There are still some loose ends: I didn't do anything about the SET FROM
CURRENT idea yet, and it's not real clear whether we are happy with the
interaction of SET LOCAL with function-local settings. The documentation
is a bit spartan, too.
Oleg Bartunov and Teodor Sigaev, but I did a lot of editorializing,
so anything that's broken is probably my fault.
Documentation is nonexistent as yet, but let's land the patch so we can
get some portability testing done.
between the setting of log_line_prefix and the setting of log_timezone. We
can't realistically set log_timezone any earlier than we do now, so the best
behavior seems to be to use GMT zone if any timestamps are to be logged during
early startup. Create a dummy zone variable with a minimal definition of GMT
(in particular it will never know about leap seconds), so that we can set it
up without reference to any external files.
displayed in the postmaster log. This avoids Windows-specific problems with
localized time zone names that are in the wrong encoding, and generally seems
like a good idea to forestall other potential platform-dependent issues.
To preserve the existing behavior that all backends will log in the same time
zone, create a new GUC variable log_timezone that can only be changed on a
system-wide basis, and reference log-related calculations to that zone instead
of the TimeZone variable.
This fixes the issue reported by Hiroshi Saito that timestamps printed by
xlog.c startup could be improperly localized on Windows. We still need a
simpler patch for that problem in the back branches, however.
before reporting a transaction committed. Data consistency is still
guaranteed (unlike setting fsync = off), but a crash may lose the effects
of the last few transactions. Patch by Simon, some editorialization by Tom.
and fsync WAL at convenient intervals. For the moment it just tries to
offload this work from backends, but soon it will be responsible for
guaranteeing a maximum delay before asynchronously-committed transactions
will be flushed to disk.
This is a portion of Simon Riggs' async-commit patch, committed to CVS
separately because a background WAL writer seems like it might be a good idea
independently of the async-commit feature. I rebased walwriter.c on
bgwriter.c because it seemed like a more appropriate way of handling signals;
while the startup/shutdown logic in postmaster.c is more like autovac because
we want walwriter to quit before we start the shutdown checkpoint.
I/O utilization, per discussion.
While at it, lower the autovacuum vacuum and analyze threshold values to 50
tuples. It is a bit higher (i.e. more conservative) than what I originally
proposed but much better than the old values for small tables.
over a fairly long period of time, rather than being spat out in a burst.
This happens only for background checkpoints carried out by the bgwriter;
other cases, such as a shutdown checkpoint, are still done at full speed.
Remove the "all buffers" scan in the bgwriter, and associated stats
infrastructure, since this seems no longer very useful when the checkpoint
itself is properly throttled.
Original patch by Itagaki Takahiro, reworked by Heikki Linnakangas,
and some minor API editorialization by me.
parse_int() and with itself (strtod allows leading whitespace, so it
seems odd not to allow trailing whitespace). parse_bool remains
not-whitespace-friendly, but this is generically true for non-numeric
GUC variables, so I'll desist from changing it.
contain a wrong unit specification, per discussion.
In passing, fix the code to avoid unnecessary integer overflows when
converting units, and to detect overflows when they do occur.
actually works sanely, viz not 0 and not more than INT_MAX/1000
(else TimestampTzPlusMilliseconds can overflow). Per discussion with
Greg Stark. Since this is a superuser-only setting and there was not
previously any big reason to change it, not worth back-patching.
within a signal handler (this might be safe given the relatively narrow code
range in which the interrupt is enabled, but it seems awfully risky); do issue
more informative log messages that tell what is being waited for and the exact
length of the wait; minor other code cleanup. Greg Stark and Tom Lane
a session regardless of the existence of cached plans. The plancache
only needs to be invalidated so that rules affected by the new setting
will be reflected in the new query plans.
Jan
tablespace(s) in which to store temp tables and temporary files. This is a
list to allow spreading the load across multiple tablespaces (a random list
element is chosen each time a temp object is to be created). Temp files are
not stored in per-database pgsql_tmp/ directories anymore, but per-tablespace
directories.
