cases. This was not needed in the existing uses within selfuncs.c, but if
we're gonna export it for general use, the extra generality seems helpful.
Motivated by looking at ltree example.
transaction_timestamp() (just like now()).
Also update statement_timeout() to mention it is statement arrival time
that is measured.
Catalog version updated.
not named ones, and replace linear searches of the list with array indexing.
The named-parameter support has been dead code for many years anyway,
and recent profiling suggests that the searching was costing a noticeable
amount of performance for complex queries.
of rejecting palloc(0). Also, tweak like_selectivity() to avoid assuming
the presented pattern is nonempty; although that assumption is valid,
it doesn't really help much, and the new coding is more correct anyway
since it properly handles redundant wildcards. In combination these
changes should eliminate a Coverity warning noted by Martijn.
alternatives ("|" symbol). The original coding allowed the added ^ and $
constraints to be absorbed into the first and last alternatives, producing
a pattern that would match more than it should. Per report from Eric Noriega.
I also changed the pattern to add an ARE director ("***:"), ensuring that
SIMILAR TO patterns do not change behavior if regex_flavor is changed. This
is necessary to make the non-capturing parentheses work, and seems like a
good idea on general principles.
Back-patched as far as 7.4. 7.3 also has the bug, but a fix seems impractical
because that version's regex engine doesn't have non-capturing parens.
when trying to locate the referent of a RECORD variable. This fixes the
'record type has not been registered' failure reported by Stefan
Kaltenbrunner about a month ago. A side effect of the way I chose to
fix it is that most variable references in join conditions will now be
properly labeled with the variable's source table name, instead of the
not-too-helpful 'outer' or 'inner' we used to use.
that apply the necessary domain constraint checks immediately. This fixes
cases where domain constraints went unchecked for statement parameters,
PL function local variables and results, etc. We can also eliminate existing
special cases for domains in places that had gotten it right, eg COPY.
Also, allow domains over domains (base of a domain is another domain type).
This almost worked before, but was disallowed because the original patch
hadn't gotten it quite right.
functions are not strict, they will be called (passing a NULL first parameter)
during any attempt to input a NULL value of their datatype. Currently, all
our input functions are strict and so this commit does not change any
behavior. However, this will make it possible to build domain input functions
that centralize checking of domain constraints, thereby closing numerous holes
in our domain support, as per previous discussion.
While at it, I took the opportunity to introduce convenience functions
InputFunctionCall, OutputFunctionCall, etc to use in code that calls I/O
functions. This eliminates a lot of grotty-looking casts, but the main
motivation is to make it easier to grep for these places if we ever need
to touch them again.
The original coding stored the raw parser output (ColumnDef and TypeName
nodes) which was ugly, bulky, and wrong because it failed to create any
dependency on the referenced datatype --- and in fact would not track type
renamings and suchlike. Instead store a list of column type OIDs in the
RTE.
Also fix up general failure of recordDependencyOnExpr to do anything sane
about recording dependencies on datatypes. While there are many cases where
there will be an indirect dependency (eg if an operator returns a datatype,
the dependency on the operator is enough), we do have to record the datatype
as a separate dependency in examples like CoerceToDomain.
initdb forced because of change of stored rules.
during parse analysis, not only errors detected in the flex/bison stages.
This is per my earlier proposal. This commit includes all the basic
infrastructure, but locations are only tracked and reported for errors
involving column references, function calls, and operators. More could
be done later but this seems like a good set to start with. I've also
moved the ReportSyntaxErrorPosition logic out of psql and into libpq,
which should make it available to more people --- even within psql this
is an improvement because warnings weren't handled by ReportSyntaxErrorPosition.
similar constants if they were not previously defined. All these
constants must be defined by limits.h according to C89, so we can
safely assume they are present.
var_samp(), stddev_pop(), and stddev_samp(). var_samp() and stddev_samp()
are just renamings of the historical Postgres aggregates variance() and
stddev() -- the latter names have been kept for backward compatibility.
This patch includes updates for the documentation and regression tests.
The catversion has been bumped.
NB: SQL2003 requires that DISTINCT not be specified for any of these
aggregates. Per discussion on -patches, I have NOT implemented this
restriction: if the user asks for stddev(DISTINCT x), presumably they
know what they are doing.
not likely ever to be implemented seeing it's been removed from SQL2003.
This allows getting rid of the 'filter' version of yylex() that we had in
parser.c, which should save at least a few microseconds in parsing.
- new function justify_interval(interval)
- modified function justify_hours(interval)
- modified function justify_days(interval)
These functions are defined to meet the requirements as discussed in
this thread. Specifically:
- justify_hours makes certain the sign bit on the hours
matches the sign bit on the days. It only checks the
sign bit on the days, and not the months, when
determining if the hours should be positive or negative.
After the call, -24 < hours < 24.
