This is slightly tedious because the adjustments cascade through
a couple of levels of subroutines, but it's not very hard.
I chose to avoid changing function signatures more than absolutely
necessary, by passing the escontext pointer in existing structs
where possible.
tsquery's nuisance NOTICEs about empty queries are suppressed in
soft-error mode, since they're not errors and we surely don't want
them to be shown to the user anyway. Maybe that whole behavior
should be reconsidered.
Discussion: https://postgr.es/m/3824377.1672076822@sss.pgh.pa.us
ts_locale.c omitted support for "isalnum" tests, perhaps on the
grounds that there were initially no use-cases for that. However,
both ltree and pg_trgm need such tests, and we do also have one
use-case now in the core backend. The workaround of testing
isalpha and isdigit separately seems quite inefficient, especially
when dealing with multibyte characters; so let's fill in the
missing support.
Discussion: https://postgr.es/m/2548310.1664999615@sss.pgh.pa.us
The standard way to check for list emptiness is to compare the
List pointer to NIL; our list code goes out of its way to ensure
that that is the only representation of an empty list. (An
acceptable alternative is a plain boolean test for non-null
pointer, but explicit mention of NIL is usually preferable.)
Various places didn't get that memo and expressed the condition
with list_length(), which might not be so bad except that there
were such a variety of ways to check it exactly: equal to zero,
less than or equal to zero, less than one, yadda yadda. In the
name of code readability, let's standardize all those spellings
as "list == NIL" or "list != NIL". (There's probably some
microscopic efficiency gain too, though few of these look to be
at all performance-critical.)
A very small number of cases were left as-is because they seemed
more consistent with other adjacent list_length tests that way.
Peter Smith, with bikeshedding from a number of us
Discussion: https://postgr.es/m/CAHut+PtQYe+ENX5KrONMfugf0q6NHg4hR5dAhqEXEc2eefFeig@mail.gmail.com
The distance in phrase operator must be an integer value between zero
and MAXENTRYPOS inclusive. But previously the error message about
its valid value included the information about its upper limit
but not lower limit (i.e., zero). This commit improves the error message
so that it also includes the information about its lower limit.
Back-patch to v9.6 where full-text phrase search was supported.
Author: Kyotaro Horiguchi
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20210819.170315.1413060634876301811.horikyota.ntt@gmail.com
websearch_to_tsquery() splits text in quotes into tokens and connects them with
phrase operator on its own. However, that leads to surprising results when the
token contains no words.
For instance, websearch_to_tsquery('"aaa: bbb"') is 'aaa <2> bbb', because
it is equivalent of to_tsquery(E'aaa <-> \':\' <-> bbb'). But
websearch_to_tsquery('"aaa: bbb"') has to be 'aaa <-> bbb' in order to match
to_tsvector('aaa: bbb').
Since 0c4f355c6a, we anyway connect lexemes of complex tokens with phrase
operators. Thus, let's just websearch_to_tsquery() parse text in quotes as
a single token. Therefore, websearch_to_tsquery() should process the quoted
text in the same way phraseto_tsquery() does. This solution is what we exactly
need and also simplifies the code.
This commit is an incompatible change, so we don't backpatch it.
Reported-by: Valentin Gatien-Baron
Discussion: https://postgr.es/m/CA%2B0DEqiZs7gdOd4ikmg%3D0UWG%2BSwWOLxPsk_JW-sx9WNOyrb0KQ%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Tom Lane, Zhihong Yu
Similar to commits 7e735035f2 and dddf4cdc33, this commit makes the order
of header file inclusion consistent for backend modules.
In the passing, removed a couple of duplicate inclusions.
Author: Vignesh C
Reviewed-by: Kuntal Ghosh and Amit Kapila
Discussion: https://postgr.es/m/CALDaNm2Sznv8RR6Ex-iJO6xAdsxgWhCoETkaYX=+9DW3q0QCfA@mail.gmail.com
Error-tolerant conversion function with web-like syntax for search query,
it simplifies constraining search engine with close to habitual interface for
users.
