pg_size_pretty(bigint) would return the value in bytes rather than PB
for the smallest-most bigint value. This happened due to an incorrect
assumption that the absolute value of -9223372036854775808 could be
stored inside a signed 64-bit type.
Here we fix that by instead storing that value in an unsigned 64-bit type.
This bug does exist in versions prior to 15 but the code there is
sufficiently different and the bug seems sufficiently non-critical that
it does not seem worth risking backpatching further.
Author: Joseph Koshakow <koshy44@gmail.com>
Discussion: https://postgr.es/m/CAAvxfHdTsMZPWEHUrZ=h3cky9Ccc3Mtx2whUHygY+ABP-mCmUw@mail.gmail.com
Backpatch-through: 15
Commit 453c468737 introduced a use of strerror() into libpq, but that
is not thread-safe. Fix by using strerror_r() instead.
In passing, update some of the code comments added by 453c468737, as
we have learned more about the reason for the change in OpenSSL that
started this.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: Discussion: https://postgr.es/m/b6fb018b-f05c-4afd-abd3-318c649faf18@highgo.ca
When a standby is promoted, CleanupAfterArchiveRecovery() may decide
to rename the final WAL file from the old timeline by adding ".partial"
to the name. If WAL summarization is enabled and this file is renamed
before its partial contents are summarized, WAL summarization breaks:
the summarizer gets stuck at that point in the WAL stream and just
errors out.
To fix that, first make the startup process wait for WAL summarization
to catch up before renaming the file. Generally, this should be quick,
and if it's not, the user can shut off summarize_wal and try again.
To make this fix work, also teach the WAL summarizer that after a
promotion has occurred, no more WAL can appear on the previous
timeline: previously, the WAL summarizer wouldn't switch to the new
timeline until we actually started writing WAL there, but that meant
that when the startup process was waiting for the WAL summarizer, it
was waiting for an action that the summarizer wasn't yet prepared to
take.
In the process of fixing these bugs, I realized that the logic to wait
for WAL summarization to catch up was spread out in a way that made
it difficult to reuse properly, so this code refactors things to make
it easier.
Finally, add a test case that would have caught this bug and the
previously-fixed bug that WAL summarization sometimes needs to back up
when the timeline changes.
Discussion: https://postgr.es/m/CA+TgmoZGEsZodXC4f=XZNkAeyuDmWTSkpkjCEOcF19Am0mt_OA@mail.gmail.com
The old code believed that it was not possible to switch timelines
without first replaying all of the WAL from the old timeline, but
that turns out to be false, as demonstrated by an example from Fujii
Masao. As a result, it assumed that summarization would always
continue from the LSN where summarization previously ended. But in
fact, when a timeline switch occurs without replaying all the WAL
from the previous timeline, we can need to back up to an earlier
LSN. Adjust accordingly.
Discussion: https://postgr.es/m/CA+TgmoZGEsZodXC4f=XZNkAeyuDmWTSkpkjCEOcF19Am0mt_OA@mail.gmail.com
Commit 86db52a506 changed the locking of injection points to use only
atomic ops and spinlocks, to make it possible to define injection
points in processes that don't have a PGPROC entry (yet). However, it
didn't work in EXEC_BACKEND mode, because the pointer to shared memory
area was not initialized until the process "attaches" to all the
shared memory structs. To fix, pass the pointer to the child process
along with other global variables that need to be set up early.
Backpatch-through: 17
With sslmode=prefer, the desired behavior is to completely fail the
connection attempt, *not* fall back to a plaintext connection, if the
server responds to the SSLRequest with an error ('E') response instead
of rejecting SSL with an 'N' response. This was broken in commit
05fd30c0e7.
Reported-by: Jacob Champion
Reviewed-by: Michael Paquier
Discussion: https://www.postgresql.org/message-id/CAOYmi%2Bnwvu21mJ4DYKUa98HdfM_KZJi7B1MhyXtnsyOO-PB6Ww%40mail.gmail.com
Backpatch-through: 17
OpenSSL supports two types of session tickets for TLSv1.3, stateless
and stateful. The option we've used only turns off stateless tickets
leaving stateful tickets active. Use the new API introduced in 1.1.1
to disable all types of tickets.
Backpatch to all supported versions.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20240617173803.6alnafnxpiqvlh3g@awork3.anarazel.de
Backpatch-through: v12
populate_domain() didn't take into account the omit_quotes flag passed
down to json_populate_type() by ExecEvalJsonCoercion() and that led
to incorrect behavior when the RETURNING type is a domain over
jsonb. Fix that by passing the flag by adding a new function
parameter to populate_domain().
