This issue exists from the inception of this code (PG-10) but got exposed
by the recent commit ce0fdbfe97 where we are using origins in tablesync
workers. The problem was that we were sometimes sending the prepare_write
('w') message but then the actual message was not being sent and on the
subscriber side, we always expect a message after prepare_write message
which led to this bug.
I refrained from backpatching this because there is no way in the core
code to hit this prior to commit ce0fdbfe97 and we haven't received any
complaints so far.
Reported-by: Erik Rijkers
Author: Amit Kapila and Vignesh C
Tested-by: Erik Rijkers
Discussion: https://postgr.es/m/1295168140.139428.1613133237154@webmailclassic.xs4all.nl
In 955a684e04 we fixed a bug in initial snapshot creation. In the
course of which several members of struct SnapBuild were obsoleted. As
SnapBuild is serialized to disk we couldn't change the memory layout.
Unfortunately I subsequently forgot about removing the backward compat
gunk, but luckily Heikki just reminded me.
This commit bumps SNAPBUILD_VERSION, therefore breaking existing
slots (which is fine in a major release).
Author: Andres Freund
Reminded-By: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/c94be044-818f-15e3-1ad3-7a7ae2dfed0a@iki.fi
With its current design, a careless use of pg_cryptohash_final() could
would result in an out-of-bound write in memory as the size of the
destination buffer to store the result digest is not known to the
cryptohash internals, without the caller knowing about that. This
commit adds a new argument to pg_cryptohash_final() to allow such sanity
checks, and implements such defenses.
The internals of SCRAM for HMAC could be tightened a bit more, but as
everything is based on SCRAM_KEY_LEN with uses particular to this code
there is no need to complicate its interface more than necessary, and
this comes back to the refactoring of HMAC in core. Except that, this
minimizes the uses of the existing DIGEST_LENGTH variables, relying
instead on sizeof() for the result sizes. In ossp-uuid, this also makes
the code more defensive, as it already relied on dce_uuid_t being at
least the size of a MD5 digest.
This is in philosophy similar to cfc40d3 for base64.c and aef8948 for
hex.c.
Reported-by: Ranier Vilela
Author: Michael Paquier, Ranier Vilela
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/CAEudQAoqEGmcff3J4sTSV-R_16Monuz-UpJFbf_dnVH=APr02Q@mail.gmail.com
For the initial table data synchronization in logical replication, we use
a single transaction to copy the entire table and then synchronize the
position in the stream with the main apply worker.
There are multiple downsides of this approach: (a) We have to perform the
entire copy operation again if there is any error (network breakdown,
error in the database operation, etc.) while we synchronize the WAL
position between tablesync worker and apply worker; this will be onerous
especially for large copies, (b) Using a single transaction in the
synchronization-phase (where we can receive WAL from multiple
transactions) will have the risk of exceeding the CID limit, (c) The slot
will hold the WAL till the entire sync is complete because we never commit
till the end.
This patch solves all the above downsides by allowing multiple
transactions during the tablesync phase. The initial copy is done in a
single transaction and after that, we commit each transaction as we
receive. To allow recovery after any error or crash, we use a permanent
slot and origin to track the progress. The slot and origin will be removed
once we finish the synchronization of the table. We also remove slot and
origin of tablesync workers if the user performs DROP SUBSCRIPTION .. or
ALTER SUBSCRIPTION .. REFERESH and some of the table syncs are still not
finished.
The commands ALTER SUBSCRIPTION ... REFRESH PUBLICATION and
ALTER SUBSCRIPTION ... SET PUBLICATION ... with refresh option as true
cannot be executed inside a transaction block because they can now drop
the slots for which we have no provision to rollback.
This will also open up the path for logical replication of 2PC
transactions on the subscriber side. Previously, we can't do that because
of the requirement of maintaining a single transaction in tablesync
workers.
Bump catalog version due to change of state in the catalog
(pg_subscription_rel).
