LWLockAttemptLock pointlessly read the lock's state in every loop
iteration, even though pg_atomic_compare_exchange_u32() returns the old
value. Instead do that only once before the loop iteration.
Additionally there's no need to have the expected_state variable,
old_state mostly had the same value anyway.
Noticed-By: Heikki Linnakangas
Backpatch: 9.5, no reason to let the branches diverge at this point
The lwlock scalability work introduced two race conditions into the
lwlock variable support provided for xlog.c. First, and harmlessly on
most platforms, it set/read the variable without the spinlock in some
places. Secondly, due to the removal of the spinlock, it was possible
that a backend missed changes to the variable's state if it changed in
the wrong moment because checking the lock's state, the variable's state
and the queuing are not protected by a single spinlock acquisition
anymore.
To fix first move resetting the variable's from LWLockAcquireWithVar to
WALInsertLockRelease, via a new function LWLockReleaseClearVar. That
prevents issues around waiting for a variable's value to change when a
new locker has acquired the lock, but not yet set the value. Secondly
re-check that the variable hasn't changed after enqueing, that prevents
the issue that the lock has been released and already re-acquired by the
time the woken up backend checks for the lock's state.
Reported-By: Jeff Janes
Analyzed-By: Heikki Linnakangas
Reviewed-By: Heikki Linnakangas
Discussion: 5592DB35.2060401@iki.fi
Backpatch: 9.5, where the lwlock scalability went in
An outer join clause that didn't actually reference the RHS (perhaps only
after constant-folding) could confuse the join order enforcement logic,
leading to wrong query results. Also, nested occurrences of such things
could trigger an Assertion that on reflection seems incorrect.
Per fuzz testing by Andreas Seltenreich. The practical use of such cases
seems thin enough that it's not too surprising we've not heard field
reports about it.
This has been broken for a long time, so back-patch to all active branches.
Per complaint from Peter Holzer. It's useful to cover this special case,
since for a boolean variable "foo", earlier parts of the planner will have
reduced variants like "foo = true" to just "foo", and thus we may fail
to recognize the applicability of a partial index with predicate
"foo IS NOT NULL".
Back-patch to 9.5, but not further; given the lack of previous complaints
this doesn't seem like behavior to change in stable branches.
In many cases, we can implement a semijoin as a plain innerjoin by first
passing the righthand-side relation through a unique-ification step.
However, one of the cases where this does NOT work is where the RHS has
a LATERAL reference to the LHS; that makes the RHS dependent on the LHS
so that unique-ification is meaningless. joinpath.c understood this,
and so would not generate any join paths of this kind ... but join_is_legal
neglected to check for the case, so it would think that we could do it.
The upshot would be a "could not devise a query plan for the given query"
failure once we had failed to generate any join paths at all for the bogus
join pair.
Back-patch to 9.3 where LATERAL was added.
Responsibility was formerly split between Makefile.global and pgxs.mk.
As a result of commit b58233c71b93a32fcab7219585cafc25a27eb769, in the
PGXS case, these variables were unset while parsing Makefile.global and
callees. Inclusion of Makefile.custom did not work from PGXS, and the
subtle difference seemed like a recipe for future bugs. Back-patch to
9.4, where that commit first appeared.
They are marked stable, but since they act on instantaneous state and it
is possible to consult state of transactions as they commit, the results
could change mid-query. They need to be marked volatile, and this
commit does so.
There would normally be a catversion bump here, but this is so much a
niche feature and I don't believe there's real damage from the incorrect
marking, that I refrained.
Backpatch to 9.5, where commit timestamps where introduced.
Per note from Fujii Masao.
The code was assuming that any NULL value in scan keys was due to IS
NULL or IS NOT NULL, but it turns out to be possible to get them with
other operators too, if they are used in contrived-enough ways. Easiest
way out of the problem seems to check explicitely for the IS NOT NULL
flag, instead of assuming it must be set if the IS NULL flag is not set,
when a null scan key is found; if neither flag is set, follow the lead
of other index AMs and assume that all indexable operators must be
strict, and thus the query is never satisfiable.