Reported-by: Jian He <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CACJufxEo4sUjKCYtda0_qt9tazqqKPmF1cqhW9KBOUeJFqQd2g@mail.gmail.com
Backpatch-through: 17
Instead of returning a NULL when the JsonBehavior expression value
could not be coerced to the RETURNING type, throw the error message
informing the user that it is the JsonBehavior expression that caused
the error with the actual coercion error message shown in its DETAIL
line.
Discussion: https://postgr.es/m/CACJufxEo4sUjKCYtda0_qt9tazqqKPmF1cqhW9KBOUeJFqQd2g@mail.gmail.com
Backpatch-through: 17
To ensure that the errors of executing a JsonBehavior expression that
is coerced in the parser are caught instead of being thrown directly,
pass ErrorSaveContext to ExecInitExprRec() when initializing it.
Also, add a EEOP_JSONEXPR_COERCION_FINISH step to handle the errors
that are caught that way.
Discussion: https://postgr.es/m/CACJufxEo4sUjKCYtda0_qt9tazqqKPmF1cqhW9KBOUeJFqQd2g@mail.gmail.com
Backpatch-through: 17
If you try to take an incremental backup on a standby and there hasn't
been much system activity, it might fail. Document why this happens.
Also add a hint to the error message you get, to make it more likely
that users will understand what has gone wrong.
Laurenz Albe and Robert Haas
Discussion: https://postgr.es/m/5468641ad821dad7aa3b2d65bf843146443a1b68.camel@cybertec.at
Commit d01ce180 invented a new way to find the latest MacPorts version.
By bad luck, a new beta release has just been published, and it seems
to lack some packages we need. Go back to searching for this specific
version for now. We still search with a pattern so that we can find the
package for the running version of macOS, but for now we always look for
2.9.3. The code to do that had been anticipated already in a commented
out line, I just didn't expect to have to use it so soon...
Also include the whole MacPorts installation script in the cache key, so
that changes to the script cause a fresh installation. This should make
it a bit easier to reason about the effect of changes on cached state in
github accounts using CI, when we make adjustments.
Back-patch to 15, like d01ce180.
Discussion: https://postgr.es/m/CA%2BhUKGLqJdv6RcwyZ_0H7khxtLTNJyuK%2BvDFzv3uwYbn8hKH6A%40mail.gmail.com
1. Previously we were using ghcr.io/cirruslabs/macos-XXX-base:latest
images, but Cirrus has started ignoring that and using a particular
image, currently ghcr.io/cirruslabs/macos-runner:sonoma, for github
accounts using free CI resources (as opposed to dedicated runner
machines, as cfbot uses). Let's just ask for that image anyway, to stay
in sync.
2. Instead of hard-coding a MacPorts installation URL, deduce it from
the running macOS version and the available releases. This removes the
need to keep the ci_macports_packages.sh in sync with .cirrus.task.yml,
and to advance the MacPorts version from time to time.
3. Change the cache key we use to cache the whole macports installation
across builds to include the OS major version, to trigger a fresh
installation when appropriate.
Back-patch to 15 where CI began.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKGLqJdv6RcwyZ_0H7khxtLTNJyuK%2BvDFzv3uwYbn8hKH6A%40mail.gmail.com
Presently, pg_upgrade obtains the number of subscriptions in the
to-be-upgraded cluster by first querying pg_subscription in every
database for the number of subscriptions in only that database.
Then, in count_old_cluster_subscriptions(), it adds all the values
collected in the first step. This is expensive, especially when
there are many databases.
Fortunately, there is a better way to retrieve the subscription
count. Since pg_subscription is a shared catalog, we only need to
connect to a single database and query it once. This commit
modifies pg_upgrade to use that approach, which also allows us to
trim several lines of code. In passing, move the call to
get_db_subscription_count(), which has been renamed to
get_subscription_count(), from get_db_rel_and_slot_infos() to the
dedicated >= v17 section in check_and_dump_old_cluster().
We may be able to make similar improvements to
get_old_cluster_logical_slot_infos(), but that is left as a future
exercise.