Author: Peter Smith, Amit Kapila, and Takamichi Osumi
Reviewed-by: Ajin Cherian, Petr Jelinek, Hou Zhijie and Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1KHJxaZS-fod-0fey=0tq3=Gkn4ho=8N4-5HWiCfu0H1A@mail.gmail.com
Currently, we get the origin id from the name and then drop the origin by
taking ExclusiveLock on ReplicationOriginRelationId. So, two concurrent
sessions can get the id from the name at the same time and then when they
try to drop the origin, one of the sessions will get the either
"tuple concurrently deleted" or "cache lookup failed for replication
origin ..".
To prevent this race condition we do the entire operation under lock. This
obviates the need for replorigin_drop() API and we have removed it so if
any extension authors are using it they need to instead use
replorigin_drop_by_name. See it's usage in pg_replication_origin_drop().
Author: Peter Smith
Reviewed-by: Amit Kapila, Euler Taveira, Petr Jelinek, and Alvaro
Herrera
Discussion: https://www.postgresql.org/message-id/CAHut%2BPuW8DWV5fskkMWWMqzt-x7RPcNQOtJQBp6SdwyRghCk7A%40mail.gmail.com
Up until now, we've held this lock when performing a checkpoint or
restartpoint, but commit 076a055acf back
in 2004 and commit 7e48b77b1c from 2009,
taken together, have removed all need for this. In the present code,
there's only ever one process entitled to attempt a checkpoint: either
the checkpointer, during normal operation, or the postmaster, during
single-user operation. So, we don't need the lock.
One possible concern in making this change is that it means that
a substantial amount of code where HOLD_INTERRUPTS() was previously
in effect due to the preceding LWLockAcquire() will now be
running without that. This could mean that ProcessInterrupts()
gets called in places from which it didn't before. However, this
seems unlikely to do very much, because the checkpointer doesn't
have any signal mapped to die(), so it's not clear how,
for example, ProcDiePending = true could happen in the first
place. Similarly with ClientConnectionLost and recovery conflicts.
Also, if there are any such problems, we might want to fix them
rather than reverting this, since running lots of code with
interrupt handling suspended is generally bad.
Patch by me, per an inquiry by Amul Sul. Review by Tom Lane
and Michael Paquier.
Discussion: http://postgr.es/m/CAAJ_b97XnBBfYeSREDJorFsyoD1sHgqnNuCi=02mNQBUMnA=FA@mail.gmail.com
Commit 69bd60672 fixed the initialization of streamed transactions for
RelationSyncEntry. It forgot to initialize the publication actions while
invalidating the RelationSyncEntry due to which even though the relation
is dropped from a particular publication we still publish its changes. Fix
it by initializing pubactions when entry got invalidated.
Author: Japin Li and Bharath Rupireddy
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CALj2ACV+0UFpcZs5czYgBpujM9p0Hg1qdOZai_43OU7bqHU_xw@mail.gmail.com
Commit 709d003fbd refactored WAL-reading code, but accidentally caused
WalSndSegmentOpen() to fail to follow a timeline switch while reading from
a historic timeline. This issue caused a standby to fail to follow a primary
on a newer timeline when WAL archiving is enabled.
If there is a timeline switch within the segment, WalSndSegmentOpen() should
read from the WAL segment belonging to the new timeline. But previously
since it failed to follow a timeline switch, it tried to read the WAL segment
with old timeline. When WAL archiving is enabled, that WAL segment with
old timeline doesn't exist because it's renamed to .partial. This leads
a primary to have tried to read non-existent WAL segment, and which caused
replication to faill with the error "ERROR: requested WAL segment ... has
already been removed".
This commit fixes WalSndSegmentOpen() so that it's able to follow a timeline
switch, to ensure that a standby is able to follow a primary on a newer
timeline even when WAL archiving is enabled.
This commit also adds the regression test to check whether a standby is
able to follow a primary on a newer timeline when WAL archiving is enabled.
Back-patch to v13 where the bug was introduced.
Reported-by: Kyotaro Horiguchi
Author: Kyotaro Horiguchi, tweaked by Fujii Masao
Reviewed-by: Alvaro Herrera, Fujii Masao
Discussion: https://postgr.es/m/20201209.174314.282492377848029776.horikyota.ntt@gmail.com
This commit addresses some issues with c3826f83 that moved the hex
decoding routine to src/common/:
- The decoding function lacked overflow checks, so when used for
security-related features it was an open door to out-of-bound writes if
not carefully used that could remain undetected. Like the base64
routines already in src/common/ used by SCRAM, this routine is reworked
to check for overflows by having the size of the destination buffer
passed as argument, with overflows checked before doing any writes.
