Give the correct name of the GUC parameter being complained of.
Also, emit a more suitable SQLSTATE (INVALID_PARAMETER_VALUE,
not the default INTERNAL_ERROR).
Gurjeet Singh, errcode adjustment by me
The cascading replication code assumed that the current RecoveryTargetTLI
never changes, but that's not true with recovery_target_timeline='latest'.
The obvious upshot of that is that RecoveryTargetTLI in shared memory needs
to be protected by a lock. A less obvious consequence is that when a
cascading standby is connected, and the standby switches to a new target
timeline after scanning the archive, it will continue to stream WAL to the
cascading standby, but from a wrong file, ie. the file of the previous
timeline. For example, if the standby is currently streaming from the middle
of file 000000010000000000000005, and the timeline changes, the standby
will continue to stream from that file. However, the WAL on the new
timeline is in file 000000020000000000000005, so the standby sends garbage
from 000000010000000000000005 to the cascading standby, instead of the
correct WAL from file 000000020000000000000005.
This also fixes a related bug where a partial WAL segment is restored from
the archive and streamed to a cascading standby. The code assumed that when
a WAL segment is copied from the archive, it can immediately be fully
streamed to a cascading standby. However, if the segment is only partially
filled, ie. has the right size, but only N first bytes contain valid WAL,
that's not safe. That can happen if a partial WAL segment is manually copied
to the archive, or if a partial WAL segment is archived because a server is
started up on a new timeline within that segment. The cascading standby will
get confused if the WAL it received is not valid, and will get stuck until
it's restarted. This patch fixes that problem by not allowing WAL restored
from the archive to be streamed to a cascading standby until it's been
replayed, and thus validated.
This gets rid of a dangerous-looking use of the not-volatile XLogCtl
pointer in a couple of spinlock-protected sections, where the normal
coding rule is that you should only access shared memory through a
pointer-to-volatile. I think the risk is only hypothetical not actual,
since for there to be a bug the compiler would have to move the spinlock
acquire or release across the memcpy() call, which one sincerely hopes
it will not. Still, it looks cleaner this way.
Per comment from Daniel Farina and subsequent discussion.
This is mostly cosmetic, but it does eliminate a speculative portability
issue. The previous coding ignored the fact that sum_grow could easily
overflow (in fact, it could be summing multiple IEEE float infinities).
On a platform where that didn't guarantee to produce a positive result,
the code would misbehave. In any case, it was less than readable.
This reduces unnecessary exposure of other headers through htup.h, which
is very widely included by many files.
I have chosen to move the function prototypes to the new file as well,
because that means htup.h no longer needs to include tupdesc.h. In
itself this doesn't have much effect in indirect inclusion of tupdesc.h
throughout the tree, because it's also required by execnodes.h; but it's
something to explore in the future, and it seemed best to do the htup.h
change now while I'm busy with it.
Every time the best-tuple-found-so-far changes, we need to reset all
the penalty values in which_grow[] to the penalties for the new best
tuple. The old code failed to do this, resulting in inferior index
quality.
The original patch from Alexander Korotkov was just two lines; I took
the liberty of fleshing that out by adding a bunch of comments that I
hope will make this logic easier for others to understand than it was
for me.
This includes two micro-optimizations to the tight inner loop in descending
the SP-GiST tree: 1. avoid an extra function call to index_getprocinfo when
calling user-defined choose function, and 2. avoid a useless palloc+pfree
when node labels are not used.
The heapam XLog functions are used by other modules, not all of which
are interested in the rest of the heapam API. With this, we let them
get just the XLog stuff in which they are interested and not pollute
them with unrelated includes.
Also, since heapam.h no longer requires xlog.h, many files that do
include heapam.h no longer get xlog.h automatically, including a few
headers. This is useful because heapam.h is getting pulled in by
execnodes.h, which is in turn included by a lot of files.
This improves on commit 51fed14d73ed3acd2282b531fb1396877e44e86a by
eliminating the assumption that we can form <some pointer value> +
<some offset> without overflow. The entire point of those tests is that
we don't trust the offset value, so coding them in a way that could wrap
around if the buffer happens to be near the top of memory doesn't seem
sound. Instead, track the remaining space as a size_t variable and
compare offsets against that.
