transaction rollback via UNDO but I think that's highly unlikely to
happen, so we may as well remove the stubs. (Someday we ought to
rip out the stub xxx_undo routines, too.) Per Alvaro.
access: define new index access method functions 'amgetmulti' that can
fetch multiple TIDs per call. (The functions exist but are totally
untested as yet.) Since I was modifying pg_am anyway, remove the
no-longer-needed 'rel' parameter from amcostestimate functions, and
also remove the vestigial amowner column that was creating useless
work for Alvaro's shared-object-dependencies project.
Initdb forced due to changes in pg_am.
currently does. This is now the default Win32 wal sync method because
we perfer o_datasync to fsync.
Also, change Win32 fsync to a new wal sync method called
fsync_writethrough because that is the behavior of _commit, which is
what is used for fsync on Win32.
Backpatch to 8.0.X.
PageIndexTupleDelete() with a single pass of compactification ---
logic mostly lifted from PageRepairFragmentation. I noticed while
profiling that a VACUUM that's cleaning up a whole lot of deleted
tuples would spend as much as a third of its CPU time in
PageIndexTupleDelete; not too surprising considering the loop method
was roughly O(N^2) in the number of tuples involved.
convention for isnull flags. Also, remove the useless InsertIndexResult
return struct from index AM aminsert calls --- there is no reason for
the caller to know where in the index the tuple was inserted, and we
were wasting a palloc cycle per insert to deliver this uninteresting
value (plus nontrivial complexity in some AMs).
I forced initdb because of the change in the signature of the aminsert
routines, even though nothing really looks at those pg_proc entries...
to write out data that we are about to tell the filesystem to drop.
smgr_internal_unlink already had a DropRelFileNodeBuffers call to
get rid of dead buffers without a write after it's no longer possible
to roll back the deleting transaction. Adding a similar call in
smgrtruncate simplifies callers and makes the overall division of
labor clearer. This patch removes the former behavior that VACUUM
would write all dirty buffers of a relation unconditionally.
of tuples when passing data up through multiple plan nodes. A slot can now
hold either a normal "physical" HeapTuple, or a "virtual" tuple consisting
of Datum/isnull arrays. Upper plan levels can usually just copy the Datum
arrays, avoiding heap_formtuple() and possible subsequent nocachegetattr()
calls to extract the data again. This work extends Atsushi Ogawa's earlier
patch, which provided the key idea of adding Datum arrays to TupleTableSlots.
(I believe however that something like this was foreseen way back in Berkeley
days --- see the old comment on ExecProject.) A test case involving many
levels of join of fairly wide tables (about 80 columns altogether) showed
about 3x overall speedup, though simple queries will probably not be
helped very much.
I have also duplicated some code in heaptuple.c in order to provide versions
of heap_formtuple and friends that use "bool" arrays to indicate null
attributes, instead of the old convention of "char" arrays containing either
'n' or ' '. This provides a better match to the convention used by
ExecEvalExpr. While I have not made a concerted effort to get rid of uses
of the old routines, I think they should be deprecated and eventually removed.
a tuple are being accessed via ExecEvalVar and the attcacheoff shortcut
isn't usable (due to nulls and/or varlena columns). To do this, cache
Datums extracted from a tuple in the associated TupleTableSlot.
Also some code cleanup in and around the TupleTable handling.
Atsushi Ogawa with some kibitzing by Tom Lane.
number of palloc calls. This has a salutory impact on plpgsql operations
with record variables (which create and destroy tupdescs constantly)
and probably helps a bit in some other cases too.
the AMI_OVERRIDE flag. The fact that TransactionLogFetch treats
BootstrapTransactionId as always committed is sufficient to make
bootstrap work, and getting rid of extra tests in heavily used code
paths seems like a win. The files produced by initdb are demonstrably
the same after this change.
in GetNewTransactionId(). Since the limit value has to be computed
before we run any real transactions, this requires adding code to database
startup to scan pg_database and determine the oldest datfrozenxid.
This can conveniently be combined with the first stage of an attack on
the problem that the 'flat file' copies of pg_shadow and pg_group are
not properly updated during WAL recovery. The code I've added to
startup resides in a new file src/backend/utils/init/flatfiles.c, and
it is responsible for rewriting the flat files as well as initializing
the XID wraparound limit value. This will eventually allow us to get
rid of GetRawDatabaseInfo too, but we'll need an initdb so we can add
a trigger to pg_database.
(1) Keep a pin on the scan's current buffer and mark buffer. This
avoids the need to do a ReadBuffer() for each tuple produced by the
scan. Since ReadBuffer() is expensive, this is a significant win.
(2) Convert a ReleaseBuffer(); ReadBuffer() pair into
ReleaseAndReadBuffer(). Surely not a huge win, but it saves a lock
acquire/release...
(3) Remove a bunch of duplicated code in rtget.c; make rtnext() handle
both the "initial result" and "subsequent result" cases.
(4) Add support for index tuple killing
(5) Remove rtscancache(): it is dead code, for the same reason that
gistscancache() is dead code (an index scan ought not be invoked with
NoMovementScanDirection).
