There were many calls to construct_array() and deconstruct_array() for
built-in types, for example, when dealing with system catalog columns.
These all hardcoded the type attributes necessary to pass to these
functions.
To simplify this a bit, add construct_array_builtin(),
deconstruct_array_builtin() as wrappers that centralize this hardcoded
knowledge. This simplifies many call sites and reduces the amount of
hardcoded stuff that is spread around.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/2914356f-9e5f-8c59-2995-5997fc48bcba%40enterprisedb.com
pg_start_backup() and pg_stop_backup() have been respectively renamed to
pg_backup_start() and pg_backup_stop() as of 39969e2, but a few comments
did not get the call.
Reviewed-by: Kyotaro Horiguchi, David Steele
Discussion: https://postgr.es/m/YrqGlj1+4DF3dbZ/@paquier.xyz
MemSet() with a value other than 0 just falls back to memset(), so the
indirection is unnecessary if the value is constant and not 0. Since
there is some interest in getting rid of MemSet(), this gets some easy
cases out of the way. (There are a few MemSet() calls that I didn't
change to maintain the consistency with their surrounding code.)
Discussion: https://www.postgresql.org/message-id/flat/CAEudQApCeq4JjW1BdnwU=m=-DvG5WyUik0Yfn3p6UNphiHjj+w@mail.gmail.com
When rebuilding the relation mapping on subscribers, we were not releasing
the attribute mapping's memory which was no longer required.
The attribute mapping used in logical tuple conversion was refactored in
PG13 (by commit e1551f96e6) but we forgot to update the related code that
frees the attribute map.
Author: Hou Zhijie
Reviewed-by: Amit Langote, Amit Kapila, Shi yu
Backpatch-through: 10, where it was introduced
Discussion: https://postgr.es/m/OSZPR01MB6310F46CD425A967E4AEF736FDA49@OSZPR01MB6310.jpnprd01.prod.outlook.com
We build the partition map entries on subscribers while applying the
changes for update/delete on partitions. The component relation in each
entry is closed after its use so we need to update it on successive use of
cache entries.
This problem was there since the original commit f1ac27bfda that
introduced this code but we didn't notice it till the recent commit
26b3455afa started to use the component relation of partition map cache
entry.
Reported-by: Tom Lane, as per buildfarm
Author: Amit Langote, Hou Zhijie
Reviewed-by: Amit Kapila, Shi Yu
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/OSZPR01MB6310F46CD425A967E4AEF736FDA49@OSZPR01MB6310.jpnprd01.prod.outlook.com
In logical replication, we will check if the target table on the
subscriber is updatable by comparing the replica identity of the table on
the publisher with the table on the subscriber. When the target table is a
partitioned table, we only check its replica identity but not for the
partition tables. This leads to assertion failure while applying changes
for update/delete as we expect those to succeed only when the
corresponding partition table has a primary key or has a replica
identity defined.
Fix it by checking the replica identity of the partition table while
applying changes.
Reported-by: Shi Yu
Author: Shi Yu, Hou Zhijie
Reviewed-by: Amit Langote, Amit Kapila
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/OSZPR01MB6310F46CD425A967E4AEF736FDA49@OSZPR01MB6310.jpnprd01.prod.outlook.com
We were not updating the partition map cache in the subscriber even when
the corresponding remote rel is changed. Due to this data was getting
incorrectly replicated for partition tables after the publisher has
changed the table schema.
Fix it by resetting the required entries in the partition map cache after
receiving a new relation mapping from the publisher.
Reported-by: Shi Yu
Author: Shi Yu, Hou Zhijie
Reviewed-by: Amit Langote, Amit Kapila
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/OSZPR01MB6310F46CD425A967E4AEF736FDA49@OSZPR01MB6310.jpnprd01.prod.outlook.com
While building a new attrmap which maps partition attribute numbers to
remoterel's, we incorrectly update the map for dropped column attributes.
Later, it caused cache look-up failure when we tried to use the map to
fetch the information about attributes.
This also fixes the partition map cache invalidation which was using the
wrong type cast to fetch the entry. We were using stale partition map
entry after invalidation which leads to the assertion or cache look-up
failure.
Reported-by: Shi Yu
Author: Hou Zhijie, Shi Yu
Reviewed-by: Amit Langote, Amit Kapila
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/OSZPR01MB6310F46CD425A967E4AEF736FDA49@OSZPR01MB6310.jpnprd01.prod.outlook.com
pg_stat_get_subscription scanned one more LogicalRepWorker array entry
than is really allocated. In the worst case this could lead to SIGSEGV,
if the LogicalRepCtx data structure is near the end of shared memory.
