Previously, ALTER DEFAULT PRIVILEGES did not support large objects.
This meant that to grant privileges to users other than the owner,
permissions had to be manually assigned each time a large object
was created, which was inconvenient.
This commit extends ALTER DEFAULT PRIVILEGES to allow defining default
access privileges for large objects. With this change, specified privileges
will automatically apply to newly created large objects, making privilege
management more efficient.
As a side effect, this commit introduces the new keyword OBJECTS
since it's used in the syntax of ALTER DEFAULT PRIVILEGES.
Original patch by Haruka Takatsuka, with some fixes and tests by Yugo Nagata,
and rebased by Laurenz Albe.
Author: Takatsuka Haruka <harukat@sraoss.co.jp>
Co-authored-by: Yugo Nagata <nagata@sraoss.co.jp>
Co-authored-by: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Masao Fujii <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/20240424115242.236b499b2bed5b7a27f7a418@sraoss.co.jp
The regression test for logical decoding verifies whether a logical slot
is correctly dropped on a standby when its associated database is dropped.
However, the test mistakenly retrieved slot information from the primary
instead of the standby, causing incorrect behavior.
This commit fixes the issue by ensuring the test correctly checks the slot
on the standby.
Back-patch to all supported versions.
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/1fdfd020-a509-403c-bd8f-a04664aba148@oss.nttdata.com
Backpatch-through: 13
The regression tests for logical decoding verify whether a logical slot
exists or has been dropped. Previously, these tests attempted to
retrieve "slot_name" from the result of slot(), but since "slot_name" was
not included in the result, slot()->{'slot_name'} always returned undef,
leading to incorrect behavior.
This commit fixes the issue by checking the "plugin" field in the result
of slot() instead, ensuring the tests properly verify slot existence.
Back-patch to all supported versions.
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/OSCPR01MB149667EC4E738769CA80B7EA5F5AE2@OSCPR01MB14966.jpnprd01.prod.outlook.com
Backpatch-through: 13
As coded, fmgr_sql() would get an assertion failure for a SQL function
that has an empty body and is declared to return some type other than
VOID. Typically you'd never get that far because fmgr_sql_validator()
would reject such a definition (I suspect that's how come I managed to
miss the bug). But if check_function_bodies is off or the function is
polymorphic, the validation check wouldn't get made.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/0fde377a-3870-4d18-946a-ce008ee5bb88@gmail.com
The connect_timeout=1 setting for the --hang-forever test was left in
place and used by later tests, causing unexpected timeouts on slower
buildfarm animals. Remove it when no longer needed.
Per buildfarm member skink, reported by Andres on Discord.
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Reported-by: Andres Freund <andres@anarazel.de>
register_socket() missed a variable declaration if neither
HAVE_SYS_EPOLL_H nor HAVE_SYS_EVENT_H was defined.
While we're fixing that, adjust the tests to check pg_config.h for one
of the multiplexer implementations, rather than assuming that Windows is
the only platform without support. (Christoph reported this on
hurd-amd64, an experimental Debian.)
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Reported-by: Christoph Berg <myon@debian.org>
Discussion: https://postgr.es/m/Z-sPFl27Y0ZC-VBl%40msg.df7cb.de
Previously, invalidated logical and physical replication slots could
be copied using the pg_copy_logical_replication_slot and
pg_copy_physical_replication_slot functions. Replication slots that
were invalidated for reasons other than WAL removal retained their
restart_lsn. This meant that a new slot copied from an invalidated
slot could have a restart_lsn pointing to a WAL segment that might
have already been removed.
This commit restricts the copying of invalidated replication slots.
Backpatch to v16, where slots could retain their restart_lsn when
invalidated for reasons other than WAL removal.
For v15 and earlier, this check is not required since slots can only
be invalidated due to WAL removal, and existing checks already handle
this issue.
Author: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Reviewed-by: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CANhcyEU65aH0VYnLiu%3DOhNNxhnhNhwcXBeT-jvRe1OiJTo_Ayg%40mail.gmail.com
Backpatch-through: 16
The issue is that the transactions prepared before two-phase decoding is
enabled can fail to replicate to the subscriber after being committed on a
promoted standby following a failover. This is because the two_phase_at
field of a slot, which tracks the LSN from which two-phase decoding
starts, is not synchronized to standby servers. Without two_phase_at, the
logical decoding might incorrectly identify prepared transaction as
already replicated to the subscriber after promotion of standby server,
causing them to be skipped.
