Previously, this prevented promoted standby servers from being upgraded
because of a missing WAL history file. (Timeline 1 doesn't need a
history file, and we don't copy WAL files anyway.)
Report by Christian Echerer(?), Alexey Klyukin
Backpatch through 9.0
This patch causes pg_upgrade to error out during its check phase if:
(1) template0 is marked connectable
or
(2) any other database is marked non-connectable
This is done because, in the first case, pg_upgrade would fail because
the pg_dumpall --globals restore would fail, and in the second case, the
database would not be restored, leading to data loss.
Report by Matt Landry (1), Stephen Frost (2)
Backpatch through 9.0
DST law changes in Egypt, Mongolia, Palestine.
Historical corrections for Canada and Chile.
Revised zone abbreviation for America/Adak (HST/HDT not HAST/HADT).
Commit 81c45081 introduced a new RBM_ZERO_AND_LOCK mode to ReadBuffer, which
takes a lock on the buffer before zeroing it. However, you cannot take a
lock on a local buffer, and you got a segfault instead. The version of that
patch committed to master included a check for !isLocalBuf, and therefore
didn't crash, but oddly I missed that in the back-patched versions. This
patch adds that check to the back-branches too.
RBM_ZERO_AND_LOCK mode is only used during WAL replay, and in hash indexes.
WAL replay only deals with shared buffers, so the only way to trigger the
bug is with a temporary hash index.
Reported by Artem Ignatyev, analysis by Tom Lane.
If a row that potentially violates a deferred exclusion constraint is
HOT-updated later in the same transaction, the exclusion constraint would
be reported as violated when the check finally occurs, even if the row(s)
the new row originally conflicted with have since been removed. This
happened because the wrong TID was passed to check_exclusion_constraint(),
causing the live HOT-updated row to be seen as a conflicting row rather
than recognized as the row-under-test.
Per bug #13148 from Evan Martin. It's been broken since exclusion
constraints were invented, so back-patch to all supported branches.
As discussed, the default setting of include_realm=0 can be dangerous in
multi-realm environments because it is then impossible to differentiate
users with the same username but who are from two different realms.
Recommend include_realm=1 and note that the default setting may change
in a future version of PostgreSQL and therefore users may wish to
explicitly set include_realm to avoid issues while upgrading.
The Service Control Manager should be notified regularly during a shutdown
that takes a long time. Previously we would increaes the counter, but forgot
to actually send the notification to the system. The loop counter was also
incorrectly initalized in the event that the startup of the system took long
enough for it to increase, which could cause the shutdown process not to wait
as long as expected.
Krystian Bigaj, reviewed by Michael Paquier
These functions should return SETOF TEXT[], like the core functions they
are wrappers for; but they were incorrectly declared as returning just
TEXT[]. This mistake had two results: first, if there was no match you got
a scalar null result, whereas what you should get is an empty set (zero
rows). Second, the 'g' flag was effectively ignored, since you would get
only one result array even if there were multiple matches, as reported by
Jeff Certain.
While ignoring 'g' is a clear bug, the behavior for no matches might well
have been thought to be the intended behavior by people who hadn't compared
it carefully to the core regexp_matches() functions. So we should tread
carefully about introducing this change in the back branches. Still, it
clearly is a bug and so providing some fix is desirable.
After discussion, the conclusion was to introduce the change in a 1.1
version of the citext extension (as we would need to do anyway); 1.0 still
contains the incorrect behavior. 1.1 is the default and only available
version in HEAD, but it is optional in the back branches, where 1.0 remains
the default version. People wishing to adopt the fix in back branches will
need to explicitly do ALTER EXTENSION citext UPDATE TO '1.1'. (I also
provided a downgrade script in the back branches, so people could go back
to 1.0 if necessary.)
This should be called out as an incompatible change in the 9.5 release
notes, although we'll also document it in the next set of back-branch
release notes. The notes should mention that any views or rules that use
citext's regexp_matches() functions will need to be dropped before
upgrading to 1.1, and then recreated again afterwards.
