We store values for these options as array elements with the syntax
"name=value", hence a name containing "=" confuses matters when
it's time to read the array back in. Since validation of the
options is often done (long) after this conversion to array format,
that leads to confusing and off-point error messages. We can
improve matters by rejecting names containing "=" up-front.
(Probably a better design would have involved pairs of array
elements, but it's too late now --- and anyway, there's no
evident use-case for option names like this. We already
reject such names in some other contexts such as GUCs.)
Reported-by: Chapman Flack <jcflack@acm.org>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Chapman Flack <jcflack@acm.org>
Discussion: https://postgr.es/m/6830EB30.8090904@acm.org
Backpatch-through: 13
PLy_elog_impl and its subroutine PLy_traceback intended to avoid
leaking any PyObject reference counts, but their coverage of the
matter was sadly incomplete. In particular, out-of-memory errors
in most of the string-construction subroutines could lead to
reference count leaks, because those calls were outside the
PG_TRY blocks responsible for dropping reference counts.
Fix by (a) adjusting the scopes of the PG_TRY blocks, and
(b) moving the responsibility for releasing the reference counts
of the traceback-stack objects to PLy_elog_impl. This requires
some additional "volatile" markers, but not too many.
In passing, fix an ancient thinko: use of the "e_module_o" PyObject
was guarded by "if (e_type_s)", where surely "if (e_module_o)"
was meant. This would only have visible consequences if the
"__name__" attribute were present but the "__module__" attribute
wasn't, which apparently never happens; but someday it might.
Rearranging the PG_TRY blocks requires indenting a fair amount
of code one more tab stop, which I'll do separately for clarity.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2954090.1748723636@sss.pgh.pa.us
Backpatch-through: 13
A few places that access system catalogs don't set up an active
snapshot before potentially accessing their TOAST tables. To fix,
push an active snapshot just before each section of code that might
require accessing one of these TOAST tables, and pop it shortly
afterwards. While at it, this commit adds some rather strict
assertions in an attempt to prevent such issues in the future.
Commit 16bf24e0e4 recently removed pg_replication_origin's TOAST
table in order to fix the same problem for that catalog. On the
back-branches, those bugs are left in place. We cannot easily
remove a catalog's TOAST table on released major versions, and only
replication origins with extremely long names are affected. Given
the low severity of the issue, fixing older versions doesn't seem
worth the trouble of significantly modifying the patch.
Also, on v13 and v14, the aforementioned strict assertions have
been omitted because commit 2776922201, which added
HaveRegisteredOrActiveSnapshot(), was not back-patched. While we
could probably back-patch it now, I've opted against it because it
seems unlikely that new TOAST snapshot issues will be introduced in
the oldest supported versions.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/18127-fe54b6a667f29658%40postgresql.org
Discussion: https://postgr.es/m/18309-c0bf914950c46692%40postgresql.org
Discussion: https://postgr.es/m/ZvMSUPOqUU-VNADN%40nathan
Backpatch-through: 13
Our GSSAPI code only allows packet sizes up to 16kB. However it
emerges that during authentication, larger packets might be needed;
various authorities suggest 48kB or 64kB as the maximum packet size.
This limitation caused login failure for AD users who belong to many
AD groups. To add insult to injury, we gave an unintelligible error
message, typically "GSSAPI context establishment error: The routine
must be called again to complete its function: Unknown error".
As noted in code comments, the 16kB packet limit is effectively a
protocol constant once we are doing normal data transmission: the
GSSAPI code splits the data stream at those points, and if we change
the limit then we will have cross-version compatibility problems
due to the receiver's buffer being too small in some combinations.
However, during the authentication exchange the packet sizes are
not determined by us, but by the underlying GSSAPI library. So we
might as well just try to send what the library tells us to.
An unpatched recipient will fail on a packet larger than 16kB,
but that's not worse than the sender failing without even trying.
So this doesn't introduce any meaningful compatibility problem.
We still need a buffer size limit, but we can easily make it be
64kB rather than 16kB until transport negotiation is complete.
(Larger values were discussed, but don't seem likely to add
anything.)
Reported-by: Chris Gooch <cgooch@bamfunds.com>
Fix-suggested-by: Jacob Champion <jacob.champion@enterprisedb.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Discussion: https://postgr.es/m/DS0PR22MB5971A9C8A3F44BCC6293C4DABE99A@DS0PR22MB5971.namprd22.prod.outlook.com
Backpatch-through: 13
Previously, XactLockTableWait() and ConditionalXactLockTableWait() could enter
a non-interruptible loop when they successfully acquired a lock on a transaction
but the transaction still appeared to be running. Since this loop continued
until the transaction completed, it could result in long, uninterruptible waits.
Although this scenario is generally unlikely since XactLockTableWait() and
ConditionalXactLockTableWait() can basically acquire a transaction lock
only when the transaction is not running, it can occur in a hot standby.
In such cases, the transaction may still appear active due to
the KnownAssignedXids list, even while no lock on the transaction exists.
For example, this situation can happen when creating a logical replication
slot on a standby.
The cause of the non-interruptible loop was the absence of CHECK_FOR_INTERRUPTS()
within it. This commit adds CHECK_FOR_INTERRUPTS() to the loop in both functions,
ensuring they can be interrupted safely.