That seems quite unlikely though (thanks to the ordering of calls in
CreateSharedMemoryAndSemaphores) and we've heard no field reports of it.
A more likely misbehavior is one row of garbage data in the function's
result, but even that is not real likely because of the check that the
pid field matches some live backend.
Report and fix by Kuntal Ghosh. This bug is old, so back-patch
to all supported branches.
Discussion: https://postgr.es/m/CAGz5QCJykEDzW6jQK6Yz7Qh_PMtD=95de_7QoocbVR2Qy8hWZA@mail.gmail.com
Currently, we simply combine the column lists when publishing tables on
multiple publications and that can sometimes lead to unexpected behavior.
Say, if a column is published in any row-filtered publication, then the
values for that column are sent to the subscriber even for rows that don't
match the row filter, as long as the row matches the row filter for any
other publication, even if that other publication doesn't include the
column.
The main purpose of introducing a column list is to have statically
different shapes on publisher and subscriber or hide sensitive column
data. In both cases, it doesn't seem to make sense to combine column
lists.
So, we disallow the cases where the column list is different for the same
table when combining publications. It can be later extended to combine the
column lists for selective cases where required.
Reported-by: Alvaro Herrera
Author: Hou Zhijie
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/202204251548.mudq7jbqnh7r@alvherre.pgsql
Commit 923def9a53 and 52e4f0cd47 allowed to specify column lists and row
filters for publication tables. This commit extends the
pg_publication_tables view and pg_get_publication_tables function to
display that information.
This information will be useful to users and we also need this for the
later commit that prohibits combining multiple publications with different
column lists for the same table.
Author: Hou Zhijie
Reviewed By: Amit Kapila, Alvaro Herrera, Shi Yu, Takamichi Osumi
Discussion: https://postgr.es/m/202204251548.mudq7jbqnh7r@alvherre.pgsql
pgstat_report_stat() is only supposed to be called outside of transactions. In
5891c7a8ed I added a pgstat_report_stat() call into LogicalRepApplyLoop()'s
timeout branch. While not commonly reached inside a transaction, it is
reachable (e.g. due to network bottlenecks or the sender being stalled / slow
for some reason).
To fix, add a !IsTransactionState() check.
No test added because there's no easy way to reproduce this case without
patching the code.
Reported-By: Erik Rijkers <er@xs4all.nl>
Discussion: https://postgr.es/m/b3463b8c-2328-dcac-0136-af95715493c1@xs4all.nl
The problem is that we don't send keep-alive messages for a long time
while processing large transactions during logical replication where we
don't send any data of such transactions. This can happen when the table
modified in the transaction is not published or because all the changes
got filtered. We do try to send the keep_alive if necessary at the end of
the transaction (via WalSndWriteData()) but by that time the
subscriber-side can timeout and exit.
To fix this we try to send the keepalive message if required after
processing certain threshold of changes.
Reported-by: Fabrice Chapuis
Author: Wang wei and Amit Kapila
Reviewed By: Masahiko Sawada, Euler Taveira, Hou Zhijie, Hayato Kuroda
Backpatch-through: 10
Discussion: https://postgr.es/m/CAA5-nLARN7-3SLU_QUxfy510pmrYK6JJb=bk3hcgemAM_pAv+w@mail.gmail.com
ComputeXidHorizons (nee GetOldestXmin) thought that it could identify
walsenders by checking for proc->databaseId == 0. Perhaps that was
safe when the code was written, but it's been wrong at least since
autovacuum was invented. Background processes that aren't connected
to any particular database, such as the autovacuum launcher and
logical replication launcher, look like that too.
This imprecision is harmful because when such a process advertises an
xmin, the result is to hold back dead-tuple cleanup in all databases,
though it'd be sufficient to hold it back in shared catalogs (which
are the only relations such a process can access). Aside from being
generally inefficient, this has recently been seen to cause regression
test failures in the buildfarm, as a consequence of the logical
replication launcher's startup transaction preventing VACUUM from
marking pages of a user table as all-visible.
