Attributes can now have options, just as relations and tablespaces do, and
the reloptions code is used to parse, validate, and store them. For
simplicity and because these options are not performance critical, we store
them in a separate cache rather than the main relcache.
Thanks to Alex Hunsaker for the review.
parse analysis phase, rather than at execution time. This makes parameter
handling work the same as it does in ordinary plannable queries, and in
particular fixes the incompatibility that Pavel pointed out with plpgsql's
new handling of variable references. plancache.c gets a little bit
grottier, but the alternatives seem worse.
underlying catalog not only the index itself. Otherwise, if the cache
load process touches the catalog (which will happen for many though not
all of these indexes), we are locking index before parent table, which can
result in a deadlock against processes that are trying to lock them in the
normal order. Per today's failure on buildfarm member gothic_moth; it's
surprising the problem hadn't been identified before.
Back-patch to 8.2. Earlier releases didn't have the issue because they
didn't try to lock these indexes during load (instead assuming that they
couldn't change schema at all during multiuser operation).
especially not ROLLBACK. ROLLBACK might need to be executed in an already
aborted transaction, when there is no safe way to revalidate the plan. But
in general there's no point in marking utility statements invalid, since
they have no plans in the normal sense of the word; so we might as well
work a bit harder here to avoid future revalidation cycles.
Back-patch to 8.4, where the bug was introduced.
occurring during a reload, such as query-cancel. Instead of zeroing out
an existing relcache entry and rebuilding it in place, build a new relcache
entry, then swap its contents with the old one, then free the new entry.
This avoids problems with code believing that a previously obtained pointer
to a cache entry must still reference a valid entry, as seen in recent
failures on buildfarm member jaguar. (jaguar is using CLOBBER_CACHE_ALWAYS
which raises the probability of failure substantially, but the problem
could occur in the field without that.) The previous design was okay
when it was made, but subtransactions and the ResourceOwner mechanism
make it unsafe now.
Also, make more use of the already existing rd_isvalid flag, so that we
remember that the entry requires rebuilding even if the first attempt fails.
Back-patch as far as 8.2. Prior versions have enough issues around relcache
reload anyway (due to inadequate locking) that fixing this one doesn't seem
worthwhile.
can upgrade clusters without renaming the tablespace directories. New
directory structure format is, e.g.:
$PGDATA/pg_tblspc/20981/PG_8.5_201001061/719849/83292814
deletion, so that we attempt to unlink the correct filepath. unlink()
errors are ignorable there, so lack of a DatabasePath initialization step
did not cause visible problems until a related bug showed up on Solaris.
Code refactored from xact_redo_commit() to
ProcessCommittedInvalidationMessages() in inval.c. Recovery may replay
shared invalidation messages for many databases, so we cannot
SetDatabasePath() once as we do in normal backends. Read the databaseid
from the shared invalidation messages, then set DatabasePath
temporarily before calling RelationCacheInitFileInvalidate().
Problem report by Robert Treat, analysis and fix by me.
Add missing varlena header to TableSpaceOpts structure. And, per
Tom Lane, instead of calling tablespace_reloptions in CacheMemoryContext,
call it in the caller's memory context and copy the value over
afterwards, to reduce the chances of a session-lifetime memory leak.
This patch only supports seq_page_cost and random_page_cost as parameters,
but it provides the infrastructure to scalably support many more.
In particular, we may want to add support for effective_io_concurrency,
but I'm leaving that as future work for now.
Thanks to Tom Lane for design help and Alvaro Herrera for the review.
pg_attribute, by having genbki.pl derive the information from the various
catalog header files. This greatly simplifies modification of the
"bootstrapped" catalogs.
This patch finally kills genbki.sh and Gen_fmgrtab.sh; we now rely entirely on
Perl scripts for those build steps. To avoid creating a Perl build dependency
where there was not one before, the output files generated by these scripts
are now treated as distprep targets, ie, they will be built and shipped in
tarballs. But you will need a reasonably modern Perl (probably at least
5.6) if you want to build from a CVS pull.
The changes to the MSVC build process are untested, and may well break ---
we'll soon find out from the buildfarm.
