it is sufficient to track whether a backend holds a lock or not, and
store information about transaction vs. session locks only in the
inside-the-backend LocalLockTable. Since there can now be but one
PROCLOCK per lock per backend, LockCountMyLocks() is no longer needed,
thus eliminating some O(N^2) behavior when a backend holds many locks.
Also simplify the LockAcquire/LockRelease API by passing just a
'sessionLock' boolean instead of a transaction ID. The previous API
was designed with the idea that per-transaction lock holding would be
important for subtransactions, but now that we have subtransactions we
know that this is unwanted. While at it, add an 'isTempObject' parameter
to LockAcquire to indicate whether the lock is being taken on a temp
table. This is not used just yet, but will be needed shortly for
two-phase commit.
are now reported via elog, eliminating the need to test the result code
at most call sites. Make it possible for the caller to distinguish a
freshly acquired lock from one already held in the current transaction.
Use that capability to avoid redundant AcceptInvalidationMessages() calls
in LockRelation().
communication structure, and make it its own module with its own lock.
This should reduce contention at least a little, and it definitely makes
the code seem cleaner. Per my recent proposal.
is contention for a tuple-level lock. This solves the problem of a
would-be exclusive locker being starved out by an indefinite succession
of share-lockers. Per recent discussion with Alvaro.
Essentially, we shoehorn in a lockable-object-type field by taking
a byte away from the lockmethodid, which can surely fit in one byte
instead of two. This allows less artificial definitions of all the
other fields of LOCKTAG; we can get rid of the special pg_xactlock
pseudo-relation, and also support locks on individual tuples and
general database objects (including shared objects). None of those
possibilities are actually exploited just yet, however.
I removed pg_xactlock from pg_class, but did not force initdb for
that change. At this point, relkind 's' (SPECIAL) is unused and
could be removed entirely.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
as per recent discussions. Invent SubTransactionIds that are managed like
CommandIds (ie, counter is reset at start of each top transaction), and
use these instead of TransactionIds to keep track of subtransaction status
in those modules that need it. This means that a subtransaction does not
need an XID unless it actually inserts/modifies rows in the database.
Accordingly, don't assign it an XID nor take a lock on the XID until it
tries to do that. This saves a lot of overhead for subtransactions that
are only used for error recovery (eg plpgsql exceptions). Also, arrange
to release a subtransaction's XID lock as soon as the subtransaction
exits, in both the commit and abort cases. This avoids holding many
unique locks after a long series of subtransactions. The price is some
additional overhead in XactLockTableWait, but that seems acceptable.
Finally, restructure the state machine in xact.c to have a more orthogonal
set of states for subtransactions.
RecentXmin (== MyProc->xmin). This ensures that it will be safe to
truncate pg_subtrans at RecentGlobalXmin, which should largely eliminate
any fear of bloat. Along the way, eliminate SubTransXidsHaveCommonAncestor,
which isn't really needed and could not give a trustworthy result anyway
under the lookback restriction.
In an unrelated but nearby change, #ifdef out GetUndoRecPtr, which has
been dead code since 2001 and seems unlikely to ever be resurrected.
password/group files. Also allow read-only subtransactions of a read-write
parent, but not vice versa. These are the reasonably noncontroversial
parts of Alvaro's recent mop-up patch, plus further work on large objects
to minimize use of the TopTransactionResourceOwner.
SAVEPOINT/RELEASE/ROLLBACK-TO syntax. (Alvaro)
Cause COMMIT of a failed transaction to report ROLLBACK instead of
COMMIT in its command tag. (Tom)
Fix a few loose ends in the nested-transactions stuff.
performance front, but with feature freeze upon us I think it's time to
drive a stake in the ground and say that this will be in 7.5.
Alvaro Herrera, with some help from Tom Lane.
about a third, make it work on non-Windows platforms again. (But perhaps
I broke the WIN32 code, since I have no way to test that.) Fold all the
paths that fork postmaster child processes to go through the single
routine SubPostmasterMain, which takes care of resurrecting the state that
would normally be inherited from the postmaster (including GUC variables).
