On closer inspection, whining in restore_toc_entries_parallel is really
much too late for any user-facing error case. The right place to do it
is at the start of RestoreArchive(), before we've done anything interesting
(suh as trying to DROP all the targets ...)
Back-patch to 8.4, where parallel restore was introduced.
If we are unable to do a parallel restore because the input file is stdin
or is otherwise unseekable, we should complain and fail immediately, not
after having done some of the restore. Complaining once per thread isn't
so cool either, and the messages should be worded to make it clear this is
an unsupported case not some weird race-condition bug. Per complaint from
Lonni Friedman.
Back-patch to 8.4, where parallel restore was introduced.
These days, such a response is far more likely to signify a server-side
problem, such as fork failure. Reporting "server does not support SSL"
(in sslmode=require) could be quite misleading. But the results could
be even worse in sslmode=prefer: if the problem was transient and the
next connection attempt succeeds, we'll have silently fallen back to
protocol version 2.0, possibly disabling features the user needs.
Hence, it seems best to just eliminate the assumption that backing off
to non-SSL/2.0 protocol is the way to recover from an "E" response, and
instead treat the server error the same as we would in non-SSL cases.
I tested this change against a pre-7.0 server, and found that there
was a second logic bug in the "prefer" path: the test to decide whether
to make a fallback connection attempt assumed that we must have opened
conn->ssl, which in fact does not happen given an "E" response. After
fixing that, the code does indeed connect successfully to pre-7.0,
as long as you didn't set sslmode=require. (If you did, you get
"Unsupported frontend protocol", which isn't completely off base
given the server certainly doesn't support SSL.)
Since there seems no reason to believe that pre-7.0 servers exist anymore
in the wild, back-patch to all supported branches.
There are assorted situations wherein PQconnectPoll() will abandon a
connection attempt and try again with different parameters (eg, SSL versus
not SSL). However, the code forgot to discard any pending data in libpq's
I/O buffers when doing this. In at least one case (server returns E
message during SSL negotiation), there is unread input data which bollixes
the next connection attempt. I have not checked to see whether this is
possible in the other cases where we close the socket and retry, but it
seems like a matter of good defensive programming to add explicit
buffer-flushing code to all of them.
This is one of several issues exposed by Daniel Farina's report of
misbehavior after a server-side fork failure.
This has been wrong since forever, so back-patch to all supported branches.
tsvector_concat() allocated its result workspace using the "conservative"
estimate of the sum of the two input tsvectors' sizes. Unfortunately that
wasn't so conservative as all that, because it supposed that the number of
pad bytes required could not grow. Which it can, as per test case from
Jesper Krogh, if there's a mix of lexemes with positions and lexemes
without them in the input data. The fix is to assume that we might add
a not-previously-present pad byte for each and every lexeme in the two
inputs; which really is conservative, but it doesn't seem worthwhile to
try to be more precise.
This is an aboriginal bug in tsvector_concat, so back-patch to all
versions containing it.
This was deemed unnecessary initially but in later discussion it was
agreed otherwise.
Original file from Kevin Grittner, allegedly from Dan Ports.
I had to clean up whitespace a bit per changes from Heikki.
Per previous experimentation, backtracking slows down lexing performance
significantly (by about a third). It's usually pretty easy to avoid, just
need to have rules that accept an incomplete construct and do whatever the
lexer would have done otherwise.
The backtracking was introduced by the patch that added quoted variable
substitution. Back-patch to 9.0 where that was added.
For an empty index, the pgstatindex() function would compute 0.0/0.0 for
its avg_leaf_density and leaf_fragmentation outputs. On machines that
follow the IEEE float arithmetic standard with any care, that results in
a NaN. However, per report from Rushabh Lathia, Microsoft couldn't
manage to get this right, so you'd get a bizarre error on Windows.
Fix by forcing the results to be NaN explicitly, rather than relying on
the division operator to give that or the snprintf function to print it
correctly. I have some doubts that this is really the most useful
definition, but it seems better to remain backward-compatible with
those platforms for which the behavior wasn't completely broken.
Back-patch to 8.2, since the code is like that in all current releases.
The previous coding resulted in contrib modules unintentionally overriding
the use of CONTRIB_TESTDB. There seems no particularly good reason to
allow that (after all, the makefile can set CONTRIB_TESTDB if that's really
what it intends).
In passing, document REGRESS_OPTS where the other pgxs.mk options are
documented.
Back-patch to 9.1 --- in prior versions, there were no cases of contrib
modules setting REGRESS_OPTS without including the --dbname switch, so
while the coding was fragile there was no actual bug.
We'll have to settle for just listing the extensions' data types,
since function arguments seem to sort differently in different locales.
Per buildfarm results.
When we implemented extensions, we made findDependentObjects() treat
EXTENSION dependency links similarly to INTERNAL links. However, that
logic contained an implicit assumption that an object could have at most
one INTERNAL dependency, so it did not work correctly for objects having
both INTERNAL and DEPENDENCY links. This led to failure to drop some
extension member objects when dropping the extension. Furthermore, we'd
never actually exercised the case of recursing to an internally-referenced
(owning) object from anything other than a NORMAL dependency, and it turns
out that passing the incoming dependency's flags to the owning object is
the Wrong Thing. This led to sometimes dropping a whole extension silently
when we should have rejected the drop command for lack of CASCADE.
