Just as backends must clean up their shared memory state (releasing
lwlocks, buffer pins, etc.) before exiting, they must also perform
any similar cleanups related to dynamic shared memory segments they
have mapped before unmapping those segments. So add a mechanism to
ensure that.
Existing on_shmem_exit hooks include both "user level" cleanup such
as transaction abort and removal of leftover temporary relations and
also "low level" cleanup that forcibly released leftover shared
memory resources. On-detach callbacks should run after the first
group but before the second group, so create a new before_shmem_exit
function for registering the early callbacks and keep on_shmem_exit
for the regular callbacks. (An earlier draft of this patch added an
additional argument to on_shmem_exit, but that had a much larger
footprint and probably a substantially higher risk of breaking third
party code for no real gain.)
Patch by me, reviewed by KaiGai Kohei and Andres Freund.
This prevents a possible longjmp out of the signal handler if a timeout
or SIGINT occurs while something within the handler has transiently set
ImmediateInterruptOK. For safety we must hold off the timeout or cancel
error until we're back in mainline, or at least till we reach the end of
the signal handler when ImmediateInterruptOK was true at entry. This
syncs these functions with the logic now present in handle_sig_alarm.
AFAICT there is no live bug here in 9.0 and up, because I don't think we
currently can wait for any heavyweight lock inside these functions, and
there is no other code (except read-from-client) that will turn on
ImmediateInterruptOK. However, that was not true pre-9.0: in older
branches ProcessIncomingNotify might block trying to lock pg_listener, and
then a SIGINT could lead to undesirable control flow. It might be all
right anyway given the relatively narrow code ranges in which NOTIFY
interrupts are enabled, but for safety's sake I'm back-patching this.
These bugs can cause data loss on standbys started with hot_standby=on at
the moment they start to accept read only queries, by marking committed
transactions as uncommited. The likelihood of such corruptions is small
unless the primary has a high transaction rate.
5a031a5556 fixed bugs in HS's startup logic
by maintaining less state until at least STANDBY_SNAPSHOT_PENDING state
was reached, missing the fact that both clog and subtrans are written to
before that. This only failed to fail in common cases because the usage
of ExtendCLOG in procarray.c was superflous since clog extensions are
actually WAL logged.
f44eedc3f0f347a856eea8590730769125964597/I then tried to fix the missing
extensions of pg_subtrans due to the former commit's changes - which are
not WAL logged - by performing the extensions when switching to a state
> STANDBY_INITIALIZED and not performing xid assignments before that -
again missing the fact that ExtendCLOG is unneccessary - but screwed up
twice: Once because latestObservedXid wasn't updated anymore in that
state due to the earlier commit and once by having an off-by-one error in
the loop performing extensions. This means that whenever a
CLOG_XACTS_PER_PAGE (32768 with default settings) boundary was crossed
between the start of the checkpoint recovery started from and the first
xl_running_xact record old transactions commit bits in pg_clog could be
overwritten if they started and committed in that window.
Fix this mess by not performing ExtendCLOG() in HS at all anymore since
it's unneeded and evidently dangerous and by performing subtrans
extensions even before reaching STANDBY_SNAPSHOT_PENDING.
Analysis and patch by Andres Freund. Reported by Christophe Pettus.
Backpatch down to 9.0, like the previous commit that caused this.
Apparently, shifts greater than or equal to the width of the type
are undefined, and can surprisingly produce a non-zero value.
Amit Kapila, with a comment by me.
To wit,
bgworker.c: In function `RegisterDynamicBackgroundWorker':
bgworker.c:761: warning: `generation' might be used uninitialized in this function
dsm_impl.c: In function `dsm_impl_op':
dsm_impl.c:197: warning: control reaches end of non-void function
Neither of these represent actual bugs, but we may as well tweak the code
so that more compilers can tell that. This won't change the generated code
on compilers that do recognize that the cases are unreachable.
Using the infrastructure provided by this patch, it's possible either
to wait for the startup of a dynamically-registered background worker,
or to poll the status of such a worker without waiting. In either
case, the current PID of the worker process can also be obtained.
As usual, worker_spi is updated to demonstrate the new functionality.
Patch by me. Review by Andres Freund.
There is a new API, RegisterDynamicBackgroundWorker, which allows
an ordinary user backend to register a new background writer during
normal running. This means that it's no longer necessary for all
background workers to be registered during processing of
shared_preload_libraries, although the option of registering workers
at that time remains available.