Back-patch to all supported branches.
Author: Kevin K Biju <kevinkbiju@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CAM45KeELdjhS-rGuvN=ZLJ_asvZACucZ9LZWVzH7bGcD12DDwg@mail.gmail.com
Backpatch-through: 13
The code that translates SIMILAR TO pattern matching expressions to
POSIX-style regular expressions did not consider that square brackets
can be nested. For example, in an expression like [[:alpha:]%_], the
logic replaced the placeholders '_' and '%' but it should not.
This commit fixes the conversion logic by tracking the nesting level of
square brackets marking character class areas, while considering that
in expressions like []] or [^]] the first closing square bracket is a
regular character. Multiple tests are added to show how the conversions
should or should not apply applied while in a character class area, with
specific cases added for all the characters converted outside character
classes like an opening parenthesis '(', dollar sign '$', etc.
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/16ab039d1af455652bdf4173402ddda145f2c73b.camel@cybertec.at
Backpatch-through: 13
In the grammar, <expr> is a c_expr, which accepts only a limited set
of simple constants and expressions without parens. The deparsing
logic didn't quite match the grammar rule, and failed to use parens
e.g. for "5::bigint".
To fix, always surround the expression with parens. Would be nice to
omit the parens in simple cases, but unfortunately it's non-trivial to
detect such simple cases. Even if the expression is a simple literal
123 in the original query, after parse analysis it becomes a FuncExpr
with COERCE_IMPLICIT_CAST rather than a simple Const.
Reported-by: yonghao lee
Backpatch-through: 13
Discussion: https://www.postgresql.org/message-id/18929-077d6b7093b176e2@postgresql.org
Per the letter of the C11 standard, one must #define
__STDC_WANT_LIB_EXT1__ as 1 before including <string.h> in order to
have access to memset_s(). It appears that many platforms are lenient
about this, because we weren't doing it and yet the code appeared to
work anyway. But we now find that with -std=c11, macOS is strict and
doesn't declare memset_s, leading to compile failures since we try to
use it anyway. (Given the lack of prior reports, perhaps this is new
behavior in the latest SDK? No matter, we're clearly in the wrong.)
In addition to the immediate problem, which could be fixed merely by
adding the needed #define to explicit_bzero.c, it seems possible that
our configure-time probe for memset_s() could fail in case a platform
implements the function in some odd way due to this spec requirement.
This concern can be fixed in largely the same way that we dealt with
strchrnul() in 6da2ba1d8: switch to using a declaration-based
configure probe instead of a does-it-link probe.
Back-patch to v13 where we started using memset_s().
Reported-by: Lakshmi Narayana Velayudam <dev.narayana.v@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAA4pTnLcKGG78xeOjiBr5yS7ZeE-Rh=FaFQQGOO=nPzA1L8yEA@mail.gmail.com
Backpatch-through: 13
With GB18030 as source encoding, applications could crash the server via
SQL functions convert() or convert_from(). Applications themselves
could crash after passing unterminated GB18030 input to libpq functions
PQescapeLiteral(), PQescapeIdentifier(), PQescapeStringConn(), or
PQescapeString(). Extension code could crash by passing unterminated
GB18030 input to jsonapi.h functions. All those functions have been
intended to handle untrusted, unterminated input safely.
A crash required allocating the input such that the last byte of the
allocation was the last byte of a virtual memory page. Some malloc()
implementations take measures against that, making the SIGSEGV hard to
reach. Back-patch to v13 (all supported versions).
Author: Noah Misch <noah@leadboat.com>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Backpatch-through: 13
Security: CVE-2025-4207
Start the file with static functions not specific to pe_test_vectors
tests. This way, new tests can use them without disrupting the file's
layout. Change report_result() PQExpBuffer arguments to plain strings.
Back-patch to v13 (all supported versions), for the next commit.
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Backpatch-through: 13
Security: CVE-2025-4207
For self-referencing foreign keys in partitioned tables, we weren't
handling creation of pg_constraint rows during CREATE TABLE PARTITION AS
as well as ALTER TABLE ATTACH PARTITION. This is an old bug -- mostly,
we broke this in 614a406b4f while trying to fix it (so 12.13, 13.9,
14.6 and 15.0 and up all behave incorrectly). This commit reverts part
of that with additional fixes for full correctness, and installs more
tests to verify the parts we broke, not just the catalog contents but
also the user-visible behavior.
Backpatch to all live branches. In branches 13 and 14, commit
46a8c27a72 changed the behavior during DETACH to drop a FK
constraint rather than trying to repair it, because the complete fix of
repairing catalog constraints was problematic due to lack of previous
fixes. For this reason, the test behavior in those branches is a bit
different. However, as best as I can tell, the fix works correctly
there.
In release notes we have to recommend that all self-referencing foreign
keys on partitioned tables be recreated if partitions have been created
or attached after the FK was created, keeping in mind that violating
rows might already be present on the referencing side.
