Several backend-side loops scanning one or more directories with
ReadDir() (WAL segment recycle/removal in xlog.c, backend-side directory
copy, temporary file removal, configuration file parsing, some logical
decoding logic and some pgtz stuff) already know the type of the entry
being scanned thanks to the dirent structure associated to the entry, on
platforms where we know about DT_REG, DT_DIR and DT_LNK to make the
difference between a regular file, a directory and a symbolic link.
Relying on the direct structure of an entry saves a few system calls to
stat() and lstat() in the loops updated here, shaving some code while on
it. The logic of the code remains the same, calling stat() or lstat()
depending on if it is necessary to look through symlinks.
Authors: Nathan Bossart, Bharath Rupireddy
Reviewed-by: Andres Freund, Thomas Munro, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACV8n-J-f=yiLUOx2=HrQGPSOZM3nWzyQQvLPcccPXxEdg@mail.gmail.com
The reverts the following and makes some associated cleanups:
commit f79b803dc: Common SQL/JSON clauses
commit f4fb45d15: SQL/JSON constructors
commit 5f0adec25: Make STRING an unreserved_keyword.
commit 33a377608: IS JSON predicate
commit 1a36bc9db: SQL/JSON query functions
commit 606948b05: SQL JSON functions
commit 49082c2cc: RETURNING clause for JSON() and JSON_SCALAR()
commit 4e34747c8: JSON_TABLE
commit fadb48b00: PLAN clauses for JSON_TABLE
commit 2ef6f11b0: Reduce running time of jsonb_sqljson test
commit 14d3f24fa: Further improve jsonb_sqljson parallel test
commit a6baa4bad: Documentation for SQL/JSON features
commit b46bcf7a4: Improve readability of SQL/JSON documentation.
commit 112fdb352: Fix finalization for json_objectagg and friends
commit fcdb35c32: Fix transformJsonBehavior
commit 4cd8717af: Improve a couple of sql/json error messages
commit f7a605f63: Small cleanups in SQL/JSON code
commit 9c3d25e17: Fix JSON_OBJECTAGG uniquefying bug
commit a79153b7a: Claim SQL standard compliance for SQL/JSON features
commit a1e7616d6: Rework SQL/JSON documentation
commit 8d9f9634e: Fix errors in copyfuncs/equalfuncs support for JSON node types.
commit 3c633f32b: Only allow returning string types or bytea from json_serialize
commit 67b26703b: expression eval: Fix EEOP_JSON_CONSTRUCTOR and EEOP_JSONEXPR size.
The release notes are also adjusted.
Backpatch to release 15.
Discussion: https://postgr.es/m/40d2c882-bcac-19a9-754d-4299e1d87ac7@postgresql.org
During dumptuples() the call to writetuple() would pfree any non-null
tuple. This was quite wasteful as this happens just before we perform a
reset of the context which stores all of those tuples.
It seems to make sense to do a bit of a code refactor to make this work,
so here we just get rid of the writetuple function and adjust the WRITETUP
macro to call the state's writetup function. The WRITETUP usage in
mergeonerun() always has state->slabAllocatorUsed == true, so writetuple()
would never free the tuple or do any memory accounting. The only call
path that needs memory accounting done is in dumptuples(), so let's just
do it manually there.
In passing, let's get rid of the state->memtupcount-- code that counts the
memtupcount down to 0 one tuple at a time inside the loop. That seems to
be a rather inefficient way to set memtupcount to 0, so let's just zero it
after the loop instead.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvqZXoDCyrfCzZJR0-xH+7_q+GgitcQiYXUjRani7h4j8Q@mail.gmail.com
Commit e3ce2de09d rearranged this
function to be able to identify which inherited role had admin option
on the target role, but it got the order of operations wrong, causing
the function to return wrong answers in the presence of non-inherited
grants.
Fix that, and add a test case that verifies the correct behavior.
Patch by me, reviewed by Nathan Bossart
Discussion: http://postgr.es/m/CA+TgmoYamnu-xt-u7CqjYWnRiJ6BQaSpYOHXP=r4QGTfd1N_EA@mail.gmail.com
c6e0fe1f2 added a new pointer field to SlabBlock to make it 4 bytes larger
on 32-bit machines. Prior to that commit, the size of that struct was a
multiple of 8, which meant that MAXALIGN(sizeof(SlabBlock)) was the same
as sizeof(SlabBlock), however, after c6e0fe1f2, due to the addition of the
new pointer field to store a pointer to the owning context, that was no
longer true on builds with sizeof(void *) == 4.