Clean up some places where there's no particularly good reason for the
EXEC and non-EXEC cases to work differently. Take care of one or two
FIXMEs that remained in the code.
method control structure, or a table of control structures.
. Use type LOCKMASK where an int is not a counter.
. Get rid of INVALID_TABLEID, use INVALID_LOCKMETHOD instead.
. Use INVALID_LOCKMETHOD instead of (LOCKMETHOD) NULL, because
LOCKMETHOD is not a pointer.
. Define and use macro LockMethodIsValid.
. Rename LOCKMETHOD to LOCKMETHODID.
. Remove global variable LongTermTableId in lmgr.c, because it is
never used.
. Make LockTableId static in lmgr.c, because it is used nowhere else.
Why not remove it and use DEFAULT_LOCKMETHOD?
. Rename the lock method control structure from LOCKMETHODTABLE to
LockMethodData. Introduce a pointer type named LockMethod.
. Remove elog(FATAL) after InitLockTable() call in
CreateSharedMemoryAndSemaphores(), because if something goes wrong,
there is elog(FATAL) in LockMethodTableInit(), and if this doesn't
help, an elog(ERROR) in InitLockTable() is promoted to FATAL.
. Make InitLockTable() void, because its only caller does not use its
return value any more.
. Rename variables in lock.c to avoid statements like
LockMethodTable[NumLockMethods] = lockMethodTable;
lockMethodTable = LockMethodTable[lockmethod];
. Change LOCKMETHODID type to uint16 to fit into struct LOCKTAG.
. Remove static variables BITS_OFF and BITS_ON from lock.c, because
I agree to this doubt:
* XXX is a fetch from a static array really faster than a shift?
. Define and use macros LOCKBIT_ON/OFF.
Manfred Koizar
pghackers. This fixes the problem recently reported by Markus KrÌutner
(hash bucket split corrupts the state of scans being done concurrently),
and I believe it also fixes all the known problems with deadlocks in
hash index operations. Hash indexes are still not really ready for prime
time (since they aren't WAL-logged), but this is a step forward.
RelOid_pg_class, and transaction locks XactLockTableId. RelId is renamed
to objId.
- LockObject() and UnlockObject() functions created, and their use
sprinkled throughout the code to do descent locking for domains and
types. They accept lock modes AccessShare and AccessExclusive, as we
only really need a 'read' and 'write' lock at the moment. Most locking
cases are held until the end of the transaction.
This fixes the cases Tom mentioned earlier in regards to locking with
Domains. If the patch is good, I'll work on cleaning up issues with
other database objects that have this problem (most of them).
Rod Taylor
buffer manager with 'pg_clog', a specialized access method modeled
on pg_xlog. This simplifies startup (don't need to play games to
open pg_log; among other things, OverrideTransactionSystem goes away),
should improve performance a little, and opens the door to recycling
commit log space by removing no-longer-needed segments of the commit
log. Actual recycling is not there yet, but I felt I should commit
this part separately since it'd still be useful if we chose not to
do transaction ID wraparound.
SI messages now include the relevant database OID, so that operations
in one database do not cause useless cache flushes in backends attached
to other databases. Declare SI messages properly using a union, to
eliminate the former assumption that Oid is the same size as int or Index.
Rewrite the nearly-unreadable code in inval.c, and document it better.
Arrange for catcache flushes at end of command/transaction to happen before
relcache flushes do --- this avoids loading a new tuple into the catcache
while setting up new relcache entry, only to have it be flushed again
immediately.
pg_database now has unique indexes on oid and on datname.
pg_shadow now has unique indexes on usename and on usesysid.
pg_am now has unique index on oid.
pg_opclass now has unique index on oid.
pg_amproc now has unique index on amid+amopclaid+amprocnum.
Remove pg_rewrite's unnecessary index on oid, delete unused RULEOID syscache.
