Improve 'pg_internal.init' relcache entry preload mechanism so that it is
safe to use for all system catalogs, and arrange to preload a realistic
set of system-catalog entries instead of only the three nailed-in-cache
indexes that were formerly loaded this way. Fix mechanism for deleting
out-of-date pg_internal.init files: this must be synchronized with transaction
commit, not just done at random times within transactions. Drive it off
relcache invalidation mechanism so that no special-case tests are needed.
Cache additional information in relcache entries for indexes (their pg_index
tuples and index-operator OIDs) to eliminate repeated lookups. Also cache
index opclass info at the per-opclass level to avoid repeated lookups during
relcache load.
Generalize 'systable scan' utilities originally developed by Hiroshi,
move them into genam.c, use in a number of places where there was formerly
ugly code for choosing either heap or index scan. In particular this allows
simplification of the logic that prevents infinite recursion between syscache
and relcache during startup: we can easily switch to heapscans in relcache.c
when and where needed to avoid recursion, so IndexScanOK becomes simpler and
does not need any expensive initialization.
Eliminate useless opening of a heapscan data structure while doing an indexscan
(this saves an mdnblocks call and thus at least one kernel call).
1. If there is exactly one pg_operator entry of the right name and oprkind,
oper() and related routines would return that entry whether its input type
had anything to do with the request or not. This is just premature
optimization: we shouldn't return the single candidate until after we verify
that it really is a valid candidate, ie, is at least coercion-compatible
with the given types.
2. oper() and related routines only promise a coercion-compatible result.
Unfortunately, there were quite a few callers that assumed the returned
operator is binary-compatible with the given datatype; they would proceed
to call it without making any datatype coercions. These callers include
sorting, grouping, aggregation, and VACUUM ANALYZE. In general I think
it is appropriate for these callers to require an exact or binary-compatible
match, so I've added a new routine compatible_oper() that only succeeds if
it can find an operator that doesn't require any run-time conversions.
Callers now call oper() or compatible_oper() depending on whether they are
prepared to deal with type conversion or not.
The upshot of these bugs is revealed by the following silliness in PL/Tcl's
selftest: it creates an operator @< on int4, and then tries to use it to
sort a char(N) column. The system would let it do that :-( (and evidently
has done so since 6.3 :-( :-(). The result in this case was just a silly
sort order, but the reverse combination would've provoked coredump from
trying to dereference integers. With this fix you get more reasonable
behavior:
pltcl_test=# select * from T_pkey1 order by key1, key2 using @<;
ERROR: Unable to identify an operator '@<' for types 'bpchar' and 'bpchar'
You will have to retype this query using an explicit cast
maintained for each cache entry. A cache entry will not be freed until
the matching ReleaseSysCache call has been executed. This eliminates
worries about cache entries getting dropped while still in use. See
my posting to pg-hackers of even date for more info.
Same code exactly as for function resolution.
An obvious example is for
select '1' = '01';
which used to throw an error and which now resolves to two text strings.
key call sites are changed, but most called functions are still oldstyle.
An exception is that the PL managers are updated (so, for example, NULL
handling now behaves as expected in plperl and plpgsql functions).
NOTE initdb is forced due to added column in pg_proc.
In function parsing, try for an actual function of the given name and
input types before trying to interpret the function call as a type
coercion request, rather than after. Before, a function that had the
same name as a type and operated on a binary-compatible type wouldn't
get invoked. Also, cross-pollinate between func_select_candidates and
oper_select_candidates to ensure that they use as nearly the same
resolution rules as possible. A few other minor code cleanups too.
problem could be lack of parentheses. This addresses cases like
X UserOp UserOp Y, which will be parsed as (X UserOp) UserOp Y,
whereas what likely was wanted was X UserOp (UserOp Y).
coercion code. I'm beginning to wonder why we have separate candidate
selection routines for functions, operators, and aggregates --- shouldn't
this code all be unified? But meanwhile,
SELECT 'a' LIKE 'a';
finally works; the code for dealing with unknown input types for operators
was pretty busted.
failures. Fix some outright bugs too, including a reference to
uninitialized memory that would cause failures like this one:
select -('1234567890.1234567'::text);
ERROR: Unable to locate type oid 2139062143 in catalog
Make all system indexes unique.
