right thing with variable-free clauses that contain noncachable functions,
such as 'WHERE random() < 0.5' --- these are evaluated once per
potential output tuple. Expressions that contain only Params are
now candidates to be indexscan quals --- for example, 'var = ($1 + 1)'
can now be indexed. Cope with RelabelType nodes atop potential indexscan
variables --- this oversight prevents 7.0.* from recognizing some
potentially indexscanable situations.
memory contexts. Currently, only leaks in expressions executed as
quals or projections are handled. Clean up some old dead cruft in
executor while at it --- unused fields in state nodes, that sort of thing.
materialized tupleset is small enough) instead of a temporary relation.
This was something I was thinking of doing anyway for performance, and Jan
says he needs it for TOAST because he doesn't want to cope with toasting
noname relations. With this change, the 'noname table' support in heap.c
is dead code, and I have accordingly removed it. Also clean up 'noname'
plan handling in planner --- nonames are either sort or materialize plans,
and it seems less confusing to handle them separately under those names.
think that both sides of indexqual look like index keys. An example is
create table inside (f1 float8 primary key);
create table outside (g1 float8, g2 float8);
select * from inside,outside where f1 = atan2(g1+1, g2);
ERROR: ExecInitIndexScan: both left and right ops are rel-vars
(note that failure is potentially platform-dependent). Solution is a
cleanup I had had in mind to make anyway: functional index keys should
be represented as Var nodes in the fixed indexqual, just like regular
index keys.
WHERE in a place where it can be part of a nestloop inner indexqual.
As the code stood, it put the same physical sub-Plan node into both
indxqual and indxqualorig of the IndexScan plan node. That confused
later processing in the optimizer (which expected that tracing the
subPlan list would visit each subplan node exactly once), and would
probably have blown up in the executor if the planner hadn't choked first.
Fix by making the 'fixed' indexqual be a complete deep copy of the
original indexqual, rather than trying to share nodes below the topmost
operator node. This had further ramifications though, because we were
making the aforesaid list of sub-Plan nodes during SS_process_sublinks
which is run before construction of the 'fixed' indexqual, meaning that
the copy of the sub-Plan didn't show up in that list. Fix by rearranging
logic so that the sub-Plan list is built by the final set_plan_references
pass, not in SS_process_sublinks. This may sound like a mess, but it's
actually a good deal cleaner now than it was before, because we are no
longer dependent on the assumption that planning will never make a copy
of a sub-Plan node.
costs using the inner path's parent->rows count as the number of tuples
processed per inner scan iteration. This is wrong when we are using an
inner indexscan with indexquals based on join clauses, because the rows
count in a Relation node reflects the selectivity of the restriction
clauses for that rel only. Upshot was that if join clause was very
selective, we'd drastically overestimate the true cost of the join.
Fix is to calculate correct output-rows estimate for an inner indexscan
when the IndexPath node is created and save it in the path node.
Change of path node doesn't require initdb, since path nodes don't
appear in saved rules.
accesses versus sequential accesses, a (very crude) estimate of the
effects of caching on random page accesses, and cost to evaluate WHERE-
clause expressions. Export critical parameters for this model as SET
variables. Also, create SET variables for the planner's enable flags
(enable_seqscan, enable_indexscan, etc) so that these can be controlled
more conveniently than via PGOPTIONS.
Planner now estimates both startup cost (cost before retrieving
first tuple) and total cost of each path, so it can optimize queries
with LIMIT on a reasonable basis by interpolating between these costs.
Same facility is a win for EXISTS(...) subqueries and some other cases.
Redesign pathkey representation to achieve a major speedup in planning
(I saw as much as 5X on a 10-way join); also minor changes in planner
to reduce memory consumption by recycling discarded Path nodes and
not constructing unnecessary lists.
Minor cleanups to display more-plausible costs in some cases in
EXPLAIN output.
Initdb forced by change in interface to index cost estimation
functions.
fields in JoinPaths --- turns out that we do need that after all :-(.
Also, rearrange planner so that only one RelOptInfo is created for a
particular set of joined base relations, no matter how many different
subsets of relations it can be created from. This saves memory and
processing time compared to the old method of making a bunch of RelOptInfos
and then removing the duplicates. Clean up the jointree iteration logic;
not sure if it's better, but I sure find it more readable and plausible
now, particularly for the case of 'bushy plans'.
SELECT DISTINCT ON (expr [, expr ...]) targetlist ...
and there is a check to make sure that the user didn't specify an ORDER BY
that's incompatible with the DISTINCT operation.
Reimplement nodeUnique and nodeGroup to use the proper datatype-specific
equality function for each column being compared --- they used to do
bitwise comparisons or convert the data to text strings and strcmp().