- The encoding routine was missing. This is moved to src/common/ and
it gains the same overflow checks as the decoding part.
On failure, the hex routines of src/common/ issue an error as per the
discussion done to make them usable by frontend tools, but not by shared
libraries. Note that this is why ECPG is left out of this commit, and
it still includes a duplicated logic doing hex encoding and decoding.
While on it, this commit uses better variable names for the source and
destination buffers in the existing escape and base64 routines in
encode.c and it makes them more robust to overflow detection. The
previous core code issued a FATAL after doing out-of-bound writes if
going through the SQL functions, which would be enough to detect
problems when working on changes that impacted this area of the
code. Instead, an error is issued before doing an out-of-bound write.
The hex routines were being directly called for bytea conversions and
backup manifests without such sanity checks. The current calls happen
to not have any problems, but careless uses of such APIs could easily
lead to CVE-class bugs.
Author: Bruce Momjian, Michael Paquier
Reviewed-by: Sehrope Sarkuni
Discussion: https://postgr.es/m/20201231003557.GB22199@momjian.us
Add an executor aminsert() hint mechanism that informs index AMs that
the incoming index tuple (the tuple that accompanies the hint) is not
being inserted by execution of an SQL statement that logically modifies
any of the index's key columns.
The hint is received by indexes when an UPDATE takes place that does not
apply an optimization like heapam's HOT (though only for indexes where
all key columns are logically unchanged). Any index tuple that receives
the hint on insert is expected to be a duplicate of at least one
existing older version that is needed for the same logical row. Related
versions will typically be stored on the same index page, at least
within index AMs that apply the hint.
Recognizing the difference between MVCC version churn duplicates and
true logical row duplicates at the index AM level can help with cleanup
of garbage index tuples. Cleanup can intelligently target tuples that
are likely to be garbage, without wasting too many cycles on less
promising tuples/pages (index pages with little or no version churn).
This is infrastructure for an upcoming commit that will teach nbtree to
perform bottom-up index deletion. No index AM actually applies the hint
just yet.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Victor Yegorov <vyegorov@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=CEKFa74EScx_hFVshCOn6AA5T-ajFASTdzipdkLTNQQ@mail.gmail.com
This patch allows PREPARE-time decoding of two-phase transactions (if the
output plugin supports this capability), in which case the transactions
are replayed at PREPARE and then committed later when COMMIT PREPARED
arrives.
Now that we decode the changes before the commit, the concurrent aborts
may cause failures when the output plugin consults catalogs (both system
and user-defined).
We detect such failures with a special sqlerrcode
ERRCODE_TRANSACTION_ROLLBACK introduced by commit 7259736a6e and stop
decoding the remaining changes. Then we rollback the changes when rollback
prepared is encountered.
Author: Ajin Cherian and Amit Kapila based on previous work by Nikhil Sontakke and Stas Kelvich
Reviewed-by: Amit Kapila, Peter Smith, Sawada Masahiko, Arseny Sher, and Dilip Kumar
Tested-by: Takamichi Osumi
Discussion:
https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ruhttps://postgr.es/m/CAMGcDxeqEpWj3fTXwqhSwBdXd2RS9jzwWscO-XbeCfso6ts3+Q@mail.gmail.com
This adds six methods to the output plugin API, adding support for
streaming changes of two-phase transactions at prepare time.
* begin_prepare
* filter_prepare
* prepare
* commit_prepared
* rollback_prepared
* stream_prepare
Most of this is a simple extension of the existing methods, with the
semantic difference that the transaction is not yet committed and maybe
aborted later.
Until now two-phase transactions were translated into regular transactions
on the subscriber, and the GID was not forwarded to it. None of the
two-phase commands were communicated to the subscriber.
This patch provides the infrastructure for logical decoding plugins to be
informed of two-phase commands Like PREPARE TRANSACTION, COMMIT PREPARED
and ROLLBACK PREPARED commands with the corresponding GID.
This also extends the 'test_decoding' plugin, implementing these new
methods.
