"ECHO all" is ignored for interactive input, and has been for a very long
time, though possibly not for as long as the documentation has claimed the
opposite. Fix that, and also note that empty lines aren't echoed, which
while dubious is another longstanding behavior (it's embedded in our
regression test files for one thing). Per bug #12721 from Hans Ginzel.
In HEAD, also improve the code comments in this area, and suppress an
unnecessary fflush(stdout) when we're not echoing. That would likely
be safe to back-patch, but I'll not risk it mere hours before a release
wrap.
Coverity points out that mdc_finish returns a pointer to a local buffer
(which of course is gone as soon as the function returns), leaving open
a risk of misbehaviors possibly as bad as a stack overwrite.
In reality, the only possible call site is in process_data_packets()
which does not examine the returned pointer at all. So there's no
live bug, but nonetheless the code is confusing and risky. Refactor
to avoid the issue by letting process_data_packets() call mdc_finish()
directly instead of going through the pullf_read() API.
Although this is only cosmetic, it seems good to back-patch so that
the logic in pgp-decrypt.c stays in sync across all branches.
Marko Kreen
In 804b6b6db4 we modified
BuildIndexValueDescription to pay attention to which columns are visible
to the user, but unfortunatley that commit neglected to consider indexes
which are built on expressions.
Handle error-reporting of violations of constraint indexes based on
expressions by not returning any detail when the user does not have
table-level SELECT rights.
Backpatch to 9.0, as the prior commit was.
Pointed out by Tom.
connectby() didn't adequately check that the constructed SQL query returns
what it's expected to; in fact, since commit 08c33c426b it wasn't
checking that at all. This could result in a null-pointer-dereference
crash if the constructed query returns only one column instead of the
expected two. Less excitingly, it could also result in surprising data
conversion failures if the constructed query returned values that were
not I/O-conversion-compatible with the types specified by the query
calling connectby().
In all branches, insist that the query return at least two columns;
this seems like a minimal sanity check that can't break any reasonable
use-cases.
In HEAD, insist that the constructed query return the types specified by
the outer query, including checking for typmod incompatibility, which the
code never did even before it got broken. This is to hide the fact that
the implementation does a conversion to text and back; someday we might
want to improve that.
In back branches, leave that alone, since adding a type check in a minor
release is more likely to break things than make people happy. Type
inconsistencies will continue to work so long as the actual type and
declared type are I/O representation compatible, and otherwise will fail
the same way they used to.
Also, in all branches, be on guard for NULL results from the constructed
query, which formerly would cause null-pointer dereference crashes.
We now print the row with the NULL but don't recurse down from it.
In passing, get rid of the rather pointless idea that
build_tuplestore_recursively() should return the same tuplestore that's
passed to it.
Michael Paquier, adjusted somewhat by me
GetLockConflicts() has for a long time not properly terminated the
returned array. During normal processing the returned array is zero
initialized which, while not pretty, is sufficient to be recognized as
a invalid virtual transaction id. But the HotStandby case is more than
aesthetically broken: The allocated (and reused) array is neither
zeroed upon allocation, nor reinitialized, nor terminated.
Not having a terminating element means that the end of the array will
not be recognized and that recovery conflict handling will thus read
ahead into adjacent memory. Only terminating when hitting memory
content that looks like a invalid virtual transaction id. Luckily
this seems so far not have caused significant problems, besides making
recovery conflict more expensive.
Discussion: 20150127142713.GD29457@awork2.anarazel.de
Backpatch into all supported branches.
When gin_fuzzy_search_limit was used, we could jump out of startScan()
without calling startScanKey(). That was harmless in 9.3 and below, because
startScanKey()() didn't do anything interesting, but in 9.4 it initializes
information needed for skipping entries (aka GIN fast scans), and you
readily get a segfault if it's not done. Nevertheless, it was clearly wrong
all along, so backpatch all the way to 9.1 where the early return was
introduced.
(AFAICS startScanKey() did nothing useful in 9.3 and below, because the
fields it initialized were already initialized in ginFillScanKey(), but I
don't dare to change that in a minor release. ginFillScanKey() is always
called in gingetbitmap() even though there's a check there to see if the
scan keys have already been initialized, because they never are; ginrescan()
free's them.)
In the passing, remove unnecessary if-check from the second inner loop in
startScan(). We already check in the first loop that the condition is true
for all entries.
Reported by Olaf Gawenda, bug #12694, Backpatch to 9.1 and above, although
AFAICS it causes a live bug only in 9.4.
