Not only did this test fail to test what it was supposed to test, but it
left a user definition lying around, which caused subsequent runs of the
regression tests to fail.
This tells you what fraction of NOTIFY's queue is currently filled.
Brendan Jurd, reviewed by Merlin Moncure and Gurjeet Singh. A few
further tweaks by me.
xlc provides "long long" unconditionally at C99-compatible language
levels, and this option provokes a warning. The warning interferes with
"configure" tests that fail in response to any warning. Notably, before
commit 85a2a8903f, it interfered with the
test for -qnoansialias. Back-patch to 9.0 (all supported versions).
It's standard for quicksort implementations, after having partitioned the
input into two subgroups, to recurse to process the smaller partition and
then handle the larger partition by iterating. This method guarantees
that no more than log2(N) levels of recursion can be needed. However,
Bentley and McIlroy argued that checking to see which partition is smaller
isn't worth the cycles, and so their code doesn't do that but just always
recurses on the left partition. In most cases that's fine; but with
worst-case input we might need O(N) levels of recursion, and that means
that qsort could be driven to stack overflow. Such an overflow seems to
be the only explanation for today's report from Yiqing Jin of a SIGSEGV
in med3_tuple while creating an index of a couple billion entries with a
very large maintenance_work_mem setting. Therefore, let's spend the few
additional cycles and lines of code needed to choose the smaller partition
for recursion.
Also, fix up the qsort code so that it properly uses size_t not int for
some intermediate values representing numbers of items. This would only
be a live risk when sorting more than INT_MAX bytes (in qsort/qsort_arg)
or tuples (in qsort_tuple), which I believe would never happen with any
caller in the current core code --- but perhaps it could happen with
call sites in third-party modules? In any case, this is trouble waiting
to happen, and the corrected code is probably if anything shorter and
faster than before, since it removes sign-extension steps that had to
happen when converting between int and size_t.
In passing, move a couple of CHECK_FOR_INTERRUPTS() calls so that it's
not necessary to preserve the value of "r" across them, and prettify
the output of gen_qsort_tuple.pl a little.
Back-patch to all supported branches. The odds of hitting this issue
are probably higher in 9.4 and up than before, due to the new ability
to allocate sort workspaces exceeding 1GB, but there's no good reason
to believe that it's impossible to crash older branches this way.
The result closely resembles linking of these modules for the "win32"
port. Augment the $(exports_file) header so the file is also usable as
an import file. Unfortunately, relocating an AIX installation will now
require adding $(pkglibdir) to LD_LIBRARY_PATH. Back-patch to 9.5,
where the modules were introduced.
This allows PostgreSQL modules and their dependencies to have undefined
symbols, resolved at runtime. Perl module shared objects rely on that
in Perl 5.8.0 and later. This fixes the crash when PL/PerlU loads such
modules, as the hstore_plperl test suite does. Module authors can link
using -Wl,-G to permit undefined symbols; by default, linking will fail
as it has. Back-patch to 9.0 (all supported versions).
Other options cannot be changed, as it's not totally clear if cached plans
would need to be invalidated if one of the other options change. Selectivity
estimator functions only change plan costs, not correctness of plans, so
those should be safe.
Original patch by Uriy Zhuravlev, heavily edited by me.
In the test query I added for ALTER TABLE retaining comments, the order of
the result rows was not stable, and varied across systems. Add an ORDER BY
to make the order predictable. This should fix the buildfarm failures.
When a column's datatype is changed, ATExecAlterColumnType() rebuilds all
the affected indexes and constraints, and the comments from the old
indexes/constraints were not carried over.
To fix, create a synthetic COMMENT ON command in the work queue, to re-add
any comments on constraints. For indexes, there's a comment field in
IndexStmt that is used.
This fixes bug #13126, reported by Kirill Simonov. Original patch by
Michael Paquier, reviewed by Petr Jelinek and me. This bug is present in
all versions, but only backpatch to 9.5. Given how minor the issue is, it
doesn't seem worth the work and risk to backpatch further than that.
The code in ATPostAlterTypeParse was very deeply indented, mostly because
there were two nested switch-case statements, which add a lot of
indentation. Use if-else blocks instead, to make the code less indented
and more readable.
This is in preparation for next patch that makes some actualy changes to
the function. These cosmetic parts have been separated to make it easier
to see the real changes in the other patch.
Per Coverity (not that any of these are so non-obvious that they should not
have been caught before commit). The extent of leakage is probably minor
to unnoticeable, but a leak is a leak. Back-patch as necessary.
