3c5b0685b9 used setFilePointer() to set the position of the filehandle, but
passed the wrong filehandle, always leaving the position at 0. Instead of just
fixing that, remove use of setFilePointer(), we have a perl fd at this point,
so we can just use perl's seek().
Additionally, the perl filehandle wasn't closed, just the windows filehandle.
Reviewed-By: Andrew Dunstan <andrew@dunslane.net>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20211003173038.64mmhgxctfqn7wl6@alap3.anarazel.de
Backpatch: 9.6-, like 3c5b0685b9
Contrary to the output of native perl, Msys perl generates outputs with
CRLFs characters. There are already places in the TAP code where CRLFs
(\r\n) are automatically converted to LF (\n) on Msys, but we missed a
couple of places when running commands and using their output for
comparison, that would lead to failures.
This problem has been found thanks to the test added in 5adb067 using
TestLib::command_checks_all(), but after a closer look more code paths
were missing a filter.
This is backpatched all the way down to prevent any surprises if a new
test is introduced in stable branches.
Reviewed-by: Andrew Dunstan, Álvaro Herrera
Discussion: https://postgr.es/m/1252480.1631829409@sss.pgh.pa.us
Backpatch-through: 9.6
This is similar to the work done in 8279f68 for TestLib.pm, where
environment variables set may cause unwanted failures if using a
temporary installation with pg_regress. The list of variables reset is
adjusted in each stable branch depending on what is supported.
Comments are added to remember that the lists in TestLib.pm and
pg_regress.c had better be kept in sync.
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/YMNR9GYDn+fHlMta@paquier.xyz
Backpatch-through: 9.6
This variable was present in the list added by 9d660670, but it is not
supported by this branch. Issue noticed while diving into a similar
change for pg_regress.c.
Backpatch-through: 9.6
Various environment variables were not getting reset in the TAP tests,
which would cause failures depending on the tests or the environment
variables involved. For example, PGSSL{MAX,MIN}PROTOCOLVERSION could
cause failures in the SSL tests. Even worse, a junk value of
PGCLIENTENCODING makes a server startup fail. The list of variables
reset is adjusted in each stable branch depending on what is supported.
While on it, simplify a bit the code per a suggestion from Andrew
Dunstan, using a list of variables instead of doing single deletions.
Reviewed-by: Andrew Dunstan, Daniel Gustafsson
Discussion: https://postgr.es/m/YLbjjRpucIeZ78VQ@paquier.xyz
Backpatch-through: 9.6
In order to avoid getting old logfile contents certain functions in
PostgresNode were doing one of two things. On Windows it rotated the
logfile and restarted the server, while elsewhere it truncated the log
file. Both of these are unnecessary. We borrow from the buildfarm which
does this instead: note the size of the logfile before we start, and
then when fetching the logfile skip to that position before accumulating
contents. This is spelled differently on Windows but the effect is the
same. This is largely centralized in TestLib's slurp_file function,
which has a new optional parameter, the offset to skip to before
starting to reading the file. Code in the client becomes much neater.
Backpatch to all live branches.
Michael Paquier, slightly modified by me.
Discussion: https://postgr.es/m/YHajnhcMAI3++pJL@paquier.xyz
PostgresNode already retained base directories in such cases. Stop
using $SIG{__DIE__}, which is redundant with the exit status check, in
lieu of proliferating it to TestLib. Back-patch to 9.6, where commit
88802e0680 introduced retention on
failure.
Reviewed by Daniel Gustafsson.
Discussion: https://postgr.es/m/20200202170155.GA3264196@rfd.leadboat.com
This fixes some TAP suites when using msys Perl and a builddir located
in an msys mount point other than "/". For example, builddir=/c/pg
exhibited the problem, since /c/pg falls in mount point "/c".
Back-patch to 9.6, where tests first started to perform such
translations. In back branches, offer both new and old APIs.
Reviewed by Andrew Dunstan.
Discussion: https://postgr.es/m/20190610045838.GA238501@rfd.leadboat.com
Buildfarm member tern failed src/bin/pg_ctl/t/001_start_stop.pl when a
check_mode_recursive() call overlapped a server's startup-time deletion
of pg_stat/global.stat. Just warn. Also, include errno in the message.
Back-patch to v11, where check_mode_recursive() first appeared.
This complies with the perlcritic policy
Subroutines::RequireFinalReturn, which is a severity 4 policy. Since we
only currently check at severity level 5, the policy is raised to that
level until we move to level 4 or lower, so that any new infringements
will be caught.
A small cosmetic piece of tidying of the pgperlcritic script is
included.