Also, add a comment to try and lure some future hacker into improving
analysis of scan keys in brin.
Per report from Andreas Seltenreich; diagnosis by Tom Lane.
Backpatch to 9.5.
Discussion: http://www.postgresql.org/message-id/20646.1437919632@sss.pgh.pa.us
When retrieving policies, if not working on the root target relation,
we actually want the relation's SELECT policies, regardless of
the top level query command type. For example in UPDATE t1...FROM t2
we need to apply t1's UPDATE policies and t2's SELECT policies.
Previously top level query command type was applied to all relations,
which was wrong. Add some regression coverage to ensure we don't
violate this principle in the future.
Report and patch by Dean Rasheed. Cherry picked from larger refactoring
patch and tweaked by me. Back-patched to 9.5 where RLS was introduced.
Although I think on all modern machines floating division by zero
results in Infinity not SIGFPE, we still don't want infinities
running around in the planner's costing estimates; too much risk
of that leading to insane behavior.
grouping_planner() failed to consider the possibility that final_rel
might be known dummy and hence have zero rowcount. (I wonder if it
would be better to set a rows estimate of 1 for dummy relations?
But at least in the back branches, changing this convention seems
like a bad idea, so I'll leave that for another day.)
Make certain that get_variable_numdistinct() produces a nonzero result.
The case that can be shown to be broken is with stadistinct < 0.0 and
small ntuples; we did not prevent the result from rounding to zero.
For good luck I applied clamp_row_est() to all the nonconstant return
values.
In ExecChooseHashTableSize(), Assert that we compute positive nbuckets
and nbatch. I know of no reason to think this isn't the case, but it
seems like a good safety check.
Per reports from Piotr Stefaniak. Back-patch to all active branches.
When we loop back to the top of doCustom after processing a backslash
command, we must reset the "now" timestamp, because that's used to
calculate the time spent executing the previous command.
Report and fix by Fabien Coelho. Backpatch to 9.5, where this was broken.
Per a suggestion from Tom Lane. Back-patch to 9.0 (all supported
versions). While only 9.4 and up have code known to elicit this
compiler bug, we were disabling inlining by accident until commit
43d89a23d59c487bc9258fad7a6187864cb8c0c0.
A top-level "make install" includes pg_upgrade since commit
9fa8b0ee90c44c0f97d16bf65e94322988c94864. Back-patch to 9.5, where that
commit first appeared.
The reverted changes did not narrow the semantic gap between the MSVC
build system and the GNU make build system. For targets old and new
that run multiple suites (contribcheck, modulescheck, tapcheck), restore
vcregress.pl to mimicking "make -k" rather than the "make -S" default.
Lack of "-k" would be more burdensome than lack of "-S". Keep changes
reflecting contemporary changes to the GNU make build system, and keep
updates to Makefile parsing. Keep the loss of --psqldir in "check" and
"ecpgcheck" targets; it had been a no-op when used alongside
--temp-install. No log message mentioned any of the reverted changes.
Based on a germ by Michael Paquier. Back-patch to 9.5.
This code relied on knowing exactly where in the source tree temporary
installations might appear. A reasonable hacker may not think to update
this code when adding use of a temporary installation, making it
fragile. Observe that commit 9fa8b0ee90c44c0f97d16bf65e94322988c94864
broke it unnoticed, and commit dcae5faccab64776376d354decda0017c648bb53
fixed it unnoticed. Back-patch to 9.5 only; use of temporary
installations is unlikely to change in released versions.
Policy USING and WITH CHECK expressions were using EXPR_KIND_WHERE for
parse analysis, which results in inappropriate ERROR messages when
the expression contains unsupported constructs such as aggregates.
Create a new ParseExprKind called EXPR_KIND_POLICY and tailor the
related messages to fit.
Reported by Noah Misch. Reviewed by Dean Rasheed, Alvaro Herrera,
and Robert Haas. Back-patch to 9.5 where RLS was introduced.
