Since this function is used as a CHECK constraint condition,
returning NULL is tantamount to returning TRUE, which would have the
effect of letting in a row that doesn't satisfy the hash condition.
Admittedly, the cases for which this is done should be unreachable
in practice, but that doesn't make it any less a bad idea. It also
seems like a dartboard was used to decide which error cases should
throw errors as opposed to returning NULL.
For the checks for NULL input values, I just switched it to returning
false. There's some argument that an error would be better; but the
case really should be can't-happen in a generated hash constraint,
so it's likely not worth more code for.
For the parent-relation-open-failure case, it seems like we might
as well let relation_open throw an error, instead of having an
impossible-to-diagnose constraint failure.
Back-patch to v11 where this code came in.
Discussion: https://postgr.es/m/24067.1605134819@sss.pgh.pa.us
Move the system catalog index declarations from catalog/indexing.h to
the respective parent tables' catalog/pg_*.h files. The original
reason for having it split was that the old genbki system produced the
output in the order of the catalog files it read, so all the indexing
stuff needed to come separately. But this is no longer the case, and
keeping it together makes more sense.
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/c7cc82d6-f976-75d6-2e3e-b03d2cab26bb@2ndquadrant.com
Previously we only tagged on the required information to allow the
executor to perform run-time partition pruning for Append/MergeAppend
nodes belonging to base relations. It was thought that nested
Append/MergeAppend nodes were just about always pulled up into the
top-level Append/MergeAppend and that making the run-time pruning info for
any sub Append/MergeAppend nodes was a waste of time. However, that was
likely badly thought through.
Some examples of cases we're unable to pullup nested Append/MergeAppends
are: 1) Parallel Append nodes with a mix of parallel and non-parallel
paths into a Parallel Append. 2) When planning an ordered Append scan a
sub-partition which is unordered may require a nested MergeAppend path to
ensure sub-partitions don't mix up the order of tuples being fed into the
top-level Append.
Unfortunately, it was not just as simple as removing the lines in
createplan.c which were purposefully not building the run-time pruning
info for anything but RELOPT_BASEREL relations. The code in
add_paths_to_append_rel() was far too sloppy about which partitioned_rels
it included for the Append/MergeAppend paths. The original code there
would always assume accumulate_append_subpath() would pull each sub-Append
and sub-MergeAppend path into the top-level path. While it does not
appear that there were any actual bugs caused by having the additional
partitioned table RT indexes recorded, what it did mean is that later in
planning, when we built the run-time pruning info that we wasted effort
and built PartitionedRelPruneInfos for partitioned tables that we had no
subpaths for the executor to run-time prune.
Here we tighten that up so that partitioned_rels only ever contains the RT
index for partitioned tables which actually have subpaths in the given
Append/MergeAppend. We can now Assert that every PartitionedRelPruneInfo
has a non-empty present_parts. That should allow us to catch any weird
corner cases that have been missed.
In passing, it seems there is no longer a good reason to have the
AppendPath and MergeAppendPath's partitioned_rel fields a List of IntList.
We can simply have a List of Relids instead. This is more compact in
memory and faster to add new members to. We still know which is the root
level partition as these always have a lower relid than their children.
Previously this field was used for more things, but run-time partition
pruning now remains the only user of it and it has no need for a List of
IntLists.
Here we also get rid of the RelOptInfo partitioned_child_rels field. This
is what was previously used to (sometimes incorrectly) set the
Append/MergeAppend path's partitioned_rels field. That was the only usage
of that field, so we can happily just remove it.
I also couldn't resist changing some nearby code to make use of the newly
added for_each_from macro so we can skip the first element in the list
without checking if the current item was the first one on each
iteration.
A bug report from Andreas Kretschmer prompted all this work, however,
after some consideration, I'm not personally classing this as a bug fix.
So no backpatch. In Andreas' test case, it just wasn't that clear that
there was a nested Append since the top-level Append just had a single
sub-path which was pulled up a level, per 8edd0e794.