John Naylor, based on ideas from Robert Haas and others
"column < constant", and the comparison value is in the first or last
histogram bin or outside the histogram entirely, try to fetch the actual
column min or max value using an index scan (if there is an index on the
column). If successful, replace the lower or upper histogram bound with
that value before carrying on with the estimate. This limits the
estimation error caused by moving min/max values when the comparison
value is close to the min or max. Per a complaint from Josh Berkus.
It is tempting to consider using this mechanism for mergejoinscansel as well,
but that would inject index fetches into main-line join estimation not just
endpoint cases. I'm refraining from that until we can get a better handle
on the costs of doing this type of lookup.
and teach ANALYZE to compute such stats for tables that have subclasses.
Per my proposal of yesterday.
autovacuum still needs to be taught about running ANALYZE on parent tables
when their subclasses change, but the feature is useful even without that.
probably got there via blind copy-and-paste from one of the legitimate
callers, so rearrange and comment that code a bit to make it clearer that
this isn't a necessary prerequisite to hash_create. Per observation
from Robert Haas.
Enabled by recovery_connections = on (default) and forcing archive recovery using a recovery.conf. Recovery processing now emulates the original transactions as they are replayed, providing full locking and MVCC behaviour for read only queries. Recovery must enter consistent state before connections are allowed, so there is a delay, typically short, before connections succeed. Replay of recovering transactions can conflict and in some cases deadlock with queries during recovery; these result in query cancellation after max_standby_delay seconds have expired. Infrastructure changes have minor effects on normal running, though introduce four new types of WAL record.
New test mode "make standbycheck" allows regression tests of static command behaviour on a standby server while in recovery. Typical and extreme dynamic behaviours have been checked via code inspection and manual testing. Few port specific behaviours have been utilised, though primary testing has been on Linux only so far.
This commit is the basic patch. Additional changes will follow in this release to enhance some aspects of behaviour, notably improved handling of conflicts, deadlock detection and query cancellation. Changes to VACUUM FULL are also required.
Simon Riggs, with significant and lengthy review by Heikki Linnakangas, including streamlined redesign of snapshot creation and two-phase commit.
Important contributions from Florian Pflug, Mark Kirkwood, Merlin Moncure, Greg Stark, Gianni Ciolli, Gabriele Bartolini, Hannu Krosing, Robert Haas, Tatsuo Ishii, Hiroyuki Yamada plus support and feedback from many other community members.
support any indexable commutative operator, not just equality. Two rows
violate the exclusion constraint if "row1.col OP row2.col" is TRUE for
each of the columns in the constraint.
Jeff Davis, reviewed by Robert Haas
As proof of concept, modify plpgsql to use the hooks. plpgsql is still
inserting $n symbols textually, but the "back end" of the parsing process now
goes through the ParamRef hook instead of using a fixed parameter-type array,
and then execution only fetches actually-referenced parameters, using a hook
added to ParamListInfo.
Although there's a lot left to be done in plpgsql, this already cures the
"if (TG_OP = 'INSERT' and NEW.foo ...)" problem, as illustrated by the
changed regression test.
a lot of strange behaviors that occurred in join cases. We now identify the
"current" row for every joined relation in UPDATE, DELETE, and SELECT FOR
UPDATE/SHARE queries. If an EvalPlanQual recheck is necessary, we jam the
appropriate row into each scan node in the rechecking plan, forcing it to emit
only that one row. The former behavior could rescan the whole of each joined
relation for each recheck, which was terrible for performance, and what's much
worse could result in duplicated output tuples.
Also, the original implementation of EvalPlanQual could not re-use the recheck
execution tree --- it had to go through a full executor init and shutdown for
every row to be tested. To avoid this overhead, I've associated a special
runtime Param with each LockRows or ModifyTable plan node, and arranged to
make every scan node below such a node depend on that Param. Thus, by
signaling a change in that Param, the EPQ machinery can just rescan the
already-built test plan.
This patch also adds a prohibition on set-returning functions in the
targetlist of SELECT FOR UPDATE/SHARE. This is needed to avoid the
duplicate-output-tuple problem. It seems fairly reasonable since the
other restrictions on SELECT FOR UPDATE are meant to ensure that there
is a unique correspondence between source tuples and result tuples,
which an output SRF destroys as much as anything else does.