Bump catalog version
Authors: Victor Drobny, Dmitry Ivanov with editorization by me
Reviewed by: Aleksander Alekseev, Tomas Vondra, Thomas Munro, Aleksandr Parfenov
Discussion: https://www.postgresql.org/message-id/flat/fe931111ff7e9ad79196486ada79e268@postgrespro.ru
Fix its header comment, which described the old behavior of the <N>
phrase distance operator; we missed updating that in commit 028350f61.
Also, reset errno before strtol() call, to defend against the possibility
that it was already ERANGE at entry. (The lack of complaints says that
it generally isn't, but this is at least a latent bug.) Very minor
stylistic improvements as well.
Victor Drobny noted the obsolete comment, I noted the errno issue.
Back-patch to 9.6 where this code was added, just in case the errno
issue is a live bug in some cases.
Discussion: https://postgr.es/m/2b5382fdff9b1f79d5eb2c99c4d2cbe2@postgrespro.ru
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4dd0dad0dd9eea4be9cc1412373a8c89 wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
In an attempt to simplify the tsquery matching engine, the original
phrase search patch invented rewrite rules that would rearrange a
tsquery so that no AND/OR/NOT operator appeared below a PHRASE operator.
But this approach had numerous problems. The rearrangement step was
missed by ts_rewrite (and perhaps other places), allowing tsqueries
to be created that would cause Assert failures or perhaps crashes at
execution, as reported by Andreas Seltenreich. The rewrite rules
effectively defined semantics for operators underneath PHRASE that were
buggy, or at least unintuitive. And because rewriting was done in
tsqueryin() rather than at execution, the rearrangement was user-visible,
which is not very desirable --- for example, it might cause unexpected
matches or failures to match in ts_rewrite.
As a somewhat independent problem, the behavior of nested PHRASE operators
was only sane for left-deep trees; queries like "x <-> (y <-> z)" did not
behave intuitively at all.
To fix, get rid of the rewrite logic altogether, and instead teach the
tsquery execution engine to manage AND/OR/NOT below a PHRASE operator
by explicitly computing the match location(s) and match widths for these
operators.
This requires introducing some additional fields into the publicly visible
ExecPhraseData struct; but since there's no way for third-party code to
pass such a struct to TS_phrase_execute, it shouldn't create an ABI problem
as long as we don't move the offsets of the existing fields.
Another related problem was that index searches supposed that "!x <-> y"
could be lossily approximated as "!x & y", which isn't correct because
the latter will reject, say, "x q y" which the query itself accepts.
This required some tweaking in TS_execute_ternary along with the main
tsquery engine.
Back-patch to 9.6 where phrase operators were introduced. While this
could be argued to change behavior more than we'd like in a stable branch,
we have to do something about the crash hazards and index-vs-seqscan
inconsistency, and it doesn't seem desirable to let the unintuitive
behaviors induced by the rewriting implementation stand as precedent.
Discussion: https://postgr.es/m/28215.1481999808@sss.pgh.pa.us
Discussion: https://postgr.es/m/26706.1482087250@sss.pgh.pa.us
Digging around bug #14245 I found that commit
6734a1cacd44f5b731933cbc93182b135b167d0c missed that NOT operation is
right associative in opposite to all other. This miss is resposible for
tsquery parser fail on sequence of NOT operations
<-> operator now have higher predecence than & (AND) operator. This change
was motivated by unexpected difference of similar queries:
'a & b <-> c'::tsquery and 'b <-> c & a'. Before first query means
(a & b) <-> c and second one - '(b <-> c) & a', now phrase operator evaluates
first.
Per suggestion from Tom Lane 32260.1465402409@sss.pgh.pa.us
As noticed by Tom Lane changing operation's number in commit
bb140506df605fab58f48926ee1db1f80bdafb59 causes on-disk format incompatibility.
Revert to previous numbering, that is reason to add special array to store
priorities of operation. Also it reverts order of tsquery to previous.
Author: Dmitry Ivanov
Patch introduces new text search operator (<-> or <DISTANCE>) into tsquery.
On-disk and binary in/out format of tsquery are backward compatible.