Author: David Rowley
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/flat/CAApHDvqSchs%2BubdybcfFaSPB%2B%2BEA7kqMaoqajtP0GtZvzOOR3g%40mail.gmail.com
We failed to pass down the query string to check_new_partition_bound,
so that its attempts to provide error cursor positions were for naught;
one must have the query string to get parser_errposition to do anything.
Adjust its API to require a ParseState to be passed down.
Also, improve the logic inside check_new_partition_bound so that the
cursor points at the partition bound for the specific column causing
the issue, when one can be identified.
That part is also for naught if we can't determine the query position of
the column with the problem. Improve transformPartitionBoundValue so
that it makes sure that const-simplified partition expressions will be
properly labeled with positions. In passing, skip calling evaluate_expr
if the value is already a Const, which is surely the most common case.
Alexandra Wang, Ashwin Agrawal, Amit Langote; reviewed by Ashutosh Bapat
Discussion: https://postgr.es/m/CACiyaSopZoqssfMzgHk6fAkp01cL6vnqBdmTw2C5_KJaFR_aMg@mail.gmail.com
Discussion: https://postgr.es/m/CAJV4CdrZ5mKuaEsRSbLf2URQ3h6iMtKD=hik8MaF5WwdmC9uZw@mail.gmail.com
Commit 13838740f fixed some issues with step generation in partition
pruning, but there was yet another one: get_steps_using_prefix() assumes
that clauses in the passed-in prefix list are sorted in ascending order
of their partition key numbers, but the caller failed to ensure this for
range partitioning, which led to an assertion failure in debug builds.
Adjust the caller function to arrange the clauses in the prefix list in
the required order for range partitioning.
Back-patch to v11, like the previous commit.
Patch by me, reviewed by Amit Langote.
Discussion: https://postgr.es/m/CAPmGK16jkXiFG0YqMbU66wte-oJTfW6D1HaNvQf%3D%2B5o9%3Dm55wQ%40mail.gmail.com
In the case of range partitioning, get_steps_using_prefix() assumes that
the passed-in prefix list contains at least one clause for each of the
partition keys earlier than one specified in the passed-in
step_lastkeyno, but the caller (ie, gen_prune_steps_from_opexps())
didn't take it into account, which led to a server crash or incorrect
results when the list contained no clauses for such partition keys, as
reported in bug #16500 and #16501 from Kobayashi Hisanori. Update the
caller to call that function only when the list created there contains
at least one clause for each of the earlier partition keys in the case
of range partitioning.
While at it, fix some other issues:
* The list to pass to get_steps_using_prefix() is allowed to contain
multiple clauses for the same partition key, as described in the
comment for that function, but that function actually assumed that the
list contained just a single clause for each of middle partition keys,
which led to an assertion failure when the list contained multiple
clauses for such partition keys. Update that function to match the
comment.
* In the case of hash partitioning, partition keys are allowed to be
NULL, in which case the list to pass to get_steps_using_prefix()
contains no clauses for NULL partition keys, but that function treats
that case as like the case of range partitioning, which led to the
assertion failure. Update the assertion test to take into account
NULL partition keys in the case of hash partitioning.
* Fix a typo in a comment in get_steps_using_prefix_recurse().
* gen_partprune_steps() failed to detect self-contradiction from
strict-qual clauses and an IS NULL clause for the same partition key
in some cases, producing incorrect partition-pruning steps, which led
to incorrect results of partition pruning, but didn't cause any
user-visible problems fortunately, as the self-contradiction is
detected later in the query planning. Update that function to detect
the self-contradiction.
Per bug #16500 and #16501 from Kobayashi Hisanori. Patch by me, initial
diagnosis for the reported issue and review by Dmitry Dolgov.
Back-patch to v11, where partition pruning was introduced.
Discussion: https://postgr.es/m/16500-d1613f2a78e1e090%40postgresql.org
Discussion: https://postgr.es/m/16501-5234a9a0394f6754%40postgresql.org
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
The additional pain from level 4 is excessive for the gain.
