This commit standardizes the output format for LSNs to ensure consistent
representation across various tools and messages. Previously, LSNs were
inconsistently printed as `%X/%X` in some contexts, while others used
zero-padding. This often led to confusion when comparing.
To address this, the LSN format is now uniformly set to `%X/%08X`,
ensuring the lower 32-bit part is always zero-padded to eight
hexadecimal digits.
Author: Japin Li <japinli@hotmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/ME0P300MB0445CA53CA0E4B8C1879AF84B641A@ME0P300MB0445.AUSP300.PROD.OUTLOOK.COM
To do this, we must include the wal_level in the first WAL record
covered by each summary file; so add wal_level to struct Checkpoint
and the payload of XLOG_CHECKPOINT_REDO and XLOG_END_OF_RECOVERY.
This, in turn, requires bumping XLOG_PAGE_MAGIC and, since the
Checkpoint is also stored in the control file, also
PG_CONTROL_VERSION. It's not great to do that so late in the release
cycle, but the alternative seems to ship v17 without robust
protections against this scenario, which could result in corrupted
incremental backups.
A side effect of this patch is that, when a server with
wal_level=replica is started with summarize_wal=on for the first time,
summarization will no longer begin with the oldest WAL that still
exists in pg_wal, but rather from the first checkpoint after that.
This change should be harmless, because a WAL summary for a partial
checkpoint cycle can never make an incremental backup possible when
it would otherwise not have been.
Report by Fujii Masao. Patch by me. Review and/or testing by Jakub
Wartak and Fujii Masao.
Discussion: http://postgr.es/m/6e30082e-041b-4e31-9633-95a66de76f5d@oss.nttdata.com
This allows tools that read the WAL sequentially to identify (possible)
redo points when they're reached, rather than only being able to
detect them in retrospect when XLOG_CHECKPOINT_ONLINE is found, possibly
much later in the WAL stream. There are other possible applications as
well; see the discussion links below.
Any redo location that precedes the checkpoint location should now point
to an XLOG_CHECKPOINT_REDO record, so add a cross-check to verify this.
While adjusting the code in CreateCheckPoint() for this patch, I made it
call WALInsertLockAcquireExclusive a bit later than before, since there
appears to be no need for it to be held while checking whether the system
is idle, whether this is an end-of-recovery checkpoint, or what the current
timeline is.
Bump XLOG_PAGE_MAGIC.
Patch by me, based in part on earlier work from Dilip Kumar. Review by
Dilip Kumar, Amit Kapila, Andres Freund, and Michael Paquier.
Discussion: http://postgr.es/m/CA+TgmoYy-Vc6G9QKcAKNksCa29cv__czr+N9X_QCxEfQVpp_8w@mail.gmail.com
Discussion: http://postgr.es/m/20230614194717.jyuw3okxup4cvtbt%40awork3.anarazel.de
Discussion: http://postgr.es/m/CA+hUKG+b2ego8=YNW2Ohe9QmSiReh1-ogrv8V_WZpJTqP3O+2w@mail.gmail.com
There are still some alignment-related failures in the buildfarm,
which might or might not be able to be fixed quickly, but I've also
just realized that it increased the size of many WAL records by 4 bytes
because a block reference contains a RelFileLocator. The effect of that
hasn't been studied or discussed, so revert for now.
RelFileNumbers are now assigned using a separate counter, instead of
being assigned from the OID counter. This counter never wraps around:
if all 2^56 possible RelFileNumbers are used, an internal error
occurs. As the cluster is limited to 2^64 total bytes of WAL, this
limitation should not cause a problem in practice.
If the counter were 64 bits wide rather than 56 bits wide, we would
need to increase the width of the BufferTag, which might adversely
impact buffer lookup performance. Also, this lets us use bigint for
pg_class.relfilenode and other places where these values are exposed
at the SQL level without worrying about overflow.