A Salesforce colleague of mine griped that the regression tests don't
exercise EvalPlanQualFetchRowMarks() and allied routines. Which is
a fair complaint. Add test cases that go through the REFERENCE and COPY
code paths. Unfortunately we don't have sufficient infrastructure right
now to exercise the FDW code path in the isolation tests, but this is
surely better than before.
AlterPolicy() and CreatePolicy() lacked their respective hook invocations.
Noted by Noah Misch, review by Dean Rasheed. Back-patch to 9.5 where
RLS was introduced.
When DefineQueryRewrite() is about to convert a table to a view, it checks
the table for features unavailable to views. For example, it rejects tables
having triggers. It omits to reject tables having relrowsecurity or a
pg_policy record. Fix that. To faciliate the repair, invent
relation_has_policies() which indicates the presence of policies on a
relation even when row security is disabled for that relation.
Reported by Noah Misch. Patch by me, review by Stephen Frost. Back-patch
to 9.5 where RLS was introduced.
CreatePolicy() and AlterPolicy() omit to create a pg_shdepend entry for
each role in the TO clause. Fix this by creating a new shared dependency
type called SHARED_DEPENDENCY_POLICY and assigning it to each role.
Reported by Noah Misch. Patch by me, reviewed by Alvaro Herrera.
Back-patch to 9.5 where RLS was introduced.
Although initdb has long discouraged use of a filesystem mount-point
directory as a PG data directory, this point was covered nowhere in the
user-facing documentation. Also, with the popularity of pg_upgrade,
we really need to recommend that the PG user own not only the data
directory but its parent directory too. (Without a writable parent
directory, operations such as "mv data data.old" fail immediately.
pg_upgrade itself doesn't do that, but wrapper scripts for it often do.)
Hence, adjust the "Creating a Database Cluster" section to address
these points. I also took the liberty of wordsmithing the discussion
of NFS a bit.
These considerations aren't by any means new, so back-patch to all
supported branches.
The previous code resulted in memory access beyond the path bounds. The
cure is to move it into a code branch that checks the value of lex_level
is within the correct bounds.
Bug reported and diagnosed by Piotr Stefaniak.
Don't print a WARNING if we get ESRCH from a kill() that's attempting
to cancel an autovacuum worker. It's possible (and has been seen in the
buildfarm) that the worker is already gone by the time we are able to
execute the kill, in which case the failure is harmless. About the only
plausible reason for reporting such cases would be to help debug corrupted
lock table contents, but this is hardly likely to be the most important
symptom if that happens. Moreover issuing a WARNING might scare users
more than is warranted.
Also, since sending a signal to an autovacuum worker is now entirely a
routine thing, and the worker will log the query cancel on its end anyway,
reduce the message saying we're doing that from LOG to DEBUG1 level.
Very minor cosmetic cleanup as well.
Since the main practical reason for doing this is to avoid unnecessary
buildfarm failures, back-patch to all active branches.
The pg_stats view is supposed to be restricted to only show rows
about tables the user can read. However, it sometimes can leak
information which could not otherwise be seen when row level security
is enabled. Fix that by not showing pg_stats rows to users that would
be subject to RLS on the table the row is related to. This is done
by creating/using the newly introduced SQL visible function,
row_security_active().
Along the way, clean up three call sites of check_enable_rls(). The second
argument of that function should only be specified as other than
InvalidOid when we are checking as a different user than the current one,
as in when querying through a view. These sites were passing GetUserId()
instead of InvalidOid, which can cause the function to return incorrect
results if the current user has the BYPASSRLS privilege and row_security
has been set to OFF.
Additionally fix a bug causing RI Trigger error messages to unintentionally
leak information when RLS is enabled, and other minor cleanup and
improvements. Also add WITH (security_barrier) to the definition of pg_stats.
Bumped CATVERSION due to new SQL functions and pg_stats view definition.