Remove index on pg_listener and associated syscache for performance reasons
(caching rows that are certain to change before you need 'em again is
rather pointless).
Change pg_attrdef's nonunique index on adrelid into a unique index on
adrelid+adnum.
Fix various incorrect settings of pg_class.relisshared, make that the
primary reference point for whether a relation is shared or not.
IsSharedSystemRelationName() is now only consulted to initialize relisshared
during initial creation of tables and indexes. In theory we might now
support shared user relations, though it's not clear how one would get
entries for them into pg_class &etc of multiple databases.
Fix recently reported bug that pg_attribute rows created for an index all have
the same OID. (Proof that non-unique OID doesn't matter unless it's
actually used to do lookups ;-))
There's no need to treat pg_trigger, pg_attrdef, pg_relcheck as bootstrap
relations. Convert them into plain system catalogs without hardwired
entries in pg_class and friends.
Unify global.bki and template1.bki into a single init script postgres.bki,
since the alleged distinction between them was misleading and pointless.
Not to mention that it didn't work for setting up indexes on shared
system relations.
Rationalize locking of pg_shadow, pg_group, pg_attrdef (no need to use
AccessExclusiveLock where ExclusiveLock or even RowExclusiveLock will do).
Also, hold locks until transaction commit where necessary.
level" locks. A session lock is not released at transaction commit (but it
is released on transaction abort, to ensure recovery after an elog(ERROR)).
In VACUUM, use a session lock to protect the master table while vacuuming a
TOAST table, so that the TOAST table can be done in an independent
transaction.
I also took this opportunity to do some cleanup and renaming in the lock
code. The previously noted bug in ProcLockWakeup, that it couldn't wake up
any waiters beyond the first non-wakeable waiter, is now fixed. Also found
a previously unknown bug of the same kind (failure to scan all members of
a lock queue in some cases) in DeadLockCheck. This might have led to failure
to detect a deadlock condition, resulting in indefinite waits, but it's
difficult to characterize the conditions required to trigger a failure.
included by everything that includes bufmgr.h --- it's supposed to be
internals, after all, not part of the API! This fixes the conflict
against FreeBSD headers reported by Rosenman, by making it unnecessary
for s_lock.h to be included by plperl.c.
That means you can now set your options in either or all of $PGDATA/configuration,
some postmaster option (--enable-fsync=off), or set a SET command. The list of
options is in backend/utils/misc/guc.c, documentation will be written post haste.
pg_options is gone, so is that pq_geqo config file. Also removed were backend -K,
-Q, and -T options (no longer applicable, although -d0 does the same as -Q).
Added to configure an --enable-syslog option.
changed all callers from TPRINTF to elog(DEBUG)
additional argument specifying the kind of lock to acquire/release (or
'NoLock' to do no lock processing). Ensure that all relations are locked
with some appropriate lock level before being examined --- this ensures
that relevant shared-inval messages have been processed and should prevent
problems caused by concurrent VACUUM. Fix several bugs having to do with
mismatched increment/decrement of relation ref count and mismatched
heap_open/close (which amounts to the same thing). A bogus ref count on
a relation doesn't matter much *unless* a SI Inval message happens to
arrive at the wrong time, which is probably why we got away with this
sloppiness for so long. Repair missing grab of AccessExclusiveLock in
DROP TABLE, ALTER/RENAME TABLE, etc, as noted by Hiroshi.
Recommend 'make clean all' after pulling this update; I modified the
Relation struct layout slightly.
Will post further discussion to pghackers list shortly.
has positive refcount, it is rebuilt from pg_class data. This ensures
that relcache entries will track changes made by other backends. Formerly,
a shared inval report would just be ignored if it happened to arrive while
the relcache entry was in use. Also, fix relcache to reset ref counts
to zero during transaction abort. Finally, change LockRelation() so that
it checks for shared inval reports after obtaining the lock. In this way,
once any kind of lock has been obtained on a rel, we can trust the relcache
entry to be up-to-date.
