Revise pg_dump's handling of inherited columns, which was last looked at
seriously in 2001, to eliminate several misbehaviors associated with
inherited default expressions and NOT NULL flags. In particular make sure
that a column is printed in a child table's CREATE TABLE command if and
only if it has attislocal = true; the former behavior would sometimes cause
a column to become marked attislocal when it was not so marked in the
source database. Also, stop relying on textual comparison of default
expressions to decide if they're inherited; instead, don't use
default-expression inheritance at all, but just install the default
explicitly at each level of the hierarchy. This fixes the
search-path-related misbehavior recently exhibited by Chester Young, and
also removes some dubious assumptions about the order in which ALTER TABLE
SET DEFAULT commands would be executed.
Back-patch to all supported branches.
The postmaster was coded to treat any unexpected exit of the startup
process (i.e., the WAL replay process) as a catastrophic crash, and not try
to restart it. This was OK so long as the startup process could not have
any sibling postmaster children. However, if a hot-standby backend
crashes, we SIGQUIT the startup process along with everything else, and the
resulting exit is hardly "unexpected". Treating it as such meant we failed
to restart a standby server after any child crash at all, not only a crash
of the WAL replay process as intended. Adjust that. Back-patch to 9.0
where hot standby was introduced.
Although we will not even issue an XLOG_TBLSPC_DROP WAL record unless
removal of the tablespace's directories succeeds, that does not guarantee
that the same operation will succeed during WAL replay. Foreseeable
reasons for it to fail include temp files created in the tablespace by Hot
Standby backends, wrong directory permissions on a standby server, etc etc.
The original coding threw ERROR if replay failed to remove the directories,
but that is a serious overreaction. Throwing an error aborts recovery,
and worse means that manual intervention will be needed to get the database
to start again, since otherwise the same error will recur on subsequent
attempts to replay the same WAL record. And the consequence of failing to
remove the directories is only that some probably-small amount of disk
space is wasted, so it hardly seems justified to throw an error.
Accordingly, arrange to report such failures as LOG messages and keep going
when a failure occurs during replay.
Back-patch to 9.0 where Hot Standby was introduced. In principle such
problems can occur in earlier releases, but Hot Standby increases the odds
of trouble significantly. Given the lack of field reports of such issues,
I'm satisfied with patching back as far as the patch applies easily.
Fix a longstanding thinko in replay of NEXTOID and checkpoint records: we
tried to advance nextOid only if it was behind the value in the WAL record,
but the comparison would draw the wrong conclusion if OID wraparound had
occurred since the previous value. Better to just unconditionally assign
the new value, since OID assignment shouldn't be happening during replay
anyway.
The consequences of a failure to update nextOid would be pretty minimal,
since we have long had the code set up to obtain another OID and try again
if the generated value is already in use. But in the worst case there
could be significant performance glitches while such loops iterate through
many already-used OIDs before finding a free one.
The odds of a wraparound happening during WAL replay would be small in a
crash-recovery scenario, and the length of any ensuing OID-assignment stall
quite limited anyway. But neither of these statements hold true for a
replication slave that follows a WAL stream for a long period; its behavior
upon going live could be almost unboundedly bad. Hence it seems worth
back-patching this fix into all supported branches.
Already fixed in HEAD in commit c6d76d7c82ebebb7210029f7382c0ebe2c558bca.
RestoreBkpBlocks was in the habit of zeroing and refilling the target
buffer; which was perfectly safe when the code was written, but is unsafe
during Hot Standby operation. The reason is that we have coding rules
that allow backends to continue accessing a tuple in a heap relation while
holding only a pin on its buffer. Such a backend could see transiently
zeroed data, if WAL replay had occasion to change other data on the page.
This has been shown to be the cause of bug #6425 from Duncan Rance (who
deserves kudos for developing a sufficiently-reproducible test case) as
well as Bridget Frey's re-report of bug #6200. It most likely explains the
original report as well, though we don't yet have confirmation of that.
To fix, change the code so that only bytes that are supposed to change will
change, even transiently. This actually saves cycles in RestoreBkpBlocks,
since it's not writing the same bytes twice.
Also fix seq_redo, which has the same disease, though it has to work a bit
harder to meet the requirement.
So far as I can tell, no other WAL replay routines have this type of bug.
In particular, the index-related replay routines, which would certainly be
broken if they had to meet the same standard, are not at risk because we
do not have coding rules that allow access to an index page when not
holding a buffer lock on it.
Back-patch to 9.0 where Hot Standby was added.