This should remove the need to keep "tombstone" files around until
the next checkpoint when relations are removed. We do that to keep
RelFileNumbers from being recycled, but now that won't happen
anyway. However, this patch doesn't actually change anything in
this area; it just makes it possible for a future patch to do so.
Dilip Kumar, based on an idea from Andres Freund, who also reviewed
some earlier versions of the patch. Further review and some
wordsmithing by me. Also reviewed at various points by Ashutosh
Sharma, Vignesh C, Amul Sul, Álvaro Herrera, and Tom Lane.
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
In a similar effort to f736e188c and 110d81728, fixup various usages of
string functions where a more appropriate function is available and more
fit for purpose.
These changes include:
1. Use cstring_to_text_with_len() instead of cstring_to_text() when
working with a StringInfoData and the length can easily be obtained.
2. Use appendStringInfoString() instead of appendStringInfo() when no
formatting is required.
3. Use pstrdup(...) instead of psprintf("%s", ...)
4. Use pstrdup(...) instead of psprintf(...) (with no formatting)
5. Use appendPQExpBufferChar() instead of appendPQExpBufferStr() when the
length of the string being appended is 1.
6. appendStringInfoChar() instead of appendStringInfo() when no formatting
is required and string is 1 char long.
7. Use appendPQExpBufferStr(b, .) instead of appendPQExpBuffer(b, "%s", .)
8. Don't use pstrdup when it's fine to just point to the string constant.
I (David) did find other cases of #8 but opted to use #4 instead as I
wasn't certain enough that applying #8 was ok (e.g in hba.c)
Author: Ranier Vilela, David Rowley
Discussion: https://postgr.es/m/CAApHDvo2j2+RJBGhNtUz6BxabWWh2Jx16wMUMWKUjv70Ver1vg@mail.gmail.com
We have been using the term RelFileNode to refer to either (1) the
integer that is used to name the sequence of files for a certain relation
within the directory set aside for that tablespace/database combination;
or (2) that value plus the OIDs of the tablespace and database; or
occasionally (3) the whole series of files created for a relation
based on those values. Using the same name for more than one thing is
confusing.
Replace RelFileNode with RelFileNumber when we're talking about just the
single number, i.e. (1) from above, and with RelFileLocator when we're
talking about all the things that are needed to locate a relation's files
on disk, i.e. (2) from above. In the places where we refer to (3) as
a relfilenode, instead refer to "relation storage".
Since there is a ton of SQL code in the world that knows about
pg_class.relfilenode, don't change the name of that column, or of other
SQL-facing things that derive their name from it.
On the other hand, do adjust closely-related internal terminology. For
example, the structure member names dbNode and spcNode appear to be
derived from the fact that the structure itself was called RelFileNode,
so change those to dbOid and spcOid. Likewise, various variables with
names like rnode and relnode get renamed appropriately, according to
how they're being used in context.
Hopefully, this is clearer than before. It is also preparation for
future patches that intend to widen the relfilenumber fields from its
current width of 32 bits. Variables that store a relfilenumber are now
declared as type RelFileNumber rather than type Oid; right now, these
are the same, but that can now more easily be changed.
Dilip Kumar, per an idea from me. Reviewed also by Andres Freund.
I fixed some whitespace issues, changed a couple of words in a
comment, and made one other minor correction.
Discussion: http://postgr.es/m/CA+TgmoamOtXbVAQf9hWFzonUo6bhhjS6toZQd7HZ-pmojtAmag@mail.gmail.com
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Discussion: http://postgr.es/m/CAFiTN-vTe79M8uDH1yprOU64MNFE+R3ODRuA+JWf27JbhY4hJw@mail.gmail.com
All but a few existing callers assume without checking that this
function succeeds. While it probably will, that's a poor excuse for
not checking. Let's make it return void and instead throw an error
if it doesn't find the block reference. Callers that actually need
to handle the no-such-block case must now use the underlying function
XLogRecGetBlockTagExtended.