Back-patch to 9.5 where RLS was introduced. Reported by Yaroslav.
Patch by Joe Conway and Dean Rasheed with review and input by
Michael Paquier and Stephen Frost.
While postgres' use of SSL renegotiation is a good idea in theory, it
turned out to not work well in practice. The specification and openssl's
implementation of it have lead to several security issues. Postgres' use
of renegotiation also had its share of bugs.
Additionally OpenSSL has a bunch of bugs around renegotiation, reported
and open for years, that regularly lead to connections breaking with
obscure error messages. We tried increasingly complex workarounds to get
around these bugs, but we didn't find anything complete.
Since these connection breakages often lead to hard to debug problems,
e.g. spuriously failing base backups and significant latency spikes when
synchronous replication is used, we have decided to change the default
setting for ssl renegotiation to 0 (disabled) in the released
backbranches and remove it entirely in 9.5 and master.
Author: Andres Freund
Discussion: 20150624144148.GQ4797@alap3.anarazel.de
Backpatch: 9.5 and master, 9.0-9.4 get a different patch
join_clause_is_movable_into() is approximate, in the sense that it might
sometimes return "false" when actually it would be valid to push the given
join clause down to the specified level. This is okay ... but there was
an Assert in get_joinrel_parampathinfo() that's only safe if the answers
are always exact. Comment out the Assert, and add a bunch of commentary
to clarify what's going on.
Per fuzz testing by Andreas Seltenreich. The added regression test is
a pretty silly query, but it's based on his crasher example.
Back-patch to 9.2 where the faulty logic was introduced.
Create a log file for each test run. Stdout and stderr of the test script,
as well as any subprocesses run as part of the test, are redirected to
the log file. This makes it a lot easier to debug test failures. Also print
the test output (ok 12 - ... messages) to the log file, and the command
line of any external programs executed with the system_or_bail and run_log
functions. This makes it a lot easier to debug failing tests.
Modify some of the pg_ctl and other command invocations to not use 'silent'
or 'quiet' options, and don't redirect output to /dev/null, so that you get
all the information in the log instead.
In the passing, construct some command lines in a way that works if $tempdir
contains quote-characters. I haven't systematically gone through all of
them or tested that, so I don't know if this is enough to make that work.
pg_rewind tests had a custom mechanism for creating a similar log file. Use
the new generic facility instead.
Michael Paquier and Heikki Linnakangas.
This is a backpatch of Heikki's commit 1ea06203b82b98b5098808667f6ba652181ef5b2.
To avoid a race condition where the relation being COPY'd could be
changed into a view or otherwise modified, keep the original lock
on the relation. Further, fully qualify the relation when building
the query up.
Also remove the poorly thought-out Assert() and check the entire
relationOids list as, post-RLS, there can certainly be multiple
relations involved and the planner does not guarantee their ordering.
Per discussion with Noah and Andres.
Back-patch to 9.5 where RLS was introduced.
Fix additional bogosity in commit 9029f4b37406b21a. Include the
BackendSslStatusBuffer in the BackendStatusShmemSize calculation,
avoid ugly and error-prone casts to char* and back, put related
code stanzas into a consistent order (and fix a couple of previous
instances of that sin). All cosmetic except for the size oversight.
On some platforms, notably ARM and PowerPC, 'char' is unsigned by
default. This fixes an assertion failure at WAL replay on such platforms.
Reported by Noah Misch. Backpatch to 9.5, where this was broken.
It does currently, and I don't see us changing that any time soon, but we
don't make that assumption anywhere else.
Per Tom Lane's suggestion. Backpatch to 9.2, like the previous patch that
added this assumption.
XLogReaderFree failed to free the per-block data buffers, when they
happened to not be used by the latest read WAL record.
Michael Paquier. Backpatch to 9.5, where the per-block buffers were added.
In GIN, an all-zeros page would be leaked forever, and never reused. Just
add them to the FSM in vacuum, and they will be reinitialized when grabbed
from the FSM. On master and 9.5, attempting to access the page's opaque
struct also caused an assertion failure, although that was otherwise
harmless.
