Now doesn't report it is waiting until it actually is waiting,
plus message doesn't appear until at least 5 seconds wait, so
we avoid reporting the wait before we've given the archiver
a reasonable time to wake up and archive the file we just
created earlier in the function.
Also add new unconditional message to confirm safe completion.
Now a normal, healthy execution does not report waiting at
all, just safe completion.
through normal backends. Makes code clearer also, since we
avoid various Assert()s. Performance of snapshots taken
during recovery no longer depends upon number of read-only
backends.
after actually removing one, so that if we can't remove segments because
WAL archiving is lagging behind, we don't unnecessarily forbid streaming
the old not-yet-archived segments that are still perfectly valid. Per
suggestion from Fujii Masao.
doesn't take into account how far the WAL senders are. This way a hung
WAL sender doesn't prevent old WAL segments from being recycled/removed
in the primary, ultimately causing the disk to fill up. Instead add
standby_keep_segments setting to control how many old WAL segments are
kept in the primary. This also makes it more reliable to use streaming
replication without WAL archiving, assuming that you set
standby_keep_segments high enough.
recovery. We might want to relax this in the future, but ThisTimeLineID
isn't currently correct in backends during recovery, so the filename
returned was wrong.
This allows us to see what mode the server is in before it starts to
perform actions that can block or hang. Otherwise server messages
may not appear until after messages that say FATAL the database
server is starting up.
The error message now makes explicit reference to the GUC that must be changed
to fix the problem, using wording suggested by Tom Lane. Along the way,
rename the GUC from MaxWalSenders to max_wal_senders for consistency and
grep-ability.
pg_xlog directory. This is essential for replaying WAL records that
were streamed from the master, after a standby server restart.
If a corrupt record is seen in a file restored from the archive or
streamed from the master, log it as a WARNING and keep retrying. If the
corruption is permanent, and not just a glitch in the whatever copies the
files to the archive or a network error not caught by CRC checks in TCP
for example, we will keep retrying and logging the WARNING indefinitely.
But that's better than shutting down completely, the standby is still
useful for running read-only queries. In PITR the recovery ends at such a
corrupt record, which is a bit questionable, but that's the behavior we
had in previous releases and we don't feel like chaning it now. It does
make sense for tools like pg_standby.
example to 'on or 'off' rather than 'true' or 'false', as shown
in docs. Add restartpoint_command. Add section header for recovery
target parameters, matching docs.
WAL record for btree delete contains a list of tids, even when backup
blocks are present. We follow the tids to their heap tuples, taking
care to follow LP_REDIRECT tuples. We ignore LP_DEAD tuples on the
understanding that they will always have xmin/xmax earlier than any
LP_NORMAL tuples referred to by killed index tuples. Iff all tuples
are LP_DEAD we return InvalidTransactionId. The heap relfilenode is
added to the WAL record, requiring API changes to pass down the heap
Relation. XLOG_PAGE_MAGIC updated.
present since 8.0 was never fully meaningful, since two recovery targets
cannot be specified. Refactor recovery target type to make this change
and associated code easier to understand. No change in function.
Bug report arising from internal support question.
field into WAL record and reset it from there, rather than using
FrozenTransactionId which can lead to some corner case bugs.
Problem report and suggested route to a fix from Heikki, details by me.
in recovery_end_command, it always came out as 0 because InRedo was
cleared before recovery_end_command was executed. Also, always take
ControlFileLock when reading checkpoint location for %r.
The recovery_end_command bug and the missing locking was present in 8.4
as well, that part of this patch will be backported separately.
instead of an exclusive lock.
The change is almost for code cleanup. Since there seems to be no
performance benefits from it, backports should not be needed.
Fujii Masao
Add some checks that seem logically necessary, in particular let's make
real sure that HS slave sessions cannot create temp tables. (If they did
they would think that temp tables belonging to the master's session with
the same BackendId were theirs. We *must* not allow myTempNamespace to
become set in a slave session.)
Change setval() and nextval() so that they are only allowed on temp sequences
in a read-only transaction. This seems consistent with what we allow for
table modifications in read-only transactions. Since an HS slave can't have a
temp sequence, this also provides a nicer cure for the setval PANIC reported
by Erik Rijkers.
