ba2a3c2302 has added a way to check if a buffer is spread across
multiple pages with some NUMA information, via a new view
pg_buffercache_numa that depends on pg_buffercache_numa_pages(), a SQL
function. These can only be queried when support for libnuma exists,
generating an error if not.
However, it can be useful to know how shared buffers and OS pages map
when NUMA is not supported or not available. This commit expands the
capabilities around pg_buffercache_numa:
- pg_buffercache_numa_pages() is refactored as an internal function,
able to optionally process NUMA. Its SQL definition prior to this
commit is still around to ensure backward-compatibility with v1.6.
- A SQL function called pg_buffercache_os_pages() is added, able to work
with or without NUMA.
- The view pg_buffercache_numa is redefined to use
pg_buffercache_os_pages().
- A new view is added, called pg_buffercache_os_pages. This ignores
NUMA for its result processing, for a better efficiency.
The implementation is done so as there is no code duplication between
the NUMA and non-NUMA views/functions, relying on one internal function
that does the job for all of them. The module is bumped to v1.7.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Mircea Cadariu <cadariu.mircea@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/Z/fFA2heH6lpSLlt@ip-10-97-1-34.eu-west-3.compute.internal
This request allows a support function to replace a function call
appearing in FROM (typically a set-returning function) with an
equivalent SELECT subquery. The subquery will then be subject
to the planner's usual optimizations, potentially allowing a much
better plan to be generated. While the planner has long done this
automatically for simple SQL-language functions, it's now possible
for extensions to do it for functions outside that group.
Notably, this could be useful for functions that are presently
implemented in PL/pgSQL and work by generating and then EXECUTE'ing
a SQL query.
Author: Paul A Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/09de6afa-c33d-4d94-a5cb-afc6cea0d2bb@illuminatedcomputing.com
The existing range_minus function raises an exception when the range is
"split", because then the result can't be represented by a single range.
For example '[0,10)'::int4range - '[4,5)' would be '[0,4)' and '[5,10)'.
This commit adds new set-returning functions so that callers can get
results even in the case of splits. There is no risk of an exception for
multiranges, but a set-returning function lets us handle them the same
way we handle ranges.
Both functions return zero results if the subtraction would give an
empty range/multirange.
The main use-case for these functions is to implement UPDATE/DELETE FOR
PORTION OF, which must compute the application-time of "temporal
leftovers": the part of history in an updated/deleted row that was not
changed. To preserve the untouched history, we will implicitly insert
one record for each result returned by range/multirange_minus_multi.
Using a set-returning function will also let us support user-defined
types for application-time update/delete in the future.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/ec498c3d-5f2b-48ec-b989-5561c8aa2024%40illuminatedcomputing.com
Commit 792353f7d5 updated the pg_dump and pg_dumpall documentation to
clarify which statistics are not included in their output. The pg_upgrade
documentation contained a nearly identical description, but it was not updated
at the same time.
This commit updates the pg_upgrade documentation to match those changes.
Backpatch to v18, where commit 792353f7d5 was backpatched to.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Bruce Momjian <bruce@momjian.us>
Discussion: https://postgr.es/m/CAHGQGwFnfgdGz8aGWVzgFCFwoWQU7KnFFjmxinf4RkQAkzmR+w@mail.gmail.com
Backpatch-through: 18
This patch renames the sync_error_count column to sync_table_error_count
in the pg_stat_subscription_stats view. The new name makes the purpose
explicit now that a separate column exists to track sequence
synchronization errors.
Additionally, the column seq_sync_error_count is renamed to
sync_seq_error_count to maintain a consistent naming pattern, making it
easier for users to group, and query synchronization related counters.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/CALDaNm3WwJmz=-4ybTkhniB-Nf3qmFG9Zx1uKjyLLoPF5NYYXA@mail.gmail.com
The documentation did not previously mention the default values for
the --fsync-interval and --plugin options, even though pg_recvlogical --help
shows them. This omission made it harder for users to understand
the tool's behavior from the documentation alone.