This commit simply adds these new APIs and the upcoming patch to "allow
the decoding at prepare time in ReorderBuffer" will use these APIs.
Author: Ajin Cherian and Amit Kapila based on previous work by Nikhil Sontakke and Stas Kelvich
Reviewed-by: Amit Kapila, Peter Smith, Sawada Masahiko, and Dilip Kumar
Discussion:
https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ruhttps://postgr.es/m/CAMGcDxeqEpWj3fTXwqhSwBdXd2RS9jzwWscO-XbeCfso6ts3+Q@mail.gmail.com
The patch needs test cases, reorganization, and cfbot testing.
Technically reverts commits 5c31afc49d..e35b2bad1a (exclusive/inclusive)
and 08db7c63f3..ccbe34139b.
Reported-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/E1ktAAG-0002V2-VB@gemulon.postgresql.org
This adds a key management system that stores (currently) two data
encryption keys of length 128, 192, or 256 bits. The data keys are
AES256 encrypted using a key encryption key, and validated via GCM
cipher mode. A command to obtain the key encryption key must be
specified at initdb time, and will be run at every database server
start. New parameters allow a file descriptor open to the terminal to
be passed. pg_upgrade support has also been added.
Discussion: https://postgr.es/m/CA+fd4k7q5o6Nc_AaX6BcYM9yqTbC6_pnH-6nSD=54Zp6NBQTCQ@mail.gmail.com
Discussion: https://postgr.es/m/20201202213814.GG20285@momjian.us
Author: Masahiko Sawada, me, Stephen Frost
The comments atop of this function describes behaviour in case of a
transactional WAL message only, but it accepts both transactional and
non-transactional WAL messages. Update the comments to describe
behaviour in case of non-transactional WAL message as well.
Ashutosh Bapat, rephrased by Amit Kapila
Discussion: https://postgr.es/m/CAGEoWWTTzNzHOi8bj0wfAo1siGi-YEh6wqH1oaz4DrkTJ6HbTQ@mail.gmail.com
Invent a new flag bit HASH_STRINGS to specify C-string hashing, which
was formerly the default; and add assertions insisting that exactly
one of the bits HASH_STRINGS, HASH_BLOBS, and HASH_FUNCTION be set.
This is in hopes of preventing recurrences of the type of oversight
fixed in commit a1b8aa1e4 (i.e., mistakenly omitting HASH_BLOBS).
Also, when HASH_STRINGS is specified, insist that the keysize be
more than 8 bytes. This is a heuristic, but it should catch
accidental use of HASH_STRINGS for integer or pointer keys.
(Nearly all existing use-cases set the keysize to NAMEDATALEN or
more, so there's little reason to think this restriction should
be problematic.)
Tweak hash_create() to insist that the HASH_ELEM flag be set, and
remove the defaults it had for keysize and entrysize. Since those
defaults were undocumented and basically useless, no callers
omitted HASH_ELEM anyway.
Also, remove memset's zeroing the HASHCTL parameter struct from
those callers that had one. This has never been really necessary,
and while it wasn't a bad coding convention it was confusing that
some callers did it and some did not. We might as well save a few
cycles by standardizing on "not".
Also improve the documentation for hash_create().
In passing, improve reinit.c's usage of a hash table by storing
the key as a binary Oid rather than a string; and, since that's
a temporary hash table, allocate it in CurrentMemoryContext for
neatness.
Discussion: https://postgr.es/m/590625.1607878171@sss.pgh.pa.us
We start recording changes in ReorderBufferTXN even before we reach
SNAPBUILD_CONSISTENT state so that if the commit is encountered after
reaching that we should be able to send the changes of the entire transaction.
Now, while recording changes if the reorder buffer memory has exceeded
logical_decoding_work_mem then we can start streaming if it is allowed and
we haven't yet streamed that data. However, we must not allow streaming to
start unless the snapshot has reached SNAPBUILD_CONSISTENT state.
In passing, improve the comments atop ReorderBufferResetTXN to mention the
case when we need to continue streaming after getting an error.
Author: Amit Kapila
Reviewed-by: Dilip Kumar
Discussion: https://postgr.es/m/CAA4eK1KoOH0byboyYY40NBcC7Fe812trwTa+WY3jQF7WQWZbQg@mail.gmail.com
The use of low-level hash routines is not recommended by upstream
OpenSSL since 2000, and pgcrypto already switched to EVP as of 5ff4a67.
