Since 5a1dfde833, 2PC filenames use FullTransactionId. Thus, it needs to
convert TransactionId to FullTransactionId in StandbyTransactionIdIsPrepared()
using TransamVariables->nextXid. However, ProcArrayApplyRecoveryInfo()
first releases locks with usage StandbyTransactionIdIsPrepared(), then advances
TransamVariables->nextXid. This sequence of actions could cause errors.
This commit makes ProcArrayApplyRecoveryInfo() advance
TransamVariables->nextXid before releasing locks.
Reported-by: Thomas Munro, Michael Paquier
Discussion: https://postgr.es/m/CA%2BhUKGLj_ve1_pNAnxwYU9rDcv7GOhsYXJt7jMKSA%3D5-6ss-Cw%40mail.gmail.com
Discussion: https://postgr.es/m/Zadp9f4E1MYvMJqe%40paquier.xyz
jit.c and dfgr.c had a copy of the same code to check if a file exists
or not, with a twist: jit.c did not check for EACCES when failing the
stat() call for the path whose existence is tested. This refactored
routine will be used by an upcoming patch.
Reviewed-by: Ashutosh Bapat
Discussion: https://postgr.es/m/ZTiV8tn_MIb_H2rE@paquier.xyz
Both lwlocknames.txt and wait_event_names.txt contain a list of all
the predefined LWLocks, i.e., those with predefined positions
within MainLWLockArray. It is easy to miss one or the other,
especially since the list in wait_event_names.txt omits the "Lock"
suffix from all the LWLock wait events. This commit adds a cross-
check of these lists to the script that generates lwlocknames.h.
If the lists do not match exactly, building will fail.
Suggested-by: Robert Haas
Reviewed-by: Robert Haas, Michael Paquier, Bertrand Drouvot
Discussion: https://postgr.es/m/20240102173120.GA1061678%40nathanxps13
A typo has been introduced by 31966b151e when updating the state of a
local buffer when a temporary relation is extended, for the case of a
block included in the relation range extended, when it is already found
in the hash table holding the local buffers. In this case, BM_VALID
should be cleared, but the buffer state was changed so as BM_VALID
remained while clearing the other flags.
As reported on the thread, it was possible to corrupt the state of the
local buffers on ENOSPC, but the states would be corrupted on any kind
of ERROR during the relation extend (like partial writes or some other
errno).
Reported-by: Alexander Lakhin
Author: Tender Wang
Reviewed-by: Richard Guo, Alexander Lakhin, Michael Paquier
Discussion: https://postgr.es/m/18259-6e256429825dd435@postgresql.org
Backpatch-through: 16
There are a lot of Perl scripts in the tree, mostly code generation
and TAP tests. Occasionally, these scripts produce warnings. These
are probably always mistakes on the developer side (true positives).
Typical examples are warnings from genbki.pl or related when you make
a mess in the catalog files during development, or warnings from tests
when they massage a config file that looks different on different
hosts, or mistakes during merges (e.g., duplicate subroutine
definitions), or just mistakes that weren't noticed because there is a
lot of output in a verbose build.
This changes all warnings into fatal errors, by replacing
use warnings;
by
use warnings FATAL => 'all';
in all Perl files.
Discussion: https://www.postgresql.org/message-id/flat/06f899fd-1826-05ab-42d6-adeb1fd5e200%40eisentraut.org
To take an incremental backup, you use the new replication command
UPLOAD_MANIFEST to upload the manifest for the prior backup. This
prior backup could either be a full backup or another incremental
backup. You then use BASE_BACKUP with the INCREMENTAL option to take
the backup. pg_basebackup now has an --incremental=PATH_TO_MANIFEST
option to trigger this behavior.
An incremental backup is like a regular full backup except that
some relation files are replaced with files with names like
INCREMENTAL.${ORIGINAL_NAME}, and the backup_label file contains
additional lines identifying it as an incremental backup. The new
pg_combinebackup tool can be used to reconstruct a data directory
from a full backup and a series of incremental backups.
Patch by me. Reviewed by Matthias van de Meent, Dilip Kumar, Jakub
Wartak, Peter Eisentraut, and Álvaro Herrera. Thanks especially to
Jakub for incredibly helpful and extensive testing.