This commit adds the missing default value descriptions for both options
to the pg_recvlogical documentation.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://postgr.es/m/CAHGQGwFqssPBjkWMFofGq32e_tANOeWN-cM=6biAP3nnFUXMRw@mail.gmail.com
The existing format of pg_dependencies uses a single-object JSON
structure, with each key value embedding all the knowledge about the
set attributes tracked, like:
{"1 => 5": 1.000000, "5 => 1": 0.423130}
While this is a very compact format, it is confusing to read and it is
difficult to manipulate the values within the object, particularly when
tracking multiple attributes.
The new output format introduced in this commit is a JSON array of
objects, with:
- A key named "degree", with a float value.
- A key named "attributes", with an array of attribute numbers.
- A key named "dependency", with an attribute number.
The values use the same underlying type as previously when printed, with
a new output format that shows now as follows:
[{"degree": 1.000000, "attributes": [1], "dependency": 5},
{"degree": 0.423130, "attributes": [5], "dependency": 1}]
This new format will become handy for a follow-up set of changes, so as
it becomes possible to inject extended statistics rather than require an
ANALYZE, like in a dump/restore sequence or after pg_upgrade on a new
cluster.
This format has been suggested by Tomas Vondra. The key names are
defined in the header introduced by 1f927cce44, to ease the
integration of frontend-specific changes that are still under
discussion. (Again a personal note: if anybody comes up with better
name for the keys, of course feel free.)
The bulk of the changes come from the regression tests, where
jsonb_pretty() is now used to make the outputs generated easier to
parse.
Author: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CADkLM=dpz3KFnqP-dgJ-zvRvtjsa8UZv8wDAQdqho=qN3kX0Zg@mail.gmail.com
The existing format of pg_ndistinct uses a single-object JSON structure
where each key is itself a comma-separated list of attnums, like:
{"3, 4": 11, "3, 6": 11, "4, 6": 11, "3, 4, 6": 11}
While this is a very compact format, it is confusing to read and it is
difficult to manipulate the values within the object.
The new output format introduced in this commit is an array of objects,
with:
- A key named "attributes", that contains an array of attribute numbers.
- A key named "ndistinct", represented as an integer.
The values use the same underlying type as previously when printed, with
a new output format that shows now as follows:
[{"ndistinct": 11, "attributes": [3,4]},
{"ndistinct": 11, "attributes": [3,6]},
{"ndistinct": 11, "attributes": [4,6]},
{"ndistinct": 11, "attributes": [3,4,6]}]
This new format will become handy for a follow-up set of changes, so as
it becomes possible to inject extended statistics rather than require an
ANALYZE, like in a dump/restore sequence or after pg_upgrade on a new
cluster.
This format has been suggested by Tomas Vondra. The key names are
defined in a new header, to ease with the integration of
frontend-specific changes that are still under discussion. (Personal
note: I am not specifically wedded to these key names, but if there are
better name suggestions for this release, feel free.)
The bulk of the changes come from the regression tests, where
jsonb_pretty() is now used to make the outputs generated easier to
parse.
Author: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CADkLM=dpz3KFnqP-dgJ-zvRvtjsa8UZv8wDAQdqho=qN3kX0Zg@mail.gmail.com
Path expansion might expose characters like spaces which would cause
command failure, so double-quote the examples. While %f doesn't need
quoting since it uses a fixed character set, it is best to be
consistent.
Discussion: https://postgr.es/m/aROPCQCfvKp9Htk4@momjian.us
Backpatch-through: master
This reverts commit 1fd981f053, based on concerns that the logging
improvements do not justify the protocol breakage of dropping an unnamed
portal once its execution has completed.
It seems unlikely that one would try to send an execute or describe
message after the portal has been used, but if they do such
post-completion messages would not be able to process as the previous
versions. Let's revert this change for now so as we keep compatibility
and consider a different solution.
The tests added by 76bba03312 track the pre-1fd981f05369 behavior, and
are still valid.
Discussion: https://postgr.es/m/CA+TgmoYFJyJNQw3RT7veO3M2BWRE9Aw4hprC5rOcawHZti-f8g@mail.gmail.com
Much of the "Replication Slot" chapter applies to physical and logical
slots, but it was sloppy in mentioning mostly physical slots. This
patch clarified which parts of the text apply to which slot types.
This chapter is referenced from the logical slot/subscriber chapter, so
it needs to do double duty.