Reported by Jeff Janes. Backpatch to all supported versions.
SP-GiST initialized an all-zeros page at vacuum, but that was not
WAL-logged, which is not safe. You might get a torn page write, when it gets
flushed to disk, and end-up with a half-initialized index page. To fix,
leave it in the all-zeros state, and add it to the FSM. It will be
initialized when reused. Also don't set the page-deleted flag when recycling
an empty page. That was also not WAL-logged, and a torn write of that would
cause the page to have an invalid checksum.
Backpatch to 9.2, where SP-GiST indexes were added.
That was otherwise harmless, but tripped the new assertion in
PageGetSpecialPointer().
Reported by Amit Langote. Backpatch to 9.5, where the assertion was added.
There is no full discussion of speculative insertions in the executor
README. There is a high-level explanation in execIndexing.c, but it doesn't
seem necessary to refer it from here.
Peter Geoghegan
I missed a restriction that commit f4abd0241de20d5d6a79b84992b9e88603d44134
should have enforced: we can't pull up an empty-FROM subquery if it's under
an outer join, because then we'd need to wrap its output columns in
PlaceHolderVars. As the code currently stands, the PHVs end up with empty
relid sets, which doesn't work (and is correctly caught by an Assert).
It's possible that this could be fixed by assigning the PHVs the relid
sets of the parent FromExpr/JoinExpr, but getting that to work is more
complication than I care to add right now; indeed it's likely that
we'll never bother, since pulling up empty-FROM subqueries is a rather
marginal optimization anyway.
Per report from Andreas Seltenreich. Back-patch to 9.5 where the faulty
code was added.
The planner generally expects that the estimated rowcount of any relation
is at least one row, *unless* it has been proven empty by constraint
exclusion or similar mechanisms, which is marked by installing a dummy path
as the rel's cheapest path (cf. IS_DUMMY_REL). When I split up
allpaths.c's processing of base rels into separate set_base_rel_sizes and
set_base_rel_pathlists steps, the intention was that dummy rels would get
marked as such during the "set size" step; this is what justifies an Assert
in indxpath.c's get_loop_count that other relations should either be dummy
or have positive rowcount. Unfortunately I didn't get that quite right
for append relations: if all the child rels have been proven empty then
set_append_rel_size would come up with a rowcount of zero, which is
correct, but it didn't then do set_dummy_rel_pathlist. (We would have
ended up with the right state after set_append_rel_pathlist, but that's
too late, if we generate indexpaths for some other rel first.)
In addition to fixing the actual bug, I installed an Assert enforcing this
convention in set_rel_size; that then allows simplification of a couple
of now-redundant tests for zero rowcount in set_append_rel_size.
Also, to cover the possibility that third-party FDWs have been careless
about not returning a zero rowcount estimate, apply clamp_row_est to
whatever an FDW comes up with as the rows estimate.
Per report from Andreas Seltenreich. Back-patch to 9.2. Earlier branches
did not have the separation between set_base_rel_sizes and
set_base_rel_pathlists steps, so there was no intermediate state where an
appendrel would have had inconsistent rowcount and pathlist. It's possible
that adding the Assert to set_rel_size would be a good idea in older
branches too; but since they're not under development any more, it's likely
not worth the trouble.
ON CONFLICT unique index inference had a thinko that could affect cases
where the user-supplied inference clause required that an attribute
match a particular (user specified) collation and/or opclass.
infer_collation_opclass_match() has to check for opclass and/or
collation matches and that the attribute is in the list of attributes or
expressions known to be in the definition of the index under
consideration. The bug was that these two conditions weren't necessarily
evaluated for the same index attribute.
Author: Peter Geoghegan
Discussion: CAM3SWZR4uug=WvmGk7UgsqHn2MkEzy9YU-+8jKGO4JPhesyeWg@mail.gmail.com
Backpatch: 9.5, where ON CONFLICT was introduced