Discussion: http://postgr.es/m/CA+TgmoYOYZfMCyOXFyC-P+-mdrZqm5pP2N7S-r0z3_402h9rsA@mail.gmail.com
When active, this process writes WAL summary files to
$PGDATA/pg_wal/summaries. Each summary file contains information for a
certain range of LSNs on a certain TLI. For each relation, it stores a
"limit block" which is 0 if a relation is created or destroyed within
a certain range of WAL records, or otherwise the shortest length to
which the relation was truncated during that range of WAL records, or
otherwise InvalidBlockNumber. In addition, it stores a list of blocks
which have been modified during that range of WAL records, but
excluding blocks which were removed by truncation after they were
modified and never subsequently modified again.
In other words, it tells us which blocks need to copied in case of an
incremental backup covering that range of WAL records. But this
doesn't yet add the capability to actually perform an incremental
backup; the next patch will do that.
A new parameter summarize_wal enables or disables this new background
process. The background process also automatically deletes summary
files that are older than wal_summarize_keep_time, if that parameter
has a non-zero value and the summarizer is configured to run.
Patch by me, with some design help from Dilip Kumar and Andres Freund.
Reviewed by Matthias van de Meent, Dilip Kumar, Jakub Wartak, Peter
Eisentraut, and Álvaro Herrera.
Discussion: http://postgr.es/m/CA+TgmoYOYZfMCyOXFyC-P+-mdrZqm5pP2N7S-r0z3_402h9rsA@mail.gmail.com
smgrreadv() and smgrwritev() and their md.c implementations call
FileReadV() and FileWriteV(). A range of disk blocks beginning at
'blocknum' and extending for 'nblocks' can be scattered to or gathered
from multiple buffers with a single system call. The traditional
smgrread() and smgrwrite() functions are implemented in terms of the new
functions.
Later commits will introduce calls with nblocks > 1, but the following
behavioral changes can be seen already:
* After a short transfer we'll now retry until we eventually read 0
bytes (= EOF) or get ENOSPC, EDQUOT, EFBIG etc, where previously we
would infer the reason. Retrying is consistent with xlog.c's
treatment of large WAL writes, and arguably also xlog.c and fd.c's
treatment of EINTR. Arbitrary short returns for larger transfers have
been observed on several OSes, and might in theory also happen for
transient reasons with our own pg_p*v() fallback code.
* After unexpected EOF or -1, the error thrown now talks about
a range even for the single block case, eg "blocks 42..42".
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CA+hUKGJkOiOCa+mag4BF+zHo7qo=o9CFheB8=g6uT5TUm2gkvA@mail.gmail.com
Originally, this routine relied on track_io_timing to check if a time
interval for an I/O operation stored in pg_stat_io should be initialized
or not. However, the addition of WAL statistics to pg_stat_io requires
that the initialization happens when track_wal_io_timing is enabled,
which is dependent on the code path where the I/O operation happens.
Author: Nazir Bilal Yavuz
Discussion: https://postgr.es/m/CAN55FZ3AiQ+ZMxUuXnBpd0Rrh1YhwJ5FudkHg=JU0P+-W8T4Vg@mail.gmail.com
Previously smgrprefetch() could issue POSIX_FADV_WILLNEED advice for a
single block at a time. Add an nblocks argument so that we can do the
same for a range of blocks. This usually produces a single system call,
but might need to loop if it crosses a segment boundary. Initially it
is only called with nblocks == 1, but proposed patches will make wider
calls.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi> (earlier version)
Discussion: https://postgr.es/m/CA+hUKGJkOiOCa+mag4BF+zHo7qo=o9CFheB8=g6uT5TUm2gkvA@mail.gmail.com
In v16 and up (since commit afbfc0298), large object ownership
checking has been broken because object_ownercheck() didn't take care
of the discrepancy between our object-address representation of large
objects (classId == LargeObjectRelationId) and the catalog where their
ownership info is actually stored (LargeObjectMetadataRelationId).
This resulted in failures such as "unrecognized class ID: 2613"
when trying to update blob properties as a non-superuser.
Poking around for related bugs, I found that AlterObjectOwner_internal
would pass the wrong classId to the PostAlterHook in the no-op code
path where the large object already has the desired owner. Also,
recordExtObjInitPriv checked for the wrong classId; that bug is only
latent because the stanza is dead code anyway, but as long as we're
carrying it around it should be less wrong. These bugs are quite old.