Mike Blackwell
Discussion: https://postgr.es/m/CAESHdJpfFm_9wQnQ3koY3c91FoRQsO-fh02za9R3OEMndOn84A@mail.gmail.com
The vertical tightness settings collapse vertical whitespace between
opening and closing brackets (parentheses, square brakets and braces).
This can make data structures in particular harder to read, and is not
very consistent with our style in non-Perl code. This patch restricts
that setting to parentheses only, and reformats all the perl code
accordingly. Not applying this to parentheses has some unfortunate
effects, so the consensus is to keep the setting for parentheses and not
for the others.
The diff for this patch does highlight some places where structures
should have trailing commas. They can be added manually, as there is no
automatic tool to do so.
Discussion: https://postgr.es/m/a2f2b87c-56be-c070-bfc0-36288b4b41c1@2ndQuadrant.com
Allow the cluster to be optionally init'd with read access for the
group.
This means a relatively non-privileged user can perform a backup of the
cluster without requiring write privileges, which enhances security.
The mode of PGDATA is used to determine whether group permissions are
enabled for directory and file creates. This method was chosen as it's
simple and works well for the various utilities that write into PGDATA.
Changing the mode of PGDATA manually will not automatically change the
mode of all the files contained therein. If the user would like to
enable group access on an existing cluster then changing the mode of all
the existing files will be required. Note that pg_upgrade will
automatically change the mode of all migrated files if the new cluster
is init'd with the -g option.
Tests are included for the backend and all the utilities which operate
on the PG data directory to ensure that the correct mode is set based on
the data directory permissions.
Author: David Steele <david@pgmasters.net>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
Consolidate directory and file create permissions for tools which work
with the PG data directory by adding a new module (common/file_perm.c)
that contains variables (pg_file_create_mode, pg_dir_create_mode) and
constants to initialize them (0600 for files and 0700 for directories).
Convert mkdir() calls in the backend to MakePGDirectory() if the
original call used default permissions (always the case for regular PG
directories).
Add tests to make sure permissions in PGDATA are set correctly by the
tools which modify the PG data directory.
Authors: David Steele <david@pgmasters.net>,
Adam Brightwell <adam.brightwell@crunchydata.com>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
The new unlogged_reinit recovery tests create a new tablespace using
TestLib.pm's tempdir. However, on msys that function returns a virtual
path that isn't understood by Postgres. Here we add a new function to
TestLib.pm to turn such a path into a real path on the underlying file
system, and use it in the new test to create the tablespace. The new
function is essentially a NOOP everywhere but msys.
Add a function to TestLib that allows us to check pg_config.h and then
decide the expected test outcome based on that.
Author: Michael Paquier <michael.paquier@gmail.com>
Various Perl scripts we use to generate files were in the habit of
printing things like "generated by $0" into their output files.
That looks like a fine idea at first glance, but it results in
non-reproducible output, because in VPATH builds $0 won't be just
the name of the script file, but a full path for it. We'd prefer
that you get identical results whether using VPATH or not, so this
is a bad thing.
Some of these places also printed their input file name(s), causing
an additional hazard of the same type.
Hence, establish a policy that thou shalt not print $0, nor input file
pathnames, into output files (they're still allowed in error messages,
though). Instead just write the script name verbatim. While we are at
it, we can make these annotations more useful by giving the script's
full relative path name within the PG source tree, eg instead of
Gen_fmgrtab.pl let's print src/backend/utils/Gen_fmgrtab.pl.
Not all of the changes made here actually affect any files shipped
in finished tarballs today, but it seems best to apply the policy
everyplace so that nobody copies unsafe code into places where it
could matter.
Christoph Berg and Tom Lane
Discussion: https://postgr.es/m/20171215102223.GB31812@msg.df7cb.de
Don't write to stdin of a psql process that could have already exited
with an authentication failure. Buildfarm members crake and mandrill
have failed once by doing so. Ignore SIGPIPE in all TAP tests.
Back-patch to v10, where these tests were introduced.
Reviewed by Michael Paquier.
Discussion: https://postgr.es/m/20171209210203.GC3362632@rfd.leadboat.com
* Remove no-such-user test case, output isn't stable, and we really
don't need to be testing such cases here anyway.
* Fix the process exit code test logic to match PostgresNode::psql
(but I didn't bother with looking at the "core" flag).
* Give up on inf/nan tests.
Per buildfarm.
When output of IPC::Run::run () is redirected to scalar references, in
certain circumstances the Msys perl does not correctly detect that the
end of file has been seen, making the test hang indefinitely. One such
circumstance is when the command is 'pg_ctl start', and such a change
was made in commit f13ea95f9e. The workaround, which only applies on
MSys, is to redirect the output to temporary files and then read them in
when the process has finished.
Patch by me, reviewed and tweaked by Tom Lane.