When a background worker exits and will not be restarted, the
slot previously used by that background worker is automatically
released and becomes available for reuse. Slots used by background
workers that are configured for automatic restart can't (yet) be
released without shutting down the system.
This commit adds a new source file, bgworker.c, and moves some
of the existing control logic for background workers there.
Previously, there was little enough logic that it made sense to
keep everything in postmaster.c, but not any more.
This commit also makes the worker_spi contrib module into an
extension and adds a new function, worker_spi_launch, which can
be used to demonstrate the new facility.
In some cases with higher numbers of subtransactions
it was possible for us to incorrectly initialize
subtrans leading to complaints of missing pages.
Bug report by Sergey Konoplev
Analysis and fix by Andres Freund
Since commit f21bb9cfb5, this function
ignores the caller-provided length and loops until it finds a
terminator, which GetVirtualXIDsDelayingChkpt() never adds. Restore the
previous loop control logic. In passing, revert the addition of an
unused variable by the same commit, presumably a debugging relic.
The array allocated by GetRunningTransactionLocks() needs to be pfree'd
when we're done with it. Otherwise we leak some memory during each
checkpoint, if wal_level = hot_standby. This manifests as memory bloat
in the checkpointer process, or in bgwriter in versions before we made
the checkpointer separate.
Reported and fixed by Naoya Anzai. Back-patch to 9.0 where the issue
was introduced.
In passing, improve comments for GetRunningTransactionLocks(), and add
an Assert that we didn't overrun the palloc'd array.
This GUC allows limiting the time spent waiting to acquire any one
heavyweight lock.
In support of this, improve the recently-added timeout infrastructure
to permit efficiently enabling or disabling multiple timeouts at once.
That reduces the performance hit from turning on lock_timeout, though
it's still not zero.
Zoltán Böszörményi, reviewed by Tom Lane,
Stephen Frost, and Hari Babu
Rename PGXACT->inCommit flag into delayChkpt flag,
and generalise comments to allow use in other situations,
such as the forthcoming potential use in checksum patch.
Replace wait loop to look for VXIDs with delayChkpt set.
No user visible changes, not behaviour changes at present.
Simon Riggs, reviewed and rebased by Jeff Davis
This reverts commit c11130690d in favor of
actually fixing the problem: namely, that we should never have been
modifying the checkpoint record's nextXid at this point to begin with.
The nextXid should match the state as of the checkpoint's logical WAL
position (ie the redo point), not the state as of its physical position.
It's especially bogus to advance it in some wal_levels and not others.
In any case there is no need for the checkpoint record to carry the
same nextXid shown in the XLOG_RUNNING_XACTS record just emitted by
LogStandbySnapshot, as any replay operation will already have adopted
that value as current.
This fixes bug #7710 from Tarvi Pillessaar, and probably also explains bug
#6291 from Daniel Farina, in that if a checkpoint were in progress at the
instant of XID wraparound, the epoch bump would be lost as reported.
(And, of course, these days there's at least a 50-50 chance of a checkpoint
being in progress at any given instant.)
Diagnosed by me and independently by Andres Freund. Back-patch to all
branches supporting hot standby.
Previously we stored all xids mixed together.
Now we store top-level xids first, followed
by all subxids. Also skip logging any subxids
if the snapshot is suboverflowed, since there
are potentially large numbers of them and they
are not useful in that case anyway. Has value
in the envisaged design for decoding of WAL.
No planned effect on Hot Standby.
Andres Freund, reviewed by me
Move discussion of why our algorithm for taking snapshots in recovery
to a more appropriate location in the function, and delete incorrect
mention of taking a lock.
mdinit() was misusing IsBootstrapProcessingMode() to decide whether to
create an fsync pending-operations table in the current process. This led
to creating a table not only in the startup and checkpointer processes as
intended, but also in the bgwriter process, not to mention other auxiliary
processes such as walwriter and walreceiver. Creation of the table in the
bgwriter is fatal, because it absorbs fsync requests that should have gone
to the checkpointer; instead they just sit in bgwriter local memory and are
never acted on. So writes performed by the bgwriter were not being fsync'd
which could result in data loss after an OS crash. I think there is no
live bug with respect to walwriter and walreceiver because those never
perform any writes of shared buffers; but the potential is there for
future breakage in those processes too.