Reported-by: Guillaume Lelarge <guillaume@lelarge.info>
Reported-by: Matthew Gabeler-Lee <fastcat@gmail.com>
Reported-by: Luca Vallisa <luca.vallisa@gmail.com>
Discussion: https://postgr.es/m/CAECtzeWHCA+6tTcm2Oh2+g7fURUJpLZb-=pRXgeWJ-Pi+VU=_w@mail.gmail.com
Discussion: https://postgr.es/m/18156-a44bc7096f0683e6@postgresql.org
Discussion: https://postgr.es/m/CAAT=myvsiF-Attja5DcWoUWh21R12R-sfXECY2-3ynt8kaOqjw@mail.gmail.com
DST law changes in Chile: there is a new time zone America/Coyhaique
for Chile's Aysén Region, to account for it changing to UTC-03
year-round and thus diverging from America/Santiago.
Historical corrections for Iran.
Backpatch-through: 13
During logical decoding, we advance catalog_xmin of logical too early in
fast_forward mode, resulting in required catalog data being removed by
vacuum. This mode is normally used to advance the slot without processing
the changes, but we still can't let the slot's xmin to advance to an
incorrect value.
Commit f49a80c481 fixed a similar issue where the logical slot's
catalog_xmin was getting advanced prematurely during non-fast-forward
mode. During xl_running_xacts processing, instead of directly advancing
the slot's xmin to the oldest running xid in the record, it allowed the
xmin to be held back for snapshots that can be used for
not-yet-replayed transactions, as those might consider older txns as
running too. However, it missed the fact that the same problem can happen
during fast_forward mode decoding, as we won't build a base snapshot in
that mode, and the future call to get_changes from the same slot can miss
seeing the required catalog changes leading to incorrect reslts.
This commit allows building the base snapshot even in fast_forward mode to
prevent the early advancement of xmin.
Reported-by: Amit Kapila <amit.kapila16@gmail.com>
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 13
Discussion: https://postgr.es/m/CAA4eK1LqWncUOqKijiafe+Ypt1gQAQRjctKLMY953J79xDBgAg@mail.gmail.com
Discussion: https://postgr.es/m/OS0PR01MB57163087F86621D44D9A72BF94BB2@OS0PR01MB5716.jpnprd01.prod.outlook.com
This commit is a backpatch of commit 4909b38af0 for 13.
Data loss can happen when the DDLs like ALTER PUBLICATION ... ADD TABLE ...
or ALTER TYPE ... that don't take a strong lock on table happens
concurrently to DMLs on the tables involved in the DDL. This happens
because logical decoding doesn't distribute invalidations to concurrent
transactions and those transactions use stale cache data to decode the
changes. The problem becomes bigger because we keep using the stale cache
even after those in-progress transactions are finished and skip the
changes required to be sent to the client.
This commit fixes the issue by distributing invalidation messages from
catalog-modifying transactions to all concurrent in-progress transactions.
This allows the necessary rebuild of the catalog cache when decoding new
changes after concurrent DDL.
The fix for 13 is different from what we did in branches 14 and above,
such that for 13, the concurrent DDL changes (from DDL types mentioned
earlier) will be visible for any newly started transactions. To make them
visible in concurrent transactions, we need to introduce a new change type
REORDER_BUFFER_CHANGE_INVALIDATION, already present in branches 14 and
greater. We decided not to take the risk of a bigger change and fix the
issue partially in 13.
Reported-by: hubert depesz lubaczewski <depesz@depesz.com>
Reported-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Author: Shlok Kyal <shlok.kyal.oss@gmail.com>
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Tested-by: Benoit Lobréau <benoit.lobreau@dalibo.com>
Discussion: https://postgr.es/m/de52b282-1166-1180-45a2-8d8917ca74c6@enterprisedb.com
Discussion: https://postgr.es/m/CAD21AoAenVqiMjpN-PvGHL1N9DWnHSq673bfgr6phmBUzx=kLQ@mail.gmail.com
Discussion: https://postgr.es/m/CAD21AoAhU3kp8shYqP=ExiFDZ9sZxpFb5WzLa0p+vEe5j+7CWQ@mail.gmail.com
v14 commit 1f95181b44 and its v13
equivalent caused timing-dependent failures in archive recovery, at
restartpoints. The symptom was "invalid magic number 0000 in log
segment X, offset 0", "unexpected pageaddr X in log segment Y, offset 0"
[X < Y], or an assertion failure. Commit
3635a0a35a and predecessors back-patched
v15 changes to fix that. This test reproduces the problem
probabilistically, typically in less than 1000 iterations of the test.
Hence, buildfarm and CI runs would have surfaced enough failures to get
attention within a day.
Reported-by: Arun Thirupathi <arunth@google.com>
Discussion: https://postgr.es/m/20250306193013.36.nmisch@google.com
Backpatch-through: 13
Commit 7102070329 fixed a similar bug, but
it missed the case of database-wide ANALYZE ("use_own_xacts" mode).
Commit a07e03fd8f changed consequences
from silent discard of a pg_class stats (relpages et al.) update to
ERROR "tuple to be updated was already modified". Losing a relpages
update of an ON COMMIT DELETE ROWS table was negligible, but a
COMMIT-time error isn't negligible. Back-patch to v13 (all supported
versions).