Reviewed-by: Michael Paquier, Amit Kapila
Discussion: https://postgr.es/m/ZprQJv_TxccN3tkr%40nathan
Backpatch-through: 17
We don't allow inheritance parents as partitions, and have checks to
prevent this; but if a table _was_ in the past an inheritance parents
and all their children are removed, the pg_class.relhassubclass flag
may remain set, which confuses the partition pruning code (most
obviously, it results in an assertion failure; in production builds it
may be worse.)
Fix by resetting relhassubclass on attach.
Backpatch to all supported versions.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/18550-d5e047e9a897a889@postgresql.org
When provided an empty initial array, array_set_slice() fails to
check for overflow when computing the new array's dimensions.
While such overflows are ordinarily caught by ArrayGetNItems(),
commands with the following form are accepted:
INSERT INTO t (i[-2147483648:2147483647]) VALUES ('{}');
To fix, perform the hazardous computations using overflow-detecting
arithmetic routines. As with commit 18b585155a, the added test
cases generate errors that include a platform-dependent value, so
we again use psql's VERBOSITY parameter to suppress printing the
message text.
Reported-by: Alexander Lakhin
Author: Joseph Koshakow
Reviewed-by: Jian He
Discussion: https://postgr.es/m/31ad2cd1-db94-bdb3-f91a-65ffdb4bef95%40gmail.com
Backpatch-through: 12
clog.c, async.c and predicate.c included some SLRU page numbers still
handled as 4-byte integers, while int64 should be used for this purpose.
These holes have been introduced in 4ed8f0913b, that has introduced
the use of 8-byte integers for SLRU page numbers, still forgot about the
code paths updated by this commit.
Reported-by: Noah Misch
Author: Aleksander Alekseev, Michael Paquier
Discussion: https://postgr.es/m/20240626002747.dc.nmisch@google.com
Backpatch-through: 17
slru.h described incorrectly how SLRU segment names are formatted
depending on the segment number and if long or short segment names are
used. This commit closes the gap with a better description, fitting
with the reality.
Reported-by: Noah Misch
Author: Aleksander Alekseev
Discussion: https://postgr.es/m/20240626002747.dc.nmisch@google.com
Backpatch-through: 17
We were not being clear about which variants of the "direction"
clause are permitted in MOVE. Also, the text seemed to be
written with only the FETCH/MOVE NEXT case in mind, so it
didn't apply very well to other variants.
Also, document that "MOVE count IN cursor" only works if count
is a constant. This is not the whole truth, because some other
cases such as a parenthesized expression will also work, but
we want to push people to use "MOVE FORWARD count" instead.
The constant case is enough to cover what we allow in plain SQL,
and that seems sufficient to claim support for.
Update a comment in pl_gram.y claiming that we don't document
that point.
Per gripe from Philipp Salvisberg.
Discussion: https://postgr.es/m/172155553388.702.7932496598218792085@wrigleys.postgresql.org
This reverts commit 80c34692e8.
This test proved to be unstable on the buildfarm, timing out before the
standby could catch up on 32-bit machines where more rows were required
and failing to reliably trigger multiple index vacuum rounds on 64-bit
machines where fewer rows should be required.
Because the instability is only known to be present on versions of
Postgres with TIDStore used for dead TID storage by vacuum, this is only
being reverted on master and REL_17_STABLE.
As having this coverage may be valuable, there is a discussion on the
thread of possible ways to stabilize the test. If that happens, a fixed
test can be committed again.
Backpatch-through: 17
Reported-by: Tom Lane
Discussion: https://postgr.es/m/614152.1721580711%40sss.pgh.pa.us
After calling ConditionVariableSleep() or ConditionVariableTimedSleep()
one or more times, code is supposed to call ConditionVariableCancelSleep()
to remove itself from the waitlist. This code neglected to do so.
As far as I know, that had no observable consequences, but let's make
the code correct.
Discussion: http://postgr.es/m/CA+TgmoYW8eR+KN6zhVH0sin7QH6AvENqw_bkN-bB4yLYKAnsew@mail.gmail.com
If a view has some updatable and some non-updatable columns, we failed
to verify updatability of any columns for which an INSERT or UPDATE
on the view explicitly specifies a DEFAULT item (unless the view has
a declared default for that column, which is rare anyway, and one
would almost certainly not write one for a non-updatable column).
This would lead to an unexpected "attribute number N not found in
view targetlist" error rather than the intended error.
Per bug #18546 from Alexander Lakhin. This bug is old, so back-patch
to all supported branches.