This takes advantage of the refactoring done in 87ae969 that has
introduced the allocation and free routines for cryptographic hashes.
Since 1.1.0, OpenSSL does not publish the contents of the cryptohash
contexts, forcing any consumers to rely on OpenSSL for all allocations.
Hence, the resource owner callback mechanism gains a new set of routines
to track and free cryptohash contexts when using OpenSSL, preventing any
risks of leaks in the backend. Nothing is needed in the frontend thanks
to the refactoring of 87ae969, and the resowner knowledge is isolated
into cryptohash_openssl.c.
Note that this also fixes a failure with SCRAM authentication when using
FIPS in OpenSSL, but as there have been few complaints about this
problem and as this causes an ABI breakage, no backpatch is done.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson, Heikki Linnakangas
Discussion: https://postgr.es/m/20200924025314.GE7405@paquier.xyz
Discussion: https://postgr.es/m/20180911030250.GA27115@paquier.xyz
Two new routines to allocate a hash context and to free it are created,
as these become necessary for the goal behind this refactoring: switch
the all cryptohash implementations for OpenSSL to use EVP (for FIPS and
also because upstream does not recommend the use of low-level cryptohash
functions for 20 years). Note that OpenSSL hides the internals of
cryptohash contexts since 1.1.0, so it is necessary to leave the
allocation to OpenSSL itself, explaining the need for those two new
routines. This part is going to require more work to properly track
hash contexts with resource owners, but this not introduced here.
Still, this refactoring makes the move possible.
This reduces the number of routines for all SHA2 implementations from
twelve (SHA{224,256,386,512} with init, update and final calls) to five
(create, free, init, update and final calls) by incorporating the hash
type directly into the hash context data.
The new cryptohash routines are moved to a new file, called cryptohash.c
for the fallback implementations, with SHA2 specifics becoming a part
internal to src/common/. OpenSSL specifics are part of
cryptohash_openssl.c. This infrastructure is usable for more hash
types, like MD5 or HMAC.
Any code paths using the internal SHA2 routines are adapted to report
correctly errors, which are most of the changes of this commit. The
zones mostly impacted are checksum manifests, libpq and SCRAM.
Note that e21cbb4 was a first attempt to switch SHA2 to EVP, but it
lacked the refactoring needed for libpq, as done here.
This patch has been tested on Linux and Windows, with and without
OpenSSL, and down to 1.0.1, the oldest version supported on HEAD.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/20200924025314.GE7405@paquier.xyz
Tablesync worker runs under a single transaction but in streaming mode, we
were committing the transaction on stream_stop, stream_abort, and
stream_commit. We need to avoid committing the transaction in a streaming
mode in tablesync worker.
In passing move the call to process_syncing_tables in
apply_handle_stream_commit after clean up of stream files. This will
allow clean up of files to happen before the exit of tablesync worker
which would otherwise be handled by one of the proc exit routines.
Author: Dilip Kumar
Reviewed-by: Amit Kapila and Peter Smith
Tested-by: Peter Smith
Discussion: https://postgr.es/m/CAHut+Pt4PyKQCwqzQ=EFF=bpKKJD7XKt_S23F6L20ayQNxg77A@mail.gmail.com
Reverts 27838981be (some comments are kept). Per discussion, it does
not seem safe to relax the lock level used for this; in order for it to
be safe, there would have to be memory barriers between the point we set
the flag and the point we set the trasaction Xid, which perhaps would
not be so bad; but there would also have to be barriers at the readers'
side, which from a performance perspective might be bad.
Now maybe this analysis is wrong and it *is* safe for some reason, but
proof of that is not trivial.
Discussion: https://postgr.es/m/20201118190928.vnztes7c2sldu43a@alap3.anarazel.de
While ereport() and elog() themselves are quite cheap when the
error message level is too low to be printed, some places need to do
substantial work before they can call those macros at all. To allow
optimizing away such setup work when nothing is to be printed, make
elog.c export a new function message_level_is_interesting(elevel)
that reports whether ereport/elog will do anything. Make use of that
in various places that had ad-hoc direct tests of log_min_messages etc.