We log AccessExclusiveLocks for replay onto standby nodes,
but because of timing issues on ProcArray it is possible to
log a lock that is still held by a just committed transaction
that is very soon to be removed. To avoid any timing issue we
avoid applying locks made by transactions with InvalidXid.
Simon Riggs, bug report Tom Lane, diagnosis Pavan Deolasee
When default_text_search_config, default_tablespace, or temp_tablespaces
setting is set per-user or per-database, with an "ALTER USER/DATABASE SET
..." statement, don't throw an error if the text search configuration or
tablespace does not exist. In case of text search configuration, even if
it doesn't exist in the current database, it might exist in another
database, where the setting is intended to have its effect. This behavior
is now the same as search_path's.
Tablespaces are cluster-wide, so the same argument doesn't hold for
tablespaces, but there's a problem with pg_dumpall: it dumps "ALTER USER
SET ..." statements before the "CREATE TABLESPACE" statements. Arguably
that's pg_dumpall's fault - it should dump the statements in such an order
that the tablespace is created first and then the "ALTER USER SET
default_tablespace ..." statements after that - but it seems better to be
consistent with search_path and default_text_search_config anyway. Besides,
you could still create a dump that throws an error, by creating the
tablespace, running "ALTER USER SET default_tablespace", then dropping the
tablespace and running pg_dumpall on that.
Backpatch to all supported versions.
In commit 57664ed25e5dea117158a2e663c29e60b3546e1c, I made the planner
wrap non-simple-variable outputs of appendrel children (IOW, child SELECTs
of UNION ALL subqueries) inside PlaceHolderVars, in order to solve some
issues with EquivalenceClass processing. However, this means that any
upper-level WHERE clauses mentioning such outputs will now contain
PlaceHolderVars after they're pushed down into the appendrel child,
and that prevents indxpath.c from recognizing that they could be matched
to index expressions. To fix, add explicit stripping of PlaceHolderVars
from index operands, same as we have long done for RelabelType nodes.
Add a regression test covering both this and the plain-UNION case (which
is a totally different code path, but should also be able to do it).
Per bug #6416 from Matteo Beccati. Back-patch to 9.1, same as the
previous change.
Formerly we passed an empty list to each per-child-table invocation of
grouping_planner, and then merged the results into the global list.
However, that fails if there's a CTE attached to the statement, because
create_ctescan_plan uses the list to find the plan referenced by a CTE
reference; so it was unable to find any CTEs attached to the outer UPDATE
or DELETE. But there's no real reason not to use the same list throughout
the process, and doing so is simpler and faster anyway.
Per report from Josh Berkus of "could not find plan for CTE" failures.
Back-patch to 9.1 where we added support for WITH attached to UPDATE or
DELETE. Add some regression test cases, too.
We can't just skip initializing such subplans, because the referencing CTE
node will expect to find the subplan available when it initializes. That
in turn means that ExecInitModifyTable must allow the case (which actually
it needed to do anyway, since there's no guarantee that ModifyTable is
exactly at the top of the CTE plan tree). So move the complaint about not
being allowed in EvalPlanQual mode to execution instead of initialization.
Testing turned up yet another problem, which is that we'd try to
re-initialize the result relation's index list, leading to leaks and
dangling pointers.
Per report from Phil Sorber. Back-patch to 9.1 where data-modifying CTEs
were introduced.
Due to oversights, the encrypt_iv() and decrypt_iv() functions failed to
report certain types of invalid-input errors, and would instead return
random garbage values.
Marko Kreen, per report from Stefan Kaltenbrunner
have pg_upgrade allocate a maximum fixed size buffer for testing the
library file name, rather than base the allocation on the library name.
Backpatch to 9.1.
When the only remaining active transactions are READ ONLY, we do a "partial
cleanup" of committed transactions because certain types of conflicts
aren't possible anymore. For committed r/w transactions, we release the
SIREAD locks but keep the SERIALIZABLEXACT. However, for committed r/o
transactions, we can go further and release the SERIALIZABLEXACT too. The
problem was with the latter case: we were returning the SERIALIZABLEXACT to
the free list without removing it from the finished list.
The only real change in the patch is the SHMQueueDelete line, but I also
reworked some of the surrounding code to make it obvious that r/o and r/w
transactions are handled differently -- the existing code felt a bit too
clever.