This problem was highlighted by an Assert failure which was checking that
the pointer given to pfree() was MAXALIGNED. Various 32-bit ARM buildfarm
animals were failing. These have MAXIMUM_ALIGNOF of 8. The only 32-bit
testing I'd managed to do on c6e0fe1f2 had been on x86, which has a
MAXIMUM_ALIGNOF of 4, therefore did not exhibit this issue.
Here we define Slab_BLOCKHDRSZ and copy what is being done in aset.c and
generation.c for doing calculations based on the size of the context's
block type. This means that SlabAlloc() will now always return a
MAXALIGNed pointer.
This also fixes an incorrect sentinel_ok() check in SlabCheck() which was
incorrectly checking the wrong sentinel byte. This must have previously
not caused any issues due to the fullChunkSize never being large enough to
store the sentinel byte.
Diagnosed-by: Tomas Vondra, Tom Lane
Author: Tomas Vondra, David Rowley
Discussion: https://postgr.es/m/CAA4eK1%2B1JyW5TiL%3DyV-3Uq1CrfnTyn0Xrk5uArt31Z%3D8rgPhXQ%40mail.gmail.com
More than twenty years ago (79fcde48b), we hacked the postmaster
to avoid a core-dump on systems that didn't support fflush(NULL).
We've mostly, though not completely, hewed to that rule ever since.
But such systems are surely gone in the wild, so in the spirit of
cleaning out no-longer-needed portability hacks let's get rid of
multiple per-file fflush() calls in favor of using fflush(NULL).
Also, we were fairly inconsistent about whether to fflush() before
popen() and system() calls. While we've received no bug reports
about that, it seems likely that at least some of these call sites
are at risk of odd behavior, such as error messages appearing in
an unexpected order. Rather than expend a lot of brain cells
figuring out which places are at hazard, let's just establish a
uniform coding rule that we should fflush(NULL) before these calls.
A no-op fflush() is surely of trivial cost compared to launching
a sub-process via a shell; while if it's not a no-op then we likely
need it.
Discussion: https://postgr.es/m/2923412.1661722825@sss.pgh.pa.us
Whenever we palloc a chunk of memory, traditionally, we prefix the
returned pointer with a pointer to the memory context to which the chunk
belongs. This is required so that we're able to easily determine the
owning context when performing operations such as pfree() and repalloc().
For the AllocSet context, prior to this commit we additionally prefixed
the pointer to the owning context with the size of the chunk. This made
the header 16 bytes in size. This 16-byte overhead was required for all
AllocSet allocations regardless of the allocation size.
For the generation context, the problem was worse; in addition to the
pointer to the owning context and chunk size, we also stored a pointer to
the owning block so that we could track the number of freed chunks on a
block.
The slab allocator had a 16-byte chunk header.
The changes being made here reduce the chunk header size down to just 8
bytes for all 3 of our memory context types. For small to medium sized
allocations, this significantly increases the number of chunks that we can
fit on a given block which results in much more efficient use of memory.
Additionally, this commit completely changes the rule that pointers to
palloc'd memory must be directly prefixed by a pointer to the owning
memory context and instead, we now insist that they're directly prefixed
by an 8-byte value where the least significant 3-bits are set to a value
to indicate which type of memory context the pointer belongs to. Using
those 3 bits as an index (known as MemoryContextMethodID) to a new array
which stores the methods for each memory context type, we're now able to
pass the pointer given to functions such as pfree() and repalloc() to the
function specific to that context implementation to allow them to devise
their own methods of finding the memory context which owns the given
allocated chunk of memory.
The reason we're able to reduce the chunk header down to just 8 bytes is
because of the way we make use of the remaining 61 bits of the required
8-byte chunk header. Here we also implement a general-purpose MemoryChunk
struct which makes use of those 61 remaining bits to allow the storage of
a 30-bit value which the MemoryContext is free to use as it pleases, and
also the number of bytes which must be subtracted from the chunk to get a
reference to the block that the chunk is stored on (also 30 bits). The 1
additional remaining bit is to denote if the chunk is an "external" chunk
or not. External here means that the chunk header does not store the
30-bit value or the block offset. The MemoryContext can use these
external chunks at any time, but must use them if any of the two 30-bit
fields are not large enough for the value(s) that need to be stored in
them. When the chunk is marked as external, it is up to the MemoryContext
to devise its own means to determine the block offset.
Using 3-bits for the MemoryContextMethodID does mean we're limiting
ourselves to only having a maximum of 8 different memory context types.
We could reduce the bit space for the 30-bit value a little to make way
for more than 3 bits, but it seems like it might be better to do that only
if we ever need more than 8 context types. This would only be a problem
if some future memory context type which does not use MemoryChunk really
couldn't give up any of the 61 remaining bits in the chunk header.