Since we obviously were under-testing extension drop scenarios, add some
regression test cases. Unfortunately, such test cases require some
extensions (duh), so we can't test for problems in the core regression
tests. I chose to add them to the earthdistance contrib module, which is
a good test case because it has a dependency on the cube contrib module.
Back-patch to 9.1. Arguably these are pre-existing bugs in INTERNAL
dependency handling, but since it appears that the cases can never arise
pre-9.1, I'll refrain from back-patching the logic changes further than
that.
When creating a new schema for a non-relocatable extension, we neglected
to check whether the calling user has permission to create schemas.
That didn't matter in the original coding, since we had already checked
superuserness, but in the new dispensation where users need not be
superusers, we should check it. Use CreateSchemaCommand() rather than
calling NamespaceCreate() directly, so that we also enforce the rules
about reserved schema names.
Per complaint from KaiGai Kohei, though this isn't the same as his patch.
set_append_rel_pathlist supposed that, while computing per-column width
estimates for the appendrel, it could ignore child rels for which the
translated reltargetlist entry wasn't a Var. This gave rise to completely
silly estimates in some common cases, such as constant outputs from some or
all of the arms of a UNION ALL. Instead, fall back on get_typavgwidth to
estimate from the value's datatype; which might be a poor estimate but at
least it's not completely wacko.
That problem was exposed by an Assert in set_subquery_size_estimates, which
unfortunately was still overoptimistic even with that fix, since we don't
compute attr_widths estimates for appendrels that are entirely excluded by
constraints. So remove the Assert; we'll just fall back on get_typavgwidth
in such cases.
Also, since set_subquery_size_estimates calls set_baserel_size_estimates
which calls set_rel_width, there's no need for set_subquery_size_estimates
to call get_typavgwidth; set_rel_width will handle it for us if we just
leave the estimate set to zero. Remove the unnecessary code.
Per report from Erik Rijkers and subsequent investigation.
The previous coding would result in deleting and not re-creating the
extension membership pg_depend rows, since there was no
CommandCounterIncrement that would allow recordDependencyOnCurrentExtension
to see that the deletion had happened. Make it work like the shell type
case, ie, keep the existing entries (and then throw an error if they're for
the wrong extension).
Per bug #6172 from Hitoshi Harada. Investigation and fix by Dimitri
Fontaine.
Due to tuple-slot mismanagement, evaluation of WHEN conditions for AFTER
ROW UPDATE triggers could crash if there had been a BEFORE ROW trigger
fired for the same update. Fix by not trying to overload the use of
estate->es_trig_tuple_slot. Per report from Yoran Heling.
Back-patch to 9.0, when trigger WHEN conditions were introduced.
As pointed out by Sergey Koposov, repeated invocations of tbm_lossify can
make building a large tidbitmap into an O(N^2) operation. To fix, make
sure we remove more than the minimum amount of information per call, and
add a fallback path to behave sanely if we're unable to fit the bitmap
within the requested amount of memory.
This has been wrong since the tidbitmap code was written, so back-patch
to all supported branches.
contrib/xml2 can get by without libxslt; the relevant features just
won't work. But if doesn't have libxml2, or if sepgsql doesn't have
libselinux, the link succeeds but the module then fails to work at load
time. To avoid that, link the require libraries unconditionally, so
that it will be clear at link-time that there is a problem.
Per discussion with Tom Lane and KaiGai Kohei.
Now that we have a test that requires nondefault settings to pass, it seems
like we'd better mention that detail in the directions about how to run the
tests.
Also do some very minor copy-editing.
isolation regression tests.
Alvaro committed these fixes to master branch on Tue Jul 29th, as part of
Noah Misch's patch. The rest of that patch is not needed on 9.1, but this
part should be backpatched.
order of begin, prepare, and commit of three concurrent transactions that
have conflicts between them.
The test runs for a quite long time, and the expected output file is huge,
but this test caught some serious bugs during development, so seems
worthwhile to keep. The test uses prepared transactions, so it fails if the
server has max_prepared_transactions=0. Because of that, it's marked as
"ignore" in the schedule file.
Dan Ports
Because of ABI tagging, the library version number might no longer be
exactly the Python version number, so do extra lookups. This affects
installations without a shared library, such as ActiveState's
installer.
Also update the way to detect the location of the 'config' directory,
which can also be versioned.
Ashesh Vashi
Module initialization functions in Python 3 must have external
linkage, because PyMODINIT_FUNC does dllexport on Windows-like
platforms. Without this change, the build with Python 3 fails on
Windows.
Dropped columns within a composite type were not handled correctly.
Also, we did not check for whether a composite result type had changed
since we cached the information about it.
Jan Urbański, per a bug report from Jean-Baptiste Quenot
Bug reported by David Wheeler, fix by Alex Hunsaker.