Reported-by: Richard Guo <guofenglinux@gmail.com
Reported-by: Robins Tharakan <tharakan@gmail.com>
Discussion: https://postgr.es/m/CAMbWs4-XwMKMKJ_GT=p3_-_=j9rQSEs1FbDFUnW9zHuKPsPNEQ@mail.gmail.com
Backpatch-through: 13
We'd try to drop the partitions of a partitioned index separately,
which is disallowed by the backend, leading to an error during
restore. While the error is harmless, it causes problems if you
try to use --single-transaction mode.
Fortunately, there seems no need to do a DROP at all, since the
partition will go away silently when we drop either the parent index
or the partition's table. So just make the DROP conditional on not
being a partition.
Reported-by: jian he <jian.universality@gmail.com>
Author: jian he <jian.universality@gmail.com>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CACJufxF0QSdkjFKF4di-JGWN6CSdQYEAhGPmQJJCdkSZtd=oLg@mail.gmail.com
Backpatch-through: 13
Commit 0f21db36d made an assumption that GIN triConsistentFns
would not modify their input entryRes[] arrays. But in fact,
the "shim" triConsistentFn that we use for opclasses that don't
supply their own did exactly that, potentially leading to wrong
answers from a GIN index search. Through bad luck, none of the
test cases that we have for such opclasses exposed the bug.
One response to this could be that the assumption of consistency check
functions not modifying entryRes[] arrays is a bad one, but it still
seems reasonable to me. Notably, shimTriConsistentFn is itself
assuming that with respect to the underlying boolean consistentFn,
so it's sure being self-centered in supposing that it gets to do so.
Fortunately, it's quite simple to fix shimTriConsistentFn to restore
the entry-time state of entryRes[], so let's do that instead.
This issue doesn't affect any core GIN opclasses, since they all
supply their own triConsistentFns. It does affect contrib modules
btree_gin, hstore, and intarray.
Along the way, I (tgl) noticed that shimTriConsistentFn failed to
pick up on a "recheck" flag returned by its first call to the boolean
consistentFn. This may be only a latent problem, since it would be
unlikely for a consistentFn to set recheck for the all-false case
and not any other cases. (Indeed, none of our contrib modules do
that.) Nonetheless, it's formally wrong.
Reported-by: Vinod Sridharan <vsridh90@gmail.com>
Author: Vinod Sridharan <vsridh90@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAFMdLD7XzsXfi1+DpTqTgrD8XU0i2C99KuF=5VHLWjx4C1pkcg@mail.gmail.com
Backpatch-through: 13
synchronous_standby_names cannot be reloaded safely by backends, and the
checkpointer is in charge of updating a state in shared memory if the
GUC is enabled in WalSndCtl, to let the backends know if they should
wait or not for a given LSN. This provides a strict control on the
timing of the waiting queues if the GUC is enabled or disabled, then
reloaded. The checkpointer is also in charge of waking up the backends
that could be waiting for a LSN when the GUC is disabled.
This logic had a race condition at startup, where it would be possible
for backends to not wait for a LSN even if synchronous_standby_names is
enabled. This would cause visibility issues with transactions that we
should be waiting for but they were not. The problem lasts until the
checkpointer does its initial update of the shared memory state when it
loads synchronous_standby_names.
In order to take care of this problem, the shared memory state in
WalSndCtl is extended to detect if it has been initialized by the
checkpointer, and not only check if synchronous_standby_names is
defined. In WalSndCtlData, sync_standbys_defined is renamed to
sync_standbys_status, a bits8 able to know about two states:
- If the shared memory state has been initialized. This flag is set by
the checkpointer at startup once, and never removed.
- If synchronous_standby_names is known as defined in the shared memory
state. This is the same as the previous sync_standbys_defined in
WalSndCtl.
This method gives a way for backends to decide what they should do until
the shared memory area is initialized, and they now ultimately fall back
to a check on the GUC value in this case, which is the best thing that
can be done.
Fortunately, SyncRepUpdateSyncStandbysDefined() is called immediately by
the checkpointer when this process starts, so the window is very narrow.
It is possible to enlarge the problematic window by making the
checkpointer wait at the beginning of SyncRepUpdateSyncStandbysDefined()
with a hardcoded sleep for example, and doing so has showed that a 2PC
visibility test is indeed failing. On machines slow enough, this bug
would cause spurious failures.
In 17~, we have looked at the possibility of adding an injection point
to have a reproducible test, but as the problematic window happens at
early startup, we would need to invent a way to make an injection point
optionally persistent across restarts when attached, something that
would be fine for this case as it would involve the checkpointer. This
issue is quite old, and can be reproduced on all the stable branches.
Author: Melnikov Maksim <m.melnikov@postgrespro.ru>
Co-authored-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/163fcbec-900b-4b07-beaa-d2ead8634bec@postgrespro.ru
Backpatch-through: 13
After commit cc2c7d65fc added this flag,
failure to reset it caused assertion failures. In non-assert builds, it
made the system fail to achieve the objectives listed in that commit;
chiefly, we might emit a spurious log message. Back-patch to v15, where
that commit first appeared.
Bharath Rupireddy and Kyotaro Horiguchi. Reviewed by Dilip Kumar,
Nathan Bossart and Michael Paquier. Reported by Dilip Kumar.