In HEAD, we can reduce the scope for future bugs of this ilk by
changing AlterObjectOwner_internal's API to let the translation happen
inside that function, rather than requiring callers to know about it.
A more bulletproof fix, perhaps, would be to start using
LargeObjectMetadataRelationId as the dependency and object-address
classId for blobs. However that has substantial risk of breaking
third-party code; even within our own code, it'd create hassles
for pg_dump which would have to cope with a version-dependent
representation. For now, keep the status quo.
Discussion: https://postgr.es/m/2650449.1702497209@sss.pgh.pa.us
FileReadV() and FileWriteV() adapt pg_preadv() and pg_pwritev() for
fd.c's virtual file descriptors. The simple FileRead() and FileWrite()
functions are now implemented in terms of the vectored functions, to
avoid code duplication, and they are converted back to the corresponding
simple system calls further down (commit 15c9ac36). Later work will
make more interesting multi-iovec calls.
The traditional behavior of reporting a "fake" ENOSPC error is
simplified. It's now always set for non-failing writes, for the benefit
of callers that expect to log a meaningful "%m" if they determine that
the write was short. (Perhaps we should consider getting rid of that
expectation one day.)
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CA+hUKGJkOiOCa+mag4BF+zHo7qo=o9CFheB8=g6uT5TUm2gkvA@mail.gmail.com
This GUC was intended as a debugging help in the 9.0 area when hot
standby and streaming replication were being developped, able to offer
more information at LOG level rather than DEBUGn. There are more tools
available these days that are able to offer rather equivalent
information, like pg_waldump introduced in 9.3. It is not obvious how
this facility is useful these days, so let's remove it.
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/ZXEXEAUVFrvpquSd@paquier.xyz
The order of process initialization steps is now more consistent
between !EXEC_BACKEND and EXEC_BACKEND modes. InitProcess() is called
at the same place in either mode. We can now also move the
AttachSharedMemoryStructs() call into InitProcess() itself. This
reduces the number of "#ifdef EXEC_BACKEND" blocks.
Reviewed-by: Tristan Partin, Andres Freund, Alexander Lakhin
Discussion: https://www.postgresql.org/message-id/7a59b073-5b5b-151e-7ed3-8b01ff7ce9ef@iki.fi
For clarity, have separate functions for *creating* the shared memory
and semaphores at postmaster or single-user backend startup, and
for *attaching* to existing shared memory structures in EXEC_BACKEND
case. CreateSharedMemoryAndSemaphores() is now called only at
postmaster startup, and a new AttachSharedMemoryStructs() function is
called at backend startup in EXEC_BACKEND mode.
Reviewed-by: Tristan Partin, Andres Freund
Discussion: https://www.postgresql.org/message-id/7a59b073-5b5b-151e-7ed3-8b01ff7ce9ef@iki.fi
InitAuxiliaryProcess() closely resembles InitProcess(), but it didn't
call InitLWLockAccess(). But because InitLWLockAccess() is a no-op
unless compiled with LWLOCK_STATS, and everything works even if it's
not called, the only consequence was that the stats were not printed
for aux processes.
This was an oversight in commit 1c6821be31, in version 9.5, so it is
missing in all supported branches. But since it only affects
developers using LWLOCK_STATS and no one has complained, no
backpatching.
Discussion: https://www.postgresql.org/message-id/20231130202648.7k6agmuizdilufnv@awork3.anarazel.de
Quotes are applied to GUCs in a very inconsistent way across the code
base, with a mix of double quotes or no quotes used. This commit
removes double quotes around all the GUC names that are obviously
referred to as parameters with non-English words (use of underscore,
mixed case, etc).
This is the result of a discussion with Álvaro Herrera, Nathan Bossart,
Laurenz Albe, Peter Eisentraut, Tom Lane and Daniel Gustafsson.
Author: Peter Smith
Discussion: https://postgr.es/m/CAHut+Pv-kSN8SkxSdoHano_wPubqcg5789ejhCDZAcLFceBR-w@mail.gmail.com
We've had repeated bugs in the area of handling SLRU wraparound in the past,
some of which have caused data loss. Switching to an indexing system for SLRUs
that does not wrap around should allow us to get rid of a whole bunch
of problems and improve the overall reliability of the system.
This particular patch however only changes the indexing and doesn't address
the wraparound per se. This is going to be done in the following patches.