Back-patch to 9.1. The bug goes all the way back to citext's introduction
in 8.4, but pre-9.1 there is no extension mechanism with which to manage
the change. Given the lack of previous complaints it seems unnecessary to
change this behavior in 9.0, anyway.
pg_win32_is_junction() was a typo for pgwin32_is_junction(). open()
was used not only in a two-argument form, which breaks on Windows,
but also where BasicOpenFile() should have been used.
Per reports from Andrew Dunstan and David Rowley.
Otherwise, if there's another crash, some writes from after the first
crash might make it to disk while writes from before the crash fail
to make it to disk. This could lead to data corruption.
Back-patch to all supported versions.
Abhijit Menon-Sen, reviewed by Andres Freund and slightly revised
by me.
An outer join appearing within the RHS of an antijoin can't commute with
the antijoin, but somehow I missed teaching make_outerjoininfo() about
that. In Teodor Sigaev's recent trouble report, this manifests as a
"could not find RelOptInfo for given relids" error within eqjoinsel();
but I think silently wrong query results are possible too, if the planner
misorders the joins and doesn't happen to trigger any internal consistency
checks. It's broken as far back as we had antijoins, so back-patch to all
supported branches.
Each of the libraries incorporates src/port files, which often check
FRONTEND. Build systems disagreed on whether to build libpgtypes this
way. Only libecpg incorporates files that rely on it today. Back-patch
to 9.0 (all supported versions) to forestall surprises.
The cross-reference to set_append_rel_pathlist() was obsoleted by
commit e2fa76d80b, which split what
had been set_rel_pathlist() and child routines into two sets of
functions. But I (tgl) evidently missed updating this comment.
Back-patch to 9.2 to avoid unnecessary divergence among branches.
Amit Langote
When the startup process recovers transactions by scanning pg_twophase
directory, it should clear MyLockedGxact after it's done processing each
transaction. Like we do during normal operation, at PREPARE TRANSACTION.
Otherwise, if the startup process exits due to an error, it will try to
clear the locking_backend field of the last recovered transaction. That's
usually harmless, but if the error happens in MarkAsPreparing, while
holding TwoPhaseStateLock, the shmem-exit hook will try to acquire
TwoPhaseStateLock again, and deadlock with itself.
This fixes bug #13128 reported by Grant McAlister. The bug was introduced
by commit bb38fb0d, so backpatch to all supported versions like that
commit.
SLRU_SEGMENTS_PER_PAGE -> SLRU_PAGES_PER_SEGMENT
I introduced this ancient typo in subtrans.c and later propagated it to
multixact.c. I fixed the latter in f741300c, but only back to 9.3;
backpatch to all supported branches for consistency.
After a timeline switch, we would leave behind recycled WAL segments that
are in the future, but on the old timeline. After promotion, and after they
become old enough to be recycled again, we would notice that they don't have
a .ready or .done file, create a .ready file for them, and archive them.
That's bogus, because the files contain garbage, recycled from an older
timeline (or prealloced as zeros). We shouldn't archive such files.
This could happen when we're following a timeline switch during replay, or
when we switch to new timeline at end-of-recovery.
To fix, whenever we switch to a new timeline, scan the data directory for
WAL segments on the old timeline, but with a higher segment number, and
remove them. Those don't belong to our timeline history, and are most
likely bogus recycled or preallocated files. They could also be valid files
that we streamed from the primary ahead of time, but in any case, they're
not needed to recover to the new timeline.
It was previously possible to have the launcher re-execute its main loop
before shutting down if some other signal was received or an error
occurred after getting SIGTERM, as reported by Qingqing Zhou.
While investigating, Tom Lane further noticed that if autovacuum had
been disabled in the config file, it would misbehave by trying to start
a new worker instead of bailing out immediately -- it would consider
itself as invoked in emergency mode.
Fix both problems by checking the shutdown flag in a few more places.
These problems have existed since autovacuum was introduced, so
backpatch all the way back.