With this MemoryChunk, each of our 3 memory context types can quickly
obtain a reference to the block any given chunk is located on. AllocSet
is able to find the context to which the chunk is owned, by first
obtaining a reference to the block by subtracting the block offset as is
stored in the 'hdrmask' field and then referencing the block's 'aset'
field. The Generation context uses the same method, but GenerationBlock
did not have a field pointing back to the owning context, so one is added
by this commit.
In aset.c and generation.c, all allocations larger than allocChunkLimit
are stored on dedicated blocks. When there's just a single chunk on a
block like this, it's easy to find the block from the chunk, we just
subtract the size of the block header from the chunk pointer. The size of
these chunks is also known as we store the endptr on the block, so we can
just subtract the pointer to the allocated memory from that. Because we
can easily find the owning block and the size of the chunk for these
dedicated blocks, we just always use external chunks for allocation sizes
larger than allocChunkLimit. For generation.c, this sidesteps the problem
of non-external MemoryChunks being unable to represent chunk sizes >= 1GB.
This is less of a problem for aset.c as we store the free list index in
the MemoryChunk's spare 30-bit field (the value of which will never be
close to using all 30-bits). We can easily reverse engineer the chunk size
from this when needed. Storing this saves AllocSetFree() from having to
make a call to AllocSetFreeIndex() to determine which free list to put the
newly freed chunk on.
For the slab allocator, this commit adds a new restriction that slab
chunks cannot be >= 1GB in size. If there happened to be any users of
slab.c which used chunk sizes this large, they really should be using
AllocSet instead.
Here we also add a restriction that normal non-dedicated blocks cannot be
1GB or larger. It's now not possible to pass a 'maxBlockSize' >= 1GB
during the creation of an AllocSet or Generation context. Allocations can
still be larger than 1GB, it's just these will always be on dedicated
blocks (which do not have the 1GB restriction).
Author: Andres Freund, David Rowley
Discussion: https://postgr.es/m/CAApHDvpjauCRXcgcaL6+e3eqecEHoeRm9D-kcbuvBitgPnW=vw@mail.gmail.com
SUSv3 <netinet/in.h> defines struct sockaddr_in6, and all targeted Unix
systems have it. Windows has it in <ws2ipdef.h>. Remove the configure
probe, the macro and a small amount of dead code.
Also remove a mention of IPv6-less builds from the documentation, since
there aren't any.
This is similar to commits f5580882 and 077bf2f2 for Unix sockets. Even
though AF_INET6 is an "optional" component of SUSv3, there are no known
modern operating system without it, and it seems even less likely to be
omitted from future systems than AF_UNIX.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGKErNfhmvb_H0UprEmp4LPzGN06yR2_0tYikjzB-2ECMw@mail.gmail.com
In a similar effort to f01592f91, here we're targetting fixing the
warnings where we've deemed the shadowing variable to serve a close enough
purpose to the shadowed variable just to reuse the shadowed version and
not declare the shadowing variable at all.
By my count, this takes the warning count from 106 down to 71.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220825020839.GT2342@telsasoft.com
The GRANT statement can now specify WITH INHERIT TRUE or WITH
INHERIT FALSE to control whether the member inherits the granted
role's permissions. For symmetry, you can now likewise write
WITH ADMIN TRUE or WITH ADMIN FALSE to turn ADMIN OPTION on or off.
If a GRANT does not specify WITH INHERIT, the behavior based on
whether the member role is marked INHERIT or NOINHERIT. This means
that if all roles are marked INHERIT or NOINHERIT before any role
grants are performed, the behavior is identical to what we had before;
otherwise, it's different, because ALTER ROLE [NO]INHERIT now only
changes the default behavior of future grants, and has no effect on
existing ones.
Patch by me. Reviewed and testing by Nathan Bossart and Tushar Ahuja,
with design-level comments from various others.
Discussion: http://postgr.es/m/CA+Tgmoa5Sf4PiWrfxA=sGzDKg0Ojo3dADw=wAHOhR9dggV=RmQ@mail.gmail.com
SplitToVariants() in the ispell code, lseg_inside_poly() in geo_ops.c,
and regex_selectivity_sub() in selectivity estimation could recurse
until stack overflow; fix by adding check_stack_depth() calls.
So could next() in the regex compiler, but that case is better fixed by
converting its tail recursion to a loop. (We probably get better code
that way too, since next() can now be inlined into its sole caller.)
There remains a reachable stack overrun in the Turkish stemmer, but
we'll need some advice from the Snowball people about how to fix that.