They are now handled by a new plan node type called ModifyTable, which is
placed at the top of the plan tree. In itself this change doesn't do much,
except perhaps make the handling of RETURNING lists and inherited UPDATEs a
tad less klugy. But it is necessary preparation for the intended extension of
allowing RETURNING queries inside WITH.
Marko Tiikkaja
the privileges that will be applied to subsequently-created objects.
Such adjustments are always per owning role, and can be restricted to objects
created in particular schemas too. A notable benefit is that users can
override the traditional default privilege settings, eg, the PUBLIC EXECUTE
privilege traditionally granted by default for functions.
Petr Jelinek
relation rowtype OID into the relcache entries it builds. This ensures
that catcache copies of the relation tupdescs will be fully correct.
While the deficiency doesn't seem to have any effect in the current
sources, we have been bitten by not-quite-right catcache tupdescs before,
so it seems like a good idea to maintain the rule that they should be right.
possibility of shared-inval messages causing a relcache flush while it tries
to fill in missing data in preloaded relcache entries. There are actually
two distinct failure modes here:
1. The flush could delete the next-to-be-processed cache entry, causing
the subsequent hash_seq_search calls to go off into the weeds. This is
the problem reported by Michael Brown, and I believe it also accounts
for bug #5074. The simplest fix is to restart the hashtable scan after
we've read any new data from the catalogs. It appears that pre-8.4
branches have not suffered from this failure, because by chance there were
no other catalogs sharing the same hash chains with the catalogs that
RelationCacheInitializePhase2 had work to do for. However that's obviously
pretty fragile, and it seems possible that derivative versions with
additional system catalogs might be vulnerable, so I'm back-patching this
part of the fix anyway.
2. The flush could delete the *current* cache entry, in which case the
pointer to the newly-loaded data would end up being stored into an
already-deleted Relation struct. As long as it was still deleted, the only
consequence would be some leaked space in CacheMemoryContext. But it seems
possible that the Relation struct could already have been recycled, in
which case this represents a hard-to-reproduce clobber of cached data
structures, with unforeseeable consequences. The fix here is to pin the
entry while we work on it.
In passing, also change RelationCacheInitializePhase2 to Assert that
formrdesc() set up the relation's cached TupleDesc (rd_att) with the
correct type OID and hasoids values. This is more appropriate than
silently updating the values, because the original tupdesc might already
have been copied into the catcache. However this part of the patch is
not in HEAD because it fails due to some questionable recent changes in
formrdesc :-(. That will be cleaned up in a subsequent patch.
To make this work in the base case, pg_database now has a nailed-in-cache
relation descriptor that is initialized using hardwired knowledge in
relcache.c. This means pg_database is added to the set of relations that
need to have a Schema_pg_xxx macro maintained in pg_attribute.h. When this
path is taken, we'll have to do a seqscan of pg_database to find the row
we need.
In the normal case, we are able to do an indexscan to find the database's row
by name. This is made possible by storing a global relcache init file that
describes only the shared catalogs and their indexes (and therefore is usable
by all backends in any database). A new backend loads this cache file,
finds its database OID after an indexscan on pg_database, and then loads
the local relcache init file for that database.
This change should effectively eliminate number of databases as a factor
in backend startup time, even with large numbers of databases. However,
the real reason for doing it is as a first step towards getting rid of
the flat files altogether. There are still several other sub-projects
to be tackled before that can happen.
The current implementation fires an AFTER ROW trigger for each tuple that
looks like it might be non-unique according to the index contents at the
time of insertion. This works well as long as there aren't many conflicts,
but won't scale to massive unique-key reassignments. Improving that case
is a TODO item.
Dean Rasheed
RevalidateCachedPlan. This is to avoid a "SPI_ERROR_CONNECT" failure when
the planner calls a SPI-using function and we are already inside one.
The alternative fix is to expect callers of RevalidateCachedPlan to do this,
which seems likely to result in additional hard-to-detect bugs of omission.
Per reports from Frank van Vugt and Marek Lewczuk.
Back-patch to 8.3. It's much harder to trigger the bug in 8.3, due to a
smaller set of cases in which plans can be invalidated, but it could happen.
(I think perhaps only a SI reset event could make 8.3 fail here, but that's
certainly within the realm of possibility.)
temp relations; this is no more expensive than before, now that we have
pg_class.relistemp. Insert tests into bufmgr.c to prevent attempting
to fetch pages from nonlocal temp relations. This provides a low-level
defense against bugs-of-omission allowing temp pages to be loaded into shared
buffers, as in the contrib/pgstattuple problem reported by Stuart Bishop.
