pg_listener modifications commanded by LISTEN and UNLISTEN until the end
of the current transaction. This allows us to hold the ExclusiveLock on
pg_listener until after commit, with no greater risk of deadlock than there
was before. Aside from fixing the race condition, this gets rid of a
truly ugly kludge that was there before, namely having to ignore
HeapTupleBeingUpdated failures during NOTIFY. There is a small potential
incompatibility, which is that if a transaction issues LISTEN or UNLISTEN
and then looks into pg_listener before committing, it won't see any resulting
row insertion or deletion, where before it would have. It seems unlikely
that anyone would be depending on that, though.
This patch also disallows LISTEN and UNLISTEN inside a prepared transaction.
That case had some pretty undesirable properties already, such as possibly
allowing pg_listener entries to be made for PIDs no longer present, so
disallowing it seems like a better idea than trying to maintain the behavior.
but no database changes have been made since the last CommandCounterIncrement.
This should result in a significant improvement in the number of "commands"
that can typically be performed within a transaction before hitting the 2^32
CommandId size limit. In particular this buys back (and more) the possible
adverse consequences of my previous patch to fix plan caching behavior.
The implementation requires tracking whether the current CommandCounter
value has been "used" to mark any tuples. CommandCounter values stored into
snapshots are presumed not to be used for this purpose. This requires some
small executor changes, since the executor used to conflate the curcid of
the snapshot it was using with the command ID to mark output tuples with.
Separating these concepts allows some small simplifications in executor APIs.
Something for the TODO list: look into having CommandCounterIncrement not do
AcceptInvalidationMessages. It seems fairly bogus to be doing it there,
but exactly where to do it instead isn't clear, and I'm disinclined to mess
with asynchronous behavior during late beta.
reviewed by Neil Conway. This patch adds the following DDL command
variants: RESET SESSION, RESET TEMP, RESET PLANS, CLOSE ALL, and
DEALLOCATE ALL. RESET SESSION is intended for use by connection
pool software and the like, in order to reset a client session
to something close to its initial state.
Note that while most of these command variants can be executed
inside a transaction block (but are not transaction-aware!),
RESET SESSION cannot. While this is inconsistent, it is intended
to catch programmer mistakes: RESET SESSION in an open transaction
block is probably unintended.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
insufficient paranoia in code that follows t_ctid links. (We must do both
because even with VACUUM doing it properly, the intermediate state with
a dangling t_ctid link is visible concurrently during lazy VACUUM, and
could be seen afterwards if either type of VACUUM crashes partway through.)
Also try to improve documentation about what's going on. Patch is a bit
bulky because passing the XMAX information around required changing the
APIs of some low-level heapam.c routines, but it's not conceptually very
complicated. Per trouble report from Teodor and subsequent analysis.
This needs to be back-patched, but I'll do that after 8.1 beta is out.
which is neither needed by nor related to that header. Remove the bogus
inclusion and instead include the header in those C files that actually
need it. Also fix unnecessary inclusions and bad inclusion order in
tsearch2 files.
indexes. Replace all heap_openr and index_openr calls by heap_open
and index_open. Remove runtime lookups of catalog OID numbers in
various places. Remove relcache's support for looking up system
catalogs by name. Bulky but mostly very boring patch ...
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
((Snapshot) NULL) can no longer be confused with a valid snapshot,
as per my recent suggestion. Define a macro InvalidSnapshot for 0.
Use InvalidSnapshot instead of SnapshotAny as the do-nothing special
case for heap_update and heap_delete crosschecks; this seems a little
cleaner even though the behavior is really the same.
Asserts would lead to a server core dump if an error occurred while
trying to abort a failed subtransaction (thereby leading to re-execution
of whatever parts of AbortSubTransaction had already run). This of course
does not prevent such an error from creating an infinite loop, but at
least we don't make the situation worse. Responds to an open item on
the subtransactions to-do list.
performance front, but with feature freeze upon us I think it's time to
drive a stake in the ground and say that this will be in 7.5.
Alvaro Herrera, with some help from Tom Lane.
In the past, we used a 'Lispy' linked list implementation: a "list" was
merely a pointer to the head node of the list. The problem with that
design is that it makes lappend() and length() linear time. This patch
fixes that problem (and others) by maintaining a count of the list
length and a pointer to the tail node along with each head node pointer.
A "list" is now a pointer to a structure containing some meta-data
about the list; the head and tail pointers in that structure refer
to ListCell structures that maintain the actual linked list of nodes.
The function names of the list API have also been changed to, I hope,
be more logically consistent. By default, the old function names are
still available; they will be disabled-by-default once the rest of
the tree has been updated to use the new API names.