Michael Paquier
pg_receivexlog and pg_recvlogical error out when --create-slot is
specified and a slot with the same name already exists. In some cases,
especially with pg_receivexlog, that's rather annoying and requires
additional scripting.
Backpatch to 9.5 as slot control functions have newly been added to
pg_receivexlog, and there doesn't seem much point leaving it in a less
useful state.
Discussion: 20150619144755.GG29350@alap3.anarazel.de
As noted by Noah Misch, CreatePolicy() and AlterPolicy() omit to call
assign_expr_collations() on the node trees. Fix the omission and add
his test case to the rowsecurity regression test.
Ordinarily, a failure (unexpected exit status) of the startup subprocess
should be considered fatal, so the postmaster should just close up shop
and quit. However, if we sent the startup process a SIGQUIT or SIGKILL
signal, the failure is hardly "unexpected", and we should attempt restart;
this is necessary for recovery from ordinary backend crashes in hot-standby
scenarios. I attempted to implement the latter rule with a two-line patch
in commit 442231d7f7, but it now emerges that
that patch was a few bricks shy of a load: it failed to distinguish the
case of a signaled startup process from the case where the new startup
process crashes before reaching database consistency. That resulted in
infinitely respawning a new startup process only to have it crash again.
To handle this properly, we really must track whether we have sent the
*current* startup process a kill signal. Rather than add yet another
ad-hoc boolean to the postmaster's state, I chose to unify this with the
existing RecoveryError flag into an enum tracking the startup process's
state. That seems more consistent with the postmaster's general state
machine design.
Back-patch to 9.0, like the previous patch.
When enabling wal_compression, there is a risk to leak data similarly to
the BREACH and CRIME attacks on SSL where the compression ratio of
a full page image gives a hint of what is the existing data of this page.
This vulnerability is quite cumbersome to exploit in practice, but doable.
So this patch makes wal_compression PGC_SUSET in order to prevent
non-superusers from enabling it and exploiting the vulnerability while
DBA thinks the risk very seriously and disables it in postgresql.conf.
Back-patch to 9.5 where wal_compression was introduced.
Create a log file for each test run. Stdout and stderr of the test script,
as well as any subprocesses run as part of the test, are redirected to
the log file. This makes it a lot easier to debug test failures. Also print
the test output (ok 12 - ... messages) to the log file, and the command
line of any external programs executed with the system_or_bail and run_log
functions. This makes it a lot easier to debug failing tests.
Modify some of the pg_ctl and other command invocations to not use 'silent'
or 'quiet' options, and don't redirect output to /dev/null, so that you get
all the information in the log instead.
In the passing, construct some command lines in a way that works if $tempdir
contains quote-characters. I haven't systematically gone through all of
them or tested that, so I don't know if this is enough to make that work.
pg_rewind tests had a custom mechanism for creating a similar log file. Use
the new generic facility instead.
Michael Paquier and me.
This formalizes a decision implicit in commit
4ea51cdfe8 and adds clean detection of
affected systems. Vendor updates are available for each such known bug.
Back-patch to 9.5, where the aforementioned commit first appeared.
POSIX does not specify the -q option, and many implementations do not
offer it. Don't bother changing the MSVC build system, because having
non-GNU diff on Windows is vanishingly unlikely. Back-patch to 9.2,
where this invocation was introduced.
The psql crash happened when no current connection existed. (The second
new check is optional given today's undocumented NULL argument handling
in PQhost() etc.) Back-patch to 9.0 (all supported versions).
Test the interactions with permissions and LOCK TABLE. Specifically
ROW EXCLUSIVE, ACCESS SHARE, and ACCESS EXCLUSIVE modes against
SELECT, INSERT, UPDATE, DELETE, and TRUNCATE permissions. Discussed
by Stephen Frost and Michael Paquier, patch by the latter. Backpatch
to 9.5 where matching behavior was first committed.
SUSv2-era shells don't set the PWD variable, though anything more modern
does. In the buildfarm environment this could lead to test.sh executing
with PWD pointing to $HOME or another high-level directory, so that there
were conflicts between concurrent executions of the test in different
branch subdirectories. This appears to be the explanation for recent
intermittent failures on buildfarm members binturong and dingo (and might
well have something to do with the buildfarm script's failure to capture
log files from pg_upgrade tests, too).
To fix, just use `pwd` in place of $PWD. AFAICS test.sh is the only place
in our source tree that depended on $PWD. Back-patch to all versions
containing this script.
Per buildfarm. Thanks to Oskari Saarenmaa for diagnosing the problem.