We only want that global hold-back effect for the case where a
walsender is advertising a hot standby feedback xmin. Therefore,
invent a new PGPROC flag that says that a process' xmin should be
considered globally, and check that instead of using the incorrect
databaseId == 0 test. Currently only a walsender sets that flag,
and only if it is not connected to any particular database. (This is
for bug-compatibility with the undocumented behavior of the existing
code, namely that feedback sent by a client who has connected to a
particular database would not be applied globally. I'm not sure this
is a great definition; however, such a client is capable of issuing
plain SQL commands, and I don't think we want xmins advertised for
such commands to be applied globally. Perhaps this could do with
refinement later.)
While at it, I rewrote the comment in ComputeXidHorizons, and
re-ordered the commented-upon if-tests, to make them match up
for intelligibility's sake.
This is arguably a back-patchable bug fix, but given the lack of
complaints I think it prudent to let it age awhile in HEAD first.
Discussion: https://postgr.es/m/1346227.1649887693@sss.pgh.pa.us
Compression option handling (level, algorithm or even workers) can be
used across several parts of the system and not only base backups.
Structures, objects and routines are renamed in consequence, to remove
the concept of base backups from this part of the code making this
change straight-forward.
pg_receivewal, that has gained support for LZ4 since babbbb5, will make
use of this infrastructure for its set of compression options, bringing
more consistency with pg_basebackup. This cleanup needs to be done
before releasing a beta of 15. pg_dump is a potential future target, as
well, and adding more compression options to it may happen in 16~.
Author: Michael Paquier
Reviewed-by: Robert Haas, Georgios Kokolatos
Discussion: https://postgr.es/m/YlPQGNAAa04raObK@paquier.xyz
Allow extensions to specify a new custom resource manager (rmgr),
which allows specialized WAL. This is meant to be used by a Table
Access Method or Index Access Method.
Prior to this commit, only Generic WAL was available, which offers
support for recovery and physical replication but not logical
replication.
Reviewed-by: Julien Rouhaud, Bharath Rupireddy, Andres Freund
Discussion: https://postgr.es/m/ed1fb2e22d15d3563ae0eb610f7b61bb15999c0a.camel%40j-davis.com
Previously the statistics collector received statistics updates via UDP and
shared statistics data by writing them out to temporary files regularly. These
files can reach tens of megabytes and are written out up to twice a
second. This has repeatedly prevented us from adding additional useful
statistics.
Now statistics are stored in shared memory. Statistics for variable-numbered
objects are stored in a dshash hashtable (backed by dynamic shared
memory). Fixed-numbered stats are stored in plain shared memory.
The header for pgstat.c contains an overview of the architecture.
The stats collector is not needed anymore, remove it.
By utilizing the transactional statistics drop infrastructure introduced in a
prior commit statistics entries cannot "leak" anymore. Previously leaked
statistics were dropped by pgstat_vacuum_stat(), called from [auto-]vacuum. On
systems with many small relations pgstat_vacuum_stat() could be quite
expensive.
Now that replicas drop statistics entries for dropped objects, it is not
necessary anymore to reset stats when starting from a cleanly shut down
replica.
Subsequent commits will perform some further code cleanup, adapt docs and add
tests.
Bumps PGSTAT_FILE_FORMAT_ID.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: "David G. Johnston" <david.g.johnston@gmail.com>
Reviewed-By: Tomas Vondra <tomas.vondra@2ndquadrant.com> (in a much earlier version)
Reviewed-By: Arthur Zakirov <a.zakirov@postgrespro.ru> (in a much earlier version)
Reviewed-By: Antonin Houska <ah@cybertec.at> (in a much earlier version)
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Discussion: https://postgr.es/m/20220308205351.2xcn6k4x5yivcxyd@alap3.anarazel.de
Discussion: https://postgr.es/m/20210319235115.y3wz7hpnnrshdyv6@alap3.anarazel.de
Previously the pgstat <-> replication slots API was done with on the basis of
names. However, the upcoming move to storing stats in shared memory makes it
more convenient to use a integer as key.
Change the replication slot functions to take the slot rather than the slot
name, and expose ReplicationSlotIndex() to compute the index of an replication
slot. Special handling will be required for restarts, as the index is not
stable across restarts. For now pgstat internally still uses names.
Rename pgstat_report_replslot_{create,drop}() to
pgstat_{create,drop}_replslot() to match the functions for other kinds of
stats.
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220404041516.cctrvpadhuriawlq@alap3.anarazel.de
Exclusive-mode backups have been deprecated since 9.6 (when
non-exclusive backups were introduced) due to the issues
they can cause should the system crash while one is running and
generally because non-exclusive provides a much better interface.
