This case should be disallowed, just as FOR UPDATE with a plain
GROUP BY is disallowed; FOR UPDATE only makes sense when each row
of the query result can be identified with a single table row.
However, we missed teaching CheckSelectLocking() to check
groupingSets as well as groupClause, so that it would allow
degenerate grouping sets. That resulted in a bad plan and
a null-pointer dereference in the executor.
Looking around for other instances of the same bug, the only one
I found was in examine_simple_variable(). That'd just lead to
silly estimates, but it should be fixed too.
Per private report from Yaoguang Chen.
Back-patch to all supported branches.
Our infinite_recurse() test to verify sane stack-overrun behavior
is affected by a bug of the Linux kernel on PPC64: it will get SIGSEGV
if it receives a signal when the stack depth is (a) over 1MB and
(b) within a few kB of filling the current physical stack allocation.
See https://bugzilla.kernel.org/show_bug.cgi?id=205183.
Since this test is a bit time-consuming and we run it in parallel with
test scripts that do a lot of DDL, it can be expected to get an sinval
catchup interrupt at some point, leading to failure if the timing is
wrong. This has caused more than 100 buildfarm failures over the
past year or so.
While a fix exists for the kernel bug, it might be years before that
propagates into all production kernels, particularly in some of the
older distros we have in the buildfarm. For now, let's just back off
and not run this test on Linux PPC64; that loses nothing in test
coverage so far as our own code is concerned.
To do that, split this test into a new script infinite_recurse.sql
and skip the test when the platform name is powerpc64...-linux-gnu.
Back-patch to v12. Branches before that have not been seen to get
this failure. No doubt that's because the "errors" test was not
run in parallel with other tests before commit 798070ec0, greatly
reducing the odds of an sinval catchup being necessary.
I also back-patched 3c8553547 into v12, just so the new regression
script would look the same in all branches having it.
Discussion: https://postgr.es/m/3479046.1602607848@sss.pgh.pa.us
Discussion: https://postgr.es/m/20190723162703.GM22387%40telsasoft.com
Since commit 8f59f6b9c0, CLOBBER_CACHE_ALWAYS buildfarm members have
been failing this test case because the error message now sometimes
includes an error cursor position. It seems largely just luck that
that never happened before, and there are likely to be more ways it
could happen in future. Hence, rather than trying to prevent it,
adjust the test script to suppress that component of the report.
At some point we might need to back-patch this, but refrain until
there's a demonstrated need. (We'd need a different fix before v12,
anyway, since VERBOSITY=sqlstate is a recent thing.)
Tom Lane and Andres Freund
Discussion: https://postgr.es/m/30675.1586111599@sss.pgh.pa.us
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
This fixes a problem noted as a followup to bug #8648: if a query has a
semantically-empty target list, e.g. SELECT * FROM zero_column_table,
ruleutils.c will dump it as a syntactically-empty target list, which was
not allowed. There doesn't seem to be any reliable way to fix this by
hacking ruleutils (note in particular that the originally zero-column table
might since have had columns added to it); and even if we had such a fix,
it would do nothing for existing dump files that might contain bad syntax.
The best bet seems to be to relax the syntactic restriction.
Also, add parse-analysis errors for SELECT DISTINCT with no columns (after
*-expansion) and RETURNING with no columns. These cases previously
produced unexpected behavior because the parsed Query looked like it had
no DISTINCT or RETURNING clause, respectively. If anyone ever offers
a plausible use-case for this, we could work a bit harder on making the
situation distinguishable.
Arguably this is a bug fix that should be back-patched, but I'm worried
that there may be client apps or PLs that expect "SELECT ;" to throw a
syntax error. The issue doesn't seem important enough to risk changing
behavior in minor releases.
pass if "default_with_oids" is set to false. I took the approach of
explicitly adding WITH OIDS to the CREATE TABLEs where necessary, rather
than tweaking the default_with_oids GUC var.
discussions. Patch by Fabien Coelho and Tom Lane. Still needs to be
taught about multi-screen-column kanji characters; Tatsuo has promised
to provide the needed infrastructure for that.
division and modulo functions, to avoid problems on OS X (which fails to
trap 0 divide at all) and Windows (which traps it in some bizarre
nonstandard fashion). Standardize on 'division by zero' as the one true
spelling of this error message. Add regression tests as suggested by
Neil Conway.
DROP RULE and COMMENT ON RULE syntax adds an 'ON tablename' clause,
similar to TRIGGER syntaxes. To allow loading of existing pg_dump
files containing COMMENT ON RULE, the COMMENT code will still accept
the old syntax --- but only if the target rulename is unique across
the whole database.
'aggname (aggtype)'. The old syntax 'aggname aggtype' is still accepted
for backwards compatibility. Fix pg_dump, which was actually broken for
most cases of user-defined aggregates. Clean up error messages associated
with these commands.
There's now only one transition value and transition function.
NULL handling in aggregates is a lot cleaner. Also, use Numeric
accumulators instead of integer accumulators for sum/avg on integer
datatypes --- this avoids overflow at the cost of being a little slower.
Implement VARIANCE() and STDDEV() aggregates in the standard backend.
Also, enable new LIKE selectivity estimators by default. Unrelated
change, but as long as I had to force initdb anyway...
SELECT DISTINCT ON (expr [, expr ...]) targetlist ...
and there is a check to make sure that the user didn't specify an ORDER BY
that's incompatible with the DISTINCT operation.
Reimplement nodeUnique and nodeGroup to use the proper datatype-specific
equality function for each column being compared --- they used to do
bitwise comparisons or convert the data to text strings and strcmp().
(To add insult to injury, they'd look up the conversion functions once
for each tuple...) Parse/plan representation of DISTINCT is now a list
of SortClause nodes.
initdb forced by querytree change...