While gcc doesn't complain if you declare a function "static" and then
define it not-static, other compilers do; and in any case the code is
highly misleading this way. Add the missing "static" keywords to a
couple of recent patches. Per buildfarm member pademelon.
Previously we would re-use input subexpressions in all expression trees
attached to a Join plan node. However, if it's an outer join and the
subexpression appears in the nullable-side input, this is potentially
incorrect for apparently-matching subexpressions that came from above
the outer join (ie, targetlist and qpqual expressions), because the
executor will treat the subexpression value as NULL when maybe it should
not be.
The case is fairly hard to hit because (a) you need a non-strict
subexpression (else NULL is correct), and (b) we don't usually compute
expressions in the outputs of non-toplevel plan nodes. But we might do
so if the expressions are sort keys for a mergejoin, for example.
Probably in the long run we should make a more explicit distinction between
Vars appearing above and below an outer join, but that will be a major
planner redesign and not at all back-patchable. For the moment, just hack
set_join_references so that it will not match any non-Var expressions
coming from nullable inputs to expressions that came from above the join.
(This is somewhat overkill, in that a strict expression could still be
matched, but it doesn't seem worth the effort to check that.)
Per report from Qingqing Zhou. The added regression test case is based
on his example.
This has been broken for a very long time, so back-patch to all active
branches.
Commit ed9cc2b5df made it unnecessary to pass
start_nblkno to _hash_splitbucket(), and for that matter unnecessary to
have the internal nblkno variable either. My compiler didn't complain
about that, but some did. I also rearranged the use of oblkno a bit to
make that case more parallel.
Report and initial patch by Petr Jelinek, rearranged a bit by me.
Back-patch to all branches, like the previous patch.
psql was already accepting conninfo strings as the first parameter in
\connect, but the way it worked wasn't sane; some of the other
parameters would get the previous connection's values, causing it to
connect to a completely unexpected server or, more likely, not finding
any server at all because of completely wrong combinations of
parameters.
Fix by explicitely checking for a conninfo-looking parameter in the
dbname position; if one is found, use its complete specification rather
than mix with the other arguments. Also, change tab-completion to not
try to complete conninfo/URI-looking "dbnames" and document that
conninfos are accepted as first argument.
There was a weak consensus to backpatch this, because while the behavior
of using the dbname as a conninfo is nowhere documented for \connect, it
is reasonable to expect that it works because it does work in many other
contexts. Therefore this is backpatched all the way back to 9.0.
To implement this, routines previously private to libpq have been
duplicated so that psql can decide what looks like a conninfo/URI
string. In back branches, just duplicate the same code all the way back
to 9.2, where URIs where introduced; 9.0 and 9.1 have a simpler version.
In master, the routines are moved to src/common and renamed.
Author: David Fetter, Andrew Dunstan. Some editorialization by me
(probably earning a Gierth's "Sloppy" badge in the process.)
Reviewers: Andrew Gierth, Erik Rijkers, Pavel Stěhule, Stephen Frost,
Robert Haas, Andrew Dunstan.
You're required to write either RANGE or ROWS to start a frame clause,
but the documentation incorrectly implied this is optional. Noted by
David Johnston.
As with initdb these programs need to run with a restricted token, and
if they don't pg_upgrade will fail when run as a user with Adminstrator
privileges.
Backpatch to all live branches. On the development branch the code is
reorganized so that the restricted token code is now in a single
location. On the stable bramches a less invasive change is made by
simply copying the relevant code to pg_upgrade.c and pg_resetxlog.c.
Patches and bug report from Muhammad Asif Naeem, reviewed by Michael
Paquier, slightly edited by me.
_hash_splitbucket() obtained the base page of the new bucket by calling
_hash_getnewbuf(), but it held no exclusive lock that would prevent some
other process from calling _hash_getnewbuf() at the same time. This is
contrary to _hash_getnewbuf()'s API spec and could in fact cause failures.
In practice, we must only call that function while holding write lock on
the hash index's metapage.
An additional problem was that we'd already modified the metapage's bucket
mapping data, meaning that failure to extend the index would leave us with
a corrupt index.