Per report from Egor Chindyaskin and Alexander Lakhin. These mistakes
are old, so back-patch to all supported branches.
Richard Guo and Tom Lane
Discussion: https://postgr.es/m/1661334672.728714027@f473.i.mail.ru
These should have been included in 421892a19 as these shadowed variable
warnings can also be fixed by adjusting the scope of the shadowed variable
to put the declaration for it in an inner scope.
This is part of the same effort as f01592f91.
By my count, this takes the warning count from 114 down to 106.
Author: David Rowley and Justin Pryzby
Discussion: https://postgr.es/m/CAApHDvrwLGBP%2BYw9vriayyf%3DXR4uPWP5jr6cQhP9au_kaDUhbA%40mail.gmail.com
This commit moves authn_id into a new global structure called
ClientConnectionInfo (mapping to a MyClientConnectionInfo for each
backend) which is intended to hold all the client information that
should be shared between the backend and any of its parallel workers,
access for extensions and triggers being the primary use case. There is
no need to push all the data of Port to the workers, and authn_id is
quite a generic concept so using a separate structure provides the best
balance (the name of the structure has been suggested by Robert Haas).
While on it, and per discussion as this would be useful for a potential
SYSTEM_USER that can be accessed through parallel workers, a second
field is added for the authentication method, copied directly from
Port.
ClientConnectionInfo is serialized and restored using a new parallel
key and a structure tracks the length of the authn_id, making the
addition of more fields straight-forward.
Author: Jacob Champion
Reviewed-by: Bertrand Drouvot, Stephen Frost, Robert Haas, Tom Lane,
Michael Paquier, Julien Rouhaud
Discussion: https://postgr.es/m/793d990837ae5c06a558d58d62de9378ab525d83.camel@vmware.com
Previously, membership of role A in role B could be recorded in the
catalog tables only once. This meant that a new grant of role A to
role B would overwrite the previous grant. For other object types, a
new grant of permission on an object - in this case role A - exists
along side the existing grant provided that the grantor is different.
Either grant can be revoked independently of the other, and
permissions remain so long as at least one grant remains. Make role
grants work similarly.
Previously, when granting membership in a role, the superuser could
specify any role whatsoever as the grantor, but for other object types,
the grantor of record must be either the owner of the object, or a
role that currently has privileges to perform a similar GRANT.
Implement the same scheme for role grants, treating the bootstrap
superuser as the role owner since roles do not have owners. This means
that attempting to revoke a grant, or admin option on a grant, can now
fail if there are dependent privileges, and that CASCADE can be used
to revoke these. It also means that you can't grant ADMIN OPTION on
a role back to a user who granted it directly or indirectly to you,
similar to how you can't give WITH GRANT OPTION on a privilege back
to a role which granted it directly or indirectly to you.
Previously, only the superuser could specify GRANTED BY with a user
other than the current user. Relax that rule to allow the grantor
to be any role whose privileges the current user posseses. This
doesn't improve compatibility with what we do for other object types,
where support for GRANTED BY is entirely vestigial, but it makes this
feature more usable and seems to make sense to change at the same time
we're changing related behaviors.
Along the way, fix "ALTER GROUP group_name ADD USER user_name" to
require the same privileges as "GRANT group_name TO user_name".
Previously, CREATEROLE privileges were sufficient for either, but
only the former form was permissible with ADMIN OPTION on the role.
Now, either CREATEROLE or ADMIN OPTION on the role suffices for
either spelling.
Patch by me, reviewed by Stephen Frost.
Discussion: http://postgr.es/m/CA+TgmoaFr-RZeQ+WoQ5nKPv97oT9+aDgK_a5+qWHSgbDsMp1Vg@mail.gmail.com
Compiling with -Wshadow=compatible-local yields quite a few warnings about
local variables being shadowed by compatible local variables in an inner
scope. Of course, this is perfectly valid in C, but we have had bugs in
the past as a result of developers failing to notice this. af7d270dd is a
recent example.
Here we do a cleanup of warnings we receive from -Wshadow=compatible-local
for code which is new to PostgreSQL 15. We've yet to have the discussion
about if we actually ever want to run that as a standard compilation flag.
We'll need to at least get the number of warnings down to something easier
to manage before we can realistically consider if we want this or not.
This commit is the first step towards reducing the warnings.
The changes being made here are all fairly trivial. Because of that, and
the fact that v15 is still in beta, this is being back-patched into 15.