Commit 804b6b6db4 added the build of a
range table in copy.c to initialize the EState es_range_table since it
can be needed in error paths. Unfortunately, that commit didn't
appreciate that some code paths might end up not initializing the rte
which is used to build the range table.
Fix that and clean up a couple others things along the way- build it
only once and don't explicitly set it on the !is_from path as it
doesn't make any sense there (cstate is palloc0'd, so this isn't an
issue from an initializing standpoint either).
The prior commit went back to 9.0, but this only goes back to 9.1 as
prior to that the range table build happens immediately after building
the RTE and therefore doesn't suffer from this issue.
Pointed out by Robert.
While building error messages to return to the user,
BuildIndexValueDescription and ri_ReportViolation would happily include
the entire key or entire row in the result returned to the user, even if
the user didn't have access to view all of the columns being included.
Instead, include only those columns which the user is providing or which
the user has select rights on. If the user does not have any rights
to view the table or any of the columns involved then no detail is
provided and a NULL value is returned from BuildIndexValueDescription.
Note that, for key cases, the user must have access to all of the
columns for the key to be shown; a partial key will not be returned.
Back-patch all the way, as column-level privileges are now in all
supported versions.
This has been assigned CVE-2014-8161, but since the issue and the patch
have already been publicized on pgsql-hackers, there's no point in trying
to hide this commit.
Commit 145343534c arranged to store numeric
NaN values as short-header numerics, but the field access macros did not
get the memo: they thought only "SHORT" numerics have short headers.
Most of the time this makes no difference because we don't access the
weight or dscale of a NaN; but numeric_send does that. As pointed out
by Andrew Gierth, this led to fetching uninitialized bytes.
AFAICS this could not have any worse consequences than that; in particular,
an unaligned stored numeric would have been detoasted by PG_GETARG_NUMERIC,
so that there's no risk of a fetch off the end of memory. Still, the code
is wrong on its own terms, and it's not hard to foresee future changes that
might expose us to real risks. So back-patch to all affected branches.
The "callargs" variable is modified within PG_TRY and then referenced
within PG_CATCH, which is exactly the coding pattern we've now found
to be unsafe. Marking "callargs" volatile would be problematic because
it is passed by reference to some Tcl functions, so fix the problem
by not modifying it within PG_TRY. We can just postpone the free()
till we exit the PG_TRY construct, as is already done elsewhere in this
same file.
Also, fix failure to free(callargs) when exiting on too-many-arguments
error. This is only a minor memory leak, but a leak nonetheless.
In passing, remove some unnecessary "volatile" markings in the same
function. Those doubtless are there because gcc 2.95.3 whinged about
them, but we now know that its algorithm for complaining is many bricks
shy of a load.
This is certainly a live bug with compilers that optimize similarly
to current gcc, so back-patch to all active branches.
The "pos" variable is modified within PG_TRY and then referenced
within PG_CATCH, so for strict POSIX conformance it must be marked
volatile. Superficially the code looked safe because pos's address
was taken, which was sufficient to force it into memory ... but it's
not sufficient to ensure that the compiler applies updates exactly
where the program text says to. The volatility marking has to extend
into a couple of subroutines too, but I think that's probably a good
thing because the risk of out-of-order updates is mostly in those
subroutines not asyncQueueReadAllNotifications() itself. In principle
the compiler could have re-ordered operations such that an error could
be thrown while "pos" had an incorrect value.
It's unclear how real the risk is here, but for safety back-patch
to all active branches.
strncpy() has a well-deserved reputation for being unsafe, so make an
effort to get rid of nearly all occurrences in HEAD.
A large fraction of the remaining uses were passing length less than or
equal to the known strlen() of the source, in which case no null-padding
can occur and the behavior is equivalent to memcpy(), though doubtless
slower and certainly harder to reason about. So just use memcpy() in
these cases.
In other cases, use either StrNCpy() or strlcpy() as appropriate (depending
on whether padding to the full length of the destination buffer seems
useful).
I left a few strncpy() calls alone in the src/timezone/ code, to keep it
in sync with upstream (the IANA tzcode distribution). There are also a
few such calls in ecpg that could possibly do with more analysis.
AFAICT, none of these changes are more than cosmetic, except for the four
occurrences in fe-secure-openssl.c, which are in fact buggy: an overlength
source leads to a non-null-terminated destination buffer and ensuing
misbehavior. These don't seem like security issues, first because no stack
clobber is possible and second because if your values of sslcert etc are
coming from untrusted sources then you've got problems way worse than this.