Fix both issues by moving the _hash_getnewbuf() call to just before we
modify the metapage in _hash_expandtable().
Unfortunately there's still a large problem here, which is that we could
also incur ENOSPC while trying to get an overflow page for the new bucket.
That would leave the index corrupt in a more subtle way, namely that some
index tuples that should be in the new bucket might still be in the old
one. Fixing that seems substantially more difficult; even preallocating as
many pages as we could possibly need wouldn't entirely guarantee that the
bucket split would complete successfully. So for today let's just deal
with the base case.
Per report from Antonin Houska. Back-patch to all active branches.
Slow functions in index expressions might cause this loop to take long
enough to make it worth being cancellable. Probably it would be enough
to call CHECK_FOR_INTERRUPTS here, but for consistency with other
per-sample-row loops in this file, let's use vacuum_delay_point.
Report and patch by Jeff Janes. Back-patch to all supported branches.
ExecOpenScanRelation assumed that any relation listed in the ExecRowMark
list has been locked by InitPlan; but this is not true if the rel's
markType is ROW_MARK_COPY, which is possible if it's a foreign table.
In most (possibly all) cases, failure to acquire a lock here isn't really
problematic because the parser, planner, or plancache would have taken the
appropriate lock already. In principle though it might leave us vulnerable
to working with a relation that we hold no lock on, and in any case if the
executor isn't depending on previously-taken locks otherwise then it should
not do so for ROW_MARK_COPY relations.
Noted by Etsuro Fujita. Back-patch to all active versions, since the
inconsistency has been there a long time. (It's almost certainly
irrelevant in 9.0, since that predates foreign tables, but the code's
still wrong on its own terms.)
It's all very well to claim that a simplistic sort is fast in easy
cases, but O(N^2) in the worst case is not good ... especially if the
worst case is as easy to hit as "descending order input". Replace that
bit with our standard qsort.
Per bug #12866 from Maksym Boguk. Back-patch to all active branches.
GNU readline defines the return value of write_history() as "zero if OK,
else an errno code". libedit's version of that function used to have a
different definition (to wit, "-1 if error, else the number of lines
written to the file"). We tried to work around that by checking whether
errno had become nonzero, but this method has never been kosher according
to the published API of either library. It's reportedly completely broken
in recent Ubuntu releases: psql bleats about "No such file or directory"
when saving ~/.psql_history, even though the write worked fine.
However, libedit has been following the readline definition since somewhere
around 2006, so it seems all right to finally break compatibility with
ancient libedit releases and trust that the return value is what readline
specifies. (I'm not sure when the various Linux distributions incorporated
this fix, but I did find that OS X has been shipping fixed versions since
10.5/Leopard.)
If anyone is still using such an ancient libedit, they will find that psql
complains it can't write ~/.psql_history at exit, even when the file was
written correctly. This is no worse than the behavior we're fixing for
current releases.
Back-patch to all supported branches.
The message tries to tell the replication apply delay which fails if
the first WAL record is not applied yet. Fix is, instead of telling
overflowed minus numeric, showing "N/A" which indicates that the delay
data is not yet available. Problem reported by me and patch by
Fabrízio de Royes Mello.
Back patched to 9.4, 9.3 and 9.2 stable branches (9.1 and 9.0 do not
have the debug message).
The ROW_MARK_COPY path in EvalPlanQualFetchRowMarks() was just setting
tableoid to InvalidOid, I think on the assumption that the referenced
RTE must be a subquery or other case without a meaningful OID. However,
foreign tables also use this code path, and they do have meaningful
table OIDs; so failure to set the tuple field can lead to user-visible
misbehavior. Fix that by fetching the appropriate OID from the range
table.
There's still an issue about whether CTID can ever have a meaningful
value in this case; at least with postgres_fdw foreign tables, it does.
But that is a different problem that seems to require a significantly
different patch --- it's debatable whether postgres_fdw really wants to
use this code path at all.