In addition to being a bit less error-prone, this should also serve
to suppress some Coverity complaints about XLogRecGetBlockRefInfo.
While at it, clean up some inconsistency about use of the
XLogRecHasBlockRef macro: make XLogRecGetBlockTagExtended use
that instead of open-coding the same condition, and avoid calling
XLogRecHasBlockRef twice in relevant code paths. (That is,
calling XLogRecHasBlockRef followed by XLogRecGetBlockTag is now
deprecated: use XLogRecGetBlockTagExtended instead.)
Patch HEAD only; this doesn't seem to have enough value to consider
a back-branch API break.
Discussion: https://postgr.es/m/425039.1649701221@sss.pgh.pa.us
Physical replication always ships WAL segment files to replicas once
they are complete. This is a problem if one WAL record is split across
a segment boundary and the primary server crashes before writing down
the segment with the next portion of the WAL record: WAL writing after
crash recovery would happily resume at the point where the broken record
started, overwriting that record ... but any standby or backup may have
already received a copy of that segment, and they are not rewinding.
This causes standbys to stop following the primary after the latter
crashes:
LOG: invalid contrecord length 7262 at A8/D9FFFBC8
because the standby is still trying to read the continuation record
(contrecord) for the original long WAL record, but it is not there and
it will never be. A workaround is to stop the replica, delete the WAL
file, and restart it -- at which point a fresh copy is brought over from
the primary. But that's pretty labor intensive, and I bet many users
would just give up and re-clone the standby instead.
A fix for this problem was already attempted in commit 515e3d84a0, but
it only addressed the case for the scenario of WAL archiving, so
streaming replication would still be a problem (as well as other things
such as taking a filesystem-level backup while the server is down after
having crashed), and it had performance scalability problems too; so it
had to be reverted.
This commit fixes the problem using an approach suggested by Andres
Freund, whereby the initial portion(s) of the split-up WAL record are
kept, and a special type of WAL record is written where the contrecord
was lost, so that WAL replay in the replica knows to skip the broken
parts. With this approach, we can continue to stream/archive segment
files as soon as they are complete, and replay of the broken records
will proceed across the crash point without a hitch.
Because a new type of WAL record is added, users should be careful to
upgrade standbys first, primaries later. Otherwise they risk the standby
being unable to start if the primary happens to write such a record.
A new TAP test that exercises this is added, but the portability of it
is yet to be seen.
This has been wrong since the introduction of physical replication, so
backpatch all the way back. In stable branches, keep the new
XLogReaderState members at the end of the struct, to avoid an ABI
break.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Nathan Bossart <bossartn@amazon.com>
Discussion: https://postgr.es/m/202108232252.dh7uxf6oxwcy@alvherre.pgsql
Including Full in variable names duplicates the type information and
leads to overly long names. As FullTransactionId cannot accidentally
be casted to TransactionId that does not seem necessary.
Author: Andres Freund
Discussion: https://postgr.es/m/20200724011143.jccsyvsvymuiqfxu@alap3.anarazel.de
Instead of inferring epoch progress from xids and checkpoints,
introduce a 64 bit FullTransactionId type and use it to track xid
generation. This fixes an unlikely bug where the epoch is reported
incorrectly if the range of active xids wraps around more than once
between checkpoints.
The only user-visible effect of this commit is to correct the epoch
used by txid_current() and txid_status(), also visible with
pg_controldata, in those rare circumstances. It also creates some
basic infrastructure so that later patches can use 64 bit
transaction IDs in more places.
The new type is a struct that we pass by value, as a form of strong
typedef. This prevents the sort of accidental confusion between
TransactionId and FullTransactionId that would be possible if we
were to use a plain old uint64.