This commit has been applied as of b4f584f9d2 in v15 and newer
versions. This is required on stable branches of v13 and v14 to fix a
regression reported by Noah Misch, introduced by 1f95181b44, causing
spurious failures in archive recovery (neither streaming nor archive
recovery) with concurrent restartpoints. The backpatched versions of
the patches have been aligned on these branches by me. Tests have been
conducted by the both of us.
Discussion: https://postgr.es/m/CAFiTN-sE3ry=ycMPVtC+Djw4Fd7gbUGVv_qqw6qfzp=JLvqT3g@mail.gmail.com
Discussion: https://postgr.es/m/20250306193013.36.nmisch@google.com
Backpatch-through: 13
The previous commit addressed the chief consequences of a race condition
between InstallXLogFileSegment() and KeepFileRestoredFromArchive(). Fix
three lesser consequences. A spurious durable_rename_excl() LOG message
remained possible. KeepFileRestoredFromArchive() wasted the proceeds of
WAL recycling and preallocation. Finally, XLogFileInitInternal() could
return a descriptor for a file that KeepFileRestoredFromArchive() had
already unlinked. That felt like a recipe for future bugs.
This commit has been applied as of cc2c7d65fc in v15 and newer
versions. This is required on stable branches of v13 and v14 to fix a
regression reported by Noah Misch, introduced by 1f95181b44, causing
spurious failures in archive recovery (neither streaming nor archive
recovery) with concurrent restartpoints. The backpatched versions of
the patches have been aligned on these branches by me, Noah Misch is the
author. Tests have been conducted by the both of us.
Note that this commit is known to have introduced a regression of its
own. This is fixed by the commit following this one, and not grouped in
a single commit to keep the commit history consistent across all
branches.
Reported-by: Arun Thirupathi
Author: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20210202151416.GB3304930@rfd.leadboat.com
Discussion: https://postgr.es/m/20250306193013.36.nmisch@google.com
Backpatch-through: 13
Before a restartpoint finishes PreallocXlogFiles(), a startup process
KeepFileRestoredFromArchive() call can unlink the preallocated segment.
If a CHECKPOINT sql command had elicited the restartpoint experiencing
the race condition, that sql command failed. Moreover, the restartpoint
omitted its log_checkpoints message and some inessential resource
reclamation. Prevent the ERROR by skipping open() of the segment.
Since these consequences are so minor, no back-patch.
This commit has been applied as of 2b3e4672f7 in v15 and newer
versions. This is required on stable branches of v13 and v14 to fix a
regression reported by Noah Misch, introduced by 1f95181b44, causing
spurious failures in archive recovery (neither streaming nor archive
recovery) with concurrent restartpoints. The backpatched versions of
the patches have been aligned on these branches by me, Noah Misch is the
author. Tests have been conducted by the both of us.
Reported-by: Arun Thirupathi
Author: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20210202151416.GB3304930@rfd.leadboat.com
Discussion: https://postgr.es/m/20250306193013.36.nmisch@google.com
Backpatch-through: 13
This reverts commit 8ad6c5dbbe, which was a commit specific to v14 and
older branches as the race condition between restartpoints and
KeepFileRestoredFromArchive() still existed.
1f95181b44 has worsened the situation on these two branches, causing
spurious failures in archive recovery (neither streaming nor archive
recovery) with concurrent restartpoints. The same logic as v15 and
newer versions will be applied in some follow-up commits to close this
problem, making this HINT not necessary anymore.
Reported-by: Arun Thirupathi
Discussion: https://postgr.es/m/20250306193013.36.nmisch@google.com
Backpatch-through: 13
Only initdb used it. initdb refuses to operate on a non-empty directory
and generally does not cope with pre-existing files of other kinds.
Hence, use the opportunity to simplify.
This commit has been applied as of 421484f79c in v15 and newer
versions. This is required on stable branches of v13 and v14 to fix a
regression reported by Noah Misch, introduced by 1f95181b44, causing
spurious failures in archive recovery (neither streaming nor archive
recovery) with concurrent restartpoints. The backpatched versions of
the patches have been aligned on these branches by me, Noah Misch is the
author. Tests have been conducted by the both of us.
Reported-by: Arun Thirupathi
Author: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20210202151416.GB3304930@rfd.leadboat.com
Discussion: https://postgr.es/m/20250306193013.36.nmisch@google.com
Backpatch-through: 13
Infrequently, the mismatch caused log_checkpoints messages and
TRACE_POSTGRESQL_CHECKPOINT_DONE() to witness an "added" count too high
by one. Since that consequence is so minor, no back-patch.
This commit has been applied as of 85656bc305 in v15 and newer
versions. This is required on stable branches of v13 and v14 to fix a
regression reported by Noah Misch, introduced by 1f95181b44, causing
spurious failures in archive recovery (neither streaming nor archive
recovery) with concurrent restartpoints. The backpatched versions of
the patches have been aligned on these branches by me, Noah Misch is the
author. Tests have been conducted by the both of us.