Backpatch-through: master
Also mention that logical replication slots are created by default when
subscriptions are created. This should clarify the text.
Backpatch-through: master
Previously it was not clear that "physical" replication slots were being
discussed, and that they needed to be created on the primary and not the
standby.
Backpatch-through: master
On the CREATE POLICY page, the "Policies Applied by Command Type"
table was missing MERGE ... THEN DELETE and some of the policies
applied during INSERT ... ON CONFLICT and MERGE. Fix that, and try to
improve readability by listing the various MERGE cases separately,
rather than together with INSERT/UPDATE/DELETE. Mention COPY ... TO
along with SELECT, since it behaves in the same way. In addition,
document which policy violations cause errors to be thrown, and which
just cause rows to be silently ignored.
Also, a paragraph above the table states that INSERT ... ON CONFLICT
DO UPDATE only checks the WITH CHECK expressions of INSERT policies
for rows appended to the relation by the INSERT path, which is
incorrect -- all rows proposed for insertion are checked, regardless
of whether they end up being inserted. Fix that, and also mention that
the same applies to INSERT ... ON CONFLICT DO NOTHING.
In addition, in various other places on that page, clarify how the
different types of policy are applied to different commands, and
whether or not errors are thrown when policy checks do not pass.
Backpatch to all supported versions. Prior to v17, MERGE did not
support RETURNING, and so MERGE ... THEN INSERT would never check new
rows against SELECT policies. Prior to v15, MERGE was not supported at
all.
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Viktor Holmberg <v@viktorh.net>
Reviewed-by: Jian He <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CAEZATCWqnfeChjK=n1V_dYZT4rt4mnq+ybf9c0qXDYTVMsy8pg@mail.gmail.com
Backpatch-through: 14
Add documentation describing sequence synchronization support in logical
replication. It explains how sequence changes are synchronized from the
publisher to the subscriber, the configuration requirements, and provide
examples illustrating setup and usage.
Additionally, document the pg_get_sequence_data() function, which allows
users to query sequence details on the publisher to determine when to
refresh corresponding sequences on the subscriber.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CAA4eK1LC+KJiAkSrpE_NwvNdidw9F2os7GERUeSxSKv71gXysQ@mail.gmail.com
The synopsis for the ALTER PUBLICATION ... DROP ... command incorrectly
implied that a column list and WHERE clause could be specified as part of
the publication object. However, these options are not allowed for
DROP operations, making the documentation misleading.
This commit corrects the synopsis to clearly show only the valid forms
of publication objects.
Backpatched to v15, where the incorrect synopsis was introduced.
Author: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CAHut+PsPu+47Q7b0o6h1r-qSt90U3zgbAHMHUag5o5E1Lo+=uw@mail.gmail.com
Backpatch-through: 15
This commit adds a new column, seq_sync_error_count, to the
pg_stat_subscription_stats view. This counter tracks the number of errors
encountered by the sequence synchronization worker during operation.
Since a single worker handles the synchronization of all sequences, this
value may reflect errors from multiple sequences. This addition improves
observability of sequence synchronization behavior and helps monitor
potential issues during replication.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CAA4eK1LC+KJiAkSrpE_NwvNdidw9F2os7GERUeSxSKv71gXysQ@mail.gmail.com
The following parameters can only be set at server start because
their context is PGC_POSTMASTER, but this information was missing
or incorrectly documented. This commit adds or corrects
that information for the following parameters:
* debug_io_direct
* dynamic_shared_memory_type
* event_source
* huge_pages
* io_max_combine_limit
* max_notify_queue_pages
* shared_memory_type
* track_commit_timestamp
* wal_decode_buffer_size
Backpatched to all supported branches.
Author: Karina Litskevich <litskevichkarina@gmail.com>
Reviewed-by: Chao Li <lic@highgo.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CAHGQGwGfPzcin-_6XwPgVbWTOUFVZgHF5g9ROrwLUdCTfjy=0A@mail.gmail.com
Backpatch-through: 13
This section introduces temporal tables, with a focus on Application
Time (which we support) and only a brief mention of System Time (which
we don't). It covers temporal primary keys, unique constraints, and
temporal foreign keys. We will document temporal update/delete and
periods as we add those features.