Dan Ports
In commit 7b0d0e9356963d5c3e4d329a917f5fbb82a2ef05, I made CLUSTER and
VACUUM FULL try to preserve toast value OIDs from the original toast table
to the new one. However, if we have to copy both live and recently-dead
versions of a row that has a toasted column, those versions may well
reference the same toast value with the same OID. The patch then led to
duplicate-key failures as we tried to insert the toast value twice with the
same OID. (The previous behavior was not very desirable either, since it
would have silently inserted the same value twice with different OIDs.
That wastes space, but what's worse is that the toast values inserted for
already-dead heap rows would not be reclaimed by subsequent ordinary
VACUUMs, since they go into the new toast table marked live not deleted.)
To fix, check if the copied OID already exists in the new toast table, and
if so, assume that it stores the desired value. This is reasonably safe
since the only case where we will copy an OID from a previous toast pointer
is when toast_insert_or_update was given that toast pointer and so we just
pulled the data from the old table; if we got two different values that way
then we have big problems anyway. We do have to assume that no other
backend is inserting items into the new toast table concurrently, but
that's surely safe for CLUSTER and VACUUM FULL.
Per bug #6393 from Maxim Boguk. Back-patch to 9.0, same as the previous
patch.
The original coding examined the next character before verifying that
there *is* a next character. In the worst case with the input buffer
right up against the end of memory, this would result in a segfault.
Problem spotted by Paul Guyot; this commit extends his patch to fix an
additional case. In addition, make the code a tad more readable by not
overloading the usage of *tlen.
Historically we've used the SWPB instruction for TAS() on ARM, but this
is deprecated and not available on ARMv6 and later. Instead, make use
of a GCC builtin if available. We'll still fall back to SWPB if not,
so as not to break existing ports using older GCC versions.
Eventually we might want to try using __sync_lock_test_and_set() on some
other architectures too, but for now that seems to present only risk and
not reward.
Back-patch to all supported versions, since people might want to use any
of them on more recent ARM chips.
Martin Pitt
In commit 6545a901aaf84cb05212bb6a7674059908f527c3, I removed the mini SQL
lexer that was in pg_backup_db.c, thinking that it had no real purpose
beyond separating COPY data from SQL commands, which purpose had been
obsoleted by long-ago fixes in pg_dump's archive file format.
Unfortunately this was in error: that code was also used to identify
command boundaries in INSERT-style table data, which is run together as a
single string in the archive file for better compressibility. As a result,
direct-to-database restores from archive files made with --inserts or
--column-inserts fail in our latest releases, as reported by Dick Visser.
To fix, restore the mini SQL lexer, but simplify it by adjusting the
calling logic so that it's only required to cope with INSERT-style table
data, not arbitrary SQL commands. This allows us to not have to deal with
SQL comments, E'' strings, or dollar-quoted strings, none of which have
ever been emitted by dumpTableData_insert.
Also, fix the lexer to cope with standard-conforming strings, which was the
actual bug that the previous patch was meant to solve.
Back-patch to all supported branches. The previous patch went back to 8.2,
which unfortunately means that the EOL release of 8.2 contains this bug,
but I don't think we're doing another 8.2 release just because of that.
As noted by Heikki Linnakangas, the previous coding confused the "flags"
variable with the "mask" variable. The affect of this appears to be that
unlogged buffers would get written out at every checkpoint rather than
only at shutdown time. Although that's arguably an acceptable failure
mode, I'm back-patching this change, since it seems like a poor idea to
rely on this happening to work.
Certain things like typeglobs or readonly things like $^V cause
perl's SvPVutf8() to die nastily and crash the backend. To avoid
that bug we make a copy of the object, which will subsequently be
garbage collected.
Back patched to 9.1 where we first started using SvPVutf8().
Per -hackers discussion. Original problem reported by David Wheeler.
As previously coded, the QueryDesc's dest pointer was left dangling
(pointing at an already-freed receiver object) after ExecutorEnd. It's a
bit astonishing that it took us this long to notice, and I'm not sure that
the known problem case with SQL functions is the only one. Fix it by
saving and restoring the original receiver pointer, which seems the most
bulletproof way of ensuring any related bugs are also covered.
Per bug #6379 from Paul Ramsey. Back-patch to 8.4 where the current
handling of SELECT INTO was introduced.
Because coerce_type recurses into the argument of a CollateExpr,
coerce_to_target_type's longstanding code for detecting whether coerce_type
had actually done anything (to wit, returned a different node than it
passed in) was broken in 9.1. This resulted in unexpected failures in
hide_coercion_node; which was not the latter's fault, since it's critical
that we never call it on anything that wasn't inserted by coerce_type.
(Else we might decide to "hide" a user-written function call.)