Reported-by: Arun Thirupathi
Author: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20210202151416.GB3304930@rfd.leadboat.com
Discussion: https://postgr.es/m/20250306193013.36.nmisch@google.com
Backpatch-through: 13
Cold paths, initdb and end-of-recovery, used it. Don't optimize them.
This commit has been applied as of c53c6b98d3 in v15 and newer
versions. This is required on stable branches of v13 and v14 to fix a
regression reported by Noah Misch, introduced by 1f95181b44, causing
spurious failures in archive recovery (neither streaming nor archive
recovery) with concurrent restartpoints. The backpatched versions of
the patches have been aligned on these branches by me, Noah Misch is the
author. Tests have been conducted by the both of us.
Reported-by: Arun Thirupathi
Author: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20210202151416.GB3304930@rfd.leadboat.com
Discussion: https://postgr.es/m/20250306193013.36.nmisch@google.com
Backpatch-through: 13
makeDependencyGraphWalker thought that only SelectStmt nodes could
contain a WithClause. Which was true in our original implementation
of WITH, but astonishingly we missed updating this code when we added
the ability to attach WITH to INSERT/UPDATE/DELETE (and later MERGE).
Moreover, since it was coded to deliberately block recursion to a
WithClause, even updating raw_expression_tree_walker didn't save it.
The upshot of this was that we didn't see references to outer CTE
names appearing within an inner WITH, and would neither complain about
disallowed recursion nor account for such references when sorting CTEs
into a usable order. The lack of complaints about this is perhaps not
so surprising, because typical usage of WITH wouldn't hit either case.
Still, it's pretty broken; failing to detect recursion here leads to
assert failures or worse later on.
Fix by factoring out the processing of sub-WITHs into a new function
WalkInnerWith, and invoking that for all the statement types that
can have WITH.
Bug: #18878
Reported-by: Yu Liang <luy70@psu.edu>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/18878-a26fa5ab6be2f2cf@postgresql.org
Backpatch-through: 13
Commit 28d3c2ddcf introduced an assertion that if the memorized
downlink location in the insertion stack isn't valid, the parent's
LSN should've changed too. Turns out that was too strict. In
gistFindCorrectParent(), if we walk right, we update the parent's
block number and clear its memorized 'downlinkoffnum'. That triggered
the assertion on next call to gistFindCorrectParent(), if the parent
needed to be split too. Relax the assertion, so that it's OK if
downlinkOffnum is InvalidOffsetNumber.
Backpatch to v13-, all supported versions. The assertion was added in
commit 28d3c2ddcf in v12.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Tender Wang <tndrwang@gmail.com>
Discussion: https://www.postgresql.org/message-id/18396-03cac9beb2f7aac3@postgresql.org
The regression test for logical decoding verifies whether a logical slot
is correctly dropped on a standby when its associated database is dropped.
However, the test mistakenly retrieved slot information from the primary
instead of the standby, causing incorrect behavior.
This commit fixes the issue by ensuring the test correctly checks the slot
on the standby.
Back-patch to all supported versions.
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/1fdfd020-a509-403c-bd8f-a04664aba148@oss.nttdata.com
Backpatch-through: 13
The regression tests for logical decoding verify whether a logical slot
exists or has been dropped. Previously, these tests attempted to
retrieve "slot_name" from the result of slot(), but since "slot_name" was
not included in the result, slot()->{'slot_name'} always returned undef,
leading to incorrect behavior.
This commit fixes the issue by checking the "plugin" field in the result
of slot() instead, ensuring the tests properly verify slot existence.
Back-patch to all supported versions.
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/OSCPR01MB149667EC4E738769CA80B7EA5F5AE2@OSCPR01MB14966.jpnprd01.prod.outlook.com
Backpatch-through: 13
This replaces dblink's blocking libpq calls, allowing cancellation and
allowing DROP DATABASE (of a database not involved in the query). Apart
from explicit dblink_cancel_query() calls, dblink still doesn't cancel
the remote side. The replacement for the blocking calls consists of
new, general-purpose query execution wrappers in the libpqsrv facility.
Out-of-tree extensions should adopt these.
The original commit d3c5f37dd5 did not
back-patch. Back-patch now to v16-v13, bringing coverage to all supported
versions. This back-patch omits the orignal's refactoring in postgres_fdw.
Discussion: https://postgr.es/m/20231122012945.74@rfd.leadboat.com
Currently dblink and postgres_fdw don't process interrupts during connection
establishment. Besides preventing query cancellations etc, this can lead to
undetected deadlocks, as global barriers are not processed.
Libpqwalreceiver in contrast, processes interrupts during connection
establishment. The required code is not trivial, so duplicating it into
additional places does not seem like a good option.
These aforementioned undetected deadlocks are the reason for the spate of CI
test failures in the FreeBSD 'test_running' step.
For now the helper library is just a header, as it needs to be linked into
each extension using libpq, and it seems too small to be worth adding a
dedicated static library for.
The conversion to the helper are done in subsequent commits.
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20220925232237.p6uskba2dw6fnwj2@awork3.anarazel.de
compareentry() is declared to work on WordEntryIN structs, but
tsvectorrecv() is using it in two places to work on WordEntry
structs. This is almost okay, since WordEntry is the first
field of WordEntryIN. But on machines with 8-byte pointers,
WordEntryIN will have a larger alignment spec than WordEntry,
and it's at least theoretically possible that the compiler
could generate code that depends on the larger alignment.