Discussion: https://postgr.es/m/18546-84a292e759a9361d@postgresql.org
If vacuum fails to prune a tuple killed before OldestXmin, it will
decide to freeze its xmax and later error out in pre-freeze checks.
Add a test reproducing this scenario to the recovery suite which creates
a table on a primary, updates the table to generate dead tuples for
vacuum, and then, during the vacuum, uses a replica to force
GlobalVisState->maybe_needed on the primary to move backwards and
precede the value of OldestXmin set at the beginning of vacuuming the
table.
This commit is separate from the fix in case there are test stability
issues.
Author: Melanie Plageman
Reviewed-by: Peter Geoghegan
Discussion: https://postgr.es/m/CAAKRu_apNU2MPBK96V%2BbXjTq0RiZ-%3DA4ZTaysakpx9jxbq1dbQ%40mail.gmail.com
If vacuum fails to remove a tuple with xmax older than
VacuumCutoffs->OldestXmin and younger than GlobalVisState->maybe_needed,
it may attempt to freeze the tuple's xmax and then ERROR out in
pre-freeze checks with "cannot freeze committed xmax".
Fix this by having vacuum always remove tuples older than OldestXmin.
It is possible for GlobalVisState->maybe_needed to precede OldestXmin if
maybe_needed is forced to go backward while vacuum is running. This can
happen if a disconnected standby with a running transaction older than
VacuumCutoffs->OldestXmin reconnects to the primary after vacuum
initially calculates GlobalVisState and OldestXmin.
In back branches starting with 14, the first version using
GlobalVisState, failing to remove tuples older than OldestXmin during
pruning caused vacuum to infinitely loop in lazy_scan_prune(), as
investigated on this [1] thread. After 1ccc1e05ae removed the retry loop
in lazy_scan_prune() and stopped comparing tuples to OldestXmin, the
hang could no longer happen, but we could still attempt to freeze dead
tuples with xmax older than OldestXmin -- resulting in an ERROR.
Fix this by always removing dead tuples with xmax older than
VacuumCutoffs->OldestXmin. This is okay because the standby won't replay
the tuple removal until the tuple is removable. Thus, the worst that can
happen is a recovery conflict.
[1] https://postgr.es/m/20240415173913.4zyyrwaftujxthf2%40awork3.anarazel.de#1b216b7768b5bd577a3d3d51bd5aadee
Back-patch through 14
Author: Melanie Plageman
Reviewed-by: Peter Geoghegan, Robert Haas, Andres Freund, Heikki Linnakangas, and Noah Misch
Discussion: https://postgr.es/m/CAAKRu_bDD7oq9ZwB2OJqub5BovMG6UjEYsoK2LVttadjEqyRGg%40mail.gmail.com
For utility statements defined within a function, the query tree is
copied to a PlannedStmt as utility commands do not require planning.
However, the query ID was missing from the information passed down.
This leads to plugins relying on the query ID like pg_stat_statements to
not be able to track utility statements within function calls. Tests
are added to check this behavior, depending on pg_stat_statements.track.
This is an old bug. Now, query IDs for utilities are compiled using
their parsed trees rather than the query string since v16
(3db72ebcbe), leading to less bloat with utilities, so backpatch down
only to this version.
Author: Anthonin Bonnefoy
Discussion: https://postgr.es/m/CAO6_XqrGp-uwBqi3vBPLuRULKkddjC7R5QZCgsFren=8E+m2Sg@mail.gmail.com
Backpatch-through: 16
To do this, we must include the wal_level in the first WAL record
covered by each summary file; so add wal_level to struct Checkpoint
and the payload of XLOG_CHECKPOINT_REDO and XLOG_END_OF_RECOVERY.
This, in turn, requires bumping XLOG_PAGE_MAGIC and, since the
Checkpoint is also stored in the control file, also
PG_CONTROL_VERSION. It's not great to do that so late in the release
cycle, but the alternative seems to ship v17 without robust
protections against this scenario, which could result in corrupted
incremental backups.
A side effect of this patch is that, when a server with
wal_level=replica is started with summarize_wal=on for the first time,
summarization will no longer begin with the oldest WAL that still
exists in pg_wal, but rather from the first checkpoint after that.
This change should be harmless, because a WAL summary for a partial
checkpoint cycle can never make an incremental backup possible when
it would otherwise not have been.
Report by Fujii Masao. Patch by me. Review and/or testing by Jakub
Wartak and Fujii Masao.