# Please enter the commit message for your changes. Lines starting
# with '#' will be ignored, and an empty message aborts the commit.
# On branch master
# Changes to be committed:
# (use "git reset HEAD <file>..." to unstage)
#
# modified: src/pl/plperl/plperl.c
#
# Untracked files:
# (use "git add <file>..." to include in what will be committed)
#
# autom4te.cache/
# configure.in~
# doc/src/sgml/ref/grant.sgml~
# src/backend/port/win32_latch.c~
# src/bin/psql/command.c~
# src/include/pg_config.h.win32~
# src/pl/plpython/plpython.c~
# src/tools/msvc/pgbison.bat~
# src/tools/msvc/pgbison.pl.bak
# src/tools/msvc/pgflex.bat~
# src/tools/msvc/pgflex.pl.bak
# src/tools/pgindent/README~
# src/tools/pgindent/pgindent.pl
# src/tools/pgindent/pgindent.pl~
# xxxxx
# yyyyyy
streamed backup, throw an error and refuse to start up. The restore has not
finished correctly in that case and the data directory is possibly corrupt.
We already errored out in case of archive recovery, but could not during
crash recovery because we couldn't distinguish between the case that
pg_start_backup() was called and the database then crashed (must not error,
data is OK), and the case that we're restoring from a backup and not all
the needed WAL was replayed (data can be corrupt).
To distinguish those cases, add a line to backup_label to indicate
whether the backup was taken with pg_start/stop_backup(), or by streaming
(ie. pg_basebackup).
This is a different implementation than what I committed to 9.2 a week ago.
That implementation was not back-patchable because it required re-initdb.
Fujii Masao
The TID isn't stable enough: we might queue an sinval event before a VACUUM
FULL, and then process it afterwards, when the target tuple no longer has
the same TID. So we must invalidate entries on the basis of hash value
only. The old coding can be shown to result in various bizarre,
hard-to-reproduce errors in the presence of concurrent VACUUM FULLs on
system catalogs, and could easily result in permanent catalog corruption,
up to and including complete loss of tables.
This commit is just a minimal fix that removes the unsafe comparison.
We should remove transmission of the tuple TID from sinval messages
altogether, and then arrange to suppress the extra message in the common
case of a heap_update that doesn't change the key hashvalue. But that's
going to be much more invasive, and will only produce a probably-marginal
performance gain, so it doesn't seem like material for a back-patch.
Back-patch to 9.0. Before that, VACUUM FULL refused to do any tuple moving
if it found any INSERT_IN_PROGRESS or DELETE_IN_PROGRESS tuples (and
CLUSTER would give up altogether), so there was no risk of moving a tuple
that might be the subject of an unsent sinval message.
We have to be sure that we have revalidated each nailed-in-cache relcache
entry before we try to use it to load data for some other relcache entry.
The introduction of "mapped relations" in 9.0 broke this, because although
we updated the state kept in relmapper.c early enough, we failed to
propagate that information into relcache entries soon enough; in
particular, we could try to fetch pg_class rows out of pg_class before
we'd updated its relcache entry's rd_node.relNode value from the map.
This bug accounts for Dave Gould's report of failures after "vacuum full
pg_class", and I believe that there is risk for other system catalogs
as well.
The core part of the fix is to copy relmapper data into the relcache
entries during "phase 1" in RelationCacheInvalidate(), before they'll be
used in "phase 2". To try to future-proof the code against other similar
bugs, I also rearranged the order in which nailed relations are visited
during phase 2: now it's pg_class first, then pg_class_oid_index, then
other nailed relations. This should ensure that RelationClearRelation can
apply RelationReloadIndexInfo to all nailed indexes without risking use
of not-yet-revalidated relcache entries.
Back-patch to 9.0 where the relation mapper was introduced.
This works around the problem that a catalog cache entry might contain a
toast pointer that we try to dereference just as a VACUUM FULL completes
on that catalog. We will see the sinval message on the cache entry when
we acquire lock on the toast table, but by that point we've already told
tuptoaster.c "here's the pointer to fetch", so it's difficult from a code
structural standpoint to update the pointer before we use it. Much less
painful to ensure that toast pointers are not invalidated in the first
place. We have to add a bit of code to deal with the case that a value
that previously wasn't toasted becomes so; but that should be a
seldom-exercised corner case, so the inefficiency shouldn't be significant.
Back-patch to 9.0. In prior versions, we didn't allow CLUSTER on system
catalogs, and VACUUM FULL didn't result in reassignment of toast OIDs, so
there was no problem.
The previous code tried to synchronize by unlinking the init file twice,
but that doesn't actually work: it leaves a window wherein a third process
could read the already-stale init file but miss the SI messages that would
tell it the data is stale. The result would be bizarre failures in catalog
accesses, typically "could not read block 0 in file ..." later during
startup.
Instead, hold RelCacheInitLock across both the unlink and the sending of
the SI messages. This is more straightforward, and might even be a bit
faster since only one unlink call is needed.
This has been wrong since it was put in (in 2002!), so back-patch to all
supported releases.
When streaming including WAL, the size estimate will always be incorrect,
since we don't know how much WAL is included. To make sure the output doesn't
look completely unreasonable, this patch increases the total size whenever we
go past the estimate, to make sure we never go above 100%.