Also teach ProcSleep to use it to avoid some work. (There may well
be other places that could usefully use this; I didn't search hard.)
Within elog.c, refactor a little bit to avoid having duplicate copies
of the policy-setting logic. When that code was written, we weren't
relying on the availability of inline functions; so it had some
duplications in the name of efficiency, which I got rid of.
Alvaro Herrera and Tom Lane
Discussion: https://postgr.es/m/129515.1606166429@sss.pgh.pa.us
Copy.c has grown really large. Split it into more manageable parts:
- copy.c now contains only a few functions that are common to COPY FROM
and COPY TO.
- copyto.c contains code for COPY TO.
- copyfrom.c contains code for initializing COPY FROM, and inserting the
tuples to the correct table.
- copyfromparse.c contains code for reading from the client/file/program,
and parsing the input text/CSV/binary format into tuples.
All of these parts are fairly complicated, and fairly independent of each
other. There is a patch being discussed to implement parallel COPY FROM,
which will add a lot of new code to the COPY FROM path, and another patch
which would allow INSERTs to use the same multi-insert machinery as COPY
FROM, both of which will require refactoring that code. With those two
patches, there's going to be a lot of code churn in copy.c anyway, so now
seems like a good time to do this refactoring.
The CopyStateData struct is also split. All the formatting options, like
FORMAT, QUOTE, ESCAPE, are put in a new CopyFormatOption struct, which
is used by both COPY FROM and TO. Other state data are kept in separate
CopyFromStateData and CopyToStateData structs.
Reviewed-by: Soumyadeep Chakraborty, Erik Rijkers, Vignesh C, Andres Freund
Discussion: https://www.postgresql.org/message-id/8e15b560-f387-7acc-ac90-763986617bfb%40iki.fi
We don't actually need a lock to set PGPROC->statusFlags itself; what we
do need is a shared lock on either XidGenLock or ProcArrayLock in order to
ensure MyProc->pgxactoff keeps still while we modify the mirror array in
ProcGlobal->statusFlags. Some places were using an exclusive lock for
that, which is excessive. Relax those to use shared lock only.
procarray.c has a couple of places with somewhat brittle assumptions
about PGPROC changes: ProcArrayEndTransaction uses only shared lock, so
it's permissible to change MyProc only. On the other hand,
ProcArrayEndTransactionInternal also changes other procs, so it must
hold exclusive lock. Add asserts to ensure those assumptions continue
to hold.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20201117155501.GA13805@alvherre.pgsql
In streaming mode, the transaction can be decoded in multiple streams and
those streams can be interleaved with streams of other transactions. So,
we can't remember the transaction's write status in the logical decoding
context because that might get changed due to some other transactions and
lead to wrong answers for 'skip-empty-xacts' option. We decided to keep
each transaction's write status in the ReorderBufferTxn to avoid
interleaved streams changing the status of some unrelated transactions.
Diagnosed-by: Amit Kapila
Author: Dilip Kumar
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1LR7=XNM_TLmpZMFuV8ZQpoxkem--NZJYf8YXmesbvwLA@mail.gmail.com
This was marked as BYTEA, but is more like TEXT, which is how we already
pass the history timeline file name. Internally, we don't do any
encoding or bytea escape handling, but TEXT seems closest. This should
cause no behavioral change.
Reported-by: Brar Piening
Discussion: https://postgr.es/m/6a1b9cd9-17e3-df67-be55-86102af6bdf5@gmx.de
Backpatch-through: master
Commit 1e53fe0e70 changed background processes so that they use
standard SIGHUP handler. Like that, this commit makes walreceiver
use standard SIGHUP and SIGTERM handlers, to simplify the code.
As the side effect of this commit, walreceiver can wake up and process
the configuration files promptly when receiving SIGHUP. Because the
standard SIGHUP handler sets the latch. On the other hand, previously
there could be a time lag between the receipt of SIGHUP and
the process of configuration files since the dedicated handler didn't
set the latch.