Author: Maxim Orlov, Aleksander Alekseev, Alexander Korotkov, Teodor Sigaev
Author: Nikita Glukhov, Pavel Borisov, Yura Sokolov
Reviewed-by: Jacob Champion, Heikki Linnakangas, Alexander Korotkov
Reviewed-by: Japin Li, Pavel Borisov, Tom Lane, Peter Eisentraut, Andres Freund
Reviewed-by: Andrey Borodin, Dilip Kumar, Aleksander Alekseev
Discussion: https://postgr.es/m/CACG%3DezZe1NQSCnfHOr78AtAZxJZeCvxrts0ygrxYwe%3DpyyjVWA%40mail.gmail.com
Discussion: https://postgr.es/m/CAJ7c6TPDOYBYrnCAeyndkBktO0WG2xSdYduTF0nxq%2BvfkmTF5Q%40mail.gmail.com
A WaitEventSet holds file descriptors or event handles (on Windows).
If FreeWaitEventSet is not called, those fds or handles are leaked.
Use ResourceOwners to track WaitEventSets, to clean those up
automatically on error.
This was a live bug in async Append nodes, if a FDW's
ForeignAsyncRequest function failed. (In back branches, I will apply a
more localized fix for that based on PG_TRY-PG_FINALLY.)
The added test doesn't check for leaking resources, so it passed even
before this commit. But at least it covers the code path.
In the passing, fix misleading comment on what the 'nevents' argument
to WaitEventSetWait means.
Report by Alexander Lakhin, analysis and suggestion for the fix by
Tom Lane. Fixes bug #17828.
Reviewed-by: Alexander Lakhin, Thomas Munro
Discussion: https://www.postgresql.org/message-id/472235.1678387869@sss.pgh.pa.us
As coded, the start block calculated by BufFileAppend() would overflow
once more than 16k files are used with a default block size. This issue
existed before b1e5c9fa9a, but there's no reason not to be clean about
it.
Per report from Coverity, with a fix suggested by Tom Lane.
The code previously relied on "long" as type to track block numbers,
which would be 4 bytes in all Windows builds or any 32-bit builds. This
limited the code to be able to handle up to 16TB of data with the
default block size of 8kB, like during a CLUSTER. This code now relies
on a more portable int64, which should be more than enough for at least
the next 20 years to come.
This issue has been reported back in 2017, but nothing was done about it
back then, so here we go now.
Reported-by: Peter Geoghegan
Reviewed-by: Heikki Linnakangas
Discussion: https://postgr.es/m/CAH2-WznCscXnWmnj=STC0aSa7QG+BRedDnZsP=Jo_R9GUZvUrg@mail.gmail.com
This routine has been marked as NOT_USED since 20ad43b576 from 2000,
and a patch is planned to switch the logtape/tuplestore APIs to rely on
int64 rather than long for the block nunbers, which is more portable.
Keeping it is more confusing than anything at this stage, so let's get
rid of it entirely.
Thanks for Heikki Linnakangas for the poke on this one.
Discussion: https://postgr.es/m/5047be8c-7ee6-4dd5-af76-6c916c3103b4@iki.fi
Commit b7eda3e0e moved XidInMVCCSnapshot() from tqual.c into snapmgr.c,
but follow-up commit c91560def incorrectly updated this reference. We
could fix it, but as pointed out by Daniel Gustafsson, 1) the reader can
easily find the file that contains the definition of that function, e.g.
by grepping, and 2) this kind of reference is prone to going stale; so
let's just remove it.
Back-patch to all supported branches.
Reviewed by Daniel Gustafsson.
Discussion: https://postgr.es/m/CAPmGK145VdKkPBLWS2urwhgsfidbSexwY-9zCL6xSUJH%2BBTUUg%40mail.gmail.com
Instead of having a separate array/hash for each resource kind, use a
single array and hash to hold all kinds of resources. This makes it
possible to introduce new resource "kinds" without having to modify
the ResourceOwnerData struct. In particular, this makes it possible
for extensions to register custom resource kinds.
The old approach was to have a small array of resources of each kind,
and if it fills up, switch to a hash table. The new approach also uses
an array and a hash, but now the array and the hash are used at the
same time. The array is used to hold the recently added resources, and
when it fills up, they are moved to the hash. This keeps the access to
recent entries fast, even when there are a lot of long-held resources.