Fix all perlcritic warnings of severity level 5, except in
src/backend/utils/Gen_dummy_probes.pl, which is automatically generated.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Before pg_regress runs psql, set the application name to the test name.
Similarly, set the application name to the test file name in the TAP
tests. Also, set a default log_line_prefix that show the application
name, as well as the PID and a time stamp.
That way, the server log output can be correlated to the test input
files, making debugging a bit easier.
Add tests for consistent support of connection strings in frontend
programs as well as proper handling of unusual characters in database
and user names. These tests were developed for the issues of
CVE-2016-5424.
To allow testing of names with spaces, change the pg_regress
command-line options --create-role and --dbname to split their arguments
by comma only, not space or comma as before. Only commas were actually
used in existing uses.
Noah Misch, Michael Paquier, Peter Eisentraut
Consistently print the test name, not the full command, which can be
quite lenghty and include temporary directory names and other
distracting details.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
This makes it easier to relate the temporary data dirs to each node in
a test script.
Author: Kyotaro Horiguchi
Reviewed-By: Craig Ringer, Alvaro Herrera
Commit 7132810c (Retain tempdirs for failed tests) used Test::More's
is_passing method, but that was added in Test::More 0.89_01 which is
sometime later than Perl 5.10.1. Popular platforms such as RHEL6 don't
have that, nevermind some of our older dinosaurs. Do it the hard way.
Michael Paquier, based on research by Craig Ringer
For unclear reasons, this function doesn't always read the expected data
in some old Perl versions. Rewriting it to avoid use of ARGV seems to
dodge the problem, and this version is clearer anyway if you ask me.
In passing, also improve error message in adjacent append_to_file function.
This way, existing .gitignore entries and makefile clean actions will
automatically apply to the tempdir, should it survive a TAP test run
(which can happen if the user control-C's out of the run, for example).
Michael Paquier, per a complaint from me
The original code was a bit clunky; make it more amenable for further
reuse by creating a new Perl package PostgresNode, which is an
object-oriented representation of a single server, with some support
routines such as init, start, stop, psql. This serves as a better basis
on which to build further test code, and enables writing tests that use
more than one server without too much complication.
This commit modifies a lot of the existing test files, mostly to remove
explicit calls to system commands (pg_ctl) replacing them with method
calls of a PostgresNode object. The result is quite a bit more
straightforward.
Also move some initialization code to BEGIN and INIT blocks instead of
having it straight in as top-level code.
This commit also introduces package RecursiveCopy so that we can copy
whole directories without having to depend on packages that may not be
present on vanilla Perl 5.8 installations.
I also ran perltidy on the modified files, which changes some code sites
that are not otherwise touched by this patch. I tried to avoid this,
but it ended up being more trouble than it's worth.
Authors: Michael Paquier, Álvaro Herrera
Review: Noah Misch
Most suites already did so via start_test_server(), but the pg_rewind,
pg_ctl and pg_controldata suites ran a postmaster or initdb with fsync
enabled. This halves the pg_rewind suite's runtime on buildfarm member
tern. It makes tern and that machine's other buildfarm members less
vulnerable to noise failures from postmaster startup overrunning the 60s
pg_ctl timeout. Back-patch to 9.5, where pg_rewind was introduced.
The Msys DTK perl, which is required to run TAP tests under Msys as a
native perl won't recognize the correct virtual paths, has its osname
recorded in the Config module as 'msys' instead of 'MSWin32'. To avoid
having to repeat the test a variable is created that is true iff the
osname is either of these values, and is then used everywhere that
matters.
On Windows, use listen_address=127.0.0.1 to allow TCP connections. We were
already using "pg_regress --config-auth" to set up HBA appropriately. The
standard_initdb helper function now sets up the server's
unix_socket_directories or listen_addresses in the config file, so that
they don't need to be specified in the pg_ctl command line anymore. That
way, the pg_ctl invocations in test programs don't need to differ between
Windows and Unix.
Add another helper function to configure the server's pg_hba.conf to allow
replication connections. The configuration is done similarly to "pg_regress
--config-auth": trust on domain sockets on Unix, and SSPI authentication on
Windows.
Replace calls to "cat" and "touch" programs with built-in perl code, as
those programs don't normally exist on Windows.
Add instructions in the docs on how to install IPC::Run on Windows. Adjust
vcregress.pl to not replace PERL5LIB completely in vcregress.pl, because
otherwise cannot install IPC::Run in a non-standard location easily.
Michael Paquier, reviewed by Noah Misch, some additional tweaking by me.
This option specifies a replication slot for WAL streaming (-X stream),
so that there can be continuous replication slot use between WAL
streaming during the base backup and the start of regular streaming
replication.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
