in corner cases such as re-fetching a just-deleted row. We may be able to
relax this someday, but let's find out how many people really care before
we invest a lot of work in it. Per report from Heikki and subsequent
discussion.
While in the neighborhood, make the combination of INSENSITIVE and FOR UPDATE
throw an error, since they are semantically incompatible. (Up to now we've
accepted but just ignored the INSENSITIVE option of DECLARE CURSOR.)
types of unspecified parameters when submitted via extended query protocol.
This worked in 8.2 but I had broken it during plancache changes. DECLARE
CURSOR is now treated almost exactly like a plain SELECT through parse
analysis, rewrite, and planning; only just before sending to the executor
do we divert it away to ProcessUtility. This requires a special-case check
in a number of places, but practically all of them were already special-casing
SELECT INTO, so it's not too ugly. (Maybe it would be a good idea to merge
the two by treating IntoClause as a form of utility statement? Not going to
worry about that now, though.) That approach doesn't work for EXPLAIN,
however, so for that I punted and used a klugy solution of running parse
analysis an extra time if under extended query protocol.
access to the planner's cursor-related planning options, and provide new
FETCH/MOVE routines that allow access to the full power of those commands.
Small refactoring of planner(), pg_plan_query(), and pg_plan_queries()
APIs to make it convenient to pass the planning options down from SPI.
This is the core-code portion of Pavel Stehule's patch for scrollable
cursor support in plpgsql; I'll review and apply the plpgsql changes
separately.
reviewed by Neil Conway. This patch adds the following DDL command
variants: RESET SESSION, RESET TEMP, RESET PLANS, CLOSE ALL, and
DEALLOCATE ALL. RESET SESSION is intended for use by connection
pool software and the like, in order to reset a client session
to something close to its initial state.
Note that while most of these command variants can be executed
inside a transaction block (but are not transaction-aware!),
RESET SESSION cannot. While this is inconsistent, it is intended
to catch programmer mistakes: RESET SESSION in an open transaction
block is probably unintended.
module and teach PREPARE and protocol-level prepared statements to use it.
In service of this, rearrange utility-statement processing so that parse
analysis does not assume table schemas can't change before execution for
utility statements (necessary because we don't attempt to re-acquire locks
for utility statements when reusing a stored plan). This requires some
refactoring of the ProcessUtility API, but it ends up cleaner anyway,
for instance we can get rid of the QueryContext global.
Still to do: fix up SPI and related code to use the plan cache; I'm tempted to
try to make SQL functions use it too. Also, there are at least some aspects
of system state that we want to ensure remain the same during a replan as in
the original processing; search_path certainly ought to behave that way for
instance, and perhaps there are others.
storing mostly-redundant Query trees in prepared statements, portals, etc.
To replace Query, a new node type called PlannedStmt is inserted by the
planner at the top of a completed plan tree; this carries just the fields of
Query that are still needed at runtime. The statement lists kept in portals
etc. now consist of intermixed PlannedStmt and bare utility-statement nodes
--- no Query. This incidentally allows us to remove some fields from Query
and Plan nodes that shouldn't have been there in the first place.
Still to do: simplify the execution-time range table; at the moment the
range table passed to the executor still contains Query trees for subqueries.
initdb forced due to change of stored rules.
thought that it didn't have to reposition the underlying tuplestore if the
portal is atEnd. But this is not so, because tuplestores have separate read
and write cursors ... and the read cursor hasn't moved from the start.
This mistake explains bug #2970 from William Zhang.
Note: the coding here is pretty inefficient, but given that no one has noticed
this bug until now, I'd say hardly anyone uses the case where the cursor has
been advanced before being persisted. So maybe it's not worth worrying about.
Standard English uses "may", "can", and "might" in different ways:
may - permission, "You may borrow my rake."
can - ability, "I can lift that log."
might - possibility, "It might rain today."
Unfortunately, in conversational English, their use is often mixed, as
in, "You may use this variable to do X", when in fact, "can" is a better
choice. Similarly, "It may crash" is better stated, "It might crash".
proposal. Parameter logging works even for binary-format parameters, and
logging overhead is avoided when disabled.