Also revert all the source annotation changes to their original
wordings, to avoid back-patching pain.
Discussion: https://postgr.es/m/31166.1589378554@sss.pgh.pa.us
Previously, the partitionwise join technique only allowed partitionwise
join when input partitioned tables had exactly the same partition
bounds. This commit extends the technique to some cases when the tables
have different partition bounds, by using an advanced partition-matching
algorithm introduced by this commit. For both the input partitioned
tables, the algorithm checks whether every partition of one input
partitioned table only matches one partition of the other input
partitioned table at most, and vice versa. In such a case the join
between the tables can be broken down into joins between the matching
partitions, so the algorithm produces the pairs of the matching
partitions, plus the partition bounds for the join relation, to allow
partitionwise join for computing the join. Currently, the algorithm
works for list-partitioned and range-partitioned tables, but not
hash-partitioned tables. See comments in partition_bounds_merge().
Ashutosh Bapat and Etsuro Fujita, most of regression tests by Rajkumar
Raghuwanshi, some of the tests by Mark Dilger and Amul Sul, reviewed by
Dmitry Dolgov and Amul Sul, with additional review at various points by
Ashutosh Bapat, Mark Dilger, Robert Haas, Antonin Houska, Amit Langote,
Justin Pryzby, and Tomas Vondra
Discussion: https://postgr.es/m/CAFjFpRdjQvaUEV5DJX3TW6pU5eq54NCkadtxHX2JiJG_GvbrCA@mail.gmail.com
All errors of SQLSTATE class 23 should include the name of an object
associated with the error in separate fields of the error report message.
We do this so that applications need not try to extract them from the
possibly-localized human-readable text of the message.
Reported-by: Chris Bandy
Author: Chris Bandy
Reviewed-by: Amit Kapila and Amit Langote
Discussion: https://postgr.es/m/0aa113a3-3c7f-db48-bcd8-f9290b2269ae@gmail.com
This also involves renaming src/include/utils/hashutils.h, which
becomes src/include/common/hashfn.h. Perhaps an argument can be
made for keeping the hashutils.h name, but it seemed more
consistent to make it match the name of the file, and also more
descriptive of what is actually going on here.
Patch by me, reviewed by Suraj Kharage and Mark Dilger. Off-list
advice on how not to break the Windows build from Davinder Singh
and Amit Kapila.
Discussion: http://postgr.es/m/CA+TgmoaRiG4TXND8QuM6JXFRkM_1wL2ZNhzaUKsuec9-4yrkgw@mail.gmail.com
Previously, partition_bounds_copy() checked whether the strategy for the
given partition bounds was hash or not, and then determined the number of
elements in the datums in the datums array for the partition bounds, on
each iteration of the loop for copying the datums array, but there is no
need to do that. Perform the checks only once before the loop iteration.
Author: Etsuro Fujita
Reported-by: Amit Langote and Julien Rouhaud
Discussion: https://postgr.es/m/CAPmGK14Rvxrm8DHWvCjdoks6nwZuHBPvMnWZ6rkEx2KhFeEoPQ@mail.gmail.com
This follows multiple complains from Peter Geoghegan, Andres Freund and
Alvaro Herrera that this issue ought to be dug more before actually
happening, if it happens.
Discussion: https://postgr.es/m/20191226144606.GA5659@alvherre.pgsql
In the wake of commit 5b9312378, there's no particular reason
for this restriction (previously, it was problematic because of
the implied rowtype reference). A simple constraint on a whole-row
Var probably isn't that useful, but conceivably somebody would want
to pass one to a function that extracts a partitioning key. Besides
which, we're expending much more code to enforce the restriction than
we save by having it, since the latter quantity is now zero.
So drop the restriction.
Amit Langote
Discussion: https://postgr.es/m/CA+HiwqFUzjfj9HEsJtYWcr1SgQ_=iCAvQ=O2Sx6aQxoDu4OiHw@mail.gmail.com
Formerly the rd_partkey and rd_partdesc data structures were always
populated immediately when a relcache entry was built or rebuilt.