To address the issue on HEAD, the two_phase_at field of the slot is
exposed by the pg_replication_slots view and allows the slot
synchronization to copy this value to the corresponding synced slot on the
standby server.
This bug is likely to occur if the user toggles the two_phase option to
true after initial slot creation. Given that altering the two_phase option
of a replication slot is not allowed in PostgreSQL 17, this bug is less
likely to occur. We can't change the view/function definition in
backbranch so we can't push the same fix but we are brainstorming an
appropriate solution for PG17.
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/TYAPR01MB5724CC7C288535BBCEEE65DA94A72@TYAPR01MB5724.jpnprd01.prod.outlook.com
In the previous commit HeapBitmapScan's skip_fetch optimization was removed,
due to being broken in not easily fixable ways. Add a test that verifies we
don't re-introduce this bug if somebody tries to re-add the feature.
Only add the test to master for now, it's possible it's not entirely
stable. That seems sufficient, as we're not going to re-introduce the feature
on the backbranches. I did verify that the test passes on all branches. If the
test turns out to be unproblematic, we can backpatch it later, should we feel
a need to do so.
Discussion: https://postgr.es/m/CAEze2Wg3gXXZTr6_rwC+s4-o2ZVFB5F985uUSgJTsECx6AmGcQ@mail.gmail.com
In the historical implementation of SQL functions (if they don't get
inlined), we built plans for all the contained queries at first call
within an outer query, and then re-used those plans for the duration
of the outer query, and then forgot everything. This was not ideal,
not least because the plans could not be customized to specific values
of the function's parameters. Our plancache infrastructure seems
mature enough to be used here. That will solve both the problem with
not being able to build custom plans and the problem with not being
able to share work across successive outer queries.
Aside from those performance concerns, this change fixes a
longstanding bugaboo with SQL functions: you could not write DDL that
would affect later statements in the same function. That's mostly
still true with new-style SQL functions, since the results of parse
analysis are baked into the stored query trees (and protected by
dependency records). But for old-style SQL functions, it will now
work much as it does with PL/pgSQL functions, because we delay parse
analysis and planning of each query until we're ready to run it.
Some edge cases that require replanning are now handled better too;
see for example the new rowsecurity test, where we now detect an RLS
context change that was previously missed.
One other edge-case change that might be worthy of a release note
is that we now insist that a SQL function's result be generated
by the physically-last query within it. Previously, if the last
original query was deleted by a DO INSTEAD NOTHING rule, we'd be
willing to take the result from the preceding query instead.
This behavior was undocumented except in source-code comments,
and it seems hard to believe that anyone's relying on it.
Along the way to this feature, we needed a few infrastructure changes:
* The plancache can now take either a raw parse tree or an
analyzed-but-not-rewritten Query as the starting point for a
CachedPlanSource. If given a Query, it is caller's responsibility
that nothing will happen to invalidate that form of the query.
We use this for new-style SQL functions, where what's in pg_proc is
serialized Query(s) and we trust the dependency mechanism to disallow
DDL that would break those.
* The plancache now offers a way to invoke a post-rewrite callback
to examine/modify the rewritten parse tree when it is rebuilding
the parse trees after a cache invalidation. We need this because
SQL functions sometimes adjust the parse tree to make its output
exactly match the declared result type; if the plan gets rebuilt,
that has to be re-done.
* There is a new backend module utils/cache/funccache.c that
abstracts the idea of caching data about a specific function
usage (a particular function and set of input data types).
The code in it is moved almost verbatim from PL/pgSQL, which
has done that for a long time. We use that logic now for
SQL-language functions too, and maybe other PLs will have use
for it in the future.
Author: Alexander Pyhalov <a.pyhalov@postgrespro.ru>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://postgr.es/m/8216639.NyiUUSuA9g@aivenlaptop
Without this, an additional change to the same pg_attribute row
within the same command will fail. This is possible at least with
ALTER TABLE ADD COLUMN on a multiple-inheritance-pathway structure.