Discussion: http://postgr.es/m/6e30082e-041b-4e31-9633-95a66de76f5d@oss.nttdata.com
Commit f4b54e1ed9, which introduced macros for protocol characters,
missed updating a few places. It also did not introduce macros for
messages sent from parallel workers to their leader processes.
This commit adds a new section in protocol.h for those.
Author: Aleksander Alekseev
Discussion: https://postgr.es/m/CAJ7c6TNTd09AZq8tGaHS3LDyH_CCnpv0oOz2wN1dGe8zekxrdQ%40mail.gmail.com
Backpatch-through: 17
This essentially reverts c2d93c3802 except tests. The problem with
c2d93c3802 was that it only changed the casting behavior for types
with typmod, and had coding issues noted in the post-commit review.
This commit changes coerceJsonFuncExpr() to use assignment-level casts
instead of explicit casts to coerce the result of JSON constructor
functions to the specified or the default RETURNING type. Using
assignment-level casts fixes the problem that using explicit casts was
leading to the wrong typmod / length coercion behavior -- truncating
results longer than the specified length instead of erroring out --
which c2d93c3802 aimed to solve.
That restricts the set of allowed target types to string types, the
same set that's currently allowed.
Discussion: https://postgr.es/m/202406291824.reofujy7xdj3@alvherre.pgsql
Previously, CREATE MATERIALIZED VIEW ... WITH DATA populated the MV
the same way as CREATE TABLE ... AS.
Instead, reuse the REFRESH logic, which locks down security-restricted
operations and restricts the search_path. This reduces the chance that
a subsequent refresh will fail.
Reported-by: Noah Misch
Backpatch-through: 17
Discussion: https://postgr.es/m/20240630222344.db.nmisch@google.com
Before this change guc_var_compare() cast the input arguments to
const struct config_generic *. That's not quite right however, as the input
on one side is often just a char * on one side.
Instead just use char *, the first field in config_generic.
This fixes a -Warray-bounds warning with some versions of gcc. While the
warning is only known to be triggered for <= 15, the issue the warning points
out seems real, so apply the fix everywhere.
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reported-by: Erik Rijkers <er@xs4all.nl>
Suggested-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/a74a1a0d-0fd2-3649-5224-4f754e8f91aa%40xs4all.nl
The tests added by commit c086896625 were unstable due to
missing schema names when checking pg_tables and pg_indexes.
Backpatch to v17.
Reported by buildfarm.
As commit ca4103025d stated, new partitions without a specified tablespace
should inherit the parent relation's tablespace. However, previously,
ALTER TABLE MERGE PARTITIONS and ALTER TABLE SPLIT PARTITION commands
always created new partitions in the default tablespace, ignoring
the parent's tablespace. This commit ensures new partitions inherit
the parent's tablespace.
Backpatch to v17 where these commands were introduced.
Author: Fujii Masao
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/abaf390b-3320-40a5-8815-ef476db5cfe7@oss.nttdata.com
checkWellFormedRecursion would issue "missing recursive reference"
if a WITH RECURSIVE query contained a single self-reference but
that self-reference was inside a top-level WITH, ORDER BY, LIMIT,
etc, rather than inside the second arm of the UNION as expected.
We already intended to throw more-on-point errors for such cases,
but those error checks must be done before examining the UNION arm
in order to have the desired results. So this patch need only
move some code (and improve the comments).
Per bug #18536 from Alexander Lakhin. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/18536-0a342ec07901203e@postgresql.org
Such queries don't expand automatically updatable views, and ModifyTable
uses the wholerow attribute unconditionally. The user-visible behavior
is fine, so change to more-specific assertions. Commit
d5f788b41d added the wrong assertion.
Back-patch to v17, where commit 5f2e179bd3
introduced MERGE view_name.
Reported by Alexander Lakhin.
Discussion: https://postgr.es/m/e4b40a88-c134-6926-3196-bc4501cb87a2@gmail.com
ANALYZE sets relhassubclass=f when a partitioned table no longer has
partitions. An ANALYZE doing that proceeded to apply the inplace update
of pg_class.reltuples to the old pg_class tuple instead of the new
tuple, losing that reltuples=0 change if the ANALYZE committed.
Non-partitioning inheritance trees were unaffected. Back-patch to v14,
where commit 375aed36ad introduced
maintenance of partitioned table pg_class.reltuples.
Reported by Alexander Lakhin.
Discussion: https://postgr.es/m/a295b499-dcab-6a99-c06e-01cf60593344@gmail.com