Simplified version of a patch by Etsuro Fujita, who also noted the
problem to begin with. The issue can be demonstrated in all versions
having FDWs, so back-patch to 9.1.
The SGML docs claimed that 1-byte integers could be sent or received with
the "isint" options, but no such behavior has ever been implemented in
pqGetInt() or pqPutInt(). The in-code documentation header for PQfn() was
even less in tune with reality, and the code itself used parameter names
matching neither the SGML docs nor its libpq-fe.h declaration. Do a bit
of additional wordsmithing on the SGML docs while at it.
Since the business about 1-byte integers is a clear documentation bug,
back-patch to all supported branches.
We were using "user mapping for user XYZ" as description for user mappings, but
that's ambiguous because users can have mappings on multiple foreign
servers; therefore change it to "for user XYZ on server UVW" instead.
Object identities for user mappings are also updated in the same way, in
branches 9.3 and above.
The incomplete description string was introduced together with the whole
SQL/MED infrastructure by commit cae565e503 of 8.4 era, so backpatch all
the way back.
Since 9.1, we've provided extensions with a way to denote
"configuration" tables- tables created by an extension which the user
may modify. By marking these as "configuration" tables, the extension
is asking for the data in these tables to be pg_dump'd (tables which
are not marked in this way are assumed to be entirely handled during
CREATE EXTENSION and are not included at all in a pg_dump).
Unfortunately, pg_dump neglected to consider foreign key relationships
between extension configuration tables and therefore could end up
trying to reload the data in an order which would cause FK violations.
This patch teaches pg_dump about these dependencies, so that the data
dumped out is done so in the best order possible. Note that there's no
way to handle circular dependencies, but those have yet to be seen in
the wild.
The release notes for this should include a caution to users that
existing pg_dump-based backups may be invalid due to this issue. The
data is all there, but restoring from it will require extracting the
data for the configuration tables and then loading them in the correct
order by hand.
Discussed initially back in bug #6738, more recently brought up by
Gilles Darold, who provided an initial patch which was further reworked
by Michael Paquier. Further modifications and documentation updates
by me.
Back-patch to 9.1 where we added the concept of extension configuration
tables.
When the library already exists in the build directory, "ar" preserves
members not named on its command line. This mattered when, for example,
a "configure" rerun dropped a file from $(LIBOBJS). libpgport carried
the obsolete member until "make clean". Back-patch to 9.0 (all
supported versions).
Part of the intent of the parameterized-path mechanism was to handle
star-schema queries efficiently, but some overly-restrictive search
limiting logic added in commit e2fa76d80b
prevented such cases from working as desired. Fix that and add a
regression test about it. Per gripe from Marc Cousin.
This is arguably a bug rather than a new feature, so back-patch to 9.2
where parameterized paths were introduced.
Up to now RecordTransactionCommit() waited for WAL to be flushed (if
synchronous_commit != off) and to be synchronously replicated (if
enabled), even if a transaction did not have a xid assigned. The primary
reason for that is that sequence's nextval() did not assign a xid, but
are worthwhile to wait for on commit.
This can be problematic because sometimes read only transactions do
write WAL, e.g. HOT page prune records. That then could lead to read only
transactions having to wait during commit. Not something people expect
in a read only transaction.
This lead to such strange symptoms as backends being seemingly stuck
during connection establishment when all synchronous replicas are
down. Especially annoying when said stuck connection is the standby
trying to reconnect to allow syncrep again...
This behavior also is involved in a rather complicated <= 9.4 bug where
the transaction started by catchup interrupt processing waited for
syncrep using latches, but didn't get the wakeup because it was already
running inside the same overloaded signal handler. Fix the issue here
doesn't properly solve that issue, merely papers over the problems. In
9.5 catchup interrupts aren't processed out of signal handlers anymore.
To fix all this, make nextval() acquire a top level xid, and only wait for
transaction commit if a transaction both acquired a xid and emitted WAL
records. If only a xid has been assigned we don't uselessly want to
wait just because of writes to temporary/unlogged tables; if only WAL
has been written we don't want to wait just because of HOT prunes.