Author: Bharath Rupireddy, tweaked by Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/CALj2ACXPorUqePswDtOeM_s82v9RW32E1fYmOPZ5NuE+TWKj_A@mail.gmail.com
Attempting to take a base backup with Postgres linking to a build of
OpenSSL with FIPS enabled currently fails with or even without a backup
manifest requested because of this mandatory SHA256 initialization used
for the manifest file itself. However, there is no need to do this
initialization at all if backup manifests are not needed because there
is no data to append to the manifest.
Note that being able to use backup manifests with OpenSSL+FIPS requires
a switch of the SHA2 implementation to use EVP, which would cause an ABI
breakage so this cannot be backpatched to 13 as it has been already
released, but at least avoiding this SHA256 initialization gives users
the possibility to take a base backup even when specifying --no-manifest
with pg_basebackup.
Author: Michael Paquier
Discussion: https://postgr.es/m/20201110020014.GE1887@paquier.xyz
Backpatch-through: 13
Introduce TimestampDifferenceMilliseconds() to simplify callers
that would rather have the difference in milliseconds, instead of
the select()-oriented seconds-and-microseconds format. This gets
rid of at least one integer division per call, and it eliminates
some apparently-easy-to-mess-up arithmetic.
Two of these call sites were in fact wrong:
* pg_prewarm's autoprewarm_main() forgot to multiply the seconds
by 1000, thus ending up with a delay 1000X shorter than intended.
That doesn't quite make it a busy-wait, but close.
* postgres_fdw's pgfdw_get_cleanup_result() thought it needed to compute
microseconds not milliseconds, thus ending up with a delay 1000X longer
than intended. Somebody along the way had noticed this problem but
misdiagnosed the cause, and imposed an ad-hoc 60-second limit rather
than fixing the units. This was relatively harmless in context, because
we don't care that much about exactly how long this delay is; still,
it's wrong.
There are a few more callers of TimestampDifference() that don't
have a direct need for seconds-and-microseconds, but can't use
TimestampDifferenceMilliseconds() either because they do need
microsecond precision or because they might possibly deal with
intervals long enough to overflow 32-bit milliseconds. It might be
worth inventing another API to improve that, but that seems outside
the scope of this patch; so those callers are untouched here.
Given the fact that we are fixing some bugs, and the likelihood
that future patches might want to back-patch code that uses this
new API, back-patch to all supported branches.
Alexey Kondratov and Tom Lane
Discussion: https://postgr.es/m/3b1c053a21c07c1ed5e00be3b2b855ef@postgrespro.ru
Move the system catalog index declarations from catalog/indexing.h to
the respective parent tables' catalog/pg_*.h files. The original
reason for having it split was that the old genbki system produced the
output in the order of the catalog files it read, so all the indexing
stuff needed to come separately. But this is no longer the case, and
keeping it together makes more sense.
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/c7cc82d6-f976-75d6-2e3e-b03d2cab26bb@2ndquadrant.com
Logical replication protocol uses a single byte character to identify a
message type in logical replication protocol. The code uses string
literals for the same. Use Enum so that
1. All the string literals used can be found at a single place. This
makes it easy to add more types without the risk of conflicts.
2. It's easy to locate the code handling a given message type.
3. When used with switch statements, it is easy to identify the missing
cases using -Wswitch.
Author: Ashutosh Bapat
Reviewed-by: Kyotaro Horiguchi, Andres Freund, Peter Smith and Amit Kapila
Discussion: https://postgr.es/m/CAExHW5uPzQ7L0oAd_ENyvaiYMOPgkrAoJpE+ZY5-obdcVT6NPg@mail.gmail.com
This adds the statistics about transactions streamed to the decoding
output plugin from ReorderBuffer. Users can query the
pg_stat_replication_slots view to check these stats and call
pg_stat_reset_replication_slot to reset the stats of a particular slot.
Users can pass NULL in pg_stat_reset_replication_slot to reset stats of
all the slots.
Commit 9868167500 has added the basic infrastructure to capture the stats
of slot and this commit extends the statistics collector to track
additional information about slots.
Bump the catversion as we have added new columns in the catalog entry.
Author: Ajin Cherian and Amit Kapila
Reviewed-by: Sawada Masahiko and Dilip Kumar
Discussion: https://postgr.es/m/CAA4eK1+chpEomLzgSoky-D31qev19AmECNiEAietPQUGEFhtVA@mail.gmail.com