- justify_days makes certain the sign bit on the days
matches the sign bit on the months. It's behavior does
not depend on the hours, nor does it modify the hours.
After the call, -30 < days < 30.
- justify_interval makes sure the sign bits on all three
fields months, days, and hours are all the same. After
the call, -24 < hours < 24 AND -30 < days < 30.
Mark Dilger
are unnecessarily allocated on the heap rather than the stack. If the
StringInfo doesn't outlive the stack frame in which it is created,
there is no need to allocate it on the heap via makeStringInfo() --
stack allocation is faster. While it's not a big deal unless the
code is in a critical path, I don't see a reason not to save a few
cycles -- using stack allocation is not less readable.
I also cleaned up a bit of code along the way: moved variable
declarations into a more tightly-enclosing scope where possible,
fixed some pointless copying of strings in dblink, etc.
creation of a shell type. This allows a less hacky way of dealing with
the mutual dependency between a datatype and its I/O functions: make a
shell type, then make the functions, then define the datatype fully.
We should fix pg_dump to handle things this way, but this commit just deals
with the backend.
Martijn van Oosterhout, with some corrections by Tom Lane.
the format on Tuple(Numeric) and the format to calculate(NumericVar)
are different. I understood that to reduce I/O. However, when many
comparisons or calculations of NUMERIC are executed, the conversion
of Numeric and NumericVar becomes a bottleneck.
It is profile result when "create index on NUMERIC column" is executed:
% cumulative self self total
time seconds seconds calls s/call s/call name
17.61 10.27 10.27 34542006 0.00 0.00 cmp_numerics
11.90 17.21 6.94 34542006 0.00 0.00 comparetup_index
7.42 21.54 4.33 71102587 0.00 0.00 AllocSetAlloc
7.02 25.64 4.09 69084012 0.00 0.00 set_var_from_num
4.87 28.48 2.84 69084012 0.00 0.00 alloc_var
4.79 31.27 2.79 142205745 0.00 0.00 AllocSetFreeIndex
4.55 33.92 2.65 34542004 0.00 0.00 cmp_abs
4.07 36.30 2.38 71101189 0.00 0.00 AllocSetFree
3.83 38.53 2.23 69084012 0.00 0.00 free_var
The create index command executes many comparisons of Numeric values.
Functions other than comparetup_index spent a lot of cycles for
conversion from Numeric to NumericVar.
An attached patch enables the comparison of Numeric values without
executing conversion to NumericVar. The execution time of that SQL
becomes half.
o Test SQL (index_test table has 1,000,000 tuples)
create index index_test_idx on index_test(num_col);
o Test results (executed the test five times)
(1)PentiumIII
original: 39.789s 36.823s 36.737s 37.752s 37.019s
patched : 18.560s 19.103s 18.830s 18.408s 18.853s
4.07 36.30 2.38 71101189 0.00 0.00 AllocSetFree
3.83 38.53 2.23 69084012 0.00 0.00 free_var
The create index command executes many comparisons of Numeric values.
Functions other than comparetup_index spent a lot of cycles for
conversion from Numeric to NumericVar.
An attached patch enables the comparison of Numeric values without
executing conversion to NumericVar. The execution time of that SQL
becomes half.
o Test SQL (index_test table has 1,000,000 tuples)
create index index_test_idx on index_test(num_col);
o Test results (executed the test five times)
(1)PentiumIII
original: 39.789s 36.823s 36.737s 37.752s 37.019s
patched : 18.560s 19.103s 18.830s 18.408s 18.853s
(2)Pentium4
original: 16.349s 14.997s 12.979s 13.169s 12.955s
patched : 7.005s 6.594s 6.770s 6.740s 6.828s
(3)Itanium2
original: 15.392s 15.447s 15.350s 15.370s 15.417s
patched : 7.413s 7.330s 7.334s 7.339s 7.339s
(4)Ultra Sparc
original: 64.435s 59.336s 59.332s 58.455s 59.781s
patched : 28.630s 28.666s 28.983s 28.744s 28.595s
Atsushi Ogawa
While we normally prefer the notation "foo.*" for a whole-row Var, that does
not work at SELECT top level, because in that context the parser will assume
that what is wanted is to expand the "*" into a list of separate target
columns, yielding behavior different from a whole-row Var. We have to emit
just "foo" instead in that context. Per report from Sokolov Yura.
and rely exclusively on the SQL type system to tell the difference between
the types. Prevent creation of invalid CIDR values via casting from INET
or set_masklen() --- both of these operations now silently zero any bits
to the right of the netmask. Remove duplicate CIDR comparison operators,
letting the type rely on the INET operators instead.
Continue to support GRANT ON [TABLE] for sequences for backward
compatibility; issue warning for invalid sequence permissions.
[Backward compatibility warning message.]
Add USAGE permission for sequences that allows only currval() and
nextval(), not setval().
Mention object name in grant/revoke warnings because of possible
multi-object operations.