This patch changes things so that they are populated only when they
are first requested. (Hence, callers *must* now always use
RelationGetPartitionKey or RelationGetPartitionDesc; just fetching
the pointer directly is no longer acceptable.)
This seems to have some performance benefits, but the main reason to do
it is that it eliminates a recursive-reload failure that occurs if the
partkey or partdesc expressions contain any references to the relation's
rowtype (as discovered by Amit Langote). In retrospect, since loading
these data structures might result in execution of nearly-arbitrary code
via eval_const_expressions, it was a dumb idea to require that to happen
during relcache entry rebuild.
Also, fix things so that old copies of a relcache partition descriptor
will be dropped when the cache entry's refcount goes to zero. In the
previous coding it was possible for such copies to survive for the
lifetime of the session, as I'd complained of in a previous discussion.
(This management technique still isn't perfect, but it's better than
before.) Improve the commentary explaining how that works and why
it's safe to hand out direct pointers to these relcache substructures.
In passing, improve RelationBuildPartitionDesc by using the same
memory-context-parent-swap approach used by RelationBuildPartitionKey,
thereby making it less dependent on strong assumptions about what
partition_bounds_copy does. Avoid doing get_rel_relkind in the
critical section, too.
Patch by Amit Langote and Tom Lane; Robert Haas deserves some credit
for prior work in the area, too. Although this is a pre-existing
problem, no back-patch: the patch seems too invasive to be safe to
back-patch, and the bug it fixes is a corner case that seems
relatively unlikely to cause problems in the field.
Discussion: https://postgr.es/m/CA+HiwqFUzjfj9HEsJtYWcr1SgQ_=iCAvQ=O2Sx6aQxoDu4OiHw@mail.gmail.com
Discussion: https://postgr.es/m/CA+TgmoY3bRmGB6-DUnoVy5fJoreiBJ43rwMrQRCdPXuKt4Ykaw@mail.gmail.com
The following renaming is done so as source files related to index
access methods are more consistent with table access methods (the
original names used for index AMs ware too generic, and could be
confused as including features related to table AMs):
- amapi.h -> indexam.h.
- amapi.c -> indexamapi.c. Here we have an equivalent with
backend/access/table/tableamapi.c.
- amvalidate.c -> indexamvalidate.c.
- amvalidate.h -> indexamvalidate.h.
- genam.c -> indexgenam.c.
- genam.h -> indexgenam.h.
This has been discussed during the development of v12 when table AM was
worked on, but the renaming never happened.
Author: Michael Paquier
Reviewed-by: Fabien Coelho, Julien Rouhaud
Discussion: https://postgr.es/m/20191223053434.GF34339@paquier.xyz
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
Commit 6f6b99d13 stuck an INFO message into the fast path for
checking partition constraints, for no very good reason except
that it made it easy for the regression tests to verify that
that path was taken. Assorted later patches did likewise,
increasing the unsuppressable-chatter level from ALTER TABLE
even more. This isn't good for the user experience, so let's
drop these messages down to DEBUG1 where they belong. So as
not to have a loss of test coverage, create a TAP test that
runs the relevant queries with client_min_messages = DEBUG1
and greps for the expected messages.
This testing method is a bit brute-force --- in particular,
it duplicates the execution of a fair amount of the core
create_table and alter_table tests. We experimented with
other solutions, but running any significant amount of
standard testing with client_min_messages = DEBUG1 seems
to have a lot of output-stability pitfalls, cf commits
bbb96c370 and 5655565c0. Possibly at some point we'll look
into whether we can reduce the amount of test duplication.
Backpatch into v12, because some of these messages are new
in v12 and we don't really want to ship it that way.
Sergei Kornilov
Discussion: https://postgr.es/m/81911511895540@web58j.yandex.ru
Discussion: https://postgr.es/m/4859321552643736@myt5-02b80404fd9e.qloud-c.yandex.net
For most uses of acl.h the details of how "Acl" internally looks like
are irrelevant. It might make sense to move a lot of the
implementation details into a separate header at a later point.
