Provides for better code readability, but mainly this is infrastructure changes
to allow further changes such as arbitrary footers on printed tables. Also,
the translation status of each element in the table is more easily customized.
Brendan Jurd, with some editorialization by me.
psql's \d commands and other uses of printQuery(). Previously we would pass
these strings through gettext() and then send them to the server as literals
in the SQL query. But the code was not set up to handle doubling of quotes in
the strings, causing failure if a translation attempted to use the wrong kind
of quote marks, as indeed is now the case for (at least) the French
translation of \dFp. Another hazard was that gettext() would translate to
whatever encoding was implied by the client's LC_CTYPE setting, which might be
different from the client_encoding setting, which would probably cause the
server to reject the query as mis-encoded. The new arrangement is to send the
untranslated ASCII strings to the server, and do the translations inside
printQuery() after the query results come back. Per report from Guillaume
Lelarge and subsequent discussion.
Oleg Bartunov and Teodor Sigaev, but I did a lot of editorializing,
so anything that's broken is probably my fault.
Documentation is nonexistent as yet, but let's land the patch so we can
get some portability testing done.
named pg_toast_temp_nnn, alongside the pg_temp_nnn schemas used for the temp
tables themselves. This allows low-level code such as the relcache to
recognize that these tables are indeed temporary, which enables various
optimizations such as not WAL-logging changes and using local rather than
shared buffers for access. Aside from obvious performance benefits, this
provides a solution to bug #3483, in which other backends unexpectedly held
open file references to temporary tables. The scheme preserves the property
that TOAST tables are not in any schema that's normally in the search path,
so they don't conflict with user table names.
initdb forced because of changes in system view definitions.
rules to be defined with different, per session controllable, behaviors
for replication purposes.
This will allow replication systems like Slony-I and, as has been stated
on pgsql-hackers, other products to control the firing mechanism of
triggers and rewrite rules without modifying the system catalog directly.
The firing mechanisms are controlled by a new superuser-only GUC
variable, session_replication_role, together with a change to
pg_trigger.tgenabled and a new column pg_rewrite.ev_enabled. Both
columns are a single char data type now (tgenabled was a bool before).
The possible values in these attributes are:
'O' - Trigger/Rule fires when session_replication_role is "origin"
(default) or "local". This is the default behavior.
'D' - Trigger/Rule is disabled and fires never
'A' - Trigger/Rule fires always regardless of the setting of
session_replication_role
'R' - Trigger/Rule fires when session_replication_role is "replica"
The GUC variable can only be changed as long as the system does not have
any cached query plans. This will prevent changing the session role and
accidentally executing stored procedures or functions that have plans
cached that expand to the wrong query set due to differences in the rule
firing semantics.
The SQL syntax for changing a triggers/rules firing semantics is
ALTER TABLE <tabname> <when> TRIGGER|RULE <name>;
<when> ::= ENABLE | ENABLE ALWAYS | ENABLE REPLICA | DISABLE
psql's \d command as well as pg_dump are extended in a backward
compatible fashion.
Jan
equality checks it applies, instead of a random dependence on whatever
operators might be named "=". The equality operators will now be selected
from the opfamily of the unique index that the FK constraint depends on to
enforce uniqueness of the referenced columns; therefore they are certain to be
consistent with that index's notion of equality. Among other things this
should fix the problem noted awhile back that pg_dump may fail for foreign-key
constraints on user-defined types when the required operators aren't in the
search path. This also means that the former warning condition about "foreign
key constraint will require costly sequential scans" is gone: if the
comparison condition isn't indexable then we'll reject the constraint
entirely. All per past discussions.
Along the way, make the RI triggers look into pg_constraint for their
information, instead of using pg_trigger.tgargs; and get rid of the always
error-prone fixed-size string buffers in ri_triggers.c in favor of building up
the RI queries in StringInfo buffers.
initdb forced due to columns added to pg_constraint and pg_trigger.
pg_dump as well as psql. Since psql already uses dumputils.c, while there's
not any code sharing in the other direction, this seems the easiest way.