Make all cache loads use system indexes.
Rename *rel to *relid in inheritance tables.
Rename cache names to be clearer.
additional argument specifying the kind of lock to acquire/release (or
'NoLock' to do no lock processing). Ensure that all relations are locked
with some appropriate lock level before being examined --- this ensures
that relevant shared-inval messages have been processed and should prevent
problems caused by concurrent VACUUM. Fix several bugs having to do with
mismatched increment/decrement of relation ref count and mismatched
heap_open/close (which amounts to the same thing). A bogus ref count on
a relation doesn't matter much *unless* a SI Inval message happens to
arrive at the wrong time, which is probably why we got away with this
sloppiness for so long. Repair missing grab of AccessExclusiveLock in
DROP TABLE, ALTER/RENAME TABLE, etc, as noted by Hiroshi.
Recommend 'make clean all' after pulling this update; I modified the
Relation struct layout slightly.
Will post further discussion to pghackers list shortly.
last loop which would return the *first* surviving-to-that-point candidate
regardless of which one actually passed the test. This was producing
such curious results as 'oid % 2' getting translated to 'int2(oid) % 2'.
match then it tried for a self-commutative operator with the reversed input
data types. This is pretty silly; there could never be such an operator,
except maybe in binary-compatible-type scenarios, and we have oper_inexact
for that. Besides which, the oprsanity regress test would complain about
such an operator. Remove nonfunctional code and simplify routine calling
convention accordingly.
rather than func_select_candidate().
Fix oper_select_candidate() to work with a single operator argument.
Repair left operator checking for null return from candidate list.
no longer returns buffer pointer, can be gotten from scan;
descriptor; bootstrap can create multi-key indexes;
pg_procname index now is multi-key index; oidint2, oidint4, oidname
are gone (must be removed from regression tests); use System Cache
rather than sequential scan in many places; heap_modifytuple no
longer takes buffer parameter; remove unused buffer parameter in
a few other functions; oid8 is not index-able; remove some use of
single-character variable names; cleanup Buffer variables usage
and scan descriptor looping; cleaned up allocation and freeing of
tuples; 18k lines of diff;
Currently force the type to match the _first_ select in the union.
Move oper_select_candidate() from parse_func.c to parse_oper.c.
Throw error inside of oper_inexact() if no match for binary operators.
Check more carefully that types can be coerced
even if there is only one candidate operator in oper_inexact().
Fix up error messages for more uniform look.
Remove unused code.
Fix up comments.
1. Removes the unnecessary "#define AbcRegProcedure 123"'s from
pg_proc.h.
2. Changes those #defines to use the names already defined in
fmgr.h.
3. Forces the make of fmgr.h in backend/Makefile instead of having
it
made as a dependency in access/common/Makefile *hack*hack*hack*
4. Rearranged the #includes to a less helter-skelter arrangement,
also
changing <file.h> to "file.h" to signify a non-system header.
5. Removed "pg_proc.h" from files where its only purpose was for
the
#defines removed in item #1.
6. Added "fmgr.h" to each file changed for completeness sake.
Turns out that #6 was not necessary for some files because fmgr.h
was being included in a roundabout way SIX levels deep by the first
include.
"access/genam.h"
->"access/relscan.h"
->"utils/rel.h"
->"access/strat.h"
->"access/skey.h"
->"fmgr.h"
So adding fmgr.h really didn't add anything to the compile, hopefully
just made it clearer to the programmer.
S Darren.
varchar length.
Cleans up code so attlen is always length.
Removed varchar() hack added earlier.
Will fix bug in selecting varchar() fields, and varchar() can be
variable length.
nodeAgg.c: WARN -> NOTICE for elog
parse_oper.c: was created after patch for fmgr_info, so function call wrong
scan.c: regenerated for i386_solaris using flex 2.5.4
gethostname.c: required prototype for gethostname() function
config.h.in: create prototype for isinfo() function
isinf.c: "fake" isinf() under i386_solaris using fpclass() call...