log_statement = all output for the src/test/examples/testlibpq3.c example
now looks like
LOG: statement: execute <unnamed>: SELECT * FROM test1 WHERE t = $1
DETAIL: parameters: $1 = 'joe''s place'
LOG: statement: execute <unnamed>: SELECT * FROM test1 WHERE i = $1::int4
DETAIL: parameters: $1 = '2'
and log_min_duration_statement = 0 results in
LOG: duration: 2.431 ms parse <unnamed>: SELECT * FROM test1 WHERE t = $1
LOG: duration: 2.335 ms bind <unnamed> to <unnamed>: SELECT * FROM test1 WHERE t = $1
DETAIL: parameters: $1 = 'joe''s place'
LOG: duration: 0.394 ms execute <unnamed>: SELECT * FROM test1 WHERE t = $1
DETAIL: parameters: $1 = 'joe''s place'
LOG: duration: 1.251 ms parse <unnamed>: SELECT * FROM test1 WHERE i = $1::int4
LOG: duration: 0.566 ms bind <unnamed> to <unnamed>: SELECT * FROM test1 WHERE i = $1::int4
DETAIL: parameters: $1 = '2'
LOG: duration: 0.173 ms execute <unnamed>: SELECT * FROM test1 WHERE i = $1::int4
DETAIL: parameters: $1 = '2'
(This example demonstrates the folly of ignoring parse/bind steps for duration
logging purposes, BTW.)
Along the way, create a less ad-hoc mechanism for determining which commands
are logged by log_statement = mod and log_statement = ddl. The former coding
was actually missing quite a few things that look like ddl to me, and it
did not handle EXECUTE or extended query protocol correctly at all.
This commit does not do anything about the question of whether log_duration
should be removed or made less redundant with log_min_duration_statement.
that has parameters is always planned afresh for each Bind command,
treating the parameter values as constants in the planner. This removes
the performance penalty formerly often paid for using out-of-line
parameters --- with this definition, the planner can do constant folding,
LIKE optimization, etc. After a suggestion by Andrew@supernews.
optionally bind. I re-added the "statement:" label so people will
understand why the line is being printed (it is log_*statement
behavior).
Use single quotes for bind values, instead of double quotes, and double
literal single quotes in bind values (and document that). I also made
use of the DETAIL line to have much cleaner output.
merely a matter of fixing the error check, since the underlying Portal
infrastructure already handles it. This in turn allows these statements
to be used in some existing plpgsql and plperl contexts, such as a
plpgsql FOR loop. Also, do some marginal code cleanup in places that
were being sloppy about distinguishing SELECT from SELECT INTO.
o print user name for all
o print portal name if defined for all
o print query for all
o reduce log_statement header to single keyword
o print bind parameters as DETAIL if text mode
tuples with less header overhead than a regular HeapTuple, per my
recent proposal. Teach TupleTableSlot code how to deal with these.
As proof of concept, change tuplestore.c to store MinimalTuples instead
of HeapTuples. Future patches will expand the concept to other places
where it is useful.
cursors. Patch from Joachim Wieland, review and ediorialization by Neil
Conway. The view lists cursors defined by DECLARE CURSOR, using SPI, or
via the Bind message of the frontend/backend protocol. This means the
view does not list the unnamed portal or the portal created to implement
EXECUTE. Because we do list SPI portals, there might be more rows in
this view than you might expect if you are using SPI implicitly (e.g.
via a procedural language).
Per recent discussion on -hackers, the query string included in the
view for cursors defined by DECLARE CURSOR is based on
debug_query_string. That means it is not accurate if multiple queries
separated by semicolons are submitted as one query string. However,
there doesn't seem a trivial fix for that: debug_query_string
is better than nothing. I also changed SPI_cursor_open() to include
the source text for the portal it creates: AFAICS there is no reason
not to do this.
Update the documentation and regression tests, bump the catversion.
performance problem pointed out by phil@vodafone: to wit, we were
spending O(N^2) time to check dropped-ness in an N-deep join tree,
even in the case where the tree was freshly constructed and couldn't
possibly mention any dropped columns. Instead of recursing in
get_rte_attribute_is_dropped(), change the data structure definition:
the joinaliasvars list of a JOIN RTE must have a NULL Const instead
of a Var at any position that references a now-dropped column. This
costs nothing during normal parse-rewrite-plan path, and instead we
have a linear-time update to make when loading a stored rule that
might contain now-dropped columns. While at it, move the responsibility
for acquring locks on relations referenced by rules into this separate
function (which I therefore chose to call AcquireRewriteLocks).
This saves effort --- namely, duplicated lock grabs in parser and rewriter
--- in the normal path at a cost of one extra non-locked heap_open()
in the stored-rule path; seems a good tradeoff. A fringe benefit is
that it is now *much* clearer that we acquire lock on relations referenced
in rules before we make any rewriter decisions based on their properties.
(I don't know of any bug of that ilk, but it wasn't exactly clear before.)
to eliminate unnecessary deadlocks. This commit adds SELECT ... FOR SHARE
paralleling SELECT ... FOR UPDATE. The implementation uses a new SLRU
data structure (managed much like pg_subtrans) to represent multiple-
transaction-ID sets. When more than one transaction is holding a shared
lock on a particular row, we create a MultiXactId representing that set
of transactions and store its ID in the row's XMAX. This scheme allows
an effectively unlimited number of row locks, just as we did before,
while not costing any extra overhead except when a shared lock actually
has to be shared. Still TODO: use the regular lock manager to control
the grant order when multiple backends are waiting for a row lock.