The xid assignment in nextval() is unlikely to cause overhead in
real-world workloads. For one it only happens SEQ_LOG_VALS/32 values
anyway, for another only usage of nextval() without using the result in
an insert or similar is affected.
Discussion: 20150223165359.GF30784@awork2.anarazel.de,
369698E947874884A77849D8FE3680C2@maumau,
5CF4ABBA67674088B3941894E22A0D25@maumau
Per complaint from maumau and Thom Brown
Backpatch all the way back; 9.0 doesn't have syncrep, but it seems
better to be consistent behavior across all maintained branches.
"RETURN SQLERRM" prompted plpgsql_exec_function() to read from freed
memory. Back-patch to 9.0 (all supported versions). Little code ran
between the premature free and the read, so non-assert builds are
unlikely to witness user-visible consequences.
The "simple" path for printing VALUES clauses doesn't work if we need
to attach nondefault column aliases, because there's noplace to do that
in the minimal VALUES() syntax. So modify get_simple_values_rte() to
detect nondefault aliases and treat that as a non-simple case. This
further exposes that the "non-simple" path never actually worked;
it didn't produce valid syntax. Fix that too. Per bug #12789 from
Curtis McEnroe, and analysis by Andrew Gierth.
Back-patch to all supported branches. Before 9.3, this also requires
back-patching the part of commit 092d7ded29
that created get_simple_values_rte() to begin with; inserting the extra
test into the old factorization of that logic would've been too messy.
When LockBufferForCleanup() has to wait for getting a cleanup lock on a
buffer it does so by setting a flag in the buffer header and then wait
for other backends to signal it using ProcWaitForSignal().
Unfortunately LockBufferForCleanup() missed that ProcWaitForSignal() can
return for other reasons than the signal it is hoping for. If such a
spurious signal arrives the wait flags on the buffer header will still
be set. That then triggers "ERROR: multiple backends attempting to wait
for pincount 1".
The fix is simple, unset the flag if still set when retrying. That
implies an additional spinlock acquisition/release, but that's unlikely
to matter given the cost of waiting for a cleanup lock. Alternatively
it'd have been possible to move responsibility for maintaining the
relevant flag to the waiter all together, but that might have had
negative consequences due to possible floods of signals. Besides being
more invasive.
This looks to be a very longstanding bug. The relevant code in
LockBufferForCleanup() hasn't changed materially since its introduction
and ProcWaitForSignal() was documented to return for unrelated reasons
since 8.2. The master only patch series removing ImmediateInterruptOK
made it much easier to hit though, as ProcSendSignal/ProcWaitForSignal
now uses a latch shared with other tasks.
Per discussion with Kevin Grittner, Tom Lane and me.
Backpatch to all supported branches.
Discussion: 11553.1423805224@sss.pgh.pa.us
If libpq output buffer is full, pqSendSome() function tries to drain any
incoming data. This avoids deadlock, if the server e.g. sends a lot of
NOTICE messages, and blocks until we read them. However, pqSendSome() only
did that in blocking mode. In non-blocking mode, the deadlock could still
happen.
To fix, take a two-pronged approach:
1. Change the documentation to instruct that when PQflush() returns 1, you
should wait for both read- and write-ready, and call PQconsumeInput() if it
becomes read-ready. That fixes the deadlock, but applications are not going
to change overnight.
2. In pqSendSome(), drain the input buffer before returning 1. This
alleviates the problem for applications that only wait for write-ready. In
particular, a slow but steady stream of NOTICE messages during COPY FROM
STDIN will no longer cause a deadlock. The risk remains that the server
attempts to send a large burst of data and fills its output buffer, and at
the same time the client also sends enough data to fill its output buffer.
The application will deadlock if it goes to sleep, waiting for the socket
to become write-ready, before the server's data arrives. In practice,
NOTICE messages and such that the server might be sending are usually
short, so it's highly unlikely that the server would fill its output buffer
so quickly.
Backpatch to all supported versions.