It seems more risky not to do this as the risk of future bugs is increased
by the additional conflicts that this commit could cause for any future
bug fixes touching the same areas as this commit.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220817145434.GC26426%40telsasoft.com
Backpatch-through: 15
The standard way to check for list emptiness is to compare the
List pointer to NIL; our list code goes out of its way to ensure
that that is the only representation of an empty list. (An
acceptable alternative is a plain boolean test for non-null
pointer, but explicit mention of NIL is usually preferable.)
Various places didn't get that memo and expressed the condition
with list_length(), which might not be so bad except that there
were such a variety of ways to check it exactly: equal to zero,
less than or equal to zero, less than one, yadda yadda. In the
name of code readability, let's standardize all those spellings
as "list == NIL" or "list != NIL". (There's probably some
microscopic efficiency gain too, though few of these look to be
at all performance-critical.)
A very small number of cases were left as-is because they seemed
more consistent with other adjacent list_length tests that way.
Peter Smith, with bikeshedding from a number of us
Discussion: https://postgr.es/m/CAHut+PtQYe+ENX5KrONMfugf0q6NHg4hR5dAhqEXEc2eefFeig@mail.gmail.com
When enlarging the work buffers of a VarStringSortSupport object,
varstrfastcmp_locale was careful to keep them in the ssup_cxt
memory context; but varstr_abbrev_convert just used palloc().
The latter creates a hazard that the buffers could be freed out
from under the VarStringSortSupport object, resulting in stomping
on whatever gets allocated in that memory later.
In practice, because we only use this code for ICU collations
(cf. 3df9c374e), the problem is confined to use of ICU collations.
I believe it may have been unreachable before the introduction
of incremental sort, too, as traditional sorting usually just
uses one context for the duration of the sort.
We could fix this by making the broken stanzas in varstr_abbrev_convert
match the non-broken ones in varstrfastcmp_locale. However, it seems
like a better idea to dodge the issue altogether by replacing the
pfree-and-allocate-anew coding with repalloc, which automatically
preserves the chunk's memory context. This fix does add a few cycles
because repalloc will copy the chunk's content, which the existing
coding assumes is useless. However, we don't expect that these buffer
enlargement operations are performance-critical. Besides that, it's
far from obvious that copying the buffer contents isn't required, since
these stanzas make no effort to mark the buffers invalid by resetting
last_returned, cache_blob, etc. That seems to be safe upon examination,
but it's fragile and could easily get broken in future, which wouldn't
get revealed in testing with short-to-moderate-size strings.
Per bug #17584 from James Inform. Whether or not the issue is
reachable in the older branches, this code has been broken on its
own terms from its introduction, so patch all the way back.
Discussion: https://postgr.es/m/17584-95c79b4a7d771f44@postgresql.org
Since HAVE_UNIX_SOCKETS is now defined unconditionally, remove the macro
and drop a small amount of dead code.
The last known systems not to have them (as far as I know at least) were
QNX, which we de-supported years ago, and Windows, which now has them.
If a new OS ever shows up with the POSIX sockets API but without working
AF_UNIX, it'll presumably still be able to compile the code, and fail at
runtime with an unsupported address family error. We might want to
consider adding a HINT that you should turn off the option to use it if
your network stack doesn't support it at that point, but it doesn't seem
worth making the relevant code conditional at compile time.
Also adjust a couple of places in the docs and comments that referred to
builds without Unix-domain sockets, since there aren't any. Windows
still gets a special mention in those places, though, because we don't
try to use them by default there yet.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2BL_3brvh%3D8e0BW_VfX9h7MtwgN%3DnFHP5o7X2oZucY9dg%40mail.gmail.com
As reported by Yura Sokolov, scanning the snapshot->xip array has
noticeable impact on scalability when there are a large number of
concurrent writers. Use the optimized (on x86-64) routine from b6ef16756
to speed up searches through the [sub]xip arrays. One benchmark showed
a 5% increase in transaction throughput with 128 concurrent writers,
and a 50% increase in a pathological case of 1024 writers. While a hash
table would have scaled even better, it was ultimately rejected because
of concerns around code complexity and memory allocation. Credit to Andres
Freund for the idea to optimize linear search using SIMD instructions.
Nathan Bossart
Reviewed by: Andres Freund, John Naylor, Bharath Rupireddy, Masahiko Sawada
Discussion: https://postgr.es/m/20220713170950.GA3116318%40nathanxps13
This commit addresses a few things around GUCs:
- The TCP-related parameters (the four tcp_keepalives_* and
client_connection_check_interval are listed in postgresql.conf.sample in
a subsection called "TCP settings" of "CONNECTIONS AND AUTHENTICATION",
but they did not have their own group name in guc.c.