All the resource-specific ResourceOwnerEnlarge*(),
ResourceOwnerRemember*(), and ResourceOwnerForget*() functions have
been replaced with three generic functions that take resource kind as
argument. For convenience, we still define resource-specific wrapper
macros around the generic functions with the old names, but they are
now defined in the source files that use those resource kinds.
The release callback no longer needs to call ResourceOwnerForget on
the resource being released. ResourceOwnerRelease unregisters the
resource from the owner before calling the callback. That needed some
changes in bufmgr.c and some other files, where releasing the
resources previously always called ResourceOwnerForget.
Each resource kind specifies a release priority, and
ResourceOwnerReleaseAll releases the resources in priority order. To
make that possible, we have to restrict what you can do between
phases. After calling ResourceOwnerRelease(), you are no longer
allowed to remember any more resources in it or to forget any
previously remembered resources by calling ResourceOwnerForget. There
was one case where that was done previously. At subtransaction commit,
AtEOSubXact_Inval() would handle the invalidation messages and call
RelationFlushRelation(), which temporarily increased the reference
count on the relation being flushed. We now switch to the parent
subtransaction's resource owner before calling AtEOSubXact_Inval(), so
that there is a valid ResourceOwner to temporarily hold that relcache
reference.
Other end-of-xact routines make similar calls to AtEOXact_Inval()
between release phases, but I didn't see any regression test failures
from those, so I'm not sure if they could reach a codepath that needs
remembering extra resources.
There were two exceptions to how the resource leak WARNINGs on commit
were printed previously: llvmjit silently released the context without
printing the warning, and a leaked buffer io triggered a PANIC. Now
everything prints a WARNING, including those cases.
Add tests in src/test/modules/test_resowner.
Reviewed-by: Aleksander Alekseev, Michael Paquier, Julien Rouhaud
Reviewed-by: Kyotaro Horiguchi, Hayato Kuroda, Álvaro Herrera, Zhihong Yu
Reviewed-by: Peter Eisentraut, Andres Freund
Discussion: https://www.postgresql.org/message-id/cbfabeb0-cd3c-e951-a572-19b365ed314d%40iki.fi
These are functions where a lot of things happen between the
ResourceOwnerEnlarge and ResourceOwnerRemember calls. It's important
that there are no unrelated ResourceOwnerRemember calls in the code in
between, otherwise the reserved entry might be used up by the
intervening ResourceOwnerRemember and not be available at the intended
ResourceOwnerRemember call anymore. I don't see any bugs here, but the
longer the code path between the calls is, the harder it is to verify.
In bufmgr.c, there is a function similar to ResourceOwnerEnlarge,
ReservePrivateRefCountEntry(), to ensure that the private refcount
array has enough space. The ReservePrivateRefCountEntry() calls were
made at different places than the ResourceOwnerEnlargeBuffers()
calls. Move the ResourceOwnerEnlargeBuffers() and
ReservePrivateRefCountEntry() calls together for consistency.
Reviewed-by: Aleksander Alekseev, Michael Paquier, Julien Rouhaud
Reviewed-by: Kyotaro Horiguchi, Hayato Kuroda, Álvaro Herrera, Zhihong Yu
Reviewed-by: Peter Eisentraut, Andres Freund
Discussion: https://www.postgresql.org/message-id/cbfabeb0-cd3c-e951-a572-19b365ed314d%40iki.fi
A PostgreSQL release tarball contains a number of prebuilt files, in
particular files produced by bison, flex, perl, and well as html and
man documentation. We have done this consistent with established
practice at the time to not require these tools for building from a
tarball. Some of these tools were hard to get, or get the right
version of, from time to time, and shipping the prebuilt output was a
convenience to users.
Now this has at least two problems:
One, we have to make the build system(s) work in two modes: Building
from a git checkout and building from a tarball. This is pretty
complicated, but it works so far for autoconf/make. It does not
currently work for meson; you can currently only build with meson from
a git checkout. Making meson builds work from a tarball seems very
difficult or impossible. One particular problem is that since meson
requires a separate build directory, we cannot make the build update
files like gram.h in the source tree. So if you were to build from a
tarball and update gram.y, you will have a gram.h in the source tree
and one in the build tree, but the way things work is that the
compiler will always use the one in the source tree. So you cannot,
for example, make any gram.y changes when building from a tarball.
This seems impossible to fix in a non-horrible way.