The main motivation of this change is to avoid including fmgr.h (via
array.h, which needs it for exposed structs) in a lot of files that
otherwise don't need it. A subsequent commit will remove the fmgr.h
include from a lot of files.
Directly include utils/array.h and utils/expandeddatum.h from the
files that need them, but previously included them indirectly, via
acl.h.
Author: Andres Freund
Discussion: https://postgr.es/m/20190803193733.g3l3x3o42uv4qj7l@alap3.anarazel.de
We only need to invoke constraint exclusion on partitioned tables when
they are a partition, and they themselves contain a default partition;
it's not necessary otherwise, and it's expensive, so avoid it. Also, we
were trying once for each clause separately, but we can do it for all
the clauses at once.
While at it, centralize setting of RelOptInfo->partition_qual instead of
computing it in slightly different ways in different places.
Per complaints from Simon Riggs about 4e85642d935e; reviewed by Yuzuko
Hosoya, Kyotaro Horiguchi.
Author: Amit Langote. I (Álvaro) again mangled the patch somewhat.
Discussion: https://postgr.es/m/CANP8+j+tMCY=nEcQeqQam85=uopLBtX-2vHiLD2bbp7iQQUKpA@mail.gmail.com
In the wake of commit 1cff1b95a, the result of list_concat no longer
shares the ListCells of the second input. Therefore, we can replace
"list_concat(x, list_copy(y))" with just "list_concat(x, y)".
To improve call sites that were list_copy'ing the first argument,
or both arguments, invent "list_concat_copy()" which produces a new
list sharing no ListCells with either input. (This is a bit faster
than "list_concat(list_copy(x), y)" because it makes the result list
the right size to start with.)
In call sites that were not list_copy'ing the second argument, the new
semantics mean that we are usually leaking the second List's storage,
since typically there is no remaining pointer to it. We considered
inventing another list_copy variant that would list_free the second
input, but concluded that for most call sites it isn't worth worrying
about, given the relative compactness of the new List representation.
(Note that in cases where such leakage would happen, the old code
already leaked the second List's header; so we're only discussing
the size of the leak not whether there is one. I did adjust two or
three places that had been troubling to free that header so that
they manually free the whole second List.)
Patch by me; thanks to David Rowley for review.
Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us
We were applying constraint exclusion on the partition constraint when
generating pruning steps for a clause, but only for the rather
restricted situation of them being boolean OR operators; however it is
possible to have differently shaped clauses that also benefit from
constraint exclusion. This applies particularly to the default
partition since their constraints are in essence a long list of OR'ed
subclauses ... but it applies to other cases too. So in certain cases
we're scanning partitions that we don't need to.
Remove the specialized code in OR clauses, and add a generally
applicable test of the clause refuting the partition constraint; mark
the whole pruning operation as contradictory if it hits.
This has the unwanted side-effect of testing some (most? all?)
constraints more than once if constraint_exclusion=on. That seems
unavoidable as far as I can tell without some additional work, but
that's not the recommended setting for that parameter anyway.
However, because this imposes additional processing cost for all
queries using partitioned tables, I decided not to backpatch this
change.
Author: Amit Langote, Yuzuko Hosoya, Álvaro Herrera
Reviewers: Shawn Wang, Thibaut Madeleine, Yoshikazu Imai, Kyotaro
Horiguchi; they were also uncredited reviewers for commit 489247b0e6.
Discussion: https://postgr.es/m/9bb31dfe-b0d0-53f3-3ea6-e64b811424cf@lab.ntt.co.jp
When querying a partitioned table containing a default partition, we
were wrongly deciding to include it in the scan too early in the
process, failing to exclude it in some cases. If we reinterpret the
PruneStepResult.scan_default flag slightly, we can do a better job at
detecting that it can be excluded. The change is that we avoid setting
the flag for that pruning step unless the step absolutely requires the
default partition to be scanned (in contrast with the previous
arrangement, which was to set it unless the step was able to prune it).
