We have had multiple reports that point to the
'@colReorder=latn-digit' collation customization being buggy. We have
reported this to ICU and are waiting for a fix. In the meantime,
remove references to this from the documentation and replace it by
another reordering example. Apparently, many users have been picking
up this example specifically from the documentation.
Author: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Discussion: https://www.postgresql.org/message-id/flat/153201618542.1404.3611626898935613264%40wrigleys.postgresql.org
Commit 15cb2bd27 neglected to make the running text match the
tables, leaving the reader with the strong impression that
we cannot count. Also, don't drop an unrelated para between
a table and the para describing it.
The previous version of the docs mentioned that files are rewritten,
implying that a second copy of each file gets created, but each file is
updated in-place.
Author: Michael Banck
Reviewed-by: Daniel Gustafsson, Michael Paquier
Discussion: https://postgr.es/m/858086b6a42fb7d17995b6175856f7e7ec44d0a2.camel@credativ.de
Backpatch-through: 12
The majority of our audience is probably using a pre-packaged Postgres
build rather than raw sources. For them, much of runtime.sgml is not
too relevant, and they should be reading the packager's docs instead.
Add some notes pointing that way in appropriate places.
Text by me; thanks to Daniel Gustafsson for review and discussion,
and to Laurenz Albe for an earlier version.
Discussion: https://postgr.es/m/159430831443.16535.11360317280100947016@wrigleys.postgresql.org
We were already raising an error for DROP INDEX CONCURRENTLY on a
partitioned table, albeit a different and confusing one:
ERROR: DROP INDEX CONCURRENTLY must be first action in transaction
Change that to throw a more comprehensible error:
ERROR: cannot drop partitioned index \"%s\" concurrently
Michael Paquier authored the test case for indexes on temporary
partitioned tables.
Backpatch to 11, where indexes on partitioned tables were added.
Reported-by: Jan Mussler <jan.mussler@zalando.de>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/16594-d2956ca909585067@postgresql.org
Per discussion, we're planning to remove parser support for postfix
operators in order to simplify the grammar. So it behooves us to
put out a deprecation notice at least one release before that.
There is only one built-in postfix operator, ! for factorial.
Label it deprecated in the docs and in pg_description, and adjust
some examples that formerly relied on it. (The sister prefix
operator !! is also deprecated. We don't really have to remove
that one, but since we're suggesting that people use factorial()
instead, it seems better to remove both operators.)
Also state in the CREATE OPERATOR ref page that postfix operators
in general are going away.
Although this changes the initial contents of pg_description,
I did not force a catversion bump; it doesn't seem essential.
In v13, also back-patch 4c5cf5431, so that there's someplace for
the <link>s to point to.
Mark Dilger and John Naylor, with some adjustments by me
Discussion: https://postgr.es/m/BE2DF53D-251A-4E26-972F-930E523580E9@enterprisedb.com
Commit ce77abe63c allowed EXPLAIN (BUFFERS) to report the information
on buffer usage during planning phase. However three issues were
reported regarding this feature.
(1) Previously, EXPLAIN option BUFFERS required ANALYZE. So the query
had to be actually executed by specifying ANALYZE even when we
want to see only the planner's buffer usage. This was inconvenient
especially when the query was write one like DELETE.
(2) EXPLAIN included the planner's buffer usage in summary
information. So SUMMARY option had to be enabled to report that.
Also this format was confusing.
(3) The output structure for planning information was not consistent
between TEXT format and the others. For example, "Planning" tag
was output in JSON format, but not in TEXT format.
For (1), this commit allows us to perform EXPLAIN (BUFFERS) without
ANALYZE to report the planner's buffer usage.
For (2), this commit changed EXPLAIN output so that the planner's
buffer usage is reported before summary information.
For (3), this commit made the output structure for planning
information more consistent between the formats.
Back-patch to v13 where the planner's buffer usage was allowed to
be reported in EXPLAIN.
Reported-by: Pierre Giraud, David Rowley
Author: Fujii Masao
Reviewed-by: David Rowley, Julien Rouhaud, Pierre Giraud
Discussion: https://postgr.es/m/07b226e6-fa49-687f-b110-b7c37572f69e@dalibo.com
When the leftover invalid index is "ccold", there's no need to re-run
the command. Reword the instructions to make that explicit.
Backpatch to 12, where REINDEX CONCURRENTLY appeared.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/20200819211312.GA15497@alvherre.pgsql
Put the -r option in the right section (it certainly isn't an
option controlling "the location and format of the output").
Clarify the behavior of the tablespace and waldir options
(that part per gripe from robert@interactive.co.uk).
Make a large number of small copy-editing fixes in text that
visibly wasn't written by native speakers, and try to avoid
grammatical inconsistencies between the descriptions of
the different options.
Back-patch to v13, since HEAD hasn't meaningfully diverged yet.