If an allocation fails in the main message handling loop, pqParseInput3
or pqParseInput2, it should not be treated as "not enough data available
yet". Otherwise libpq will wait indefinitely for more data to arrive from
the server, and gets stuck forever.
This isn't a complete fix - getParamDescriptions and getCopyStart still
have the same issue, but it's a step in the right direction.
Michael Paquier and me. Backpatch to all supported versions.
When spilling transaction data to disk a simple typo caused the output
file to be closed and reopened for every serialized change. That happens
to not have a huge impact on linux, which is why it probably wasn't
noticed so far, but on windows that appears to trigger actual disk
writes after every change. Not fun.
The bug fortunately does not have any impact besides speed. A change
could end up being in the wrong segment (last instead of next), but
since we read all files to the end, that's just ugly, not really
problematic. It's not a problem to upgrade, since transaction spill
files do not persist across restarts.
Bug: #13484
Reported-By: Olivier Gosseaume
Discussion: 20150703090217.1190.63940@wrigleys.postgresql.org
Backpatch to 9.4, where logical decoding was added.
The previous coding tried to handle possible failures when fsyncing a
tty or pipe fd by accepting EINVAL - but apparently some
platforms (windows, OSX) don't reliably return that. So instead check
whether the output fd refers to a pipe or a tty when opening it.
Reported-By: Olivier Gosseaume, Marko Tiikkaja
Discussion: 559AF98B.3050901@joh.to
Backpatch to 9.4, where pg_recvlogical was added.
Build.bat and vcregress.bat got similar treatment years ago. I'm not sure
why install.bat wasn't treated at the same time, but it seems like a good
idea anyway.
The immediate problem with the old install.bat was that it had quoting
issues, and wouldn't work if the target directory's name contained spaces.
This fixes that problem.
We're interested in the buffer size of the socket that's connected to the
client, not the one that's listening for new connections. It happened to
work, as default buffer size is the same on both, but it was clearly not
wrong.
Spotted by Tom Lane
It's unnecessary to set it if the default is higher in the first place.
Furthermore, setting SO_SNDBUF disables the so-called "dynamic send
buffering" feature, which hurts performance further. This can be seen
especially when the network between the client and the server has high
latency.
Chen Huajun
This builds on commit 21dcda2713 by keeping
a plpgsql function's shared ParamListInfo's entries for simple variables
(PLPGSQL_DTYPE_VARs) valid at all times. That adds a few cycles to each
assignment to such variables, but saves significantly more cycles each time
they are used; so except in the pathological case of many dead stores, this
should always be a win. Initial testing says it's good for about a 10%
speedup of simple calculations; more in large functions with many datums.
We can't use this method for row/record references unfortunately, so what
we do for those is reset those ParamListInfo slots after use; which we
can skip doing unless some of them were actually evaluated during the
previous evaluation call. So this should frequently be a win as well,
while worst case is that it's similar cost to the previous approach.
Also, closer study suggests that the previous method of instantiating a
new ParamListInfo array per evaluation is actually probably optimal for
cursor-opening executor calls. The reason is that whatever is visible in
the array is going to get copied into the cursor portal via copyParamList.
So if we used the function's main ParamListInfo for those calls, we'd end
up with all of its DTYPE_VAR vars getting copied, which might well include
large pass-by-reference values that the cursor actually has no need for.
To avoid a possible net degradation in cursor cases, go back to creating
and filling a private ParamListInfo in those cases (which therefore will be
exactly the same speed as before 21dcda2713). We still get some benefit
out of this though, because this approach means that we only have to defend
against copyParamList's try-to-fetch-every-slot behavior in the case of an
unshared ParamListInfo; so plpgsql_param_fetch() can skip testing
expr->paramnos in the common case.
To ensure that the main ParamListInfo's image of a DTYPE_VAR datum is
always valid, all assignments to such variables are now funneled through
assign_simple_var(). But this makes for cleaner and shorter code anyway.
You can no longer use pgbench with multiple threads when compiled without
--enable-thread-safety. That's an acceptable limitation these days; it
still works fine with -j1, and all modern platforms support threads anyway.
This makes future maintenance and development of the code easier.
Fabien Coelho
There were two issues here. First, if a query got stuck so that it took
e.g. 5 seconds, and progress interval was 1 second, no progress reports were
printed until the query returned. Fix so that we wake up specifically to
print the progress report. Secondly, if pgbench got stuck so that it would
nevertheless not print a progress report on time, and enough time passes
that it's already time to print the next progress report, just skip the one
that was missed. Before this patch, it would print the missed one with 0 TPS
immediately after the previous one.
Fabien Coelho. Backpatch to 9.4, where progress reports were added.