This commit also adds glossary entries for temporal table, application
time, and system time.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Discussion: https://www.postgresql.org/message-id/flat/ec498c3d-5f2b-48ec-b989-5561c8aa2024@illuminatedcomputing.com
Previously, unnamed portals were kept until the next Bind message or the
end of the transaction. This could cause temporary files to persist
longer than expected and make logging not reflect the actual SQL
responsible for the temporary file.
This patch changes exec_execute_message() to drop unnamed portals
immediately after execution to completion at the end of an Execute
message, making their removal more aggressive. This forces temporary
file cleanups to happen at the same time as the completion of the portal
execution, with statement logging correctly reflecting to which
statements these temporary files were attached to (see the diffs in the
TAP test updated by this commit for an idea).
The documentation is updated to describe the lifetime of unnamed
portals, and test cases are updated to verify temporary file removal and
proper statement logging after unnamed portal execution. This changes
how unnamed portals are handled in the protocol, hence no backpatch is
done.
Author: Frédéric Yhuel <frederic.yhuel@dalibo.com>
Co-Authored-by: Sami Imseih <samimseih@gmail.com>
Co-Authored-by: Mircea Cadariu <cadariu.mircea@gmail.com>
Discussion: https://postgr.es/m/CAA5RZ0tTrTUoEr3kDXCuKsvqYGq8OOHiBwoD-dyJocq95uEOTQ%40mail.gmail.com
We have never had a SET syntax that allows setting a GUC_LIST_INPUT
parameter to be an empty list. A locution such as
SET search_path = '';
doesn't mean that; it means setting the GUC to contain a single item
that is an empty string. (For search_path the net effect is much the
same, because search_path ignores invalid schema names and '' must be
invalid.) This is confusing, not least because configuration-file
entries and the set_config() function can easily produce empty-list
values.
We considered making the empty-string syntax do this, but that would
foreclose ever allowing empty-string items to be valid in list GUCs.
While there isn't any obvious use-case for that today, it feels like
the kind of restriction that might hurt someday. Instead, let's
accept the forbidden-up-to-now value NULL and treat that as meaning an
empty list. (An objection to this could be "what if we someday want
to allow NULL as a GUC value?". That seems unlikely though, and even
if we did allow it for scalar GUCs, we could continue to treat it as
meaning an empty list for list GUCs.)
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andrei Klychkov <andrew.a.klychkov@gmail.com>
Reviewed-by: Jim Jones <jim.jones@uni-muenster.de>
Discussion: https://postgr.es/m/CA+mfrmwsBmYsJayWjc8bJmicxc3phZcHHY=yW5aYe=P-1d_4bg@mail.gmail.com
Several functions in the codebase accept "Datum *" parameters but do
not modify the pointed-to data. These have been updated to take
"const Datum *" instead, improving type safety and making the
interfaces clearer about their intent. This change helps the compiler
catch accidental modifications and better documents immutability of
arguments.
Most of "Datum *" parameters have a pairing "bool *isnull" parameter,
they are constified as well.
No functional behavior is changed by this patch.
Author: Chao Li <lic@highgo.com>
Discussion: https://www.postgresql.org/message-id/flat/CAEoWx2msfT0knvzUa72ZBwu9LR_RLY4on85w2a9YpE-o2By5HQ@mail.gmail.com
This new counter, called "wal_fpi_bytes", tracks the total amount in
bytes of full page images (FPIs) generated in WAL. This data becomes
available globally via pg_stat_wal, and for backend statistics via
pg_stat_get_backend_wal().
Previously, this information could only be retrieved with pg_waldump or
pg_walinspect, which may not be available depending on the environment,
and are expensive to execute. It offers hints about how much FPIs
impact the WAL generated, which could be a large percentage for some
workloads, as well as the effects of wal_compression or page holes.
Bump catalog version.
Bump PGSTAT_FILE_FORMAT_ID, due to the addition of wal_fpi_bytes in
PgStat_WalCounters.
Author: Shinya Kato <shinya11.kato@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAOzEurQtZEAfg6P0kU3Wa-f9BWQOi0RzJEMPN56wNTOmJLmfaQ@mail.gmail.com