The end result is about a 10% improvement in rtree index scan perf,
according to contrib/rtree_gist/bench.
is the minimum required fix. I want to look next at taking advantage of
it by simplifying the message semantics in the shared inval message queue,
but that part can be held over for 8.1 if it turns out too ugly.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
the remainder of the current clog page during system startup. While
this was a good idea, it turns out the code fails if nextXid is
exactly at a page boundary, because we won't have created the "current"
clog page yet in that case. Since the page will be correctly zeroed
when we execute the first transaction on it, the solution is just to
do nothing when exactly at a page boundary. Per trouble report from
Dave Hartwig.
a relation's number of blocks, rather than the possibly-obsolete value
in pg_class.relpages. Scale the value in pg_class.reltuples correspondingly
to arrive at a hopefully more accurate number of rows. When pg_class
contains 0/0, estimate a tuple width from the column datatypes and divide
that into current file size to estimate number of rows. This improved
methodology allows us to jettison the ancient hacks that put bogus default
values into pg_class when a table is first created. Also, per a suggestion
from Simon, make VACUUM (but not VACUUM FULL or ANALYZE) adjust the value
it puts into pg_class.reltuples to try to represent the mean tuple density
instead of the minimal density that actually prevails just after VACUUM.
These changes alter the plans selected for certain regression tests, so
update the expected files accordingly. (I removed join_1.out because
it's not clear if it still applies; we can add back any variant versions
as they are shown to be needed.)
Rather than using ReadBuffer() to increment the reference count on an
already-pinned buffer, we should use IncrBufferRefCount() as it is
faster and does not require acquiring the BufMgrLock.
buffer is valid, as ReadBuffer() will elog on error. Most of the call
sites of ReadBuffer() got this right, but this patch fixes those call
sites that did not.
'recycled log files' and 'removed log files' messages from DEBUG1 to
DEBUG2, replacing them with a count of files added/removed/recycled in
the checkpoint end message, as per suggestion from Simon Riggs.
in all cases when keep_buf = true. This allows ANALYZE's inner loop to
use heap_release_fetch, which saves multiple buffer lookups for the same
page and avoids overestimation of cost by the vacuum cost mechanism.
to make life cushy for the JDBC driver. Centralize the decision-making
that affects this by inventing a get_type_func_class() function, rather
than adding special cases in half a dozen places.
pins at end of transaction, and reduce AtEOXact_Buffers to an Assert
cross-check that this was done correctly. When not USE_ASSERT_CHECKING,
AtEOXact_Buffers is a complete no-op. This gets rid of an O(NBuffers)
bottleneck during transaction commit/abort, which recent testing has shown
becomes significant above a few tens of thousands of shared buffers.
http://archives.postgresql.org/pgsql-hackers/2004-10/msg00464.php.
This fix is intended to be permanent: it moves the responsibility for
calling SetBufferCommitInfoNeedsSave() into the tqual.c routines,
eliminating the requirement for callers to test whether t_infomask changed.
Also, tighten validity checking on buffer IDs in bufmgr.c --- several
routines were paranoid about out-of-range shared buffer numbers but not
about out-of-range local ones, which seems a tad pointless.
running contains VACUUM or a similar command that will internally start
and commit transactions. In such a case, the original caller values of
CurrentMemoryContext and CurrentResourceOwner will point to objects that
will be destroyed by the internal commit. We must restore these pointers
to point to the newly-manufactured transaction context and resource owner,
rather than possibly pointing to deleted memory.
Also tweak xact.c so that AbortTransaction and AbortSubTransaction
forcibly restore a sane value for CurrentResourceOwner, much as they
have always done for CurrentMemoryContext. I'm not certain this is
necessary but I'm feeling paranoid today.
Responds to Sean Chittenden's bug report of 4-Oct.
to unreserved keyword, use ereport not elog, assign a separate error code
for 'could not obtain lock' so that applications will be able to detect
that case cleanly.
now are supposed to take some kind of lock on an index whenever you
are going to access the index contents, rather than relying only on a
lock on the parent table.
creating a new tuple. This is just for debugging sanity, though, since
nothing should be paying any attention to xmax when the HEAP_XMAX_INVALID
bit is set.
pg_subtrans --- what we need is the oldest xmin of any snapshot in use
in the current top transaction. Introduce a new variable TransactionXmin
to play this role. Fixes intermittent regression failure reported by
Neil Conway.
as per recent discussions. Invent SubTransactionIds that are managed like
CommandIds (ie, counter is reset at start of each top transaction), and
use these instead of TransactionIds to keep track of subtransaction status
in those modules that need it. This means that a subtransaction does not
need an XID unless it actually inserts/modifies rows in the database.
Accordingly, don't assign it an XID nor take a lock on the XID until it
tries to do that. This saves a lot of overhead for subtransactions that
are only used for error recovery (eg plpgsql exceptions). Also, arrange
to release a subtransaction's XID lock as soon as the subtransaction
exits, in both the commit and abort cases. This avoids holding many
unique locks after a long series of subtransactions. The price is some
additional overhead in XactLockTableWait, but that seems acceptable.
Finally, restructure the state machine in xact.c to have a more orthogonal
set of states for subtransactions.