Second, there is increased interest nowadays in precisely tracking the
origin of software. We can reasonably track contributions into the
git tree, and users can reasonably track the path from a tarball to
packages and downloads and installs. But what happens between the git
tree and the tarball is obscure and in some cases non-reproducible.
The solution for both of these issues is to get rid of the step that
adds prebuilt files to the tarball. The tarball now only contains
what is in the git tree (*). Getting the additional build
dependencies is no longer a problem nowadays, and the complications to
keep these dual build modes working are significant. And of course we
want to get the meson build system working universally.
This commit removes the make distprep target altogether. The make
dist target continues to do its job, it just doesn't call distprep
anymore.
(*) - The tarball also contains the INSTALL file that is built at make
dist time, but not by distprep. This is unchanged for now.
The make maintainer-clean target, whose job it is to remove the
prebuilt files in addition to what make distclean does, is now just an
alias to make distprep. (In practice, it is probably obsolete given
that git clean is available.)
The following programs are now hard build requirements in configure
(they were already required by meson.build):
- bison
- flex
- perl
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/e07408d9-e5f2-d9fd-5672-f53354e9305e@eisentraut.org
Documentation says it cannot signal "a backend owned by a superuser".
On the contrary, it could signal background workers, including the
logical replication launcher. It could signal autovacuum workers and
the autovacuum launcher. Block all that. Signaling autovacuum workers
and those two launchers doesn't stall progress beyond what one could
achieve other ways. If a cluster uses a non-core extension with a
background worker that does not auto-restart, this could create a denial
of service with respect to that background worker. A background worker
with bugs in its code for responding to terminations or cancellations
could experience those bugs at a time the pg_signal_backend member
chooses. Back-patch to v11 (all supported versions).
Reviewed by Jelte Fennema-Nio. Reported by Hemanth Sandrana and
Mahendrakar Srinivasarao.
Security: CVE-2023-5870
Historically, the statistics of the checkpointer have been always part
of pg_stat_bgwriter. This commit removes a few columns from
pg_stat_bgwriter, and introduces pg_stat_checkpointer with equivalent,
renamed columns (plus a new one for the reset timestamp):
- checkpoints_timed -> num_timed
- checkpoints_req -> num_requested
- checkpoint_write_time -> write_time
- checkpoint_sync_time -> sync_time
- buffers_checkpoint -> buffers_written
The fields of PgStat_CheckpointerStats and its SQL functions are renamed
to match with the new field names, for consistency. Note that
background writer and checkpointer have been split into two different
processes in commits 806a2aee37 and bf405ba8e4. The pgstat
structures were already split, making this change straight-forward.
Bump catalog version.
Author: Bharath Rupireddy
Reviewed-by: Bertrand Drouvot, Andres Freund, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACVxX2ii=66RypXRweZe2EsBRiPMj0aHfRfHUeXJcC7kHg@mail.gmail.com
Since C99, there can be a trailing comma after the last value in an
enum definition. A lot of new code has been introducing this style on
the fly. Some new patches are now taking an inconsistent approach to
this. Some add the last comma on the fly if they add a new last
value, some are trying to preserve the existing style in each place,
some are even dropping the last comma if there was one. We could
nudge this all in a consistent direction if we just add the trailing
commas everywhere once.
I omitted a few places where there was a fixed "last" value that will
always stay last. I also skipped the header files of libpq and ecpg,
in case people want to use those with older compilers. There were
also a small number of cases where the enum type wasn't used anywhere
(but the enum values were), which ended up confusing pgindent a bit,
so I left those alone.
Discussion: https://www.postgresql.org/message-id/flat/386f8c45-c8ac-4681-8add-e3b0852c1620%40eisentraut.org
Enforce the rule from transam/README in XLogRegisterBuffer(), and
update callers to follow the rule.
Hash indexes sometimes register clean pages as a part of the locking
protocol, so provide a REGBUF_NO_CHANGE flag to support that use.
Discussion: https://postgr.es/m/c84114f8-c7f1-5b57-f85a-3adc31e1a904@iki.fi
Reviewed-by: Heikki Linnakangas
Instead of returning the number of characters in the RelFileNumber,
return the RelFileNumber itself. Continue to return the fork number,
as before, and additionally return the segment number.
parse_filename_for_nontemp_relation now rejects a RelFileNumber or
segment number that begins with a leading zero. Before, we accepted
such cases as relation filenames, but if we continued to do so after
this change, the function might return the same values for two
different files (e.g. 1234.5 and 001234.5 or 1234.005) which could be
annoying for callers. Since we don't actually ever generate filenames
with leading zeroes in the names, any such files that we find must
have been created by something other than PostgreSQL, and it is
therefore reasonable to treat them as non-relation files.