So get_matching_partitions() must explicitly check the partition that
each returned bound value corresponds to in order to determine whether
the default one needs to be included, rather than relying on the flag
from the final step result.
Author: Yuzuko Hosoya <hosoya.yuzuko@lab.ntt.co.jp>
Reviewed-by: Amit Langote <Langote_Amit_f8@lab.ntt.co.jp>
Discussion: https://postgr.es/m/00e601d4ca86$932b8bc0$b982a340$@lab.ntt.co.jp
Originally, Postgres Lists were a more or less exact reimplementation of
Lisp lists, which consist of chains of separately-allocated cons cells,
each having a value and a next-cell link. We'd hacked that once before
(commit d0b4399d8) to add a separate List header, but the data was still
in cons cells. That makes some operations -- notably list_nth() -- O(N),
and it's bulky because of the next-cell pointers and per-cell palloc
overhead, and it's very cache-unfriendly if the cons cells end up
scattered around rather than being adjacent.
In this rewrite, we still have List headers, but the data is in a
resizable array of values, with no next-cell links. Now we need at
most two palloc's per List, and often only one, since we can allocate
some values in the same palloc call as the List header. (Of course,
extending an existing List may require repalloc's to enlarge the array.
But this involves just O(log N) allocations not O(N).)
Of course this is not without downsides. The key difficulty is that
addition or deletion of a list entry may now cause other entries to
move, which it did not before.
For example, that breaks foreach() and sister macros, which historically
used a pointer to the current cons-cell as loop state. We can repair
those macros transparently by making their actual loop state be an
integer list index; the exposed "ListCell *" pointer is no longer state
carried across loop iterations, but is just a derived value. (In
practice, modern compilers can optimize things back to having just one
loop state value, at least for simple cases with inline loop bodies.)
In principle, this is a semantics change for cases where the loop body
inserts or deletes list entries ahead of the current loop index; but
I found no such cases in the Postgres code.
The change is not at all transparent for code that doesn't use foreach()
but chases lists "by hand" using lnext(). The largest share of such
code in the backend is in loops that were maintaining "prev" and "next"
variables in addition to the current-cell pointer, in order to delete
list cells efficiently using list_delete_cell(). However, we no longer
need a previous-cell pointer to delete a list cell efficiently. Keeping
a next-cell pointer doesn't work, as explained above, but we can improve
matters by changing such code to use a regular foreach() loop and then
using the new macro foreach_delete_current() to delete the current cell.
(This macro knows how to update the associated foreach loop's state so
that no cells will be missed in the traversal.)
There remains a nontrivial risk of code assuming that a ListCell *
pointer will remain good over an operation that could now move the list
contents. To help catch such errors, list.c can be compiled with a new
define symbol DEBUG_LIST_MEMORY_USAGE that forcibly moves list contents
whenever that could possibly happen. This makes list operations
significantly more expensive so it's not normally turned on (though it
is on by default if USE_VALGRIND is on).
There are two notable API differences from the previous code:
* lnext() now requires the List's header pointer in addition to the
current cell's address.
* list_delete_cell() no longer requires a previous-cell argument.
These changes are somewhat unfortunate, but on the other hand code using
either function needs inspection to see if it is assuming anything
it shouldn't, so it's not all bad.
Programmers should be aware of these significant performance changes:
* list_nth() and related functions are now O(1); so there's no
major access-speed difference between a list and an array.
* Inserting or deleting a list element now takes time proportional to
the distance to the end of the list, due to moving the array elements.
(However, it typically *doesn't* require palloc or pfree, so except in
long lists it's probably still faster than before.) Notably, lcons()
used to be about the same cost as lappend(), but that's no longer true
if the list is long. Code that uses lcons() and list_delete_first()
to maintain a stack might usefully be rewritten to push and pop at the
end of the list rather than the beginning.
* There are now list_insert_nth...() and list_delete_nth...() functions
that add or remove a list cell identified by index. These have the
data-movement penalty explained above, but there's no search penalty.