Still, it's undesirable to have unpredictable behavior for overlength
inputs, so back-patch those four changes to all active branches.
Move random() and setseed() to a separate table, to have them grouped
together. Also add a notice that random() is not cryptographically secure.
Back-patch of commit 75fdcec145 into
all supported versions, per discussion of the need to document that
random() is just a wrapper around random(3).
This results in a very substantial reduction in disk space usage during
"make check-world", since that sequence involves creation of numerous
temporary installations. It should also help a bit in the buildfarm, even
though the buildfarm script doesn't create as many temp installations,
because the current script misses deleting some of them; and anyway it
seems better to do this once in one place rather than expecting that
script to get it right every time.
In 9.4 and HEAD, also undo the unwise choice in commit b1aebbb6a8
to report strerror(errno) after a rmtree() failure. rmtree has already
reported that, possibly for multiple failures with distinct errnos; and
what's more, by the time it returns there is no good reason to assume
that errno still reflects the last reportable error. So reporting errno
here is at best redundant and at worst badly misleading.
Back-patch to all supported branches, so that future revisions of the
buildfarm script can rely on this behavior.
Per discussion, change the log level of this message to be LOG not WARNING.
The main point of this change is to avoid causing buildfarm run failures
when the stats collector is exceptionally slow to respond, which it not
infrequently is on some of the smaller/slower buildfarm members.
This change does lose notice to an interactive user when his stats query
is looking at out-of-date stats, but the majority opinion (not necessarily
that of yours truly) is that WARNING messages would probably not get
noticed anyway on heavily loaded production systems. A LOG message at
least ensures that the problem is recorded somewhere where bulk auditing
for the issue is possible.
Also, instead of an untranslated "pgstat wait timeout" message, provide
a translatable and hopefully more understandable message "using stale
statistics instead of current ones because stats collector is not
responding". The original text was written hastily under the assumption
that it would never really happen in practice, which we now know to be
unduly optimistic.
Back-patch to all active branches, since we've seen the buildfarm issue
in all branches.
Previously, the xml value resulting from an xpath query would not have
namespace declarations if the namespace declarations were attached to
an ancestor element in the input xml value. That means the output value
was not correct XML. Fix that by running the result value through
xmlCopyNode(), which produces the correct namespace declarations.
Author: Ali Akbar <the.apaan@gmail.com>
Commit 894459e59f revealed this option to
be broken for NLS builds on Darwin, but "make -C contrib/unaccent check"
and the buildfarm client rely on it. Fix that configuration by
redefining the option to imply LANG=C on Darwin. In passing, use LANG=C
instead of LANG=en on Windows; since only postmaster startup uses that
value, testers are unlikely to notice the change. Back-patch to 9.0,
like the predecessor commit.
Up to now, the "child" executor state trees generated for EvalPlanQual
rechecks have simply shared the ResultRelInfo arrays used for the original
execution tree. However, this leads to dangling-pointer problems, because
ExecInitModifyTable() is all too willing to scribble on some fields of the
ResultRelInfo(s) even when it's being run in one of those child trees.
This trashes those fields from the perspective of the parent tree, because
even if the generated subtree is logically identical to what was in use in
the parent, it's in a memory context that will go away when we're done
with the child state tree.
We do however want to share information in the direction from the parent
down to the children; in particular, fields such as es_instrument *must*
be shared or we'll lose the stats arising from execution of the children.
So the simplest fix is to make a copy of the parent's ResultRelInfo array,
but not copy any fields back at end of child execution.
Per report from Manuel Kniep. The added isolation test is based on his
example. In an unpatched memory-clobber-enabled build it will reliably
fail with "ctid is NULL" errors in all branches back to 9.1, as a
consequence of junkfilter->jf_junkAttNo being overwritten with $7f7f.
This test cannot be run as-is before that for lack of WITH syntax; but
I have no doubt that some variant of this problem can arise in older
branches, so apply the code change all the way back.
Previously, read() might have returned a length equal to the buffer
length, and then the subsequent store to buf[len] would write a
zero-byte one byte past the end. This doesn't seem likely to be
a security issue, but there's some chance it could result in
pg_standby misbehaving.
Spotted by Coverity; patch by Michael Paquier, reviewed by me.
Commit b94ce6e80 reordered postmaster's startup sequence so that the
tempfile directory is only cleaned up after all the necessary state
for pg_ctl is collected. Unfortunately the chosen location is after
the syslogger has been started; which normally is fine, except for
!WIN32 EXEC_BACKEND builds, which pass information to children via
files in the temp directory.