(To add insult to injury, they'd look up the conversion functions once
for each tuple...) Parse/plan representation of DISTINCT is now a list
of SortClause nodes.
initdb forced by querytree change...
and fix_opids processing to a single recursive pass over the plan tree
executed at the very tail end of planning, rather than haphazardly here
and there at different places. Now that tlist Vars do not get modified
until the very end, it's possible to get rid of the klugy var_equal and
match_varid partial-matching routines, and just use plain equal()
throughout the optimizer. This is a step towards allowing merge and
hash joins to be done on expressions instead of only Vars ...
sort order down into planner, instead of handling it only at the very top
level of the planner. This fixes many things. An explicit sort is now
avoided if there is a cheaper alternative (typically an indexscan) not
only for ORDER BY, but also for the internal sort of GROUP BY. It works
even when there is no other reason (such as a WHERE condition) to consider
the indexscan. It works for indexes on functions. It works for indexes
on functions, backwards. It's just so cool...
CAUTION: I have changed the representation of SortClause nodes, therefore
THIS UPDATE BREAKS STORED RULES. You will need to initdb.
above a Sort or Materialize node. As far as I can tell, the only place
that actually needed that was set_tlist_references, which was being lazy
about checking to see if it had a noname node to fix or not...
store all ordering information in pathkeys lists (which are now lists of
lists of PathKeyItem nodes, not just lists of lists of vars). This was
a big win --- the code is smaller and IMHO more understandable than it
was, even though it handles more cases. I believe the node changes will
not force an initdb for anyone; planner nodes don't show up in stored
rules.
commuted (ie, the index var appears on the right). These are now handled
the same way as merge and hash join quals that need to be commuted: the
actual reversing of the clause only happens if we actually choose the path
and generate a plan from it. Furthermore, the clause is only reversed in
the 'indexqual' field of the plan, not in the 'indxqualorig' field. This
allows the clause to still be recognized and removed from qpquals of upper
level join plans. Also, simplify and generalize match_clause_to_indexkey;
now it recognizes binary-compatible indexes for join as well as restriction
clauses.
work under a wider range of scenarios than it did --- it formerly did not
handle a multi-pass inner scan, nor cases in which the inner scan's
indxqualorig or non-index qual contained outer var references. I am not
sure that these limitations could be hit in the existing optimizer, but
they need to be fixed for future expansion.
> >
> > was implemented by Jan Wieck.
> > His work is for ascending order cases.
> >
> > Here is a patch to prevent sorting also in descending
> > order cases.
> > Because I had already changed _bt_first() to position
> > backward correctly before v6.5,this patch would work.
> >
Hiroshi Inoue
Inoue@tpf.co.jp
multi-scan indexscan plans; it tried to use the same table-to-index
attribute mapping for all the scans, even if they used different indexes.
It would klugily work as long as OR indexquals never used multikey indexes,
but that's not likely to hold up much longer...
so that Case works in WHERE join clauses. Temporary patch --- this routine
is one of many that ought to be changed to use centralized expression-tree-
walking logic.
optimizer rather than parser. This has many advantages, such as not
getting fooled by chance uses of operator names ~ and ~~ (the operators
are identified by OID now), and not creating useless comparison operations
in contexts where the comparisons will not actually be used as indexquals.
The new code also recognizes exact-match LIKE and regex patterns, and
produces an = indexqual instead of >= and <=.
This change does NOT fix the problem with non-ASCII locales: the code
still doesn't know how to generate an upper bound indexqual for non-ASCII
collation order. But it's no worse than before, just the same deficiency
in a different place...
Also, dike out loc_restrictinfo fields in Plan nodes. These were doing
nothing useful in the absence of 'expensive functions' optimization,
and they took a considerable amount of processing to fill in.
identified by Hiroshi (incorrect cost attributed to OR clauses
after multiple passes through set_rest_selec()). I think the code
was trying to allow selectivities of OR subclauses to be passed in
from outside, but noplace was actually passing any useful data, and
set_rest_selec() was passing wrong data.
Restructure representation of "indexqual" in IndexPath nodes so that
it is the same as for indxqual in completed IndexScan nodes: namely,
a toplevel list with an entry for each pass of the index scan, having
sublists that are implicitly-ANDed index qual conditions for that pass.
You don't want to know what the old representation was :-(
Improve documentation of OR-clause indexscan functions.
Remove useless 'notclause' field from RestrictInfo nodes. (This might
force an initdb for anyone who has stored rules containing RestrictInfos,
but I do not think that RestrictInfo ever appears in completed plans.)
so remove them from MergeJoin node. Hack together a partial
solution for commuted mergejoin operators --- yesterday
a mergejoin int4 = int8 would crash if the planner decided to
commute it, today it works. The planner's representation of
mergejoins really needs a rewrite though.
Also, further testing of mergejoin ops in opr_sanity regress test.
Ok. I made patches replacing all of "#if FALSE" or "#if 0" to "#ifdef
NOT_USED" for current. I have tested these patches in that the
postgres binaries are identical.