(SIGUSR1, which we have not been using recently) instead of piggybacking
on SIGUSR2-driven NOTIFY processing. This has several good results:
the processing needed to drain the sinval queue is a lot less than the
processing needed to answer a NOTIFY; there's less contention since we
don't have a bunch of backends all trying to acquire exclusive lock on
pg_listener; backends that are sitting inside a transaction block can
still drain the queue, whereas NOTIFY processing can't run if there's
an open transaction block. (This last is a fairly serious issue that
I don't think we ever recognized before --- with clients like JDBC that
tend to sit with open transaction blocks, the sinval queue draining
mechanism never really worked as intended, probably resulting in a lot
of useless cache-reset overhead.) This is the last of several proposed
changes in response to Philip Warner's recent report of sinval-induced
performance problems.
to ExclusiveLock. This still serializes the operations of this module,
but doesn't conflict with concurrent ANALYZE operations. Per trouble
report from Philip Warner a few weeks ago.
Natoli and Bruce Momjian (and some cosmetic fixes from Neil Conway).
Changes:
- remove duplicate signal definitions from pqsignal.h
- replace pqkill() with kill() and redefine kill() in Win32
- use ereport() in place of fprintf() in some error handling in
pqsignal.c
- export pg_queue_signal() and make use of it where necessary
- add a console control handler for Ctrl-C and similar handling
on Win32
- do WaitForSingleObjectEx() in CHECK_FOR_INTERRUPTS() on Win32;
query cancelling should now work on Win32
- various other fixes and cleanups
against the latest shapshot. It also includes the replacement of kill()
with pqkill() and sigsetmask() with pqsigsetmask().
Passes all tests fine on my linux machine once applied. Still doesn't
link completely on Win32 - there are a few things still required. But
much closer than before.
At Bruce's request, I'm goint to write up a README file about the method
of signals delivery chosen and why the others were rejected (basically a
summary of the mailinglist discussions). I'll finish that up once/if the
patch is accepted.
Magnus Hagander
pointer type when it is not necessary to do so.
For future reference, casting NULL to a pointer type is only necessary
when (a) invoking a function AND either (b) the function has no prototype
OR (c) the function is a varargs function.
pghackers proposal of 8-Nov. All the existing cross-type comparison
operators (int2/int4/int8 and float4/float8) have appropriate support.
The original proposal of storing the right-hand-side datatype as part of
the primary key for pg_amop and pg_amproc got modified a bit in the event;
it is easier to store zero as the 'default' case and only store a nonzero
when the operator is actually cross-type. Along the way, remove the
long-since-defunct bigbox_ops operator class.
Remove the 'strategy map' code, which was a large amount of mechanism
that no longer had any use except reverse-mapping from procedure OID to
strategy number. Passing the strategy number to the index AM in the
first place is simpler and faster.
This is a preliminary step in planned support for cross-datatype index
operations. I'm committing it now since the ScanKeyEntryInitialize()
API change touches quite a lot of files, and I want to commit those
changes before the tree drifts under me.
protocol, per report from Igor Shevchenko. NOTIFY thought it could
do its thing if transaction blockState is TBLOCK_DEFAULT, but in
reality it had better check the low-level transaction state is
TRANS_DEFAULT as well. Formerly it was not possible to wait for the
client in a state where the first is true and the second is not ...
but now we can have such a state. Minor cleanup in StartTransaction()
as well.
discussion on pgsql-hackers: in READ COMMITTED mode we just have to force
a QuerySnapshot update in the trigger, but in SERIALIZABLE mode we have
to run the scan under a current snapshot and then complain if any rows
would be updated/deleted that are not visible in the transaction snapshot.
really general fix might be difficult, I believe the only case where
AtCommit_Notify could see an uncommitted tuple is where the other guy
has just unlistened and not yet committed. The best solution seems to
be to just skip updating that tuple, on the assumption that the other
guy does not want to hear about the notification anyway. This is not
perfect --- if the other guy rolls back his unlisten instead of committing,
then he really should have gotten this notify. But to do that, we'd have
to wait to see if he commits or not, or make UNLISTEN hold exclusive lock
on pg_listener until commit. Either of these answers is deadlock-prone,
not to mention horrible for interactive performance. Do it this way
for now. (What happened to that project to do LISTEN/NOTIFY in memory
with no table, anyway?)
only remnant of this failed experiment is that the server will take
SET AUTOCOMMIT TO ON. Still TODO: provide some client-side autocommit
logic in libpq.
have length words. COPY OUT reimplemented per new protocol: it doesn't
need \. anymore, thank goodness. COPY BINARY to/from frontend works,
at least as far as the backend is concerned --- libpq's PQgetline API
is not up to snuff, and will have to be replaced with something that is
null-safe. libpq uses message length words for performance improvement
(no cycles wasted rescanning long messages), but not yet for error
recovery.
known problem with failure to respond to 'pg_ctl stop -m fast', and
probable problems if SIGINT or SIGTERM arrives while processing a
SIGUSR2 interrupt that arrived while waiting for a new client query.
(notify/SI-overrun interrupt) while it is in process of doing proc_exit,
it is possible for Async_NotifyHandler() to try to start a transaction
when one is already running. This leads to Asserts() or worse. I think
it may only be possible to occur when frontend synchronization is lost
(ie, the elog(FATAL) in SocketBackend() fires), but that is a standard
occurrence after error during COPY. In any case, I have seen this
failure occur during regression tests, so it is definitely possible.