Move the call to RemovePgTempFiles() to just before the syslogger has
started. That's the first child we fork.
Luckily EXEC_BACKEND is pretty much only used by endusers on windows,
which has a separate method to pass information to children. That
means the real world impact of this bug is very small.
Discussion: 20150113182344.GF12272@alap3.anarazel.de
Backpatch to 9.1, just as the previous commit was.
I noticed the "vacuum" regression test taking really significantly longer
than it used to on a slow machine. Investigation pointed the finger at
commit e415b469b3, which added creation of
an index using an extremely expensive index function. That function was
evidently meant to be applied only twice ... but the test re-used an
existing test table, which up till a couple lines before that had had over
two thousand rows. Depending on timing of the concurrent regression tests,
the intervening VACUUMs might have been unable to remove those
recently-dead rows, and then the index build would need to create index
entries for them too, leading to the wrap_do_analyze() function being
executed 2000+ times not twice. Avoid this by using a different table
that is guaranteed to have only the intended two rows in it.
Back-patch to 9.0, like the commit that created the problem.
Darwin --enable-nls builds use a substitute setlocale() that may start a
thread. Buildfarm member orangutan experienced BackendList corruption
on account of different postmaster threads executing signal handlers
simultaneously. Furthermore, a multithreaded postmaster risks undefined
behavior from sigprocmask() and fork(). Emit LOG messages about the
problem and its workaround. Back-patch to 9.0 (all supported versions).
Typical server invocations already achieved that. Invalid locale
settings in the initial postmaster environment interfered, as could
malloc() failure. Setting "LC_MESSAGES=pt_BR.utf8 LC_ALL=invalid" in
the postmaster environment will now choose C-locale messages, not
Brazilian Portuguese messages. Most localized programs, including all
PostgreSQL frontend executables, do likewise. Users are unlikely to
observe changes involving locale categories other than LC_MESSAGES.
CheckMyDatabase() ensures that we successfully set LC_COLLATE and
LC_CTYPE; main() sets the remaining three categories to locale "C",
which almost cannot fail. Back-patch to 9.0 (all supported versions).
vacuum()'s static variable handling makes it non-reentrant; an ensuing
null pointer deference crashed the backend. Back-patch to 9.0 (all
supported versions).
The corner case where a relcache invalidation tried to rebuild the
entry for a referenced relation but couldn't find it in the catalog
wasn't correct.
The code tried to RelationCacheDelete/RelationDestroyRelation the
entry. That didn't work when assertions are enabled because the latter
contains an assertion ensuring the refcount is zero. It's also more
generally a bad idea, because by virtue of being referenced somebody
might actually look at the entry, which is possible if the error is
trapped and handled via a subtransaction abort.
Instead just error out, without deleting the entry. As the entry is
marked invalid, the worst that can happen is that the invalid (and at
some point unused) entry lingers in the relcache.
Discussion: 22459.1418656530@sss.pgh.pa.us
There should be no way to hit this case < 9.4 where logical decoding
introduced a bug that can hit this. But since the code for handling
the corner case is there it should do something halfway sane, so
backpatch all the the way back. The logical decoding bug will be
handled in a separate commit.
WAL (and timeline history) files created by pg_basebackup did not
maintain the new base backup's archive status. That's currently not a
problem if the new node is used as a standby - but if that node is
promoted all still existing files can get archived again. With a high
wal_keep_segment settings that can happen a significant time later -
which is quite confusing.
Change both the backend (for the -x/-X fetch case) and pg_basebackup
(for -X stream) itself to always mark WAL/timeline files included in
the base backup as .done. That's in line with walreceiver.c doing so.
The verbosity of the pg_basebackup changes show pretty clearly that it
needs some refactoring, but that'd result in not be backpatchable
changes.
Backpatch to 9.1 where pg_basebackup was introduced.
Discussion: 20141205002854.GE21964@awork2.anarazel.de
Use the phraseology "ISO 8601 week-numbering year" in place of just
"ISO year", and make related adjustments to other terminology.
The point of this change is that it seems some people see "ISO year"
and think "standard year", whereupon they're surprised when constructs
like to_char(..., "IYYY-MM-DD") produce nonsensical results. Perhaps
hanging a few more adjectives on it will discourage them from jumping
to false conclusions. I put in an explicit warning against that
specific usage, too, though the main point is to discourage people
who haven't read this far down the page.