Along the way, change unlogged_relation_entry to store a RelFileNumber
rather than an OID. This update should have been made in
851f4cc75c, but it was overlooked.
It's trivial to make the update as part of this commit, perhaps more
trivial than it would have been without it, so do that.
Patch by me, reviewed by David Steele.
Discussion: http://postgr.es/m/CA+TgmoZNVeBzoqDL8xvr-nkaepq815jtDR4nJzPew7=3iEuM1g@mail.gmail.com
When min_dynamic_shared_memory is set above 0, we try to find space in a
pre-allocated region of the main shared memory area instead of calling
dsm_impl_XXX() routines to allocate more. The dsm_pin_segment() and
dsm_unpin_segment() routines had a bug: they called dsm_impl_XXX()
routines even for main region segments. Nobody noticed before now
because those routines do nothing on Unix, but on Windows they'd fail
while attempting to duplicate an invalid Windows HANDLE. Add the
missing gating.
Back-patch to 14, where commit 84b1c63a added this feature. Fixes
pgsql-bugs bug #18165.
Reported-by: Maxime Boyer <maxime.boyer@cra-arc.gc.ca>
Tested-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/18165-bf4f525cea6e51de%40postgresql.org
The SIGTERM handler for the startup process immediately calls
proc_exit() for the duration of the restore_command, i.e., a call
to system(). This system() call forks a new process to execute the
shell command, and this child process inherits the parent's signal
handlers. If both the parent and child processes receive SIGTERM,
both will attempt to call proc_exit(). This can end badly. For
example, both processes will try to remove themselves from the
PGPROC shared array.
To fix this problem, this commit adds a check in
StartupProcShutdownHandler() to see whether MyProcPid == getpid().
If they match, this is the parent process, and we can proc_exit()
like before. If they do not match, this is a child process, and we
just emit a message to STDERR (in a signal safe manner) and
_exit(), thereby skipping any problematic exit callbacks.
This commit also adds checks in proc_exit(), ProcKill(), and
AuxiliaryProcKill() that verify they are not being called within
such child processes.
Suggested-by: Andres Freund
Reviewed-by: Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/Y9nGDSgIm83FHcad%40paquier.xyz
Discussion: https://postgr.es/m/20230223231503.GA743455%40nathanxps13
Backpatch-through: 11
It is possible that the tail XID of pg_serial/ gets ahead of its head
XID, which would cause the truncation of pg_serial/ done during
checkpoints to show up as a "wraparound" LOG in SimpleLruTruncate(),
which is confusing. This also wastes a bit of disk space until the head
page is reclaimed again.
CheckPointPredicate() is changed so as the cutoff page for the
truncation is switched to the head page if the tail XID has advanced
beyond the head XID, rather than the tail page. This prevents the
confusing LOG message about a wraparound while allowing some truncation
to be done to cut in disk space.
This could be considered as a bug fix, but the original behavior is
harmless as well, resulting only in disk space temporarily wasted, so
no backpatch is done.
Author: Sami Imseih
Reviewed-by: Heikki Linnakangas, Michael Paquier
Discussion: https://postgr.es/m/755E19CA-D02C-4A4C-80D3-74F775410C48@amazon.com
This commit introduces trigger on login event, allowing to fire some actions
right on the user connection. This can be useful for logging or connection
check purposes as well as for some personalization of environment. Usage
details are described in the documentation included, but shortly usage is
the same as for other triggers: create function returning event_trigger and
then create event trigger on login event.
In order to prevent the connection time overhead when there are no triggers
the commit introduces pg_database.dathasloginevt flag, which indicates database
has active login triggers. This flag is set by CREATE/ALTER EVENT TRIGGER
command, and unset at connection time when no active triggers found.