While at it, tweak a bunch of places to use new relcache tests (instead of
expensive probes into pg_namespace) to detect local or nonlocal temp tables.
relations (including a temp table's indexes and toast table/index), and
false for normal relations. For ease of checking, this commit just adds
the column and fills it correctly --- revising the relation access machinery
to use it will come separately.
refactor the relcache code that used to do that. This allows other callers
(particularly autovacuum) to do the same without necessarily having to open
and lock a table.
field needs to be included in equalRuleLocks() comparisons, else updates
will fail to propagate into relcache entries when they have positive
reference count (ie someone is using the relcache entry).
Per report from Alex Hunsaker.
This doesn't do any remote or external things yet, but it gives modules
like plproxy and dblink a standardized and future-proof system for
managing their connection information.
Martin Pihlak and Peter Eisentraut
when they are invoked by the parser. We had been setting up a snapshot at
plan time but really it needs to be done earlier, before parse analysis.
Per report from Dmitry Koterov.
Also fix two related problems discovered while poking at this one:
exec_bind_message called datatype input functions without establishing a
snapshot, and SET CONSTRAINTS IMMEDIATE could call trigger functions without
establishing a snapshot.
Backpatch to 8.2. The underlying problem goes much further back, but it is
masked in 8.1 and before because we didn't attempt to invoke domain check
constraints within datatype input. It would only be exposed if a C-language
datatype input function used the snapshot; which evidently none do, or we'd
have heard complaints sooner. Since this code has changed a lot over time,
a back-patch is hardly risk-free, and so I'm disinclined to patch further
than absolutely necessary.
heap page, where a set bit indicates that all tuples on the page are
visible to all transactions, and the page therefore doesn't need
vacuuming. It is stored in a new relation fork.
Lazy vacuum uses the visibility map to skip pages that don't need
vacuuming. Vacuum is also responsible for setting the bits in the map.
In the future, this can hopefully be used to implement index-only-scans,
but we can't currently guarantee that the visibility map is always 100%
up-to-date.
In addition to the visibility map, there's a new PD_ALL_VISIBLE flag on
each heap page, also indicating that all tuples on the page are visible to
all transactions. It's important that this flag is kept up-to-date. It
is also used to skip visibility tests in sequential scans, which gives a
small performance gain on seqscans.
("there might be triggers") rather than an exact count. This is necessary
catalog infrastructure for the upcoming patch to reduce the strength of
locking needed for trigger addition/removal. Split out and committed
separately for ease of reviewing/testing.
In passing, also get rid of the unused pg_class columns relukeys, relfkeys,
and relrefs, which haven't been maintained in many years and now have no
chance of ever being maintained (because of wishing to avoid locking).
Simon Riggs
and heap_deformtuple in favor of the newer functions heap_form_tuple et al
(which do the same things but use bool control flags instead of arbitrary
char values). Eliminate the former duplicate coding of these functions,
reducing the deprecated functions to mere wrappers around the newer ones.
We can't get rid of them entirely because add-on modules probably still
contain many instances of the old coding style.
Kris Jurka
There are some unimplemented aspects: recursive queries must use UNION ALL
(should allow UNION too), and we don't have SEARCH or CYCLE clauses.
These might or might not get done for 8.4, but even without them it's a
pretty useful feature.
There are also a couple of small loose ends and definitional quibbles,
which I'll send a memo about to pgsql-hackers shortly. But let's land
the patch now so we can get on with other development.
Yoshiyuki Asaba, with lots of help from Tatsuo Ishii and Tom Lane
free space information is stored in a dedicated FSM relation fork, with each
relation (except for hash indexes; they don't use FSM).
This eliminates the max_fsm_relations and max_fsm_pages GUC options; remove any
trace of them from the backend, initdb, and documentation.
Rewrite contrib/pg_freespacemap to match the new FSM implementation. Also
introduce a new variant of the get_raw_page(regclass, int4, int4) function in
contrib/pageinspect that let's you to return pages from any relation fork, and
a new fsm_page_contents() function to inspect the new FSM pages.
