The maximum value of deadlock_timeout, max_standby_archive_delay,
max_standby_streaming_delay, log_min_duration_statement, and
log_autovacuum_min_duration was INT_MAX/1000 milliseconds, which is
about 35min, which is too short for some practical uses. Raise the
maximum value to INT_MAX; the code that uses the parameters already
supports that just fine.
1. Don't ignore query cancel interrupts. Instead, if the user asks to
cancel the query after we've already committed it, but before it's on
the standby, just emit a warning and let the COMMIT finish.
2. Don't ignore die interrupts (pg_terminate_backend or fast shutdown).
Instead, emit a warning message and close the connection without
acknowledging the commit. Other backends will still see the effect of
the commit, but there's no getting around that; it's too late to abort
at this point, and ignoring die interrupts altogether doesn't seem like
a good idea.
3. If synchronous_standby_names becomes empty, wake up all backends
waiting for synchronous replication to complete. Without this, someone
attempting to shut synchronous replication off could easily wedge the
entire system instead.
4. Avoid depending on the assumption that if a walsender updates
MyProc->syncRepState, we'll see the change even if we read it without
holding the lock. The window for this appears to be quite narrow (and
probably doesn't exist at all on machines with strong memory ordering)
but protecting against it is practically free, so do that.
5. Remove useless state SYNC_REP_MUST_DISCONNECT, which isn't needed and
doesn't actually do anything.
There's still some further work needed here to make the behavior of fast
shutdown plausible, but that looks complex, so I'm leaving it for a
separate commit. Review by Fujii Masao.
This has been broken for years, and I'm not sure why it has not been
noticed before, but now a very modern Cygwin breaks on it, and the fix
is clearly correct. Backpatching to all live branches.
This patch causes unknown-type Consts to be coerced to the resolved output
type of the set operation at parse time. Formerly such Consts were left
alone until late in the planning stage. The disadvantage of that approach
is that it disables some optimizations, because the planner sees the set-op
leaf query as having different output column types than the overall set-op.
We saw an example of that in a recent performance gripe from Claudio
Freire.
Fixing such a Const requires scribbling on the leaf query in
transformSetOperationTree, but that should be all right since if the leaf
query's semantics depended on that output column, it would already have
resolved the unknown to something else.
Most of the bulk of this patch is a simple adjustment of
transformSetOperationTree's API so that upper levels can get at the
TargetEntry containing a Const to be replaced: it now returns a list of
TargetEntries, instead of just the bare expressions.
This was required in pre-8.4 versions to allow the specification of
"ident sameuser", but sameuser is no longer required. It could be extended
to allow all parameters in the future, but should then apply to all
methods and not just ident.
We have a test that verifies that max(anyarray) will cope if the array
column elements aren't all the same array type. However, it's now possible
for that to produce a collation-related error message instead of the
expected one, if the first two column elements happen to be of the same
type and it's one that expects to be given collation info. Tweak the test
to ensure this doesn't happen. Per buildfarm member pika.
While this will give wrong answers when estimating selectivity for a
comparison operator that's using a non-default collation, the estimation
error probably won't be large; and anyway the former approach created
estimation errors of its own by trying to use a histogram that might have
been computed with some other collation. So we'll adopt this simplified
approach for now and perhaps improve it sometime in the future.
This patch incorporates changes from Andres Freund to make sure that
selfuncs.c passes a valid collation OID to any datatype-specific function
it calls, in case that function wants collation information. Said OID will
now always be DEFAULT_COLLATION_OID, but at least we won't get errors.
Add dummy returns before every potential division-by-zero in int8.c,
because apparently further "improvements" in gcc's optimizer have
enabled it to break functions that weren't broken before.
Aurelien Jarno, via Martin Pitt
CollateClause is now used only in raw grammar output, and CollateExpr after
parse analysis. This is for clarity and to avoid carrying collation names
in post-analysis parse trees: that's both wasteful and possibly misleading,
since the collation's name could be changed while the parsetree still
exists.
Also, clean up assorted infelicities and omissions in processing of the
node type.
Use collencoding = -1 to represent such a collation in pg_collation.
We need this to make the "default" entry work sanely, and a later
patch will fix the C/POSIX entries to be represented this way instead
of duplicating them across all encodings. All lookup operations now
search first for an entry that's database-encoding-specific, and then
for the same name with collencoding = -1.
Also some incidental code cleanup in collationcmds.c and pg_collation.c.
variable hiding. A constant is not a variable. It worked in most cases by
accident, because we add constants to the global list of variables (why?),
but float constants like 1.23 were interpreted as struct field references,
and not found.
Backpatch to 9.0, where the test for variable hiding was added.