(Another potential hazard is that immediately-following operations
might not see the missingval.)
Introduced by 95f650674, which split the former coding that
used a single pg_attribute update to change both atthasdef and
atthasmissing/attmissingval into two updates, but missed that
this should entail two CommandCounterIncrements as well. Like
that fix, back-patch through v13.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: Tender Wang <tndrwang@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/025a3ffa-5eff-4a88-97fb-8f583b015965@gmail.com
Backpatch-through: 13
Currently, the cancel request key is a 32-bit token, which isn't very
much entropy. If you want to cancel another session's query, you can
brute-force it. In most environments, an unauthorized cancellation of
a query isn't very serious, but it nevertheless would be nice to have
more protection from it. Hence make the key longer, to make it harder
to guess.
The longer cancellation keys are generated when using the new protocol
version 3.2. For connections using version 3.0, short 4-bytes keys are
still used.
The new longer key length is not hardcoded in the protocol anymore,
the client is expected to deal with variable length keys, up to 256
bytes. This flexibility allows e.g. a connection pooler to add more
information to the cancel key, which might be useful for finding the
connection.
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Discussion: https://www.postgresql.org/message-id/508d0505-8b7a-4864-a681-e7e5edfe32aa@iki.fi
All supported version of the PostgreSQL server send the
NegotiateProtocolVersion message when an unsupported minor protocol
version is requested by a client. But many other applications that
implement the PostgreSQL protocol (connection poolers, or other
databases) do not, and the same is true for PostgreSQL server versions
older than 9.3. Connecting to such other applications thus fails if a
client requests a protocol version different than 3.0.
This patch adds a max_protocol_version connection option to libpq that
specifies the protocol version that libpq should request from the
server. Currently only 3.0 is supported, but that will change in a
future commit that bumps the protocol version. Even after that version
bump the default will likely stay 3.0 for the time being. Once more of
the ecosystem supports the NegotiateProtocolVersion message we might
want to change the default to the latest minor version.
This also adds the similar min_protocol_version connection option, to
allow the client to specify that connecting should fail if a lower
protocol version is attempted by the server. This can be used to
ensure that certain protocol features are used, which can be
particularly useful if those features impact security.
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Discussion: https://www.postgresql.org/message-id/CAGECzQTfc_O%2BHXqAo5_-xG4r3EFVsTefUeQzSvhEyyLDba-O9w@mail.gmail.com
Discussion: https://www.postgresql.org/message-id/CAGECzQRbAGqJnnJJxTdKewTsNOovUt4bsx3NFfofz3m2j-t7tA@mail.gmail.com
The test added in 93bc3d75d8 failed in a build with RELCACHE_FORCE_RELEASE
and CATCACHE_FORCE_RELEASE defined. The test intentionally forgets to exit
batchmode - normally that would trigger an error at the end of the
transaction, which the test verifies. However, with RELCACHE_FORCE_RELEASE
and CATCACHE_FORCE_RELEASE defined, we get other code (output function lookup)
entering batchmode and erroring out because batchmode isn't allowed to be
entered recursively.
Fix that by changing the queries in question to not output any rows. That's
not exactly pretty, but seems to avoid the problem reliably.
Eventually we might want to make RELCACHE_FORCE_RELEASE and
CATCACHE_FORCE_RELEASE GUCs, so we can disable them where necessary - this
isn't the first test having difficulty with those debug options. But that's
for later.
Per buildfarm member prion.
Discussion: https://postgr.es/m/uc62i6vi5gd4bi6wtjj5poadqxolgy55e7ihkmf3mthjegb6zl@zqo7xez7sc2r
The test added in 93bc3d75d8 sometimes fails on windows, due to warnings like
WARNING: some useless files may be left behind in old database directory "base/16514"
The reason for that is createdb_failure_callback() does not ensure that there
are no open file descriptors for files in the partially created,
to-be-dropped, database. We do take care in dropdb(), but that involves
waiting for checkpoints and a ProcSignalBarrier, which we probably don't want
to do in an error callback. This should probably be fixed one day, but for
now 001_aio.pl needs to cope.
Per buildfarm animals fairywren and drongo.
