Be a little more vocal about the risks of remote collations not
matching local ones. Actually fixing these risks seems hard,
and I've given up on the idea that it might be back-patchable.
So the best we can do for the back branches is add documentation.
Per discussion of bug #16583 from Jiří Fejfar.
Discussion: https://postgr.es/m/2438715.1632510693@sss.pgh.pa.us
OpenSSL 3 introduced the concept of providers to support modularization,
and moved the outdated ciphers to the new legacy provider. In case it's
not loaded in the users openssl.cnf file there will be a lot of regress
test failures, so add alternative outputs covering those.
Also document the need to load the legacy provider in order to use older
ciphers with OpenSSL-enabled pgcrypto.
This will be backpatched to all supported version once there is sufficient
testing in the buildfarm of OpenSSL 3.
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/FEF81714-D479-4512-839B-C769D2605F8A@yesql.se
Backpatch-through: 9.6
Index vacuums may happen multiple times depending on the number of dead
tuples stored, as of maintenance_work_mem for a manual VACUUM. For
autovacuum, this is controlled by autovacuum_work_mem instead, if set.
The documentation mentioned the former, but not the latter in the
context of autovacuum.
Reported-by: Nikolai Berkoff
Author: Laurenz Albe, Euler Taveira
Discussion: https://postgr.es/m/161545365522.10134.12195402324485546870@wrigleys.postgresql.org
Backpatch-through: 9.6
In ec34040af I added a mention that there was no point in setting
maintenance_work_limit to anything higher than 1GB for vacuum, but that
was incorrect as ginInsertCleanup() also looks at what
maintenance_work_mem is set to during VACUUM and that's not limited to
1GB.
Here I attempt to make it more clear that the limitation is only around
the number of dead tuple identifiers that we can collect during VACUUM.
I've also added a note to autovacuum_work_mem to mention this limitation.
I didn't do that in ec34040af as I'd had some wrong-headed ideas about
just limiting the maximum value for that GUC to 1GB.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvpGwOAvunp-E-bN_rbAs3hmxMoasm5pzkYDbf36h73s7w@mail.gmail.com
Backpatch-through: 9.6, same as ec34040af
Since commit e462856a7a, pg_upgrade automatically creates a script to
update extensions, so mention that instead of ALTER EXTENSION.
Backpatch-through: 9.6
Copy-and-pasteo in 665c5855e, evidently. The 9.6 docs toolchain
whined about duplicate index entries, though our modern toolchain
doesn't. In any case, these GUCs surely are not about the
default settings of these values.
The error messages using the word "non-negative" are confusing
because it's ambiguous about whether it accepts zero or not.
This commit improves those error messages by replacing it with
less ambiguous word like "greater than zero" or
"greater than or equal to zero".
Also this commit added the note about the word "non-negative" to
the error message style guide, to help writing the new error messages.
When postgres_fdw option fetch_size was set to zero, previously
the error message "fetch_size requires a non-negative integer value"
was reported. This error message was outright buggy. Therefore
back-patch to all supported versions where such buggy error message
could be thrown.
Reported-by: Hou Zhijie
Author: Bharath Rupireddy
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/OS0PR01MB5716415335A06B489F1B3A8194569@OS0PR01MB5716.jpnprd01.prod.outlook.com
Add pg_resetxlog -u option to set the oldest xid in pg_control.
Previously -x set this value be -2 billion less than the -x value.
However, this causes the server to immediately scan all relation's
relfrozenxid so it can advance pg_control's oldest xid to be inside the
autovacuum_freeze_max_age range, which is inefficient and might disrupt
diagnostic recovery. pg_upgrade will use this option to better create
the new cluster to match the old cluster.
Reported-by: Jason Harvey, Floris Van Nee
Discussion: https://postgr.es/m/20190615183759.GB239428@rfd.leadboat.com, 87da83168c644fd9aae38f546cc70295@opammb0562.comp.optiver.com
Author: Bertrand Drouvot
Backpatch-through: 9.6
We had documentation of default_transaction_isolation et al,
but for some reason not of transaction_isolation et al.
AFAICS this is just an ancient oversight, so repair.
Per bug #17077 from Yanliang Lei.
Discussion: https://postgr.es/m/17077-ade8e166a01e1374@postgresql.org
These are the same as world and install-world respectively, but without
building or installing the documentation. There are many reasons for
wanting to be able to do this, including speed, lack of documentation
building tools, and wanting to build other formats of the documentation.
Plans for simplifying the buildfarm client code include using these
targets.
Backpatch to all live branches.
Discussion: https://postgr.es/m/6a421136-d462-b043-a8eb-e75b2861f3df@dunslane.net
The syntax summaries for CREATE FUNCTION and allied commands
made it look like LEAKPROOF is an alternative to
IMMUTABLE/STABLE/VOLATILE, when of course it is an orthogonal
option. Improve that.
Per gripe from aazamrafeeque0. Thanks to David Johnston for
suggestions.
Discussion: https://postgr.es/m/162444349581.694.5818572718530259025@wrigleys.postgresql.org
In a synchronous logical setup, locking [user] catalog tables can cause
deadlock. This is because logical decoding of transactions can lock
catalog tables to access them so exclusively locking those in transactions
can lead to deadlock. To avoid this users must refrain from having
exclusive locks on catalog tables.