Author: Konstantin Knizhnik, Mikhail Gribkov
Discussion: https://postgr.es/m/0d46d29f-4558-3af9-9c85-7774e14a7709%40postgrespro.ru
Reviewed-by: Pavel Stehule, Takayuki Tsunakawa, Greg Nancarrow, Ivan Panchenko
Reviewed-by: Daniel Gustafsson, Teodor Sigaev, Robert Haas, Andres Freund
Reviewed-by: Tom Lane, Andrey Sokolov, Zhihong Yu, Sergey Shinderuk
Reviewed-by: Gregory Stark, Nikita Malakhov, Ted Yu
* sync_method is renamed to wal_sync_method.
* sync_method_options[] is renamed to wal_sync_method_options[].
* assign_xlog_sync_method() is renamed to assign_wal_sync_method().
* The names of the available synchronization methods are now
prefixed with "WAL_SYNC_METHOD_" and have been moved into a
WalSyncMethod enum.
* PLATFORM_DEFAULT_SYNC_METHOD is renamed to
PLATFORM_DEFAULT_WAL_SYNC_METHOD, and DEFAULT_SYNC_METHOD is
renamed to DEFAULT_WAL_SYNC_METHOD.
These more descriptive names help distinguish the code for
wal_sync_method from the code for DataDirSyncMethod (e.g., the
recovery_init_sync_method configuration parameter and the
--sync-method option provided by several frontend utilities). This
change also prevents name collisions between the aforementioned
sets of code. Since this only improves the naming of internal
identifiers, there should be no behavior change.
Author: Maxim Orlov
Discussion: https://postgr.es/m/CACG%3DezbL1gwE7_K7sr9uqaCGkWhmvRTcTEnm3%2BX1xsRNwbXULQ%40mail.gmail.com
The WAIT_USE_WIN32 implementation of WaitEventSetWait() previously
reported at most one event per call, because that's what the underlying
WaitForMultipleObjects() call does.
We can make the behavior match the three Unix implementations by looping
until our output buffer is full, or there are no more events available
now. This makes no difference to most callers including the regular
FEBE socket code, since they ask for at most one event anyway. A
difference in socket accept priority might be perceived by end users
after commit 7389aad6 started using WaitEventSet in the postmaster.
With this commit, the accept order now matches Unix systems, servicing
listening sockets in round-robin order.
We decided it wasn't really a bug or worth back-patching, but it seems
good to align the behavior across platforms.
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier version)
Tested-by: "Wei Wang (Fujitsu)" <wangw.fnst@fujitsu.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2BA2dk29hr5zRP3HVJQ-_PncNJM6HVQ7aaYLXLRBZU-xw%40mail.gmail.com
We shouldn't be doing non-trivial work in signal handlers in general,
and in this case the handler could reach unsafe code and corrupt state.
It also clobbered its own "reason" code.
Move all recovery conflict decision logic into the next
CHECK_FOR_INTERRUPTS(), and have the signal handler just set flags and
the latch, following the standard pattern. Since there are several
different "reasons", use a separate flag for each.
With this refactoring, the recovery conflict system no longer
piggy-backs on top of the regular query cancelation mechanism, but
instead raises an error directly if it decides that is necessary. It
still needs to respect QueryCancelHoldoffCount, because otherwise the
FEBE protocol might get out of sync (see commit 2b3a8b20c2).
This fixes one class of intermittent failure in the new
031_recovery_conflict.pl test added by commit 9f8a050f, though the buggy
coding is much older. Failures outside contrived testing seem to be
very rare (or perhaps incorrectly attributed) in the field, based on
lack of reports.
No back-patch for now due to complexity and release schedule. We have
the option to back-patch into 16 later, as 16 has prerequisite commit
bea3d7e.
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier version)
Reviewed-by: Michael Paquier <michael@paquier.xyz> (earlier version)
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier version)
Tested-by: Christoph Berg <myon@debian.org>
Discussion: https://postgr.es/m/CA%2BhUKGK3PGKwcKqzoosamn36YW-fsuTdOPPF1i_rtEO%3DnEYKSg%40mail.gmail.com
Discussion: https://postgr.es/m/CALj2ACVr8au2J_9D88UfRCi0JdWhyQDDxAcSVav0B0irx9nXEg%40mail.gmail.com
This commit renames RecoveryInitSyncMethod to DataDirSyncMethod and
moves it to common/file_utils.h. This is preparatory work for a
follow-up commit that will allow specifying the synchronization
method in frontend utilities such as pg_upgrade and pg_basebackup.
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/ZN2ZB4afQ2JbR9TA%40paquier.xyz
