clauses even if it's an outer join. This is a corner case since such
clauses could only arise from weird OUTER JOIN ON conditions, but worth
fixing. Per example from Ron at cheapcomplexdevices.com.
#2075: consider an index redundant if any of its index conditions were already
used, rather than if all of them were. Also, make the selectivity comparison
a bit fuzzy, so that very small differences in estimated selectivities don't
skew the results.
qualification when the underlying operator is indexable and useOr is true.
That is, indexkey op ANY (ARRAY[...]) is effectively translated into an
OR combination of one indexscan for each array element. This only works
for bitmap index scans, of course, since regular indexscans no longer
support OR'ing of scans. There are still some loose ends to clean up
before changing 'x IN (list)' to translate as a ScalarArrayOpExpr;
for instance predtest.c ought to be taught about it. But this gets the
basic functionality in place.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
sense and rename to "outerjoin_delayed" to more clearly reflect what it
means). I had decided that it was redundant in 8.1, but the folly of this
is exposed by a bug report from Sebastian Böck. The place where it's
needed is to prevent orindxpath.c from cherry-picking arms of an outer-join
OR clause to form a relation restriction that isn't actually legal to push
down to the relation scan level. There may be some legal cases that this
forbids optimizing, but we'd need much closer analysis to determine it.
"optimization". When we find a potentially useful joinclause, we
have to add all its other required_relids to the result, not only the
other clause_relids. They are different in the case of a joinclause
whose applicability has to be postponed due to outer join. We have
to include the extra rels because otherwise, after best_inner_indexscan
masks the join rels with index_outer_relids, it will always fail to
find the joinclause as applicable. Per report from Husam Tomeh.
planning logic for bitmap indexscans. Partial indexes create corner
cases in which a scan might be done with no explicit index qual conditions,
and the code wasn't handling those cases nicely. Also be a little
tenser about eliminating redundant clauses in the generated plan.
Per report from Dmitry Karasik.
propagated inside an outer join. In particular, given
LEFT JOIN ON (A = B) WHERE A = constant, we cannot conclude that
B = constant at the top level (B might be null instead), but we
can nonetheless put a restriction B = constant into the quals for
B's relation, since no inner-side rows not meeting that condition
can contribute to the final result. Similarly, given
FULL JOIN USING (J) WHERE J = constant, we can't directly conclude
that either input J variable = constant, but it's OK to push such
quals into each input rel. Per recent gripe from Kim Bisgaard.
Along the way, remove 'valid_everywhere' flag from RestrictInfo,
as on closer analysis it was not being used for anything, and was
defined backwards anyway.
constraint while determining whether the index sort order matches the
query's ORDER BY. This for example allows an index on (x,y) to match
... WHERE x = 42 ORDER BY y;
It only works for btree indexes, but since those are the only ones we
currently have that are ordered at all, that's good enough for now.
Per popular demand.
nonconsecutive columns of a multicolumn index, as per discussion around
mid-May (pghackers thread "Best way to scan on-disk bitmaps"). This
turns out to require only minimal changes in btree, and so far as I can
see none at all in GiST. btcostestimate did need some work, but its
original assumption that index selectivity == heap selectivity was
quite bogus even before this.
of a relation in a flat 'joininfo' list. The former arrangement grouped
the join clauses according to the set of unjoined relids used in each;
however, profiling on test cases involving lots of joins proves that
that data structure is a net loss. It takes more time to group the
join clauses together than is saved by avoiding duplicate tests later.
It doesn't help any that there are usually not more than one or two
clauses per group ...
a new PlannerInfo struct, which is passed around instead of the bare
Query in all the planning code. This commit is essentially just a
code-beautification exercise, but it does open the door to making
larger changes to the planner data structures without having to muck
with the widely-known Query struct.
which is neither needed by nor related to that header. Remove the bogus
inclusion and instead include the header in those C files that actually
need it. Also fix unnecessary inclusions and bad inclusion order in
tsearch2 files.
or bitmap), use pred_test to be a little smarter about cases where a
filter clause is logically unnecessary. This may be overkill for the
plain indexscan case, but it's definitely useful for OR'd bitmap scans.
node, as this behavior is now better done as a bitmap OR indexscan.
This allows considerable simplification in nodeIndexscan.c itself as
well as several planner modules concerned with indexscan plan generation.
Also we can improve the sharing of code between regular and bitmap
indexscans, since they are now working with nigh-identical Plan nodes.
make some estimate of which available indexes to AND together, rather
than blindly taking 'em all. This could probably stand further
improvement, but it seems to do OK in simple tests.
but the code is basically working. Along the way, rewrite the entire
approach to processing OR index conditions, and make it work in join
cases for the first time ever. orindxpath.c is now basically obsolete,
but I left it in for the time being to allow easy comparison testing
against the old implementation.
into indexscans on matching indexes. For the moment, it only handles
int4 and text datatypes; next step is to add a column to pg_aggregate
so that all MIN/MAX aggregates can be handled. Per my recent proposal.
really ought to run before canonicalize_qual, because it can now produce
forms that canonicalize_qual knows how to improve (eg, NOT clauses).