Discussion: https://postgr.es/m/159749418850.14322.216503677134569752@wrigleys.postgresql.org
The SimpleLruTruncate() header comment states the new coding rule. To
achieve this, add locktype "frozenid" and two LWLocks. This closes a
rare opportunity for data loss, which manifested as "apparent
wraparound" or "could not access status of transaction" errors. Data
loss is more likely in pg_multixact, due to released branches' thin
margin between multiStopLimit and multiWrapLimit. If a user's physical
replication primary logged ": apparent wraparound" messages, the user
should rebuild standbys of that primary regardless of symptoms. At less
risk is a cluster having emitted "not accepting commands" errors or
"must be vacuumed" warnings at some point. One can test a cluster for
this data loss by running VACUUM FREEZE in every database. Back-patch
to 9.5 (all supported versions).
Discussion: https://postgr.es/m/20190218073103.GA1434723@rfd.leadboat.com
Up to now, upon receipt of a SIGTERM ("smart shutdown" command), the
postmaster has immediately killed all "optional" background processes,
and subsequently refused to launch new ones while it's waiting for
foreground client processes to exit. No doubt this seemed like an OK
policy at some point; but it's a pretty bad one now, because it makes
for a seriously degraded environment for the remaining clients:
* Parallel queries are killed, and new ones fail to launch. (And our
parallel-query infrastructure utterly fails to deal with the case
in a reasonable way --- it just hangs waiting for workers that are
not going to arrive. There is more work needed in that area IMO.)
* Autovacuum ceases to function. We can tolerate that for awhile,
but if bulk-update queries continue to run in the surviving client
sessions, there's eventually going to be a mess. In the worst case
the system could reach a forced shutdown to prevent XID wraparound.
* The bgwriter and walwriter are also stopped immediately, likely
resulting in performance degradation.
Hence, let's rearrange things so that the only immediate change in
behavior is refusing to let in new normal connections. Once the last
normal connection is gone, shut everything down as though we'd received
a "fast" shutdown. To implement this, remove the PM_WAIT_BACKUP and
PM_WAIT_READONLY states, instead staying in PM_RUN or PM_HOT_STANDBY
while normal connections remain. A subsidiary state variable tracks
whether or not we're letting in new connections in those states.
This also allows having just one copy of the logic for killing child
processes in smart and fast shutdown modes. I moved that logic into
PostmasterStateMachine() by inventing a new state PM_STOP_BACKENDS.
Back-patch to 9.6 where parallel query was added. In principle
this'd be a good idea in 9.5 as well, but the risk/reward ratio
is not as good there, since lack of autovacuum is not a problem
during typical uses of smart shutdown.
Per report from Bharath Rupireddy.
Patch by me, reviewed by Thomas Munro
Discussion: https://postgr.es/m/CALj2ACXAZ5vKxT9P7P89D87i3MDO9bfS+_bjMHgnWJs8uwUOOw@mail.gmail.com
Make these examples self-contained by providing declarations of the
user-defined row types they rely on. There wasn't room to do this
in the old doc format, but now there is, and I think it makes the
examples a good bit less confusing.
Hostile objects located within the installation-time search_path could
capture references in an extension's installation or upgrade script.
If the extension is being installed with superuser privileges, this
opens the door to privilege escalation. While such hazards have existed
all along, their urgency increases with the v13 "trusted extensions"
feature, because that lets a non-superuser control the installation path
for a superuser-privileged script. Therefore, make a number of changes
to make such situations more secure:
* Tweak the construction of the installation-time search_path to ensure
that references to objects in pg_catalog can't be subverted; and
explicitly add pg_temp to the end of the path to prevent attacks using
temporary objects.
* Disable check_function_bodies within installation/upgrade scripts,
so that any security gaps in SQL-language or PL-language function bodies
cannot create a risk of unwanted installation-time code execution.
* Adjust lookup of type input/receive functions and join estimator
functions to complain if there are multiple candidate functions. This
prevents capture of references to functions whose signature is not the
first one checked; and it's arguably more user-friendly anyway.
* Modify various contrib upgrade scripts to ensure that catalog
modification queries are executed with secure search paths. (These
are in-place modifications with no extension version changes, since
it is the update process itself that is at issue, not the end result.)
Extensions that depend on other extensions cannot be made fully secure
by these methods alone; therefore, revert the "trusted" marking that
commit eb67623c9 applied to earthdistance and hstore_plperl, pending
some better solution to that set of issues.
Also add documentation around these issues, to help extension authors
write secure installation scripts.
Patch by me, following an observation by Andres Freund; thanks
to Noah Misch for review.
Security: CVE-2020-14350
This contains all individuals mentioned in the commit messages during
PostgreSQL 13 development.
current through 79a3ab1e98d6b5952e29ad91e07c0e9fc777cc0b