- enable_group_by_reordering, stats_fetch_consistency and
recovery_prefetch had an inconsistent description, missing a dot at the
end.
- In postgresql.conf.sample, "Process title" should not have a section
of its own, but it should be a subsection of "REPORTING AND LOGGING".
This impacts the contents of pg_settings, which could be seen as a
compatibility break, so no backpatch is done. This is similar to the
cleanup done in a55a984.
Author: Shinya Kato
Discussion: https://postgr.es/m/5e0c9c608624eafbba910c344282cb14@oss.nttdata.com
Buildfarm member jacana (MinGW) has been complaining that
get_iso_localename is defined but not used. This is evidently
fallout from the recent removal of VS2013 support in pg_locale.c.
Rearrange the #ifs so that get_iso_localename and its subroutine
search_locale_enum won't get built on MinGW.
I also noticed that a comment in get_iso_localename cross-
referenced a comment in IsoLocaleName that isn't there anymore.
Put back what I think is the referenced material.
Now that lstat() reports junction points with S_IFLNK/S_ISLINK(), and
unlink() can unlink them, there is no need for conditional code for
Windows in a few places. That was expressed by testing for WIN32 or
S_ISLNK, which we can now constant-fold.
The coding around pgwin32_is_junction() was a bit suspect anyway, as we
never checked for errors, and we also know that errors can be spuriously
reported because of transient sharing violations on this OS. The
lstat()-based code has handling for that.
This also reverts 4fc6b6ee on master only. That was done because
lstat() didn't previously work for symlinks (junction points), but now
it does.
Tested-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/CA%2BhUKGLfOOeyZpm5ByVcAt7x5Pn-%3DxGRNCvgiUPVVzjFLtnY0w%40mail.gmail.com
This is particularly useful when log_min_messages is set to FATAL, so as
one can know which file was not getting loaded whether hba_file or
ident_file are set to some non-default values. If using the default
values of these GUC parameters, the same reports are generated.
This commit changes the load (startup) and reload (SIGHUP) messages.
Author: Julien Rouhaud
Discussion: https://postgr.es/m/20220223045959.35ipdsvbxcstrhya@jrouhaud
pread() and pwrite() are in SUSv2, and all targeted Unix systems have
them.
Previously, we defined pg_pread and pg_pwrite to emulate these function
with lseek() on old Unixen. The names with a pg_ prefix were a reminder
of a portability hazard: they might change the current file position.
That hazard is gone, so we can drop the prefixes.
Since the remaining replacement code is Windows-only, move it into
src/port/win32p{read,write}.c, and move the declarations into
src/include/port/win32_port.h.
No need for vestigial HAVE_PREAD, HAVE_PWRITE macros as they were only
used for declarations in port.h which have now moved into win32_port.h.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Greg Stark <stark@mit.edu>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
symlink() and readlink() are in SUSv2 and all targeted Unix systems have
them. We have partial emulation on Windows. Code that raised runtime
errors on systems without it has been dead for years, so we can remove
that and also references to such systems in the documentation.
Define HAVE_READLINK and HAVE_SYMLINK macros on Unix. Our Windows
replacement functions based on junction points can't be used for
relative paths or for non-directories, so the macros can be used to
check for full symlink support. The places that deal with tablespaces
can just use symlink functions without checking the macros. (If they
did check the macros, they'd need to provide an #else branch with a
runtime or compile time error, and it'd be dead code.)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
dlopen() is in SUSv2 and all targeted Unix systems have it. We still
need replacement functions for Windows, but we don't need a configure
probe for that.
Since it's no longer needed by other operating systems, rename dlopen.c
to win32dlopen.c and move the declarations into win32_port.h.
Likewise, the macros RTLD_NOW and RTLD_GLOBAL now only need to be
defined on Windows, since all targeted Unix systems have 'em.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
Previously, a byte with the high bit set was just transmitted
as-is by charin() and charout(). This is problematic if the
database encoding is multibyte, because the result of charout()
won't be validly encoded, which breaks various stuff that
expects all text strings to be validly encoded. We've
previously decided to enforce encoding validity rather than try
to individually harden each place that might have a problem with
such strings, so it's time to do something about "char".
To fix, represent high-bit-set characters as \ooo (backslash
and three octal digits), following the ancient "escape" format
for bytea. charin() will continue to accept the old way as well,
though that is only reachable in single-byte encodings.
Add some test cases just so there is coverage for this code.
We'll otherwise leave this question undocumented as it was before,
because we don't really want to encourage end-user use of "char".
For the moment, back-patch into v15 so that this change appears
in 15beta3. If there's not great pushback we should consider
absorbing this change into the older branches.