Discussion: https://postgr.es/m/uc62i6vi5gd4bi6wtjj5poadqxolgy55e7ihkmf3mthjegb6zl@zqo7xez7sc2r
This expands the NOT ENFORCED constraint flag, previously only
supported for CHECK constraints (commit ca87c415e2), to foreign key
constraints.
Normally, when a foreign key constraint is created on a table, action
and check triggers are added to maintain data integrity. With this
patch, if a constraint is marked as NOT ENFORCED, integrity checks are
no longer required, making these triggers unnecessary. Consequently,
when creating a NOT ENFORCED foreign key constraint, triggers will not
be created, and the constraint will be marked as NOT VALID.
Similarly, if an existing foreign key constraint is changed to NOT
ENFORCED, the associated triggers will be dropped, and the constraint
will also be marked as NOT VALID. Conversely, if a NOT ENFORCED
foreign key constraint is changed to ENFORCED, the necessary triggers
will be created, and the will be changed to VALID by performing
necessary validation.
Since not-enforced foreign key constraints have no triggers, the
shortcut used for example in psql and pg_dump to skip looking for
foreign keys if the relation is known not to have triggers no longer
applies. (It already didn't work for partitioned tables.)
Author: Amul Sul <sulamul@gmail.com>
Reviewed-by: Joel Jacobson <joel@compiler.org>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Isaac Morland <isaac.morland@gmail.com>
Reviewed-by: Alexandra Wang <alexandra.wang.oss@gmail.com>
Tested-by: Triveni N <triveni.n@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/CAAJ_b962c5AcYW9KUt_R_ER5qs3fUGbe4az-SP-vuwPS-w-AGA@mail.gmail.com
If io_method is set in TEMP_CONFIG the test added in 93bc3d75d8 fails,
because it assumes the io_method specified at initdb is actually used.
Fix that by appending the io_method again, after initdb (and thus after
TEMP_CONFIG has been added by Cluster.pm).
Per buildfarm animal bumblebee
Discussion: https://postgr.es/m/zh5u22wbpcyfw2ddl3lsvmsxf4yvsrvgxqwwmfjddc4c2khsgp@gfysyjsaelr5
Add a test to pg_upgrade's test suite that verifies that
dump-restore-dump of regression database produces equivalent output to
dumping it directly. This was already being tested by running
pg_upgrade itself, but non-binary-upgrade mode was not being covered.
The regression database has accrued, over time, a sufficient collection
of interesting objects to ensure good coverage, but there hasn't been a
concerted effort to be completely exhaustive, so it is likely still
possible to have more.
This'd belong more naturally in the pg_dump test suite, but we chose to
put it in src/bin/pg_upgrade/t/002_pg_upgrade.pl because we need a run
of the regression tests which is already done here, so this has less
total test runtime impact. Also, experiments have shown that using
parallel dump/restore is slightly faster, so we use --format=directory -j2.
This test has already reported pg_dump bugs, as fixed in fd41ba93e4,
74563f6b90, d611f8b158, 4694aedf63.
Author: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/CAExHW5uF5V=Cjecx3_Z=7xfh4rg2Wf61PT+hfquzjBqouRzQJQ@mail.gmail.com
95d6e9af0 added code to display the tuplestore storage type for
WindowAgg nodes and added a test to ensure the "Disk" storage method was
working correctly by setting work_mem to 64 and running a test which
caused the WindowAgg to go to disk. Seemingly, the number of rows
chosen there wasn't quite enough for that to happen in x86 32-bit.
Fix this by increasing the number of rows slightly.
I suspect the buildfarm didn't catch this as MEMORY_CONTEXT_CHECKING
builds will use a bit more memory for MemoryChunks to store the
requested_size and also because of the additional space to store the
chunk's sentinel byte.
Reported-by: Christoph Berg <myon@debian.org>
Discussion: https://postgr.es/m/Z-q3ZAM4OhE-4UiI@msg.df7cb.de
ExecInitPartitionInfo() duplicates much of the logic in
ExecInitMerge(), except that it failed to handle DO NOTHING
actions. This would cause an "unknown action in MERGE WHEN clause"
error if a MERGE with any DO NOTHING actions attempted to insert into
a partition not already initialised by ExecInitModifyTable().