Author: Takamichi Osumi
Reviewed-by: Vignesh C, Amit Kapila
Backpatch-through: 9.6
Discussion: https://www.postgresql.org/message-id/20210222222847.tpnb6eg3yiykzpky%40alap3.anarazel.de
The following parameters have been imprecise, or incorrect, about their
description (PGC_POSTMASTER or PGC_SIGHUP):
- autovacuum_work_mem (docs, as of 9.6~)
- huge_page_size (docs, as of 14~)
- max_logical_replication_workers (docs, as of 10~)
- max_sync_workers_per_subscription (docs, as of 10~)
- min_dynamic_shared_memory (docs, as of 14~)
- recovery_init_sync_method (postgresql.conf.sample, as of 14~)
- remove_temp_files_after_crash (docs, as of 14~)
- restart_after_crash (docs, as of 9.6~)
- ssl_min_protocol_version (docs, as of 12~)
- ssl_max_protocol_version (docs, as of 12~)
This commit adjusts the description of all these parameters to be more
consistent with the practice used for the others.
Revewed-by: Justin Pryzby
Discussion: https://postgr.es/m/YK2ltuLpe+FbRXzA@paquier.xyz
Backpatch-through: 9.6
Formerly we just relied on operator classes that assert longValuesOK
to eventually shorten the leaf value enough to fit on an index page.
That fails since the introduction of INCLUDE-column support (commit
09c1c6ab4), because the INCLUDE columns might alone take up more
than a page, meaning no amount of leaf-datum compaction will get
the job done. At least with spgtextproc.c, that leads to an infinite
loop, since spgtextproc.c won't throw an error for not being able
to shorten the leaf datum anymore.
To fix without breaking cases that would otherwise work, add logic
to spgdoinsert() to verify that the leaf tuple size is decreasing
after each "choose" step. Some opclasses might not decrease the
size on every single cycle, and in any case, alignment roundoff
of the tuple size could obscure small gains. Therefore, allow
up to 10 cycles without additional savings before throwing an
error. (Perhaps this number will need adjustment, but it seems
quite generous right now.)
As long as we've developed this logic, let's back-patch it.
The back branches don't have INCLUDE columns to worry about, but
this seems like a good defense against possible bugs in operator
classes. We already know that an infinite loop here is pretty
unpleasant, so having a defense seems to outweigh the risk of
breaking things. (Note that spgtextproc.c is actually the only
known opclass with longValuesOK support, so that this is all moot
for known non-core opclasses anyway.)
Per report from Dilip Kumar.
Discussion: https://postgr.es/m/CAFiTN-uxP_soPhVG840tRMQTBmtA_f_Y8N51G7DKYYqDh7XN-A@mail.gmail.com
Mention specifically that you can't call aggregates, window functions,
or procedures this way (the inability to call SRFs was already
mentioned).
Also, the claim that PQfn doesn't support NULL arguments or results
has been a lie since we invented protocol 3.0. Not sure why this
text was never updated for that, but do it now.
Discussion: https://postgr.es/m/2039442.1615317309@sss.pgh.pa.us
For some reason, the "julian" option for extract()/date_part() has
never gotten listed in the manual. Also, while Appendix B mentioned
in passing that we don't conform to the usual astronomical definition
that a Julian date starts at noon UTC, it was kind of vague about what
we do instead. Clarify that, and add an example showing how to get
the astronomical definition if you want it.
It's been like this for ages, so back-patch to all supported branches.
Discussion: https://postgr.es/m/1197050.1619123213@sss.pgh.pa.us
Previously it was documented that if using "-X none" option there was
no guarantee that all required WAL files were archived at the end of
pg_basebackup when taking a backup from the standby. But this limitation
was removed by commit 52f8a59dd9. Now, even when taking a backup
from the standby, pg_basebackup can wait for all required WAL files
to be archived. Therefore this commit removes such obsolete
description from the docs.
Also this commit adds new description about the limitation when
taking a backup from the standby, into the docs. The limitation is that
pg_basebackup cannot force the standbfy to switch to a new WAL file
at the end of backup, which may cause pg_basebackup to wait a long
time for the last required WAL file to be switched and archived,
especially when write activity on the primary is low.
Back-patch to v10 where the issue was introduced.
Reported-by: Kyotaro Horiguchi
Author: Kyotaro Horiguchi, Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/20210420.133235.1342729068750553399.horikyota.ntt@gmail.com
Comment fixes are applied on HEAD, and documentation improvements are
applied on back-branches where needed.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20210408164008.GJ6592@telsasoft.com
Backpatch-through: 9.6
Command-line options, or previous "ALTER (ROLE|DATABASE) ...
SET ROLE ..." commands, can change the value of the default role
for a session. In the presence of one of these, RESET ROLE will
change the current user identifier to the default role rather
than the session user identifier. Fix the documentation to
reflect this reality. Backpatch to all supported versions.
Author: Nathan Bossart
Reviewed-By: Laurenz Albe, David G. Johnston, Joe Conway
Reported by: Nathan Bossart
Discussion: https://postgr.es/m/flat/925134DB-8212-4F60-8AB1-B1231D750CB4%40amazon.com
Backpatch-through: 9.6
