, PHP, WWW, http://docs.linux.cz, http://mape.jcu.cz
- new millisecond (ms) and microsecond (us) support
- more robus parsing from string - used is separator checking for
non-exact formats like to_date('2001-9-1', 'YYYY-MM-DD')
- SGML docs are included
Karel Zak
If there's anyone out there who's actually using datatype-defined
default values, this will be an incompatible change in behavior ...
but the old behavior was so broken that I doubt anyone was using it.
buffer manager with 'pg_clog', a specialized access method modeled
on pg_xlog. This simplifies startup (don't need to play games to
open pg_log; among other things, OverrideTransactionSystem goes away),
should improve performance a little, and opens the door to recycling
commit log space by removing no-longer-needed segments of the commit
log. Actual recycling is not there yet, but I felt I should commit
this part separately since it'd still be useful if we chose not to
do transaction ID wraparound.
pgsql-hackers. pg_opclass now has a row for each opclass supported by each
index AM, not a row for each opclass name. This allows pg_opclass to show
directly whether an AM supports an opclass, and furthermore makes it possible
to store additional information about an opclass that might be AM-dependent.
pg_opclass and pg_amop now store "lossy" and "haskeytype" information that we
previously expected the user to remember to provide in CREATE INDEX commands.
Lossiness is no longer an index-level property, but is associated with the
use of a particular operator in a particular index opclass.
Along the way, IndexSupportInitialize now uses the syscaches to retrieve
pg_amop and pg_amproc entries. I find this reduces backend launch time by
about ten percent, at the cost of a couple more special cases in catcache.c's
IndexScanOK.
Initial work by Oleg Bartunov and Teodor Sigaev, further hacking by Tom Lane.
initdb forced.
Allow pg_shadow to be MD5 encrypted.
Add ENCRYPTED/UNENCRYPTED option to CREATE/ALTER user.
Add password_encryption postgresql.conf option.
Update wire protocol version to 2.1.
for speed reasons; its result type also changes to int8. avg() on these
datatypes now accumulates the running sum in int8 for speed; but we still
deliver the final result as numeric, so that fractional accuracy is
preserved.
count() now counts and returns in int8, not int4. I am a little nervous
about this possibly breaking users' code, but there didn't seem to be
a strong sentiment for avoiding the problem. If we get complaints during
beta, we can change count back to int4 and add a "count8" aggregate.
For that matter, users can do it for themselves with a simple CREATE
AGGREGATE command; the int4inc function is still present, so no C hacking
is needed.
Also added max() and min() aggregates for OID that do proper unsigned
comparison, instead of piggybacking on int4 aggregates.
initdb forced.
default, but OIDS are removed from many system catalogs that don't need them.
Some interesting side effects: TOAST pointers are 20 bytes not 32 now;
pg_description has a three-column key instead of one.
Bugs fixed in passing: BINARY cursors work again; pg_class.relhaspkey
has some usefulness; pg_dump dumps comments on indexes, rules, and
triggers in a valid order.
initdb forced.
has a DISTINCT ON clause, per bug report from Anthony Wood. While at it,
improve the DISTINCT-ON-clause recognizer routine to not be fooled by out-
of-order DISTINCT lists.
in GetSnapshotData, GetNewTransactionId, CommitTransaction, AbortTransaction,
etc. Correct race condition in transaction status testing in
HeapTupleSatisfiesVacuum --- this wasn't important for old VACUUM with
exclusive lock on its table, but it sure is important now. All per
pghackers discussion 7/11/01 and 7/12/01.
Note: I didn't force an initdb, figuring that one today was enough.
However, there is a new function in pg_proc.h, and pg_dump won't be
able to dump partial indexes until you add that function.
per previous discussion on pghackers. Most of the duplicate code in
different AMs' ambuild routines has been moved out to a common routine
in index.c; this means that all index types now do the right things about
inserting recently-dead tuples, etc. (I also removed support for EXTEND
INDEX in the ambuild routines, since that's about to go away anyway, and
it cluttered the code a lot.) The retail indextuple deletion routines have
been replaced by a "bulk delete" routine in which the indexscan is inside
the access method. I haven't pushed this change as far as it should go yet,
but it should allow considerable simplification of the internal bookkeeping
for deletions. Also, add flag columns to pg_am to eliminate various
hardcoded tests on AM OIDs, and remove unused pg_am columns.
Fix rtree and gist index types to not attempt to store NULLs; before this,
gist usually crashed, while rtree managed not to crash but computed wacko
bounding boxes for NULL entries (which might have had something to do with
the performance problems we've heard about occasionally).
Add AtEOXact routines to hash, rtree, and gist, all of which have static
state that needs to be reset after an error. We discovered this need long
ago for btree, but missed the other guys.
Oh, one more thing: concurrent VACUUM is now the default.
validity checking rules for VACUUM. Make some other rearrangements of the
VACUUM code to allow more code to be shared between full and lazy VACUUM.
Minor code cleanups and added comments for TransactionId manipulations.