In passing fix some nearby markup and terminology inconsistencies.
For simple boolean variables such as ON_ERROR_STOP, psql has for a long
time recognized variant spellings of "on" and "off" (such as "1"/"0"),
and it also made a point of warning you if you'd misspelled the setting.
But these conveniences did not exist for other keyword-valued variables.
In particular, though ECHO_HIDDEN and ON_ERROR_ROLLBACK include "on" and
"off" as possible values, none of the alternative spellings for those were
recognized; and to make matters worse the code would just silently assume
"on" was meant for any unrecognized spelling. Several people have reported
getting bitten by this, so let's fix it. In detail, this patch:
* Allows all spellings recognized by ParseVariableBool() for ECHO_HIDDEN
and ON_ERROR_ROLLBACK.
* Reports a warning for unrecognized values for COMP_KEYWORD_CASE, ECHO,
ECHO_HIDDEN, HISTCONTROL, ON_ERROR_ROLLBACK, and VERBOSITY.
* Recognizes all values for all these variables case-insensitively;
previously there was a mishmash of case-sensitive and case-insensitive
behaviors.
Back-patch to all supported branches. There is a small risk of breaking
existing scripts that were accidentally failing to malfunction; but the
consensus is that the chance of detecting real problems and preventing
future mistakes outweighs this.
Document the long forms of \H \i \ir \o \p \r \w ... apparently, we have
a long and dishonorable history of leaving out the unabbreviated names of
psql backslash commands.
Avoid saying "Unix shell"; we can just say "shell" with equal clarity,
and not leave Windows users wondering whether the feature works for them.
Improve consistency of documentation of \g \o \w metacommands. There's
no reason to use slightly different wording or markup for each one.
Windows versions later than Windows Server 2003 map "localhost" to ::1.
Account for that in the generated pg_hba.conf, fixing another oversight
in commit f6dc6dd5ba. Back-patch to 9.0,
like that commit.
David Rowley and Noah Misch
For some reason this seems to have been missed when the lists in
src/timezone/tznames/ were first constructed. We can't put it in Default
because of the conflict with US CST, but we should certainly list it among
the alternative entries in Asia.txt. (I checked for other oversights, but
all the other abbreviations that are in current use according to the IANA
files seem to be accounted for.) Noted while responding to bug #12326.
Explain that you have to use "VARIADIC ARRAY[]" to pass an empty array
to a variadic parameter position. This was already implicit in the text
but it seems better to spell it out.
Per a suggestion from David Johnston, though I didn't use his proposed
wording. Back-patch to all supported branches.
In LWLockRelease() (and in 9.4+ LWLockUpdateVar()) we release enqueued
waiters using PGSemaphoreUnlock(). As there are other sources of such
unlocks backends only wake up if MyProc->lwWaiting is set to false;
which is only done in the aforementioned functions.
Before this commit there were dangers because the store to lwWaitLink
could become visible before the store to lwWaitLink. This could both
happen due to compiler reordering (on most compilers) and on some
platforms due to the CPU reordering stores.
The possible consequence of this is that a backend stops waiting
before lwWaitLink is set to NULL. If that backend then tries to
acquire another lock and has to wait there the list could become
corrupted once the lwWaitLink store is finally performed.
Add a write memory barrier to prevent that issue.
Unfortunately the barrier support has been only added in 9.2. Given
that the issue has not knowingly been observed in praxis it seems
sufficient to prohibit compiler reordering using volatile for 9.0 and
9.1. Actual problems due to compiler reordering are more likely
anyway.
Discussion: 20140210134625.GA15246@awork2.anarazel.de
The possibility that constant subexpressions of a CASE might be evaluated
at planning time was touched on in 9.17.1 (CASE expressions), but it really
ought to be explained in 4.2.14 (Expression Evaluation Rules) which is the
primary discussion of such topics. Add text and an example there, and
revise the <note> under CASE to link there.
Back-patch to all supported branches, since it's acted like this for a
long time (though 9.2+ is probably worse because of its more aggressive
use of constant-folding via replanning of nominally-prepared statements).
Pre-9.4, also back-patch text added in commit 0ce627d4 about CASE versus
aggregate functions.
Tom Lane and David Johnston, per discussion of bug #12273.
Back-patch to 9.0 (all supported versions). This is mere
future-proofing in the context of the master branch, but commit
f6dc6dd5ba requires it of older branches.