Also, because eval_const_expressions already knows about flattening
nested ANDs and ORs into N-argument form, the initial flatten_andors
pass in canonicalize_qual is now completely redundant and can be
removed. This doesn't save a whole lot of code, but the time and
palloc traffic eliminated is a useful gain on large expression trees.
structs. There are many places in the planner where we were passing
both a rel and an index to subroutines, and now need only pass the
index struct. Notationally simpler, and perhaps a tad faster.
for boolean indexes. Previously we would only use such an index with
WHERE clauses like 'indexkey = true' or 'indexkey = false'. The new
code transforms the cases 'indexkey', 'NOT indexkey', 'indexkey IS TRUE',
and 'indexkey IS FALSE' into one of these. While this is only marginally
useful in itself, I intend soon to change constant-expression simplification
so that 'foo = true' and 'foo = false' are reduced to just 'foo' and
'NOT foo' ... which would lose the ability to use boolean indexes for
such queries at all, if the indexscan machinery couldn't make the
reverse transformation.
of AND and OR clauses. The key point here is that an OR on the
predicate side has to be treated gingerly: we may be able to prove
that the OR is implied even when no one of its components is implied.
For example (x OR y) implies (x OR y OR z) even though no one of x,
y, or z can be individually proven. This code handles both the
example shown recently by Sergey Koshcheyev and the one shown last
October by Dawid Kuroczko.
it was in 7.4, and add some comments explaining why it has to be this way.
I broke it for OR'd index predicates in a fit of code cleanup last summer.
Per example from Sergey Koshcheyev.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
for scanning one term of an OR clause if the index's predicate is implied
by that same OR clause term (possibly in conjunction with top-level WHERE
clauses). Per recent example from Dawid Kuroczko,
http://archives.postgresql.org/pgsql-performance/2004-10/msg00095.php
Also, fix a very long-standing bug in index predicate testing, namely the
bizarre ordering of decomposition of predicate and restriction clauses.
AFAICS the correct way is to break down the predicate all the way, and
then for each component term see if you can prove it from the entire
restriction set. The original coding had a purely-implementation-artifact
distinction between ANDing at the top level and ANDing below that, and
proceeded to get the decomposition order wrong everywhere below the top
level, with the result that even slightly complicated AND/OR predicates
could not be proven. For instance, given
create index foop on foo(f2) where f1=42 or f1=1
or (f1 = 11 and f2 = 55);
the old code would fail to match this index to the query
select * from foo where f1 = 11 and f2 = 55;
when it obviously ought to match.
In the past, we used a 'Lispy' linked list implementation: a "list" was
merely a pointer to the head node of the list. The problem with that
design is that it makes lappend() and length() linear time. This patch
fixes that problem (and others) by maintaining a count of the list
length and a pointer to the tail node along with each head node pointer.
A "list" is now a pointer to a structure containing some meta-data
about the list; the head and tail pointers in that structure refer
to ListCell structures that maintain the actual linked list of nodes.
The function names of the list API have also been changed to, I hope,
be more logically consistent. By default, the old function names are
still available; they will be disabled-by-default once the rest of
the tree has been updated to use the new API names.
only stable and not immutable, pred_test_simple_clause has to guard
against making invalid deductions. Add a test for immutability of
the selected test_op.
predicate of the form 'foo IS NOT NULL' is implied by a WHERE clause
that uses 'foo' in any strict operator or function. Per suggestion
and preliminary implementation by John Siracusa; some further hacking
by moi.
predicate tester. It can now deal with commuted clauses (for
instance, 4 < x implies x > 3), subclauses more complicated than
a simple Var (for example, upper(x) = 't' implies upper(x) > 'a'),
and <> operators (for example, x < 3 implies x <> 4). Still
only understands operators associated with btree opclasses, though.
Inspired by example from Martin Hampl.
with index qual clauses in the Path representation. This saves a little
work during createplan and (probably more importantly) allows reuse of
cached selectivity estimates during indexscan planning. Also fix latent
bug: wrong plan would have been generated for a 'special operator' used
in a nestloop-inner-indexscan join qual, because the special operator
would not have gotten into the list of quals to recheck. This bug is
only latent because at present the special-operator code could never
trigger on a join qual, but sooner or later someone will want to do it.
join conditions in which each OR subclause includes a constraint on
the same relation. This implements the other useful side-effect of
conversion to CNF format, without its unpleasant side-effects. As
per pghackers discussion of a few weeks ago.
teaching the latter to accept either RestrictInfo nodes or bare
clause expressions; and cache the selectivity result in the RestrictInfo
node when possible. This extends the caching behavior of approx_selectivity
to many more contexts, and should reduce duplicate selectivity
calculations.
first time generate an OR indexscan for a two-column index when the WHERE
condition is like 'col1 = foo AND (col2 = bar OR col2 = baz)' --- before,
the OR had to be on the first column of the index or we'd not notice the
possibility of using it. Some progress towards extracting OR indexscans
from subclauses of an OR that references multiple relations, too, although
this code is #ifdef'd out because it needs more work.
fields: now they are valid whenever the clause is a binary opclause,
not only when it is a potential join clause (there is a new boolean
field canjoin to signal the latter condition). This lets us avoid
recomputing the relid sets over and over while examining indexes.
Still more work to do to make this as useful as it could be, because
there are places that could use the info but don't have access to the
RestrictInfo node.
where a joinclause is redundant with a restriction clause. Original coding
believed this was impossible and didn't need to be checked for, but that
was a thinko ...
pghackers proposal of 8-Nov. All the existing cross-type comparison
operators (int2/int4/int8 and float4/float8) have appropriate support.
The original proposal of storing the right-hand-side datatype as part of
the primary key for pg_amop and pg_amproc got modified a bit in the event;
it is easier to store zero as the 'default' case and only store a nonzero
when the operator is actually cross-type. Along the way, remove the
long-since-defunct bigbox_ops operator class.