Jaime Casanova and Albert Cervera, with review by Bernd Helmle and Tom Lane.
need be returned. We keep a heap of the current best N tuples and sift-up
new tuples into it as we scan the input. For M input tuples this means
only about M*log(N) comparisons instead of M*log(M), not to mention a lot
less workspace when N is small --- avoiding spill-to-disk for large M
is actually the most attractive thing about it. Patch includes planner
and executor support for invoking this facility in ORDER BY ... LIMIT
queries. Greg Stark, with some editorialization by moi.
RESET SESSION, RESET PLANS, and RESET TEMP are now DISCARD ALL,
DISCARD PLANS, and DISCARD TEMP, respectively. This is to avoid
confusion with the pre-existing RESET variants: the DISCARD
commands are not actually similar to RESET. Patch from Marko
Kreen, with some minor editorialization.
(it's so nice to have a buildfarm member that actively rejects naked
uses of strcasecmp). This coding is still pretty awful, though, since
it's going to be O(N^2) in the number of guc variables. May I direct
your attention to bsearch?
processes to be running simultaneously. Also, now autovacuum processes do not
count towards the max_connections limit; they are counted separately from
regular processes, and are limited by the new GUC variable
autovacuum_max_workers.
The launcher now has intelligence to launch workers on each database every
autovacuum_naptime seconds, limited only on the max amount of worker slots
available.
Also, the global worker I/O utilization is limited by the vacuum cost-based
delay feature. Workers are "balanced" so that the total I/O consumption does
not exceed the established limit. This part of the patch was contributed by
ITAGAKI Takahiro.
Per discussion.
reviewed by Neil Conway. This patch adds the following DDL command
variants: RESET SESSION, RESET TEMP, RESET PLANS, CLOSE ALL, and
DEALLOCATE ALL. RESET SESSION is intended for use by connection
pool software and the like, in order to reset a client session
to something close to its initial state.
Note that while most of these command variants can be executed
inside a transaction block (but are not transaction-aware!),
RESET SESSION cannot. While this is inconsistent, it is intended
to catch programmer mistakes: RESET SESSION in an open transaction
block is probably unintended.
rules to be defined with different, per session controllable, behaviors
for replication purposes.
This will allow replication systems like Slony-I and, as has been stated
on pgsql-hackers, other products to control the firing mechanism of
triggers and rewrite rules without modifying the system catalog directly.
The firing mechanisms are controlled by a new superuser-only GUC
variable, session_replication_role, together with a change to
pg_trigger.tgenabled and a new column pg_rewrite.ev_enabled. Both
columns are a single char data type now (tgenabled was a bool before).
The possible values in these attributes are:
'O' - Trigger/Rule fires when session_replication_role is "origin"
(default) or "local". This is the default behavior.
'D' - Trigger/Rule is disabled and fires never
'A' - Trigger/Rule fires always regardless of the setting of
session_replication_role
'R' - Trigger/Rule fires when session_replication_role is "replica"
The GUC variable can only be changed as long as the system does not have
any cached query plans. This will prevent changing the session role and
accidentally executing stored procedures or functions that have plans
cached that expand to the wrong query set due to differences in the rule
firing semantics.
The SQL syntax for changing a triggers/rules firing semantics is
ALTER TABLE <tabname> <when> TRIGGER|RULE <name>;
<when> ::= ENABLE | ENABLE ALWAYS | ENABLE REPLICA | DISABLE
psql's \d command as well as pg_dump are extended in a backward
compatible fashion.
Jan
o read global SSL configuration file
o add GUC "ssl_ciphers" to control allowed ciphers
o add libpq environment variable PGSSLKEY to control SSL hardware keys
Victor B. Wagner
Standard English uses "may", "can", and "might" in different ways:
may - permission, "You may borrow my rake."
can - ability, "I can lift that log."
might - possibility, "It might rain today."
Unfortunately, in conversational English, their use is often mixed, as
in, "You may use this variable to do X", when in fact, "can" is a better
choice. Similarly, "It may crash" is better stated, "It might crash".
- Add new SQL command SET XML OPTION (also available via regular GUC) to
control the DOCUMENT vs. CONTENT option in implicit parsing and
serialization operations.
- Subtle corrections in the handling of the standalone property in
xmlroot().
- Allow xmlroot() to work on content fragments.
- Subtle corrections in the handling of the version property in
xmlconcat().
- Code refactoring for producing XML declarations.