Further, exclusive backup mode wasn't really being tested (nor was most
of the related code- like being able to log in just to stop an exclusive
backup and the bits of the state machine related to that) and having to
possibly deal with an exclusive backup and the backup_label file
existing during pg_basebackup, pg_rewind, etc, added other complexities
that we are better off without.
This patch removes the exclusive backup mode, the various special cases
for dealing with it, and greatly simplifies the online backup code and
documentation.
Authors: David Steele, Nathan Bossart
Reviewed-by: Chapman Flack
Discussion: https://postgr.es/m/ac7339ca-3718-3c93-929f-99e725d1172c@pgmasters.nethttps://postgr.es/m/CAHg+QDfiM+WU61tF6=nPZocMZvHDzCK47Kneyb0ZRULYzV5sKQ@mail.gmail.com
Here we make a series of improvements to the generation memory
allocator, namely:
1. Allow generation contexts to have a minimum, initial and maximum block
sizes. The standard allocator allows this already but when the generation
context was added, it only allowed fixed-sized blocks. The problem with
fixed-sized blocks is that it's difficult to choose how large to make the
blocks. If the chosen size is too small then we'd end up with a large
number of blocks and a large number of malloc calls. If the block size is
made too large, then memory is wasted.
2. Add support for "keeper" blocks. This is a special block that is
allocated along with the context itself but is never freed. Instead,
when the last chunk in the keeper block is freed, we simply mark the block
as empty to allow new allocations to make use of it.
3. Add facility to "recycle" newly empty blocks instead of freeing them
and having to later malloc an entire new block again. We do this by
recording a single GenerationBlock which has become empty of any chunks.
When we run out of space in the current block, we check to see if there is
a "freeblock" and use that if it contains enough space for the allocation.
Author: David Rowley, Tomas Vondra
Reviewed-by: Andy Fan
Discussion: https://postgr.es/m/d987fd54-01f8-0f73-af6c-519f799a0ab8@enterprisedb.com
libzstd allows transparent parallel compression just by setting
an option when creating the compression context, so permit that
for both client and server-side backup compression. To use this,
use something like pg_basebackup --compress WHERE-zstd:workers=N
where WHERE is "client" or "server" and N is an integer.
When compression is performed on the server side, this will spawn
threads inside the PostgreSQL backend. While there is almost no
PostgreSQL server code which is thread-safe, the threads here are used
internally by libzstd and touch only data structures controlled by
libzstd.
Patch by me, based in part on earlier work by Dipesh Pandit
and Jeevan Ladhe. Reviewed by Justin Pryzby.
Discussion: http://postgr.es/m/CA+Tgmobj6u-nWF-j=FemygUhobhryLxf9h-wJN7W-2rSsseHNA@mail.gmail.com
The current logical replication behavior is to send every transaction to
subscriber even if the transaction is empty. This can happen because
transaction doesn't contain changes from the selected publications or all
the changes got filtered. It is a waste of CPU cycles and network
bandwidth to build/transmit these empty transactions.
This patch addresses the above problem by postponing the BEGIN message
until the first change is sent. While processing a COMMIT message, if
there was no other change for that transaction, do not send the COMMIT
message. This allows us to skip sending BEGIN/COMMIT messages for empty
transactions.
When skipping empty transactions in synchronous replication mode, we send
a keepalive message to avoid delaying such transactions.
Author: Ajin Cherian, Hou Zhijie, Euler Taveira
Reviewed-by: Peter Smith, Takamichi Osumi, Shi Yu, Masahiko Sawada, Greg Nancarrow, Vignesh C, Amit Kapila
Discussion: https://postgr.es/m/CAMkU=1yohp9-dv48FLoSPrMqYEyyS5ZWkaZGD41RJr10xiNo_Q@mail.gmail.com
Generally if a role is granted membership to another role with NOINHERIT
they must use SET ROLE to access the privileges of that role, however
with predefined roles the membership and privilege is conflated. Fix that
by replacing is_member_of_role with has_privs_for_role for predefined
roles. Patch does not remove is_member_of_role from acl.h, but it does
add a warning not to use that function for privilege checking. Not
backpatched based on hackers list discussion.
Author: Joshua Brindle
Reviewed-by: Stephen Frost, Nathan Bossart, Joe Conway
Discussion: https://postgr.es/m/flat/CAGB+Vh4Zv_TvKt2tv3QNS6tUM_F_9icmuj0zjywwcgVi4PAhFA@mail.gmail.com
When we try to set the zstd compression level either on the client
or on the server, check for errors.
