Formerly, we could convert a UNION ALL structure inside a subquery-in-FROM
into an appendrel, as a side effect of pulling up the subquery into its
parent; but top-level UNION ALL always caused use of plan_set_operations().
That didn't matter too much because you got an Append-based plan either
way. However, now that the appendrel code can do things with MergeAppend,
it's worthwhile to hack up the top-level case so it also uses appendrels.
This is a bit of a stopgap; but going much further than this will require
a major rewrite of the planner's set-operations support, which I'm not
prepared to undertake now. For the moment let's grab the low-hanging fruit.
This patch merges the responsibility for NOT-flattening into
eval_const_expressions' processing. It wasn't done that way originally
because prepqual.c is far older than eval_const_expressions. But putting
this work into eval_const_expressions saves one pass over the qual trees,
and in fact saves even more than that because we can exploit the knowledge
that the subexpressions have already been recursively simplified. Doing it
this way also lets us do it uniformly over all expressions, whereas
prepqual.c formerly just did it at top level to save cycles. That should
improve the planner's ability to recognize logically-equivalent constructs.
While at it, also add the ability to fold a NOT into BooleanTest and
NullTest constructs (the latter only for the scalar-datatype case).
Per discussion of bug #5702.
a lot of strange behaviors that occurred in join cases. We now identify the
"current" row for every joined relation in UPDATE, DELETE, and SELECT FOR
UPDATE/SHARE queries. If an EvalPlanQual recheck is necessary, we jam the
appropriate row into each scan node in the rechecking plan, forcing it to emit
only that one row. The former behavior could rescan the whole of each joined
relation for each recheck, which was terrible for performance, and what's much
worse could result in duplicated output tuples.
Also, the original implementation of EvalPlanQual could not re-use the recheck
execution tree --- it had to go through a full executor init and shutdown for
every row to be tested. To avoid this overhead, I've associated a special
runtime Param with each LockRows or ModifyTable plan node, and arranged to
make every scan node below such a node depend on that Param. Thus, by
signaling a change in that Param, the EPQ machinery can just rescan the
already-built test plan.
This patch also adds a prohibition on set-returning functions in the
targetlist of SELECT FOR UPDATE/SHARE. This is needed to avoid the
duplicate-output-tuple problem. It seems fairly reasonable since the
other restrictions on SELECT FOR UPDATE are meant to ensure that there
is a unique correspondence between source tuples and result tuples,
which an output SRF destroys as much as anything else does.
find_inheritance_children() and find_all_inheritors(). I got annoyed that
these are buried inside the planner but mostly used elsewhere. So, create
a new file catalog/pg_inherits.c and put them there, along with a couple
of other functions that search pg_inherits.
The code that modifies pg_inherits is (still) in tablecmds.c --- it's
kind of entangled with unrelated code that modifies pg_depend and other
stuff, so pulling it out seemed like a bigger change than I wanted to make
right now. But this file provides a natural home for it if anyone ever
gets around to that.
This commit just moves code around; it doesn't change anything, except
I succumbed to the temptation to make a couple of trivial optimizations
in typeInheritsFrom().
PlaceHolderVar nodes in join quals appearing in or below the lowest
outer join that could null the subquery being pulled up. This improves
the planner's ability to recognize constant join quals, and probably
helps with detection of common sort keys (equivalence classes) as well.
we extended the appendrel mechanism to support UNION ALL optimization. The
reason nobody noticed was that we are not actually using attr_needed data for
appendrel children; hence it seems more reasonable to rip it out than fix it.
Back-patch to 8.2 because an Assert failure is possible in corner cases.
Per examination of an example from Jim Nasby.
In HEAD, also get rid of AppendRelInfo.col_mappings, which is quite inadequate
to represent UNION ALL situations; depend entirely on translated_vars instead.
level of a JOIN/ON clause, not only at top level of WHERE. (However, we
can't do this in an outer join's ON clause, unless the ANY/EXISTS refers
only to the nullable side of the outer join, so that it can effectively
be pushed down into the nullable side.) Per request from Kevin Grittner.
In passing, fix a bug in the initial implementation of EXISTS pullup:
it would Assert if the EXIST's WHERE clause used a join alias variable.
Since we haven't yet flattened join aliases when this transformation
happens, it's necessary to include join relids in the computed set of
RHS relids.
the old JOIN_IN code, but antijoins are new functionality.) Teach the planner
to convert appropriate EXISTS and NOT EXISTS subqueries into semi and anti
joins respectively. Also, LEFT JOINs with suitable upper-level IS NULL
filters are recognized as being anti joins. Unify the InClauseInfo and
OuterJoinInfo infrastructure into "SpecialJoinInfo". With that change,
it becomes possible to associate a SpecialJoinInfo with every join attempt,
which permits some cleanup of join selectivity estimation. That needs to be
taken much further than this patch does, but the next step is to change the
API for oprjoin selectivity functions, which seems like material for a
separate patch. So for the moment the output size estimates for semi and
especially anti joins are quite bogus.
are declared to return set, and consist of just a single SELECT. We
can replace the FROM-item with a sub-SELECT and then optimize much as
if we were dealing with a view. Patch from Richard Rowell, cleaned up
by me.