Use SSPI authentication to allow connections exclusively from the OS
user that launched the test suite. This closes on Windows the
vulnerability that commit be76a6d39e
closed on other platforms. Users of "make installcheck" or custom test
harnesses can run "pg_regress --config-auth=DATADIR" to activate the
same authentication configuration that "make check" would use.
Back-patch to 9.0 (all supported versions).
Security: CVE-2014-0067
MapArrayTypeName would copy up to NAMEDATALEN-1 bytes of the base type
name, which of course is wrong: after prepending '_' there is only room for
NAMEDATALEN-2 bytes. Aside from being the wrong result, this case would
lead to overrunning the statically allocated work buffer. This would be a
security bug if the function were ever used outside bootstrap mode, but it
isn't, at least not in any currently supported branches.
Aside from fixing the off-by-one loop logic, this patch gets rid of the
static work buffer by having MapArrayTypeName pstrdup its result; the sole
caller was already doing that, so this just requires moving the pstrdup
call. This saves a few bytes but mainly it makes the API a lot cleaner.
Back-patch on the off chance that there is some third-party code using
MapArrayTypeName with less-secure input. Pushing pstrdup into the function
should not cause any serious problems for such hypothetical code; at worst
there might be a short term memory leak.
Per Coverity scanning.
If the called command fails to return data, runShellCommand forgot to
pclose() the pipe before returning. This is fairly harmless in the current
code, because pgbench would then abandon further processing of that client
thread; so no more than nclients descriptors could be leaked this way. But
it's not hard to imagine future improvements whereby that wouldn't be true.
In any case, it's sloppy coding, so patch all branches. Found by Coverity.
Ordinarily we can omit checking of a WHERE condition that matches a partial
index's condition, when we are using an indexscan on that partial index.
However, in SELECT FOR UPDATE we must include the "redundant" filter
condition in the plan so that it gets checked properly in an EvalPlanQual
recheck. The planner got this mostly right, but improperly omitted the
filter condition if the index in question was on an inheritance child
table. In READ COMMITTED mode, this could result in incorrectly returning
just-updated rows that no longer satisfy the filter condition.
The cause of the error is using get_parse_rowmark() when get_plan_rowmark()
is what should be used during planning. In 9.3 and up, also fix the same
mistake in contrib/postgres_fdw. It's currently harmless there (for lack
of inheritance support) but wrong is wrong, and the incorrect code might
get copied to someplace where it's more significant.
Report and fix by Kyotaro Horiguchi. Back-patch to all supported branches.
In READ COMMITTED mode, if a SELECT FOR UPDATE discovers it has to redo
WHERE-clause checking on rows that have been updated since the SELECT's
snapshot, it invokes EvalPlanQual processing to do that. If this first
occurs within a non-first child table of an inheritance tree, the previous
coding could accidentally re-return a matching row from an earlier,
already-scanned child table. (And, to add insult to injury, I think this
could make it miss returning a row that should have been returned, if the
updated row that this happens on should still have passed the WHERE qual.)
Per report from Kyotaro Horiguchi; the added isolation test is based on his
test case.
This has been broken for quite awhile, so back-patch to all supported
branches.
Used to say just "could not read password from file "...": Success", which
isn't very informative.
Mats Erik Andersson. Backpatch to all supported versions.
We were not checking to see if the supplied dscale was valid for the given
digit array when receiving binary-format numeric values. While dscale can
validly be more than the number of nonzero fractional digits, it shouldn't
be less; that case causes fractional digits to be hidden on display even
though they're there and participate in arithmetic.
Bug #12053 from Tommaso Sala indicates that there's at least one broken
client library out there that sometimes supplies an incorrect dscale value,
leading to strange behavior. This suggests that simply throwing an error
might not be the best response; it would lead to failures in applications
that might seem to be working fine today. What seems the least risky fix
is to truncate away any digits that would be hidden by dscale. This
preserves the existing behavior in terms of what will be printed for the
transmitted value, while preventing subsequent arithmetic from producing
results inconsistent with that.
In passing, throw a specific error for the case of dscale being outside
the range that will fit into a numeric's header. Before you got "value
overflows numeric format", which is a bit misleading.
Back-patch to all supported branches.
Coverity complained that the "else" added to fillPGconn() was unreachable,
which it was. Remove the dead code. In passing, rearrange the tests so as
not to bother trying to fetch values for options that can't be assigned.
Pre-9.3 did not have that issue, but it did have a "return" that should be
"goto oom_error" to ensure that a suitable error message gets filled in.