Also, fix misinterpretation of patterns using regex | by adding parentheses
(same bug found previously in similar_escape()). This should be backpatched.
quote chars inside quote marks, should emit one quote *and stay in inquotes
mode*. No doubt the lack of reports of this have something to do with the
poor documentation of the feature ...
existing for backend GUC variables, and use this to eliminate repeated
fetching/parsing of psql variables in psql's inner loops. In a trivial
test with lots of 'select 1;' commands, psql's CPU time went down almost
10%, although of course the effect on total elapsed time was much less.
Per discussion about how to ensure the upcoming FETCH_COUNT patch doesn't
cost any performance when not being used.
the opportunity to treat COUNT(*) as a zero-argument aggregate instead
of the old hack that equated it to COUNT(1); this is materially cleaner
(no more weird ANYOID cases) and ought to be at least a tiny bit faster.
Original patch by Sergey Koposov; review, documentation, simple regression
tests, pg_dump and psql support by moi.
places --- that risks corrupting data structures, losing sync with the
backend, etc. We now longjmp only from calls to readline, fgets, and
fread, which we assume are coded to protect themselves against interrupts
at undesirable times. This requires adding explicit tests for
cancel_pressed in long-running loops, but on the whole it's far cleaner.
Martijn van Oosterhout and Tom Lane.
and there's only one place that's a kluge, ie, appendStringLiteralConn.
Note that pg_dump itself doesn't use appendStringLiteralConn, so its
behavior is not affected; only the other utility programs care.
o turns off escape_string_warning in pg_dumpall.c
o optionally use E'' for \password (undocumented option?)
o honor standard_conforming-strings for \copy (but not
support literal E'' strings)
o optionally use E'' for \d commands
o turn off escape_string_warning for createdb, createuser,
droplang
and standard_conforming_strings; likewise for the other client programs
that need it. As per previous discussion, a pg_dump dump now conforms
to the standard_conforming_strings setting of the source database.
We don't use E'' syntax in the dump, thereby improving portability of
the SQL. I added a SET escape_strings_warning = off command to keep
the dumps from getting a lot of back-chatter from that.
'off'. This allows pg_dump output with standard_conforming_strings =
'on' to generate proper strings that can be loaded into other databases
without the backslash doubling we typically do. I have added the
dumping of the standard_conforming_strings value to pg_dump.
I also added standard backslash handling for plpgsql.
> True, but they're not being used where you'd expect. This seems to be
> something to do with the fact that it's not pg_authid which is being
> accessed, but rather the view pg_roles.
I looked into this and it seems the problem is that the view doesn't
get flattened into the main query because of the has_nullable_targetlist
limitation in prepjointree.c. That's triggered because pg_roles has
'********'::text AS rolpassword
which isn't nullable, meaning it would produce wrong behavior if
referenced above the outer join.
Ultimately, the reason this is a problem is that the planner deals only
in simple Vars while processing joins; it doesn't want to think about
expressions. I'm starting to think that it may be time to fix this,
because I've run into several related restrictions lately, but it seems
like a nontrivial project.
In the meantime, reducing the LEFT JOIN to pg_roles to a JOIN as per
Peter's suggestion seems like the best short-term workaround.
comments on cluster global objects like databases, tablespaces, and
roles.
It touches a lot of places, but not much in the way of big changes. The
only design decision I made was to duplicate the query and manipulation
functions rather than to try and have them handle both shared and local
comments. I believe this is simpler for the code and not an issue for
callers because they know what type of object they are dealing with.
This has resulted in a shobj_description function analagous to
obj_description and backend functions [Create/Delete]SharedComments
mirroring the existing [Create/Delete]Comments functions.
pg_shdescription.h goes into src/include/catalog/
Kris Jurka
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
argument as a 'regclass' value instead of a text string. The frontend
conversion of text string to pg_class OID is now encapsulated as an
implicitly-invocable coercion from text to regclass. This provides
backwards compatibility to the old behavior when the sequence argument
is explicitly typed as 'text'. When the argument is just an unadorned
literal string, it will be taken as 'regclass', which means that the
stored representation will be an OID. This solves longstanding problems
with renaming sequences that are referenced in default expressions, as
well as new-in-8.1 problems with renaming such sequences' schemas or
moving them to another schema. All per recent discussion.
Along the way, fix some rather serious problems in dbmirror's support
for mirroring sequence operations (int4 vs int8 confusion for instance).