Bug: #18871
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: Tender Wang <tndrwang@gmail.com>
Reviewed-by: Gurjeet Singh <gurjeet@singh.im>
Discussion: https://postgr.es/m/18871-b44e3c96de3bd2e8%40postgresql.org
Backpatch-through: 15
Currently, group_similar_or_args() permutes original positions of clauses
independently on whether it manages to find any groups of similar clauses.
While we are not providing any strict warranties on saving the original order
of OR-clauses, it is preferred that the original order be modified as little
as possible.
This commit changes the reordering algorithm of group_similar_or_args() in
the following way. We reorder each group of similar clauses so that the
first item of the group stays in place, but all the other items are moved
after it. So, if there are no similar clauses, the order of clauses stays
the same. When there are some groups, only required reordering happens while
the rest of the clauses remain in their places.
Reported-by: Andrei Lepikhov <lepihov@gmail.com>
Discussion: https://postgr.es/m/3ac7c436-81e1-4191-9caf-b0dd70b51511%40gmail.com
Reviewed-by: Pavel Borisov <pashkin.elfe@gmail.com>
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Alena Rybakina <a.rybakina@postgrespro.ru>
The uuidv7_interval() function previously converted a shifted
microsecond-precision timestamp (64-bit integer) to another 64-bit
integer representing a timestamp with nanosecond precision. This
conversion caused overflow for dates beyond the year 2262. The
millisecond and sub-millisecond parts were then extracted from this
nanosecond-precision timestamp and stored in UUIDv7 values.
With this commit, the millisecond and sub-millisecond parts are stored
directly into the UUIDv7 value without being converted back to a
nanosecond precision timestamp. Following RFC 9562, the timestamp is
stored as an unsigned integer, enabling support for dates up to the
year 10889.
Reported and fixed by Andrey Borodin, with cosmetic changes and
regression tests by me.
Reported-by: Andrey Borodin <x4mmm@yandex-team.ru>
Author: Andrey Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/96DEC2D9-659A-40E8-B7BA-AF5D162A9E21@yandex-team.ru
The problem is that after the ALTER SUBSCRIPTION tap_sub SET PUBLICATION
command, we didn't wait for the new walsender to start on the publisher.
Immediately after ALTER, we performed Insert and expected it to replicate.
However, the replication could start from a point after the INSERT location,
and as the subscription isn't copying initial data, we could miss such an
Insert.
The fix is to wait for connection to be established between publisher and
subscriber before starting DML operations that are expected to replicate.
As per CI.
Reported-by: Andres Freund <andres@anarazel.de>
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Discussion: https://postgr.es/m/CALDaNm2ms1deM5EYNLFEfESv_Kw=Y4AiTB0LP=qGS-UpFwGbPg@mail.gmail.com
Commit d45597f72f introduced the ability to change a not-null
constraint from NO INHERIT to INHERIT and vice versa, but we included
the SET noise word in the syntax for it. The SET turns out not to be
necessary and goes against what the SQL standard says for other ALTER
TABLE subcommands, so remove it.
This changes the way this command is processed for constraint types
other than not-null, so there are some error message changes.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Suraj Kharage <suraj.kharage@enterprisedb.com>
Discussion: https://postgr.es/m/202503251602.vsxaehsyaoac@alvherre.pgsql
It seems potentially useful to label our shared libraries with version
information, now that a facility exists for retrieving that. This
patch labels them with the PG_VERSION string. There was some
discussion about using semantic versioning conventions, but that
doesn't seem terribly helpful for modules with no SQL-level presence;
and for those that do have SQL objects, we typically expect them
to support multiple revisions of the SQL definitions, so it'd still
not be very helpful.
I did not label any of src/test/modules/. It seems unnecessary since
we don't install those, and besides there ought to be someplace that
still provides test coverage for the original PG_MODULE_MAGIC macro.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/dd4d1b59-d0fe-49d5-b28f-1e463b68fa32@gmail.com
We need the -I switch for libpq_srcdir to come before any -I switches
injected by configure. Otherwise there is a risk of pulling in a
mismatched version of libpq_fe.h from someplace like
/usr/local/include, if the platform has another Postgres version
installed there. This evidently accounts for today's buildfarm
failures on "anaconda".