Author: Thomas Munro
Reported-by: Amit Kapila
Reviewed-by: Andres Freund, Tom Lane, Heikki Linnakangas
Discussion: https://postgr.es/m/CAA4eK1%2BMv%2Bmb0HFfWM9Srtc6MVe160WFurXV68iAFMcagRZ0dQ%40mail.gmail.com
Since its introduction, max_wal_senders is counted as part of
max_connections when it comes to define how many connection slots can be
used for replication connections with a WAL sender context. This can
lead to confusion for some users, as it could be possible to block a
base backup or replication from happening because other backend sessions
are already taken for other purposes by an application, and
superuser-only connection slots are not a correct solution to handle
that case.
This commit makes max_wal_senders independent of max_connections for its
handling of PGPROC entries in ProcGlobal, meaning that connection slots
for WAL senders are handled using their own free queue, like autovacuum
workers and bgworkers.
One compatibility issue that this change creates is that a standby now
requires to have a value of max_wal_senders at least equal to its
primary. So, if a standby created enforces the value of
max_wal_senders to be lower than that, then this could break failovers.
Normally this should not be an issue though, as any settings of a
standby are inherited from its primary as postgresql.conf gets normally
copied as part of a base backup, so parameters would be consistent.
Author: Alexander Kukushkin
Reviewed-by: Kyotaro Horiguchi, Petr Jelínek, Masahiko Sawada, Oleksii
Kliukin
Discussion: https://postgr.es/m/CAFh8B=nBzHQeYAu0b8fjK-AF1X4+_p6GRtwG+cCgs6Vci2uRuQ@mail.gmail.com
This reverts the backend sides of commit 1fde38beaa.
I have, at least for now, left the pg_verify_checksums tool in place, as
this tool can be very valuable without the rest of the patch as well,
and since it's a read-only tool that only runs when the cluster is down
it should be a lot safer.
This makes it possible to turn checksums on in a live cluster, without
the previous need for dump/reload or logical replication (and to turn it
off).
Enabling checkusm starts a background process in the form of a
launcher/worker combination that goes through the entire database and
recalculates checksums on each and every page. Only when all pages have
been checksummed are they fully enabled in the cluster. Any failure of
the process will revert to checksums off and the process has to be
started.
This adds a new WAL record that indicates the state of checksums, so
the process works across replicated clusters.
Authors: Magnus Hagander and Daniel Gustafsson
Review: Tomas Vondra, Michael Banck, Heikki Linnakangas, Andrey Borodin
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The distinction between "archive" and "hot_standby" existed only because
at the time "hot_standby" was added, there was some uncertainty about
stability. This is now a long time ago. We would like to move forward
with simplifying the replication configuration, but this distinction is
in the way, because a primary server cannot tell (without asking a
standby or predicting the future) which one of these would be the
appropriate level.
Pick a new name for the combined setting to make it clearer that it
covers all (non-logical) backup and replication uses. The old values
are still accepted but are converted internally.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: David Steele <david@pgmasters.net>
NextXID has been rendered in the form of a pg_lsn even though it
really is not. This can cause confusion, so change the format from
%u/%u to %u:%u, per discussion on hackers.
Complaint by me, patch by me and Bruce, reviewed by Michael Paquier
and Alvaro. Applied to HEAD only.
Author: Joe Conway, Bruce Momjian
Reviewed-by: Michael Paquier, Alvaro Herrera
Backpatch-through: master
The variables newestCommitTs and oldestCommitTs sound as if they are
timestamps, but in fact they are the transaction Ids that correspond
to the newest and oldest timestamps rather than the actual timestamps.
Rename these variables to reflect that they are actually xids: to wit
newestCommitTsXid and oldestCommitTsXid respectively. Also modify
related code in a similar fashion, particularly the user facing output
emitted by pg_controldata and pg_resetxlog.
Complaint and patch by me, review by Tom Lane and Alvaro Herrera.
Backpatch to 9.5 where these variables were first introduced.