It has two side effect:
- change order for tsquery, so, users, who has a btree index over tsquery,
should reindex it
- less number of parenthesis in tsquery output, and tsquery becomes more
readable
Authors: Teodor Sigaev, Oleg Bartunov, Dmitry Ivanov
Reviewers: Alexander Korotkov, Artur Zakirov
Now that we use CRC-32C in WAL and the control file, the "traditional" and
"legacy" CRC-32 variants are not used in any frontend programs anymore.
Move the code for those back from src/common to src/backend/utils/hash.
Also move the slicing-by-8 implementation (back) to src/port. This is in
preparation for next patch that will add another implementation that uses
Intel SSE 4.2 instructions to calculate CRC-32C, where available.
To get CRC functionality in a client program, you now need to link with
libpgcommon instead of libpgport. The CRC code has nothing to do with
portability, so libpgcommon is a better home. (libpgcommon didn't exist
when pg_crc.c was originally moved to src/port.)
Remove the possibility to get CRC functionality by just #including
pg_crc_tables.h. I'm not aware of any extensions that actually did that and
couldn't simply link with libpgcommon.
This also moves the pg_crc.h header file from src/include/utils to
src/include/common, which will require changes to any external programs
that currently does #include "utils/pg_crc.h". That seems acceptable, as
include/common is clearly the right home for it now, and the change needed
to any such programs is trivial.
The old algorithm was found to not be the usual CRC-32 algorithm, used by
Ethernet et al. We were using a non-reflected lookup table with code meant
for a reflected lookup table. That's a strange combination that AFAICS does
not correspond to any bit-wise CRC calculation, which makes it difficult to
reason about its properties. Although it has worked well in practice, seems
safer to use a well-known algorithm.
Since we're changing the algorithm anyway, we might as well choose a
different polynomial. The Castagnoli polynomial has better error-correcting
properties than the traditional CRC-32 polynomial, even if we had
implemented it correctly. Another reason for picking that is that some new
CPUs have hardware support for calculating CRC-32C, but not CRC-32, let
alone our strange variant of it. This patch doesn't add any support for such
hardware, but a future patch could now do that.
The old algorithm is kept around for tsquery and pg_trgm, which use the
values in indexes that need to remain compatible so that pg_upgrade works.
While we're at it, share the old lookup table for CRC-32 calculation
between hstore, ltree and core. They all use the same table, so might as
well.
Several functions, mostly type input functions, calculated an allocation
size such that the calculation wrapped to a small positive value when
arguments implied a sufficiently-large requirement. Writes past the end
of the inadvertent small allocation followed shortly thereafter.
Coverity identified the path_in() vulnerability; code inspection led to
the rest. In passing, add check_stack_depth() to prevent stack overflow
in related functions.
Back-patch to 8.4 (all supported versions). The non-comment hstore
changes touch code that did not exist in 8.4, so that part stops at 9.0.
Noah Misch and Heikki Linnakangas, reviewed by Tom Lane.
Security: CVE-2014-0064
The Solaris Studio compiler warns about these instances, unlike more
mainstream compilers such as gcc. But manual inspection showed that
the code is clearly not reachable, and we hope no worthy compiler will
complain about removing this code.
The latter was already the dominant use, and it's preferable because
in C the convention is that intXX means XX bits. Therefore, allowing
mixed use of int2, int4, int8, int16, int32 is obviously confusing.
Remove the typedefs for int2 and int4 for now. They don't seem to be
widely used outside of the PostgreSQL source tree, and the few uses
can probably be cleaned up by the time this ships.
After parsing a parenthesized subexpression, we must pop all pending
ANDs and NOTs off the stack, just like the case for a simple operand.
Per bug #5793.
Also fix clones of this routine in contrib/intarray and contrib/ltree,
where input of types query_int and ltxtquery had the same problem.
Back-patch to all supported versions.
This alters various incidental uses of C++ key words to use other similar
identifiers, so that a C++ compiler won't choke outright. You still
(probably) need extern "C" { }; around the inclusion of backend headers.
based on a patch by Kurt Harriman <harriman@acm.org>
Also add a script cpluspluscheck to check for C++ compatibility in the
future. As of right now, this passes without error for me.