In principle the -I switch for src/port/ is at similar hazard, and has
been for a very long time. But the only .h files we keep there are
pg_config_paths.h and pthread-win32.h, neither of which get installed
on Unix-ish systems, so the odds of picking up a conflicting header
seem pretty small. That doubtless accounts for the lack of prior
reports.
Back-patch to v17 where pg_regress acquired a build dependency on
libpq_fe.h. We could go back further to fix the hazard for src/port/
in older branches, but it seems unlikely to be worth troubling over.
Reported-by: Nathan Bossart <nathandbossart@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/Z-MhRzoc7t-nPUQG@nathan
Backpatch-through: 17
This new option instructs pg_dump to dump sequence data when the
--no-data, --schema-only, or --statistics-only option is specified.
This was originally considered for commit a7e5457db8, but it was
left out at that time because there was no known use-case. A
follow-up commit will use this to optimize pg_upgrade's file
transfer step.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/Zyvop-LxLXBLrZil%40nathan
For import and export, use schemaname/relname rather than
regclass.
This is more natural during export, fits with the other arguments
better, and it gives better control over error handling in case we
need to downgrade more errors to warnings.
Also, use text for the argument types for schemaname, relname, and
attname so that casts to "name" are not required.
Author: Corey Huinker <corey.huinker@gmail.com>
Discussion: https://postgr.es/m/CADkLM=ceOSsx_=oe73QQ-BxUFR2Cwqum7-UP_fPe22DBY0NerA@mail.gmail.com
Previously we used pg_int64 in three function prototypes in libpq. It
was added by commit 461ef73f to expose the platform-dependent type used
for int64 in the C89 era. As of commit 962da900 it is defined as
standard int64_t, and the dust seems to have settled.
Let's just use int64_t directly in these three client-facing functions
instead of (yet) another name. We've required C99 and thus <stdint.h>
since PostgreSQL 12, C89 and C++98 compilers are long gone, and client
applications very likely use standard types for their own 64-bit needs.
This also cleans up the obscure placement of a new #include <stdint.h>
directive in postgres_ext.h, required for the new definition. The
typedef was hiding in there for historical reasons, but it doesn't fit
postgres_ext.h's own description of its purpose and there is no evidence
of client applications including postgres_ext.h directly to see it.
Keep a typedef marked deprecated for backward compatibility, but move it
into libpq-fe.h where it was used.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CA%2BhUKGKn_EkNNGMY5RzMcKP%2Ba6urT4JF%3DCPhw_zHtQwjvX6P2g%40mail.gmail.com
The bitmap heap scan skip fetch optimization skips fetching the heap
block when a page is set all-visible in the visibility map and no
columns from the table are needed to satisfy the query.
2b73a8cd33 and c3953226a0 changed the control flow of bitmap heap scan
to use the read stream API. The read stream API returns buffers
containing blocks to the user. To make this work with the skip fetch
optimization, we keep a count of the empty tuples we need to emit for
all the blocks skipped and only emit the empty tuples after processing
the next block fetched from the heap or at the end of the scan.
It's incorrect to recheck NULL tuples, so we must set `recheck` to false
before yielding control back to BitmapHeapNext(). This was done before
emitting any remaining empty tuples at the end of the scan but not for
empty tuples emitted during the scan. This meant that if a page fetched
from the heap did require recheck and set `recheck` to true and then we
emitted empty tuples for subsequent blocks, we would get wrong results.
Fix this by always setting `recheck` to false before emitting empty
tuples.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Tested-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/496f7acd-881c-4df3-9bd3-8f8534dfec26%40gmail.com
Introduce a new conflict type, multiple_unique_conflicts, to handle cases
where an incoming row during logical replication violates multiple UNIQUE
constraints.
Previously, the apply worker detected and reported only the first
encountered key conflict (insert_exists/update_exists), causing repeated
failures as each constraint violation needs to be handled one by one
making the process slow and error-prone.
With this patch, the apply worker checks all unique constraints upfront
once the first key conflict is detected and reports
multiple_unique_conflicts if multiple violations exist. This allows users
to resolve all conflicts at once by deleting all conflicting tuples rather
than dealing with them individually or skipping the transaction.
In the future, this will also allow us to specify different resolution
handlers for such a conflict type.
Add the stats for this conflict type in pg_stat_subscription_stats.