Including collation in the behavior of that function promotes a world view
we do not want. Moreover, it was producing the wrong behavior for pg_dump
anyway: what we want is to dump a COLLATE clause on attributes whose
attcollation is different from the underlying type, and likewise for
domains, and the function cannot do that for us. Doing it the hard way
in pg_dump is a bit more tedious but produces more correct output.
In passing, fix initdb so that the initial entry in pg_collation is
properly pinned. It was droppable before :-(
It's not a good idea to kill the postmaster just because someone muffs
this, and it's not consistent with what we do for other, similar GUCs.
Fujii Masao, with a bit more hacking by me
SyncRepRequested() must check not only the value of the
synchronous_replication GUC but also whether max_wal_senders > 0.
Otherwise, we might end up waiting for sync rep even when there's no
possibility of a standby ever managing to connect. There are some
existing cross-checks to prevent this, but they're not quite sufficient:
the user can start the server with max_wal_senders=0,
synchronous_standby_names='', and synchronous_replication=off and then
subsequent make synchronous_standby_names not empty using pg_ctl reload,
and then SET synchronous_standby=on, leading to an indefinite hang.
Along the way, rename the global variable for the synchronous_replication
GUC to match the name of the GUC itself, for clarity.
Report by Fujii Masao, though I didn't use his patch.
In earlier versions of the sync rep patch, waiters removed themselves from
the queue, but now walsender removes them before doing the wakeup.
Report by Fujii Masao.
Tom Lane pointed out that it was giving a warning: "-s option given but
default rule can be matched". That was because there was no rule to handle
newline in a quoted string. I made that throw an error.
Also, line number tracking was broken, giving incorrect line number on
error. Fixed that too.
At least two recent commits have apparently imagined that a comment in
a Makefile stating that something would be included in the distribution
tarball was sufficient to make it so. They hadn't bothered to hook
into the upper maintainer-clean targets either. Per bug #5923 from
Charles Johnson, in which it emerged that the 9.1alpha4 tarballs are
short a few files that should be there.
The initial collations patch treated a COLLATE spec as part of a TypeName,
following what can only be described as brain fade on the part of the SQL
committee. It's a lot more reasonable to treat COLLATE as a syntactically
separate object, so that it can be added in only the productions where it
actually belongs, rather than needing to reject it in a boatload of places
where it doesn't belong (something the original patch mostly failed to do).
In addition this change lets us meet the spec's requirement to allow
COLLATE anywhere in the clauses of a ColumnDef, and it avoids unfriendly
behavior for constructs such as "foo::type COLLATE collation".
To do this, pull collation information out of TypeName and put it in
ColumnDef instead, thus reverting most of the collation-related changes in
parse_type.c's API. I made one additional structural change, which was to
use a ColumnDef as an intermediate node in AT_AlterColumnType AlterTableCmd
nodes. This provides enough room to get rid of the "transform" wart in
AlterTableCmd too, since the ColumnDef can carry the USING expression
easily enough.
Also fix some other minor bugs that have crept in in the same areas,
like failure to copy recently-added fields of ColumnDef in copyfuncs.c.
While at it, document the formerly secret ability to specify a collation
in ALTER TABLE ALTER COLUMN TYPE, ALTER TYPE ADD ATTRIBUTE, and
ALTER TYPE ALTER ATTRIBUTE TYPE; and correct some misstatements about
what the default collation selection will be when COLLATE is omitted.
BTW, the three-parameter form of format_type() should go away too,
since it just contributes to the confusion in this area; but I'll do
that in a separate patch.
Formerly, any member of a role could change the role's comment, as of
course could superusers; but holders of CREATEROLE privilege could not,
unless they were also members. This led to the odd situation that a
CREATEROLE holder could create a role but then could not comment on it.
It also seems a bit dubious to let an unprivileged user change his own
comment, let alone those of group roles he belongs to. So, change the
rule to be "you must be superuser to comment on a superuser role, or
hold CREATEROLE to comment on non-superuser roles". This is the same
as the privilege check for creating/dropping roles, and thus fits much
better with the rule for other object types, namely that only the owner
of an object can comment on it.
In passing, clean up the documentation for COMMENT a little bit.
Per complaint from Owen Jacobson and subsequent discussion.
In addition to the
all-foo-recurse: all-bar-recurse
dependencies that constraint the order of the rule execution, we need
install-foo-recurse: install-bar-recurse
dependencies in case one runs make install without a make all first,
as some people apparently do.
We really need an automated check for this ... and did VALIDATE really
need to become a keyword at all, rather than picking some other syntax
using existing keywords?
race condition where SummarizeOldestCommittedSxact() is called even though
another backend already cleared out all finished sxact entries. That's OK,
RegisterSerializableTransactionInt() can just retry getting a news xact
slot from the available-list when that happens.
Reported by YAMAMOTO Takashi, bug #5918.