Also, improve comment about why we need the extra early check on
xl_tot_len.
If a WAL record header was split across pages, but xl_tot_len was 0, we
would get confused and conclude that we had already read the whole record,
and proceed to CRC check it. That can lead to a crash in RecordIsValid(),
which isn't careful to not read beyond end-of-record, as defined by
xl_tot_len.
Add an explicit sanity check for xl_tot_len <= SizeOfXlogRecord. Also,
make RecordIsValid() more robust by checking in each step that it doesn't
try to access memory beyond end of record, even if a length field in the
record's or a backup block's header is bogus.
Per report and analysis by Tom Lane.
We use a hash table to track the parents of inner pages, but when inserting
to a leaf page, the caller of gistbufferinginserttuples() must pass a
correct block number of the leaf's parent page. Before gistProcessItup()
descends to a child page, it checks if the downlink needs to be adjusted to
accommodate the new tuple, and updates the downlink if necessary. However,
updating the downlink might require splitting the page, which might move the
downlink to a page to the right. gistProcessItup() doesn't realize that, so
when it descends to the leaf page, it might pass an out-of-date parent block
number as a result. Fix that by returning the block a tuple was inserted to
from gistbufferinginserttuples().
This fixes the bug reported by Zdeněk Jílovec.
Cascading replication copied the incoming file into pg_xlog but
didn't set path correctly, so the first attempt to open file failed
causing it to loop around and look for file in pg_xlog. So the
earlier coding worked, but accidentally rather than by design.
Spotted by Fujii Masao, fix by Fujii Masao and Simon Riggs
This was broken in commit ed0b409d22346b1b027a4c2099ca66984d94b6dd,
which revised the GlobalTransactionData struct to not include the
associated PGPROC as its first member, but overlooked one place where
a cast was used in reliance on that equivalence.
The most effective way of fixing this seems to be to create a new function
that looks up the GlobalTransactionData struct given the XID, and make
both TwoPhaseGetDummyBackendId and TwoPhaseGetDummyProc rely on that.
Per report from Robert Ross.
As noted by Noah Misch, btree_xlog_delete_get_latestRemovedXid is
critically dependent on the assumption that it's examining a consistent
state of the database. This was undocumented though, so the
seemingly-unrelated check for no active HS sessions might be thought to be
merely an optional optimization. Improve comments, and add an explicit
check of reachedConsistency just to be sure.
This function returns InvalidTransactionId (thereby killing all HS
transactions) in several cases that are not nearly unlikely enough for my
taste. This commit doesn't attempt to fix those deficiencies, just
document them.
Back-patch to 9.2, not from any real functional need but just to keep the
branches more closely synced to simplify possible future back-patching.
In yesterday's commit 962e0cc71e839c58fb9125fa85511b8bbb8bdbee, I added the
ResolveRecoveryConflictWithSnapshot call in the wrong place. I correctly
put it before spgRedoVacuumRedirect itself would modify the index page ---
but not before RestoreBkpBlocks, so replay of a record with a full-page
image would modify the page before kicking off any conflicting HS
transactions. Oops.
The correct test for whether a redirection tuple is removable is whether
tuple's xid < RecentGlobalXmin, not OldestXmin; the previous coding
failed to protect index searches being done in concurrent transactions that
have no XID. This mirrors the recent fix in btree's page recycling logic
made in commit d3abbbebe52eb1e59e621c880ad57df9d40d13f2.
Also, WAL-log the newest XID of any removed redirection tuple on an index
page, and apply ResolveRecoveryConflictWithSnapshot during InHotStandby WAL
replay. This protects against concurrent Hot Standby transactions possibly
needing to see the redirection tuple(s).