Author: Nisha Moond <nisha.moond412@gmail.com>
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Discussion: https://postgr.es/m/CABdArM7FW-_dnthGkg2s0fy1HhUB8C3ELA0gZX1kkbs1ZZoV3Q@mail.gmail.com
This new test checks all of pg_upgrade's file transfer modes. For
each mode, we verify that pg_upgrade either succeeds (and some test
objects successfully reach the new version) or fails with an error
that indicates the mode is not supported on the current platform.
For cross-version tests, we also check that pg_upgrade transfers
non-default tablespaces. (Tablespaces can't be tested on same
version upgrades because of the version-specific subdirectory
conflict, but we might be able to enable such tests once we teach
pg_upgrade how to handle in-place tablespaces.)
Suggested-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/Zyvop-LxLXBLrZil%40nathan
This new parameter works just like the storage parameter of the
same name: if set to true (which is the default), autovacuum and
VACUUM attempt to truncate any empty pages at the end of the table.
It is primarily intended to help users avoid locking issues on hot
standbys. The setting can be overridden with the storage parameter
or VACUUM's TRUNCATE option.
Since there's presently no way to determine whether a Boolean
storage parameter is explicitly set or has just picked up the
default value, this commit also introduces an isset_offset member
to relopt_parse_elt.
Suggested-by: Will Storey <will@summercat.com>
Author: Nathan Bossart <nathandbossart@gmail.com>
Co-authored-by: Gurjeet Singh <gurjeet@singh.im>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Robert Treat <rob@xzilla.net>
Discussion: https://postgr.es/m/Z2DE4lDX4tHqNGZt%40dev.null
The new GUC extension_control_path specifies a path to look for
extension control files. The default value is $system, which looks in
the compiled-in location, as before.
The path search uses the same code and works in the same way as
dynamic_library_path.
Some use cases of this are: (1) testing extensions during package
builds, (2) installing extensions outside security-restricted
containers like Python.app (on macOS), (3) adding extensions to
PostgreSQL running in a Kubernetes environment using operators such as
CloudNativePG without having to rebuild the base image for each new
extension.
There is also a tweak in Makefile.global so that it is possible to
install extensions using PGXS into an different directory than the
default, using 'make install prefix=/else/where'. This previously
only worked when specifying the subdirectories, like 'make install
datadir=/else/where/share pkglibdir=/else/where/lib', for purely
implementation reasons. (Of course, without the path feature,
installing elsewhere was rarely useful.)
Author: Peter Eisentraut <peter@eisentraut.org>
Co-authored-by: Matheus Alcantara <matheusssilv97@gmail.com>
Reviewed-by: David E. Wheeler <david@justatheory.com>
Reviewed-by: Gabriele Bartolini <gabriele.bartolini@enterprisedb.com>
Reviewed-by: Marco Nenciarini <marco.nenciarini@enterprisedb.com>
Reviewed-by: Niccolò Fei <niccolo.fei@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/E7C7BFFB-8857-48D4-A71F-88B359FADCFD@justatheory.com
Currently, the only way to pipe queries in an ongoing pipeline (in a
\startpipeline block) is to leverage the meta-commands able to create
extended queries such as \bind, \parse or \bind_named.
While this is good enough for testing the backend with pipelines, it has
been mentioned that it can also be very useful to allow queries
terminated by semicolons to be appended to a pipeline. For example, it
would be possible to migrate existing psql scripts to use pipelines by
just adding a set of \startpipeline and \endpipeline meta-commands,
making such scripts more efficient.
Doing such a change is proving to be simple in psql: queries terminated
by semicolons can be executed through PQsendQueryParams() without any
parameters set when the pipeline mode is active, instead of
PQsendQuery(), the default, like pgbench. \watch is still forbidden
while in a pipeline, as it expects its results to be processed
synchronously.
The large portion of this commit consists in providing more test
coverage, with mixes of extended queries appended in a pipeline by \bind
and friends, and queries terminated by semicolons.
This improvement has been suggested by Daniel Vérité.
Author: Anthonin Bonnefoy <anthonin.bonnefoy@datadoghq.com>
Discussion: https://postgr.es/m/d67b9c19-d009-4a50-8020-1a0ea92366a1@manitou-mail.org