* list_concat() and variants now copy the second list's data into
storage belonging to the first list, so there is no longer any
sharing of cells between the input lists. The second argument is
now declared "const List *" to reflect that it isn't changed.
This patch just does the minimum needed to get the new implementation
in place and fix bugs exposed by the regression tests. As suggested
by the foregoing, there's a fair amount of followup work remaining to
do.
Also, the ENABLE_LIST_COMPAT macros are finally removed in this
commit. Code using those should have been gone a dozen years ago.
Patch by me; thanks to David Rowley, Jesper Pedersen, and others
for review.
Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us
match_clause_to_partition_key incorrectly would return
PARTCLAUSE_UNSUPPORTED if a bool qual could not be matched to the current
partition key. This was a problem, as it causes the calling function to
discard the qual and not try to match it to any other partition key. If
there was another partition key which did match this qual, then the qual
would not be checked again and we could fail to prune some partitions.
The worst this could do was to cause partitions not to be pruned when they
could have been, so there was no danger of incorrect query results here.
Fix this by changing match_boolean_partition_clause to have it return a
PartClauseMatchStatus rather than a boolean value. This allows it to
communicate if the qual is unsupported or if it just does not match this
particular partition key, previously these two cases were treated the
same. Now, if match_clause_to_partition_key is unable to match the qual
to any other qual type then we can simply return the value from the
match_boolean_partition_clause call so that the calling function properly
treats the qual as either unmatched or unsupported.
Reported-by: Rares Salcudean
Reviewed-by: Amit Langote
Backpatch-through: 11 where partition pruning was introduced
Discussion: https://postgr.es/m/CAHp_FN2xwEznH6oyS0hNTuUUZKp5PvegcVv=Co6nBXJ+mC7Y5w@mail.gmail.com
We forgot to map column numbers to/from the default partition for
various operations, leading to valid cases failing with spurious
errors, such as
ERROR: attribute N of type some_partition has been dropped
It was also possible that the search for conflicting rows in the default
partition when attaching another partition would fail to detect some.
Secondarily, it was also possible that such a search should be skipped
(because the constraint was implied) but wasn't.
Fix all this by mapping column numbers when necessary.
Reported by: Daniel Wilches
Author: Amit Langote
Discussion: https://postgr.es/m/15873-8c61945d6b3ef87c@postgresql.org
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
Previously, gen_partprune_steps() always built executor pruning steps
using all suitable clauses, including those containing PARAM_EXEC
Params. This meant that the pruning steps were only completely safe
for executor run-time (scan start) pruning. To prune at executor
startup, we had to ignore the steps involving exec Params. But this
doesn't really work in general, since there may be logic changes
needed as well --- for example, pruning according to the last operator's
btree strategy is the wrong thing if we're not applying that operator.
The rules embodied in gen_partprune_steps() and its minions are
sufficiently complicated that tracking their incremental effects in
other logic seems quite impractical.
Short of a complete redesign, the only safe fix seems to be to run
gen_partprune_steps() twice, once to create executor startup pruning
steps and then again for run-time pruning steps. We can save a few
cycles however by noting during the first scan whether we rejected
any clauses because they involved exec Params --- if not, we don't
need to do the second scan.
In support of this, refactor the internal APIs in partprune.c to make
more use of passing information in the GeneratePruningStepsContext
struct, rather than as separate arguments.
This is, I hope, the last piece of our response to a bug report from
Alan Jackson. Back-patch to v11 where this code came in.
Discussion: https://postgr.es/m/FAD28A83-AC73-489E-A058-2681FA31D648@tvsquared.com
gen_prune_steps_from_opexps's notion of how to do this was overly
complicated and underly correct.
Per discussion of a report from Alan Jackson (though this fixes only one
aspect of that problem). Back-patch to v11 where this code came in.
Amit Langote
Discussion: https://postgr.es/m/FAD28A83-AC73-489E-A058-2681FA31D648@tvsquared.com