Make the error messages more uniform, and have them mention the specific
command being complained of. This seems worth the trifling amount of extra
code, since people are likely to see such messages a lot more than before.
enabled. Bypassing the kernel cache is counter-productive in that case,
because the archiver/walsender process will read from the WAL file
soon after it's written, and if it's not cached the read will cause
a physical read, eating I/O bandwidth available on the WAL drive.
Also, walreceiver process does unaligned writes, so disable O_DIRECT
in walreceiver process for that reason too.
segment of XLOG_BACKUP_END record even if the the record is placed
at a segment boundary. Furthermore the previous implementation could
return nonexistent segment file name when the boundary is in segments
that has "FE" suffix; We never use segments with "FF" suffix.
Backpatch to 8.0, where hot backup was introduced.
Reported by Fujii Masao.
all the values derived from oldestXid, not just that field. Brain fade in
one of my patches associated with flat file removal, exposed by a report
from Fujii Masao.
With this change, xidVacLimit should always be valid, so remove a couple of
bits of complexity associated with the previous assumption that sometimes
it wouldn't get set right away.
In addition, add support for a "payload" string to be passed along with
each notify event.
This implementation should be significantly more efficient than the old one,
and is also more compatible with Hot Standby usage. There is not yet any
facility for HS slaves to receive notifications generated on the master,
although such a thing is possible in future.
Joachim Wieland, reviewed by Jeff Davis; also hacked on by me.
The purpose of this change is to eliminate the need for every caller
of SearchSysCache, SearchSysCacheCopy, SearchSysCacheExists,
GetSysCacheOid, and SearchSysCacheList to know the maximum number
of allowable keys for a syscache entry (currently 4). This will
make it far easier to increase the maximum number of keys in a
future release should we choose to do so, and it makes the code
shorter, too.
Design and review by Tom Lane.
where a database has a non-default tablespaceid. Pass thru MyDatabaseId
and MyDatabaseTableSpace to allow file path to be re-created in
standby and correct invalidation to take place in all cases.
Update and rework xact_commit_desc() debug messages.
Bug report from Tom by code inspection. Fix by me.
echo all the recovery.conf options. Don't emit the "initializing
recovery connections" message, which doesn't mean anything to a user.
Remove the "starting archive recovery" message and replace the
"automatic recovery in progress" message with a more informative message
saying whether the server is doing PITR, normal archive recovery, or
standby mode.
a partial WAL file, assume it's because the file is just being copied to
the archive and treat it the same as "file not found" in standby mode.
pg_standby has a similar check, so it seems reasonable to have the same
level of protection in the built-in standby mode.
several places, but for now only GIN uses it during index creation.
Using self-balanced tree greatly speeds up index creation in corner cases
with preordered data.
restoring from archive, the last WAL segment is not necessarily open at
the end of recovery. Fix assertion that assumed that.
Fujii Masao, fixing the assertion failure reported by Martin Pihlak.
Move rd_targblock, rd_fsm_nblocks, and rd_vm_nblocks from relcache to the smgr
relation entries, so that they will get reset to InvalidBlockNumber whenever
an smgr-level flush happens. Because we now send smgr invalidation messages
immediately (not at end of transaction) when a relation truncation occurs,
this ensures that other backends will reset their values before they next
access the relation. We no longer need the unreliable assumption that a
VACUUM that's doing a truncation will hold its AccessExclusive lock until
commit --- in fact, we can intentionally release that lock as soon as we've
completed the truncation. This patch therefore reverts (most of) Alvaro's
patch of 2009-11-10, as well as my marginal hacking on it yesterday. We can
also get rid of assorted no-longer-needed relcache flushes, which are far more
expensive than an smgr flush because they kill a lot more state.
In passing this patch fixes smgr_redo's failure to perform visibility-map
truncation, and cleans up some rather dubious assumptions in freespace.c and
visibilitymap.c about when rd_fsm_nblocks and rd_vm_nblocks can be out of
date.
recovery. It's zeroed out whenever a checkpoint is written, so the only
scenario where the removed code did anything is when you kill archive
recovery, remove recovery.conf, and start up the server, so that it goes
into crash recovery instead. That's a "don't do that" scenario, but it
seems better to not clear minRecoveryPoint but instead update it like we
do in archive recovery, which is what will now happen.