There are three main changes here:
1. No longer cause a start failure in a standby if the feature is
disabled in postgresql.conf but enabled in the master. This reverts one
part of commit 4f3924d9cd43; what we keep is the ability of the standby
to activate/deactivate the module (which includes creating and removing
segments as appropriate) during replay of such actions in the master.
2. Replay WAL records affecting commitTS even if the feature is
disabled. This means the standby will always have the same state as the
master after replay.
3. Have COMMIT PREPARE record the transaction commit time as well. We
were previously only applying it in the normal transaction commit path.
Author: Petr Jelínek
Discussion: http://www.postgresql.org/message-id/CAHGQGwHereDzzzmfxEBYcVQu3oZv6vZcgu1TPeERWbDc+gQ06g@mail.gmail.com
Discussion: http://www.postgresql.org/message-id/CAHGQGwFuzfO4JscM9LCAmCDCxp_MfLvN4QdB+xWsS-FijbjTYQ@mail.gmail.com
Additionally, I cleaned up nearby code related to replication origins,
which I found a bit hard to follow, and fixed a couple of typos.
Backpatch to 9.5, where this code was introduced.
Per bug reports from Fujii Masao and subsequent discussion.
It was an oversight in the original commit.
Also note in the sample config file that changing wal_log_hints requires a
restart.
Michael Paquier. Backpatch to 9.4, where wal_log_hints was added.
Transactions can now set their commit timestamp directly as they commit,
or an external transaction commit timestamp can be fed from an outside
system using the new function TransactionTreeSetCommitTsData(). This
data is crash-safe, and truncated at Xid freeze point, same as pg_clog.
This module is disabled by default because it causes a performance hit,
but can be enabled in postgresql.conf requiring only a server restart.
A new test in src/test/modules is included.
Catalog version bumped due to the new subdirectory within PGDATA and a
couple of new SQL functions.
Authors: Álvaro Herrera and Petr Jelínek
Reviewed to varying degrees by Michael Paquier, Andres Freund, Robert
Haas, Amit Kapila, Fujii Masao, Jaime Casanova, Simon Riggs, Steven
Singer, Peter Eisentraut
Add a new XLOG_FPI_FOR_HINT record type, and use that for full-page images
generated for hint bit updates, when checksums are enabled. The new record
type is replayed exactly the same as XLOG_FPI, but allows them to be tallied
separately e.g. in pg_xlogdump.
Each WAL record now carries information about the modified relation and
block(s) in a standardized format. That makes it easier to write tools that
need that information, like pg_rewind, prefetching the blocks to speed up
recovery, etc.
There's a whole new API for building WAL records, replacing the XLogRecData
chains used previously. The new API consists of XLogRegister* functions,
which are called for each buffer and chunk of data that is added to the
record. The new API also gives more control over when a full-page image is
written, by passing flags to the XLogRegisterBuffer function.
This also simplifies the XLogReadBufferForRedo() calls. The function can dig
the relation and block number from the WAL record, so they no longer need to
be passed as arguments.
For the convenience of redo routines, XLogReader now disects each WAL record
after reading it, copying the main data part and the per-block data into
MAXALIGNed buffers. The data chunks are not aligned within the WAL record,
but the redo routines can assume that the pointers returned by XLogRecGet*
functions are. Redo routines are now passed the XLogReaderState, which
contains the record in the already-disected format, instead of the plain
XLogRecord.
The new record format also makes the fixed size XLogRecord header smaller,
by removing the xl_len field. The length of the "main data" portion is now
stored at the end of the WAL record, and there's a separate header after
XLogRecord for it. The alignment padding at the end of XLogRecord is also
removed. This compansates for the fact that the new format would otherwise
be more bulky than the old format.
Reviewed by Andres Freund, Amit Kapila, Michael Paquier, Alvaro Herrera,
Fujii Masao.