Discussion: https://postgr.es/m/2318797.1638558730@sss.pgh.pa.us
The code tried to access ARR_DIMS(v)[0] and ARR_LBOUND(v)[0]
whether or not those values exist. This made the range check
on the "n" argument unstable --- it might or might not fail, and
if it did it would report garbage for the allowed upper limit.
These bogus accesses would probably annoy Valgrind, and if you
were very unlucky even lead to SIGSEGV.
Report and fix by Martin Kalcher. Back-patch to v14 where this
function was added.
Discussion: https://postgr.es/m/baaeb413-b8a8-4656-5757-ef347e5ec11f@aboutsource.net
There wasn't an especially nice way to read all of a file while
passing missing_ok = true. Add an additional overloaded variant
to support that use-case.
While here, refactor the C code to avoid a rats-nest of PG_NARGS
checks, instead handling the argument collection in the outer
wrapper functions. It's a bit longer this way, but far more
straightforward.
(Upon looking at the code coverage report for genfile.c, I was
impelled to also add a test case for pg_stat_file() -- tgl)
Kyotaro Horiguchi
Discussion: https://postgr.es/m/20220607.160520.1984541900138970018.horikyota.ntt@gmail.com
Commit 9a974cbcba arranged to preserve
the relfilenode of user tables across pg_upgrade, but failed to notice
that pg_upgrade treats pg_largeobject as a user table and thus it needs
the same treatment. Otherwise, large objects will appear to vanish
after a pg_upgrade.
Commit d498e052b4 fixed this problem
by teaching pg_dump to UPDATE pg_class.relfilenode for pg_largeobject
and its index. However, because an UPDATE on the catalog rows doesn't
change anything on disk, this can leave stray files behind in the new
cluster. They will normally be empty, but it's a little bit untidy.
Hence, this commit arranges to do the same thing using DDL. Specifically,
it makes TRUNCATE work for the pg_largeobject catalog when in
binary-upgrade mode, and it then uses that command in binary-upgrade
dumps as a way of setting pg_class.relfilenode for pg_largeobject and
its index. That way, the old files are removed from the new cluster.
Discussion: http://postgr.es/m/CA+TgmoYYMXGUJO5GZk1-MByJGu_bB8CbOL6GJQC8=Bzt6x6vDg@mail.gmail.com
In the initial data sort, if the bucket numbers are the same then
next sort on the hash value. Because index pages are kept in
hash value order, this gains a little speed by allowing the
eventual tuple insertions to be done sequentially, avoiding repeated
data movement within PageAddItem. This seems to be good for overall
speedup of 5%-9%, depending on the incoming data.
Simon Riggs, reviewed by Amit Kapila
Discussion: https://postgr.es/m/CANbhV-FG-1ZNMBuwhUF7AxxJz3u5137dYL-o6hchK1V_dMw86g@mail.gmail.com
Commit d8cd0c6c95 introduced a file
rename that could fail on Windows, probably due to other backends
having an open file handle to the old file of the same name.
Re-arrange the locking slightly to prevent that, by making sure the
open() and close() run while we hold the lock.
Thomas Munro. I added an explanatory comment.
Discussion: https://postgr.es/m/CA%2BhUKGLZtCTgp4NTWV-wGbR2Nyag71%3DEfYTKjDKnk%2BfkhuFMHw%40mail.gmail.com
This commit puts the implementation of Tuple sort variants into the separate
file tuplesortvariants.c. That gives better separation of the code and
serves well as the demonstration that Tuple sort variant can be defined outside
of tuplesort.c.
Discussion: https://postgr.es/m/CAPpHfdvjix0Ahx-H3Jp1M2R%2B_74P-zKnGGygx4OWr%3DbUQ8BNdw%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Pavel Borisov, Maxim Orlov, Matthias van de Meent
Reviewed-by: Andres Freund, John Naylor
The new TuplesortPublic data structure contains the definition of
sort-variant-specific interface methods and the part of Tuple sort operation
state required by their implementations. This will let define Tuple sort
variants without knowledge of Tuplesortstate, that is without knowledge
of generic sort implementation guts.
Discussion: https://postgr.es/m/CAPpHfdvjix0Ahx-H3Jp1M2R%2B_74P-zKnGGygx4OWr%3DbUQ8BNdw%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Pavel Borisov, Maxim Orlov, Matthias van de Meent
Reviewed-by: Andres Freund, John Naylor
This commit puts some generic work away from sort-variant-specific function.
In particular, tuplesort_put*() now doesn't need to decrease available memory
and switch to sort context before calling puttuple_common(). writetup()
doesn't need to free SortTuple.tuple and increase available memory.