thereby sharing code with the inheritance case. This puts the UNION-ALL-view
approach to partitioned tables on par with inheritance, so far as constraint
exclusion is concerned: it works either way. (Still need to update the docs
to say so.) The definition of "simple UNION ALL" is a little simpler than
I would like --- basically the union arms can only be SELECT * FROM foo
--- but it's good enough for partitioned-table cases.
inheritance trees on-the-fly, which pretty well constrained us to considering
only one way of planning inheritance, expand inheritance sets during the
planner prep phase, and build a side data structure that can be consulted
later to find which RTEs are members of which inheritance sets. As proof of
concept, use the data structure to plan joins against inheritance sets more
efficiently: we can now use indexes on the set members in inner-indexscan
joins. (The generated plans could be improved further, but it'll take some
executor changes.) This data structure will also support handling UNION ALL
subqueries in the same way as inheritance sets, but that aspect of it isn't
finished yet.
Per my recent proposal. I ended up basing the implementation on the
existing mechanism for enforcing valid join orders of IN joins --- the
rules for valid outer-join orders are somewhat similar.
if the limit were directly applied to it. This does not actually
add a LIMIT plan node to the generated subqueries --- that would be
useless overhead --- but it does cause the planner to prefer fast-
start plans when the limit is small. After an idea from Phil Endecott.
a new PlannerInfo struct, which is passed around instead of the bare
Query in all the planning code. This commit is essentially just a
code-beautification exercise, but it does open the door to making
larger changes to the planner data structures without having to muck
with the widely-known Query struct.
really ought to run before canonicalize_qual, because it can now produce
forms that canonicalize_qual knows how to improve (eg, NOT clauses).
Also, because eval_const_expressions already knows about flattening
nested ANDs and ORs into N-argument form, the initial flatten_andors
pass in canonicalize_qual is now completely redundant and can be
removed. This doesn't save a whole lot of code, but the time and
palloc traffic eliminated is a useful gain on large expression trees.
grouping_planner() to preprocess_targetlist(), according to a comment
in grouping_planner(). I think the refactoring makes sense, and moves
some extraneous details out of grouping_planner().
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
from Sebastian Böck. The fix involves being more consistent about
when rangetable entries are copied or modified. Someday we really
need to fix this stuff to not scribble on its input data structures
in the first place...
by the set operation, so that redundant sorts at higher levels can be
avoided. This was foreseen a good while back, but not done. Per request
from Karel Zak.
about whether it is applied before or after eval_const_expressions().
I believe there were some corner cases where the system would fail to
recognize that a partial index is applicable because of the previous
inconsistency. Store normal rather than 'implicit AND' representations
of constraints and index predicates in the catalogs.
initdb forced due to representation change of constraints/predicates.
into a UNION that has some type coercions applied to the component
queries, so long as the qual itself does not reference any columns that
have such coercions. Per example from Jonathan Bartlett 24-Apr-03.
necessarily following the JOIN syntax to develop the query plan. The old
behavior is still available by setting GUC variable JOIN_COLLAPSE_LIMIT
to 1. Also create a GUC variable FROM_COLLAPSE_LIMIT to control the
similar decision about when to collapse sub-SELECT lists into their parent
lists. (This behavior existed already, but the limit was always
GEQO_THRESHOLD/2; now it's separately adjustable.)
There are two implementation techniques: the executor understands a new
JOIN_IN jointype, which emits at most one matching row per left-hand row,
or the result of the IN's sub-select can be fed through a DISTINCT filter
and then joined as an ordinary relation.
Along the way, some minor code cleanup in the optimizer; notably, break
out most of the jointree-rearrangement preprocessing in planner.c and
put it in a new file prep/prepjointree.c.
create_index_paths are not immediately discarded, but are available for
subsequent planner work. This allows avoiding redundant syscache lookups
in several places. Change interface to operator selectivity estimation
procedures to allow faster and more flexible estimation.
Initdb forced due to change of pg_proc entries for selectivity functions!
joins, and clean things up a good deal at the same time. Append plan node
no longer hacks on rangetable at runtime --- instead, all child tables are
given their own RT entries during planning. Concept of multiple target
tables pushed up into execMain, replacing bug-prone implementation within
nodeAppend. Planner now supports generating Append plans for inheritance
sets either at the top of the plan (the old way) or at the bottom. Expanding
at the bottom is appropriate for tables used as sources, since they may
appear inside an outer join; but we must still expand at the top when the
target of an UPDATE or DELETE is an inheritance set, because we actually need
a different targetlist and junkfilter for each target table in that case.
Fortunately a target table can't be inside an outer join... Bizarre mutual
recursion between union_planner and prepunion.c is gone --- in fact,
union_planner doesn't really have much to do with union queries anymore,
so I renamed it grouping_planner.
SQL92 semantics, including support for ALL option. All three can be used
in subqueries and views. DISTINCT and ORDER BY work now in views, too.
This rewrite fixes many problems with cross-datatype UNIONs and INSERT/SELECT
where the SELECT yields different datatypes than the INSERT needs. I did
that by making UNION subqueries and SELECT in INSERT be treated like
subselects-in-FROM, thereby allowing an extra level of targetlist where the
datatype conversions can be inserted safely.
INITDB NEEDED!