Alvaro Herrera and Tom Lane.
while completing execution of the cursor's query. Otherwise we get wrong
answers or even crashes from non-volatile functions called by the query.
Per report from andrew@supernews.
executing a statement that fires triggers. Formerly this time was
included in "Total runtime" but not otherwise accounted for.
As a side benefit, we avoid re-opening relations when firing non-deferred
AFTER triggers, because the trigger code can re-use the main executor's
ResultRelInfo data structure.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
prevents problems when the DECLARE is in a portal and is executed
repeatedly, as is possible in v3 protocol. Per analysis by Oliver
Jowett, though I didn't use his patch exactly.
as per recent discussions. Invent SubTransactionIds that are managed like
CommandIds (ie, counter is reset at start of each top transaction), and
use these instead of TransactionIds to keep track of subtransaction status
in those modules that need it. This means that a subtransaction does not
need an XID unless it actually inserts/modifies rows in the database.
Accordingly, don't assign it an XID nor take a lock on the XID until it
tries to do that. This saves a lot of overhead for subtransactions that
are only used for error recovery (eg plpgsql exceptions). Also, arrange
to release a subtransaction's XID lock as soon as the subtransaction
exits, in both the commit and abort cases. This avoids holding many
unique locks after a long series of subtransactions. The price is some
additional overhead in XactLockTableWait, but that seems acceptable.
Finally, restructure the state machine in xact.c to have a more orthogonal
set of states for subtransactions.
mode see a fresh snapshot for each command in the function, rather than
using the latest interactive command's snapshot. Also, suppress fresh
snapshots as well as CommandCounterIncrement inside STABLE and IMMUTABLE
functions, instead using the snapshot taken for the most closely nested
regular query. (This behavior is only sane for read-only functions, so
the patch also enforces that such functions contain only SELECT commands.)
As per my proposal of 6-Sep-2004; I note that I floated essentially the
same proposal on 19-Jun-2002, but that discussion tailed off without any
action. Since 8.0 seems like the right place to be taking possibly
nontrivial backwards compatibility hits, let's get it done now.
rather than when returning to the idle loop. This makes no particular
difference for interactively-issued queries, but it makes a big difference
for queries issued within functions: trigger execution now occurs before
the calling function is allowed to proceed. This responds to numerous
complaints about nonintuitive behavior of foreign key checking, such as
http://archives.postgresql.org/pgsql-bugs/2004-09/msg00020.php, and
appears to be required by the SQL99 spec.
Also take the opportunity to simplify the data structures used for the
pending-trigger list, rename them for more clarity, and squeeze out a
bit of space.
executed. Previously, the DECLARE would succeed but subsequent FETCHes
would fail since the parameter values supplied to DECLARE were not
propagated to the portal created for the cursor.
In support of this, add type Oids to ParamListInfo entries, which seems
like a good idea anyway since code that extracts a value can double-check
that it got the type of value it was expecting.
Oliver Jowett, with minor editorialization by Tom Lane.
possible to trap an error inside a function rather than letting it
propagate out to PostgresMain. You still have to use AbortCurrentTransaction
to clean up, but at least the error handling itself will cooperate.
keep track of portal-related resources separately from transaction-related
resources. This allows cursors to work in a somewhat sane fashion with
nested transactions. For now, cursor behavior is non-subtransactional,
that is a cursor's state does not roll back if you abort a subtransaction
that fetched from the cursor. We might want to change that later.
until Bind is received, so that actual parameter values are visible to the
planner. Make use of the parameter values for estimation purposes (but
don't fold them into the actual plan). This buys back most of the
potential loss of plan quality that ensues from using out-of-line
parameters instead of putting literal values right into the query text.
This patch creates a notion of constant-folding expressions 'for
estimation purposes only', in which case we can be more aggressive than
the normal eval_const_expressions() logic can be. Right now the only
difference in behavior is inserting bound values for Params, but it will
be interesting to look at other possibilities. One that we've seen
come up repeatedly is reducing now() and related functions to current
values, so that queries like ... WHERE timestampcol > now() - '1 day'
have some chance of being planned effectively.
Oliver Jowett, with some kibitzing from Tom Lane.
In the past, we used a 'Lispy' linked list implementation: a "list" was
merely a pointer to the head node of the list. The problem with that
design is that it makes lappend() and length() linear time. This patch
fixes that problem (and others) by maintaining a count of the list
length and a pointer to the tail node along with each head node pointer.
A "list" is now a pointer to a structure containing some meta-data
about the list; the head and tail pointers in that structure refer
to ListCell structures that maintain the actual linked list of nodes.
The function names of the list API have also been changed to, I hope,
be more logically consistent. By default, the old function names are
still available; they will be disabled-by-default once the rest of
the tree has been updated to use the new API names.