Per my query of 2012-03-12 and subsequent discussion.
mdinit() was misusing IsBootstrapProcessingMode() to decide whether to
create an fsync pending-operations table in the current process. This led
to creating a table not only in the startup and checkpointer processes as
intended, but also in the bgwriter process, not to mention other auxiliary
processes such as walwriter and walreceiver. Creation of the table in the
bgwriter is fatal, because it absorbs fsync requests that should have gone
to the checkpointer; instead they just sit in bgwriter local memory and are
never acted on. So writes performed by the bgwriter were not being fsync'd
which could result in data loss after an OS crash. I think there is no
live bug with respect to walwriter and walreceiver because those never
perform any writes of shared buffers; but the potential is there for
future breakage in those processes too.
To fix, make AuxiliaryProcessMain() export the current process's
AuxProcType as a global variable, and then make mdinit() test directly for
the types of aux process that should have a pendingOpsTable. Having done
that, we might as well also get rid of the random bool flags such as
am_walreceiver that some of the aux processes had grown. (Note that we
could not have fixed the bug by examining those variables in mdinit(),
because it's called from BaseInit() which is run by AuxiliaryProcessMain()
before entering any of the process-type-specific code.)
Back-patch to 9.2, where the problem was introduced by the split-up of
bgwriter and checkpointer processes. The bogus pendingOpsTable exists
in walwriter and walreceiver processes in earlier branches, but absent
any evidence that it causes actual problems there, I'll leave the older
branches alone.
The Solaris Studio compiler warns about these instances, unlike more
mainstream compilers such as gcc. But manual inspection showed that
the code is clearly not reachable, and we hope no worthy compiler will
complain about removing this code.
Make it clearer that the passed stack mustn't be empty, and that we
are not supposed to fall off the end of the stack in the main loop.
Tighten the loop that extracts the root block number, too.
Markus Wanner and Tom Lane
Instead of letting every backend participating in a group commit wait
independently, have the first one that becomes ready to flush WAL wait
for the configured delay, and let all the others wait just long enough
for that first process to complete its flush. This greatly increases
the chances of being able to configure a commit_delay setting that
actually improves performance.
As a side consequence of this change, commit_delay now affects all WAL
flushes, rather than just commits. There was some discussion on
pgsql-hackers about whether to rename the GUC to, say, wal_flush_delay,
but in the absence of consensus I am leaving it alone for now.
Peter Geoghegan, with some changes, mostly to the documentation, by me.
Per testing by Andres Freund, this improves replication performance
and reduces replication latency and latency jitter. I was a bit
concerned about moving more work into XLogInsert, but testing seems
to show that it's not a problem in practice.
Along the way, improve comments for WaitLatchOrSocket.
Andres Freund. Review and stylistic cleanup by me.
If the record header is garbled, we're now quite likely to notice it before
we try to make a bogus memory allocation and run out of memory. That can
still happen, if the xlog record is split across pages (we cannot verify
the record header until reading the next page in that scenario), but this
reduces the chances. An out-of-memory is treated as a corrupt record
anyway, so this isn't a correctness issue, just a case of giving a better
error message.
Per Amit Kapila's suggestion.
This bug was introduced by commit 20d98ab6e4110087d1816cd105a40fcc8ce0a307,
so backpatch this to 9.0-9.2 like that one.
This fixes bug #6710, reported by Tarvi Pillessaar
The original coding failed miserably for BLCKSZ of 4K or less, as reported
by Josh Kupershmidt. With the present design for text indexes, a given
inner tuple could have up to 256 labels (requiring either 3K or 4K bytes
depending on MAXALIGN), which means that we can't positively guarantee no
failures for smaller blocksizes. But we can at least make it behave sanely
so long as there are few enough labels to fit on a page. Considering that
btree is also more prone to "index tuple too large" failures when BLCKSZ is
small, it's not clear that we should expend more work than this on this
case.
Avoid using LockPage(rel, 0, lockmode) to protect against changes to
the bucket mapping. Instead, an exclusive buffer content lock is now
viewed as sufficient permission to modify the metapage, and a shared
buffer content lock is used when such modifications need to be
prevented. This more relaxed locking regimen makes it possible that,
when we're busy getting a heavyweight bucket on the bucket we intend
to search or insert into, a bucket split might occur underneath us.