Given the lack of field reports, this may be just a hypothetical bug
that upsets nothing except sanitizer tools. Or it may be real on
certain hardware but nobody's tried to use tsvectorrecv() on such
hardware. In any case we should fix it, and the fix is trivial:
just change compareentry() so that it works on WordEntry without any
mention of WordEntryIN. We can also get rid of the quite-useless
intermediate function WordEntryCMP.
Bug: #18875
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/18875-07a29c49c825a608@postgresql.org
Backpatch-through: 13
The optimization does not take the removal of TIDs by a concurrent vacuum into
account. The concurrent vacuum can remove dead TIDs and make pages ALL_VISIBLE
while those dead TIDs are referenced in the bitmap. This can lead to a
skip_fetch scan returning too many tuples.
It likely would be possible to implement this optimization safely, but we
don't have the necessary infrastructure in place. Nor is it clear that it's
worth building that infrastructure, given how limited the skip_fetch
optimization is.
In the backbranches we just disable the optimization by always passing
need_tuples=true to table_beginscan_bm(). We can't perform API/ABI changes in
the backbranches and we want to make the change as minimal as possible.
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reported-By: Konstantin Knizhnik <knizhnik@garret.ru>
Discussion: https://postgr.es/m/CAEze2Wg3gXXZTr6_rwC+s4-o2ZVFB5F985uUSgJTsECx6AmGcQ@mail.gmail.com
Backpatch-through: 13
Without this, an additional change to the same pg_attribute row
within the same command will fail. This is possible at least with
ALTER TABLE ADD COLUMN on a multiple-inheritance-pathway structure.
(Another potential hazard is that immediately-following operations
might not see the missingval.)
Introduced by 95f650674, which split the former coding that
used a single pg_attribute update to change both atthasdef and
atthasmissing/attmissingval into two updates, but missed that
this should entail two CommandCounterIncrements as well. Like
that fix, back-patch through v13.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: Tender Wang <tndrwang@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/025a3ffa-5eff-4a88-97fb-8f583b015965@gmail.com
Backpatch-through: 13
As of 15.4, macOS has strchrnul(), but access to it is blocked behind
a check for MACOSX_DEPLOYMENT_TARGET >= 15.4. But our does-it-link
configure check finds it, so we try to use it, and fail with the
present default deployment target (namely 15.0). This accounts for
today's buildfarm failures on indri and sifaka.
This is the identical problem that we faced some years ago when Apple
introduced preadv and pwritev in the same way. We solved that in
commit f014b1b9b by using AC_CHECK_DECLS instead of AC_CHECK_FUNCS
to check the functions' availability. So do the same now for
strchrnul(). Interestingly, we already had a workaround for
"the link check doesn't agree with <string.h>" cases with glibc,
which we no longer need since only the header declaration is being
checked.
Testing this revealed that the meson version of this check has never
worked, because it failed to use "-Werror=unguarded-availability-new".
(Apparently nobody's tried to build with meson on macOS versions that
lack preadv/pwritev as standard.) Adjust that while at it. Also,
we had never put support for "-Werror=unguarded-availability-new"
into v13, but we need that now.
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Co-authored-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/385134.1743523038@sss.pgh.pa.us
Backpatch-through: 13
The implementation of FSM for indexes is simpler than heap, where 0 is
used to track if a page is in-use and (BLCKSZ - 1) if a page is free.
One comment in indexfsm.c and one description in the documentation of
pg_freespacemap were incorrect about that.
Author: Alex Friedman <alexf01@gmail.com>
Discussion: https://postgr.es/m/71eef655-c192-453f-ac45-2772fec2cb04@gmail.com
Backpatch-through: 13
exec_save_simple_expr did not account for the possibility that
standard_planner would stick a Materialize node atop the plan
of even a simple Result, if CURSOR_OPT_SCROLL is set. This led
to an "unexpected plan node type" error.
This is a very old bug, but it'd only be reached by declaring a
cursor for a "SELECT simple-expression" query and explicitly
marking it scrollable, which is an odd thing to do. So the lack
of prior reports isn't too surprising.
Bug: #18859
Reported-by: Olleg Samoylov <splarv@ya.ru>
Author: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/18859-0d5f28ac99a37059@postgresql.org
Backpatch-through: 13
If the given input_type yields valid results from both
get_element_type and get_array_type, initArrayResultAny believed the
former and treated the input as an array type. However this is
inconsistent with what get_promoted_array_type does, leading to
situations where the output of an ARRAY() subquery is labeled with
the wrong type: it's labeled as oidvector[] but is really a 2-D
array of OID. That at least results in strange output, and can
result in crashes if further processing such as unnest() is applied.
AFAIK this is only possible with the int2vector and oidvector
types, which are special-cased to be treated mostly as true arrays
even though they aren't quite.
Fix by switching the logic to match get_promoted_array_type by
testing get_array_type not get_element_type, and remove an Assert
thereby made pointless. (We need not introduce a symmetrical
check for get_element_type in the other if-branch, because
initArrayResultArr will check it.) This restores the behavior
that existed before bac27394a introduced initArrayResultAny:
the output really is int2vector[] or oidvector[].