Discussion: https://postgr.es/m/CAPpHfdvjix0Ahx-H3Jp1M2R%2B_74P-zKnGGygx4OWr%3DbUQ8BNdw%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Pavel Borisov, Maxim Orlov, Matthias van de Meent
Reviewed-by: Andres Freund, John Naylor
Abbreviation code is very similar along tuplesort_put*() functions. This
commit unifies that code and puts it into puttuple_common(). tuplesort_put*()
functions differs in the abbreviation condition, so it has been added as an
argument to the puttuple_common() function.
Discussion: https://postgr.es/m/CAPpHfdvjix0Ahx-H3Jp1M2R%2B_74P-zKnGGygx4OWr%3DbUQ8BNdw%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Pavel Borisov, Maxim Orlov, Matthias van de Meent
Reviewed-by: Andres Freund, John Naylor
This commit is the preparation to move abbreviation logic into
puttuple_common(). The new removeabbrev function turns datum1 representation
of SortTuple's from the abbreviated key to the first column value. Therefore,
it encapsulates the differential part of abbreviation handling code in
tuplesort_put*() functions, making these functions similar.
Discussion: https://postgr.es/m/CAPpHfdvjix0Ahx-H3Jp1M2R%2B_74P-zKnGGygx4OWr%3DbUQ8BNdw%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Pavel Borisov, Maxim Orlov, Matthias van de Meent
Reviewed-by: Andres Freund, John Naylor
It's currently unclear how do we split functionality between
Tuplesortstate.copytup() function and tuplesort_put*() functions.
For instance, copytup_index() and copytup_datum() return error while
tuplesort_putindextuplevalues() and tuplesort_putdatum() do their work.
This commit removes Tuplesortstate.copytup() altogether, putting the
corresponding code into tuplesort_put*().
Discussion: https://postgr.es/m/CAPpHfdvjix0Ahx-H3Jp1M2R%2B_74P-zKnGGygx4OWr%3DbUQ8BNdw%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Pavel Borisov, Maxim Orlov, Matthias van de Meent
Reviewed-by: Andres Freund, John Naylor
Since a2c8499, HbaFileName (default pg_hba.conf) was getting used
instead of IdentFileName (default pg_ident.conf) as the parent file to
use as reference when parsing the contents of pg_ident.conf, with
pg_ident.conf correctly opened, when feeding this information to
pg_ident_file_mappings. This had two consequences:
- On an I/O error when reading pg_ident.conf, the user would get an
ERROR message referring to pg_hba.conf and not pg_ident.conf.
- When reading an external file with a relative path using '@' in
pg_ident.conf, the directory used to look at the file to load would be
the base directory of pg_hba.conf rather than the one of pg_ident.conf,
leading to errors in pg_ident_file_mappings inconsistent with what gets
loaded at startup when pg_ident.conf and pg_hba.conf are located in
different directories.
This error only impacted the SQL view pg_ident_file_mappings that uses a
logic new to v15 to fill the view with the parsed information, not the
code paths loading these authentication files at startup.
Author: Julien Rouhaud
Discussion: https://postgr.es/m/20220726050402.vsr6fmz7rsgpmdz3@jrouhaud
Backpatch-through: 15
Previously we did this after InitPostgres, at a somewhat randomly chosen
place within PostgresMain. However, since commit a0ffa885e doing this
outside a transaction can cause a crash, if we need to check permissions
while replacing a placeholder GUC. (Besides which, a preloaded library
could itself want to do database access within _PG_init.)
To avoid needing an additional transaction start/end in every session,
move the process_session_preload_libraries call to within InitPostgres's
transaction. That requires teaching the code not to call it when
InitPostgres is called from somewhere other than PostgresMain, since
we don't want session_preload_libraries to affect background workers.
The most future-proof solution here seems to be to add an additional
flag parameter to InitPostgres; fortunately, we're not yet very worried
about API stability for v15.
Doing this also exposed the fact that we're currently honoring
session_preload_libraries in walsenders, even those not connected to
any database. This seems, at minimum, a POLA violation: walsenders
are not interactive sessions. Let's stop doing that.
(All these comments also apply to local_preload_libraries, of course.)
Per report from Gurjeet Singh (thanks also to Nathan Bossart and Kyotaro
Horiguchi for review). Backpatch to v15 where a0ffa885e came in.
Discussion: https://postgr.es/m/CABwTF4VEpwTHhRQ+q5MiC5ucngN-whN-PdcKeufX7eLSoAfbZA@mail.gmail.com