To compenate for that possibility, we use a loop-and-retry system:
release the metapage content lock, acquire the heavyweight lock on the
target bucket, and then reacquire the metapage content lock and check
that the bucket mapping has not changed. Normally it hasn't, and
we're done. But if by chance it has, we simply unlock the metapage,
release the heavyweight lock we acquired previously, lock the new
bucket, and loop around again. Even in the worst case we cannot loop
very many times here, since we don't split the same bucket again until
we've split all the other buckets, and 2^N gets big pretty fast.
This results in greatly improved concurrency, because we're
effectively replacing two lwlock acquire-and-release cycles in
exclusive mode (on one of the lock manager locks) with a single
acquire-and-release cycle in shared mode (on the metapage buffer
content lock). Testing shows that it's still not quite as good as
btree; for that, we'd probably have to find some way of getting rid
of the heavyweight bucket locks as well, which does not appear
straightforward.
Patch by me, review by Jeff Janes.
The latter was already the dominant use, and it's preferable because
in C the convention is that intXX means XX bits. Therefore, allowing
mixed use of int2, int4, int8, int16, int32 is obviously confusing.
Remove the typedefs for int2 and int4 for now. They don't seem to be
widely used outside of the PostgreSQL source tree, and the few uses
can probably be cleaned up by the time this ships.
This simplifies code that needs to do arithmetic on XLogRecPtrs.
To avoid changing on-disk format of data pages, the LSN on data pages is
still stored in the old format. That should keep pg_upgrade happy. However,
we have XLogRecPtrs embedded in the control file, and in the structs that
are sent over the replication protocol, so this changes breaks compatibility
of pg_basebackup and server. I didn't do anything about this in this patch,
per discussion on -hackers, the right thing to do would to be to change the
replication protocol to be architecture-independent, so that you could use
a newer version of pg_receivexlog, for example, against an older server
version.
This saves a few bytes of WAL space, but the real motivation is to make it
predictable how much WAL space a record requires, as it no longer depends
on whether we need to waste the last few bytes at end of WAL page because
the header doesn't fit.
The total length field of WAL record, xl_tot_len, is moved to the beginning
of the WAL record header, so that it is still always found on the first page
where a WAL record begins.
Bump WAL version number again as this is an incompatible change.
The continuation record only contained one field, xl_rem_len, so it makes
things simpler to just include it in the WAL page header. This wastes four
bytes on pages that don't begin with a continuation from previos page, plus
four bytes on every page, because of padding.
The motivation of this is to make it easier to calculate how much space a
WAL record needs. Before this patch, it depended on how many page boundaries
the record crosses. The motivation of that, in turn, is to separate the
allocation of space in the WAL from the copying of the record data to the
allocated space. Keeping the calculation of space required simple helps to
keep the critical section of allocating the space from WAL short. But that's
not included in this patch yet.
Bump WAL version number again, as this is an incompatible change.
The comments claimed that wasting the last segment made it easier to do
calculations with XLogRecPtrs, because you don't have problems representing
last-byte-position-plus-1 that way. In my experience, however, it only made
things more complicated, because the there was two ways to represent the
boundary at the beginning of a logical log file: logid = n+1 and xrecoff = 0,
or as xlogid = n and xrecoff = 4GB - XLOG_SEG_SIZE. Some functions were
picky about which representation was used.
Also, use a 64-bit segment number instead of the log/seg combination, to
point to a certain WAL segment. We assume that all platforms have a working
64-bit integer type nowadays.
This is an incompatible change in WAL format, so bumping WAL version number.
Because permissions are assigned to element types, not array types,
complaining about permission denied on an array type would be
misleading to users. So adjust the reporting to refer to the element
type instead.
In order not to duplicate the required logic in two dozen places,
refactor the permission denied reporting for types a bit.
pointed out by Yeb Havinga during the review of the type privilege
feature
There's no need to hold onto the locks until the files are needed,
and by doing it this way, we reduce the impact on other backends who
may be awaiting locks we hold.
Noah Misch
When I implemented the ginbuildempty() function as part of
implementing unlogged tables, I falsified the note in the header
comment for log_newpage. Although we could fix that up by changing
the comment, it seems cleaner to add a new function which is
specifically intended to handle this case. So do that.