There are four weaknesses in728f152e07f998d2cb4fe5f24ec8da2c3bda98f2:
* append_init() in heapdesc.c was ugly and required that rm_identify
return values are only valid till the next call. Instead just add a
couple more switch() cases for the INIT_PAGE cases. Now the returned
value will always be valid.
* a couple rm_identify() callbacks missed masking xl_info with
~XLR_INFO_MASK.
* pg_xlogdump didn't map a NULL rm_identify to UNKNOWN or a similar
string.
* append_init() was called when id=NULL - which should never actually
happen. But it's better to be careful.
This is primarily useful for the upcoming pg_xlogdump --stats feature,
but also allows to remove some duplicated code in the rmgr_desc
routines.
Due to the separation and harmonization, the output of dipsplayed
records changes somewhat. But since this isn't enduser oriented
content that's ok.
It's potentially desirable to further change pg_xlogdump's display of
records. It previously wasn't possible to show the record type
separately from the description forcing it to be in the last
column. But that's better done in a separate commit.
Author: Abhijit Menon-Sen, slightly editorialized by me
Reviewed-By: Álvaro Herrera, Andres Freund, and Heikki Linnakangas
Discussion: 20140604104716.GA3989@toroid.org
Commit a730183926 created rather a mess by
putting dependencies on backend-only include files into include/common.
We really shouldn't do that. To clean it up:
* Move TABLESPACE_VERSION_DIRECTORY back to its longtime home in
catalog/catalog.h. We won't consider this symbol part of the FE/BE API.
* Push enum ForkNumber from relfilenode.h into relpath.h. We'll consider
relpath.h as the source of truth for fork numbers, since relpath.c was
already partially serving that function, and anyway relfilenode.h was
kind of a random place for that enum.
* So, relfilenode.h now includes relpath.h rather than vice-versa. This
direction of dependency is fine. (That allows most, but not quite all,
of the existing explicit #includes of relpath.h to go away again.)
* Push forkname_to_number from catalog.c to relpath.c, just to centralize
fork number stuff a bit better.
* Push GetDatabasePath from catalog.c to relpath.c; it was rather odd
that the previous commit didn't keep this together with relpath().
* To avoid needing relfilenode.h in common/, redefine the underlying
function (now called GetRelationPath) as taking separate OID arguments,
and make the APIs using RelFileNode or RelFileNodeBackend into macro
wrappers. (The macros have a potential multiple-eval risk, but none of
the existing call sites have an issue with that; one of them had such a
risk already anyway.)
* Fix failure to follow the directions when "init" fork type was added;
specifically, the errhint in forkname_to_number wasn't updated, and neither
was the SGML documentation for pg_relation_size().
* Fix tablespace-path-too-long check in CreateTableSpace() to account for
fork-name component of maximum-length pathnames. This requires putting
FORKNAMECHARS into a header file, but it was rather useless (and
actually unreferenced) where it was.
The last couple of items are potentially back-patchable bug fixes,
if anyone is sufficiently excited about them; but personally I'm not.
Per a gripe from Christoph Berg about how include/common wasn't
self-contained.
When wal_level=logical, we'll log columns from the old tuple as
configured by the REPLICA IDENTITY facility added in commit
07cacba983. This makes it possible
a properly-configured logical replication solution to correctly
follow table updates even if they change the chosen key columns,
or, with REPLICA IDENTITY FULL, even if the table has no key at
all. Note that updates which do not modify the replica identity
column won't log anything extra, making the choice of a good key
(i.e. one that will rarely be changed) important to performance
when wal_level=logical is configured.
Each insert, update, or delete to a catalog table will also log
the CMIN and/or CMAX values of stamped by the current transaction.
This is necessary because logical decoding will require access to
historical snapshots of the catalog in order to decode some data
types, and the CMIN/CMAX values that we may need in order to judge
row visibility may have been overwritten by the time we need them.
Andres Freund, reviewed in various versions by myself, Heikki
Linnakangas, KONDO Mitsumasa, and many others.