Comparable confusion exists when an input of an ARRAY[] construct
is int2vector or oidvector: transformArrayExpr decides it's dealing
with a multidimensional array constructor, and we end up with
something that's a multidimensional OID array but is alleged to be
of type oidvector. I have not found a crashing case here, but it's
easy to demonstrate totally-wrong results. Adjust that code so
that what you get is an oidvector[] instead, for consistency with
ARRAY() subqueries. (This change also makes these types work like
domains-over-arrays in this context, which seems correct.)
Bug: #18840
Reported-by: yang lei <ylshiyu@126.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/18840-fbc9505f066e50d6@postgresql.org
Backpatch-through: 13
Letting the rewriter keep RangeTblEntry.relid when expanding a view
RTE, without making the outfuncs/readfuncs changes that went along
with that originally, is more problematic than I realized. It causes
WRITE_READ_PARSE_PLAN_TREES testing to fail because outfuncs/readfuncs
don't think relid need be saved in an RTE_SUBQUERY RTE.
There doesn't seem to be any other good route to fixing the whole-row
Var problem solved at f4e7756ef, so we just have to deal with the
consequences. We can make the eventually-produced plan tree safe
for WRITE_READ_PARSE_PLAN_TREES by clearing the relid field at the
end of planning, as was already being done for the functions field.
(The functions field is not problematic here because our abuse of it
is strictly local to the planner.) However, there is no nice fix for
the post-rewrite WRITE_READ_PARSE_PLAN_TREES test.
The solution adopted here is to remove the post-rewrite test in the
affected branches. That's surely less than ideal, but a couple of
arguments can be made why it's not unacceptable. First, the behavior
of outfuncs/readfuncs for parsetrees in these branches is frozen no
matter what, because of catalog stability requirements. So we're not
testing anything that is going to change. Second, testing
WRITE_READ_PARSE_PLAN_TREES at this particular time doesn't correspond
to any direct system functionality requirement, neither rule storage
nor plan transmission.
Reported-by: Andres Freund <andres@anarazel.de>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/3518c50a-ab18-482f-b916-a37263622501@deepbluecap.com
Backpatch-through: 13-15
makeWholeRowVar() has different rules for constructing a
whole-row Var depending on the kind of RTE it's representing.
This turns out to be problematic because the rewriter and planner
can convert view RTEs and set-returning-function RTEs into
subquery RTEs; so a whole-row Var made during planning might
look different from one made by the parser. In isolation this
doesn't cause any problem, but if a query contains Vars made
both ways for the same varno, there are cross-checks in the
executor that will complain. This manifests for UPDATE, DELETE,
and MERGE queries that use whole-row table references.
To fix, we need makeWholeRowVar() to produce the same result
from an inlined RTE as it would have for the original. For
an inlined view, we can use RangeTblEntry.relid to detect
that this had been a view RTE. For inlined SRFs, make a
data structure definition change akin to commit 47bb9db75,
and say that we won't clear RangeTblEntry.functions until
the end of planning. That allows makeWholeRowVar() to
repeat what it would have done with the unmodified RTE.
Reported-by: Duncan Sands <duncan.sands@deepbluecap.com>
Reported-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Diagnosed-by: Tender Wang <tndrwang@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/3518c50a-ab18-482f-b916-a37263622501@deepbluecap.com
Backpatch-through: 13
When the rewriter converts an RTE_RELATION RTE for a view into
an RTE_SUBQUERY RTE containing the view's defining query, leave
the relid field alone instead of zeroing it. This allows the
planner to tell that the subquery came from a view rather than
having been written in-line, which is needed to support an
upcoming planner bug fix. We cannot change the behavior of the
outfuncs/readfuncs code in released branches, so the relid field
will not survive in plans passed to parallel workers; therefore
this info should not be relied on in the executor.
This back-patches a portion of the data structure definitional
changes made in v16 and up by commit 47bb9db75. It's being
committed separately for visibility in the commit log, but
with luck it will not actually matter to anyone. While it's
not inconceivable that this change will break code expecting
relid to be zero in a subquery RTE, we can hope that such code
has already been adjusted to cope with v16 and up.
Reported-by: Duncan Sands <duncan.sands@deepbluecap.com>
Diagnosed-by: Tender Wang <tndrwang@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/3518c50a-ab18-482f-b916-a37263622501@deepbluecap.com
Backpatch-through: 13-15
With improperly defined operator classes, it's possible to get a
Postgres crash because we'd try to invoke a procedure that doesn't
exist. This is because the code is being a bit too trusting that the
opclass is correctly defined. Add some ereport(ERROR)s for cases where
mandatory support procedures are not defined, transforming the crashes
into errors.
The particular case that was reported is an incomplete opclass in
PostGIS.
Backpatch all the way down to 13.
Reported-by: Tobias Wendorff <tobias.wendorff@tu-dortmund.de>
Diagnosed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Discussion: https://postgr.es/m/fb6d9a35-6c8e-4869-af80-0a4944a793a4@tu-dortmund.de