Fix by removing and replacing the CollateExpr in coerce_to_target_type
itself. This is all pretty ugly but I don't immediately see a way to make
it nicer.
Per report from Jean-Yves F. Barbier.
We forgot to modify column ACLs, so privileges were still shown as having
been granted by the old owner. This meant that neither the new owner nor
a superuser could revoke the now-untraceable-to-table-owner permissions.
Per bug #6350 from Marc Balmer.
This has been wrong since column ACLs were added, so back-patch to 8.4.
The original coding of this function overlooked the possibility that
it could be passed anything except simple OpExpr indexquals. But
ScalarArrayOpExpr is possible too, and the code would probably crash
(and surely give ridiculous answers) in such a case. Add logic to try
to estimate sanely for such cases.
In passing, fix the treatment of inner-indexscan cost estimation: it was
failing to scale up properly for multiple iterations of a nestloop.
(I think somebody might've thought that index_pages_fetched() is linear,
but of course it's not.)
Report, diagnosis, and preliminary patch by Marti Raudsepp; I refactored
it a bit and fixed the cost estimation.
Back-patch into 9.1 where the bogus code was introduced.
smgrdounlink takes care to not throw an ERROR if it fails to unlink
something, but that caution was rendered useless by commit
3396000684b41e7e9467d1abc67152b39e697035, which put an smgrexists call in
front of it; smgrexists *does* throw error if anything looks funny, such
as getting a permissions error from trying to open the file. If that
happens post-commit, you get a PANIC, and what's worse the same logic
appears in the WAL replay code, so the database even fails to restart.
Restore the intended behavior by removing the smgrexists call --- it isn't
accomplishing anything that we can't do better by adjusting mdunlink's
ideas of whether it ought to warn about ENOENT or not.
Per report from Joseph Shraibman of unrecoverable crash after trying to
drop a table whose FSM fork had somehow gotten chmod'd to 000 permissions.
Backpatch to 8.4, where the bogus coding was introduced.
Ever since we introduced real prepared statements this should work for
different connections. The old solution just emulating prepared statements,
though, wasn't able to handle this.
Closes: #6309
Suggested solution from Tom Lane. Problem discovered, probably not
for the first time, while testing the mingw-w64 32 bit compiler.
Backpatched to all live branches.
I forgot to change the functions to use the PG_GETARG_INET_PP() macro,
when I changed DatumGetInetP() to unpack the datum, like Datum*P macros
usually do. Also, I screwed up the definition of the PG_GETARG_INET_PP()
macro, and didn't notice because it wasn't used.
This fixes the memory leak when sorting inet values, as reported
by Jochen Erwied and debugged by Andres Freund. Backpatch to 8.3, like
the previous patch that broke it.
we don't reach consistency before replaying all of the WAL. Rename the
variable to reachedConsistency, to make its intention clearer.
In master, that was an active bug because of the recent patch to
immediately PANIC if a reference to a missing page is found in WAL after
reaching consistency, as Tom Lane's test case demonstrated. In 9.1 and 9.0,
the only consequence was a misleading "consistent recovery state reached at
%X/%X" message in the log at the beginning of crash recovery (the database
is not consistent at that point yet). In 8.4, the log message was not
printed in crash recovery, even though there was a similar
reachedMinRecoveryPoint local variable that was also set early. So,
backpatch to 9.1 and 9.0.
Make sure all calls are protected by HAVE_READLINK, and get the buffer
overflow tests right. Be a bit more paranoid about string length in
_tarWriteHeader(), too.
We don't have any such platforms now, but might in the future.
Also, detect cases when a tablespace symlink points to a path that
is longer than we can handle, and give a warning.
This makes it possible to use a libpq app with home directory set
to /dev/null, for example - treating it the same as if the file
doesn't exist (which it doesn't).
Per bug #6302, reported by Diego Elio Petteno
PGresults used to be read-only from the application's viewpoint, but now
that we've exposed various functions that allow modification of a PGresult,
that sweeping statement is no longer accurate. Noted by Dmitriy Igrishin.
Since record[] uses array_in, it needs to have its element type passed
as typioparam. In HEAD and 9.1, this fix essentially reverts commit
9bc933b2125a5358722490acbc50889887bf7680, which was a hack that is no
longer needed since domains don't set their typelem anymore. Before
that, adjust the logic so that only domains are excluded from being
treated like arrays, rather than assuming that only base types should
be included. Add a regression test to demonstrate the need for this.
Per report from Maxim Boguk.
Back-patch to 8.4, where type record[] was added.