For any algorithm, on the client side, don't try to set the compression
level unless the user specified one. This was visibly broken for
zstd, which managed to set -1 rather than 0 in this case, but tidy
up the code for the other methods, too.
On the client side, if we fail to create a ZSTD_CCtx, exit after
reporting the error. Otherwise we'll dereference a null pointer.
Patch by me, reviewed by Dipesh Pandit.
Discussion: http://postgr.es/m/CA+TgmoZK3zLQUCGi1h4XZw4jHiAWtcACc+GsdJR1_Mc19jUjXA@mail.gmail.com
So far the first of the retries introduced in f28bf667f6 resolves the
issue. But I (Andres) am still suspicious that the start of the failures might
indicate a problem.
To reduce noise, stop reporting a failure if a retry resolves the problem. To
allow figuring out what causes the slow slot drop, add a few more debug
messages to ReplicationSlotDropPtr.
See also commit afdeff1052, fe0972ee5e and f28bf667f6.
Discussion: https://postgr.es/m/20220327213219.smdvfkq2fl74flow@alap3.anarazel.de
This allows specifying an optional column list when adding a table to
logical replication. The column list may be specified after the table
name, enclosed in parentheses. Columns not included in this list are not
sent to the subscriber, allowing the schema on the subscriber to be a
subset of the publisher schema.
For UPDATE/DELETE publications, the column list needs to cover all
REPLICA IDENTITY columns. For INSERT publications, the column list is
arbitrary and may omit some REPLICA IDENTITY columns. Furthermore, if
the table uses REPLICA IDENTITY FULL, column list is not allowed.
The column list can contain only simple column references. Complex
expressions, function calls etc. are not allowed. This restriction could
be relaxed in the future.
During the initial table synchronization, only columns included in the
column list are copied to the subscriber. If the subscription has
several publications, containing the same table with different column
lists, columns specified in any of the lists will be copied.
This means all columns are replicated if the table has no column list
at all (which is treated as column list with all columns), or when of
the publications is defined as FOR ALL TABLES (possibly IN SCHEMA that
matches the schema of the table).
For partitioned tables, publish_via_partition_root determines whether
the column list for the root or the leaf relation will be used. If the
parameter is 'false' (the default), the list defined for the leaf
relation is used. Otherwise, the column list for the root partition
will be used.
Psql commands \dRp+ and \d <table-name> now display any column lists.
Author: Tomas Vondra, Alvaro Herrera, Rahila Syed
Reviewed-by: Peter Eisentraut, Alvaro Herrera, Vignesh C, Ibrar Ahmed,
Amit Kapila, Hou zj, Peter Smith, Wang wei, Tang, Shi yu
Discussion: https://postgr.es/m/CAH2L28vddB_NFdRVpuyRBJEBWjz4BSyTB=_ektNRH8NJ1jf95g@mail.gmail.com
This commit adds support for decoding of sequences to the built-in
replication (the infrastructure was added by commit 0da92dc530).
The syntax and behavior mostly mimics handling of tables, i.e. a
publication may be defined as FOR ALL SEQUENCES (replicating all
sequences in a database), FOR ALL SEQUENCES IN SCHEMA (replicating
all sequences in a particular schema) or individual sequences.
To publish sequence modifications, the publication has to include
'sequence' action. The protocol is extended with a new message,
describing sequence increments.
A new system view pg_publication_sequences lists all the sequences
added to a publication, both directly and indirectly. Various psql
commands (\d and \dRp) are improved to also display publications
including a given sequence, or sequences included in a publication.
Author: Tomas Vondra, Cary Huang
Reviewed-by: Peter Eisentraut, Amit Kapila, Hannu Krosing, Andres
Freund, Petr Jelinek
Discussion: https://postgr.es/m/d045f3c2-6cfb-06d3-5540-e63c320df8bc@enterprisedb.com
Discussion: https://postgr.es/m/1710ed7e13b.cd7177461430746.3372264562543607781@highgo.ca
Commit ffd53659c4 messed up the
mechanism that was being used to pass parameters to LogStreamerMain()
on Windows. It worked on Linux because only Windows was using threads.
Repair by moving the additional parameters added by that commit into
the 'logstreamer_param' struct.
Along the way, fix a compiler warning on builds without HAVE_LIBZ.
Discussion: http://postgr.es/m/CA+TgmoY5=AmWOtMj3v+cySP2rR=Bt6EGyF_joAq4CfczMddKtw@mail.gmail.com