To fix, make AuxiliaryProcessMain() export the current process's
AuxProcType as a global variable, and then make mdinit() test directly for
the types of aux process that should have a pendingOpsTable. Having done
that, we might as well also get rid of the random bool flags such as
am_walreceiver that some of the aux processes had grown. (Note that we
could not have fixed the bug by examining those variables in mdinit(),
because it's called from BaseInit() which is run by AuxiliaryProcessMain()
before entering any of the process-type-specific code.)
Back-patch to 9.2, where the problem was introduced by the split-up of
bgwriter and checkpointer processes. The bogus pendingOpsTable exists
in walwriter and walreceiver processes in earlier branches, but absent
any evidence that it causes actual problems there, I'll leave the older
branches alone.
Management of timeouts was getting a little cumbersome; what we
originally had was more than enough back when we were only concerned
about deadlocks and query cancel; however, when we added timeouts for
standby processes, the code got considerably messier. Since there are
plans to add more complex timeouts, this seems a good time to introduce
a central timeout handling module.
External modules register their timeout handlers during process
initialization, and later enable and disable them as they see fit using
a simple API; timeout.c is in charge of keeping track of which timeouts
are in effect at any time, installing a common SIGALRM signal handler,
and calling setitimer() as appropriate to ensure timely firing of
external handlers.
timeout.c additionally supports pluggable modules to add their own
timeouts, though this capability isn't exercised anywhere yet.
Additionally, as of this commit, walsender processes are aware of
timeouts; we had a preexisting bug there that made those ignore SIGALRM,
thus being subject to unhandled deadlocks, particularly during the
authentication phase. This has already been fixed in back branches in
commit 0bf8eb2a, which see for more details.
Main author: Zoltán Böszörményi
Some review and cleanup by Álvaro Herrera
Extensive reworking by Tom Lane
This simplifies code that needs to do arithmetic on XLogRecPtrs.
To avoid changing on-disk format of data pages, the LSN on data pages is
still stored in the old format. That should keep pg_upgrade happy. However,
we have XLogRecPtrs embedded in the control file, and in the structs that
are sent over the replication protocol, so this changes breaks compatibility
of pg_basebackup and server. I didn't do anything about this in this patch,
per discussion on -hackers, the right thing to do would to be to change the
replication protocol to be architecture-independent, so that you could use
a newer version of pg_receivexlog, for example, against an older server
version.
When HS startup is deferred because of overflowed subtransactions, ensure
that we re-initialize KnownAssignedXids for when both existing and incoming
snapshots have non-zero qualifying xids.
Fixes bug #6661 reported by Valentine Gogichashvili.
Analysis and fix by Andres Freund
When the "hot" members of PGPROC were split off to separate PGXACT structs,
many PGPROC fields referred to in comments were moved to PGXACT, but the
comments were neglected in the commit. Mostly this is just a search/replace
of PGPROC with PGXACT, but the way the dummy PGPROC entries are created for
prepared transactions changed more, making some of the comments totally
bogus.
Noah Misch
Originally, most of this code assumed that no Postgres backends could be
running concurrently with it, and so no locking could be needed. That
assumption fails in Hot Standby. While it's still true that Hot Standby
backends should never change values like nextXid, they can examine them,
and consistency is important in some cases such as when computing a
snapshot. Therefore, prudence requires that WAL replay code obtain the
relevant locks when modifying such variables, even though it can examine
them without taking a lock. We were following that coding rule in some
places but not all. This commit applies the coding rule uniformly to all
updates of ShmemVariableCache and MultiXactState fields; a search of the
replay routines did not find any other cases that seemed to be at risk.
In addition, this commit fixes a longstanding thinko in replay of NEXTOID
and checkpoint records: we tried to advance nextOid only if it was behind
the value in the WAL record, but the comparison would draw the wrong
conclusion if OID wraparound had occurred since the previous value.
Better to just unconditionally assign the new value, since OID assignment
shouldn't be happening during replay anyway.
The additional locking seems to be more in the nature of future-proofing
than fixing any live bug, so I am not going to back-patch it. The NEXTOID
fix will be back-patched separately.
All other WAL redo routines either call RestoreBkpBlocks() or Assert that
they haven't been passed any backup blocks. Make this one do likewise.
Also, fix incorrect routine name in its failure message.
We log AccessExclusiveLocks for replay onto standby nodes,
but because of timing issues on ProcArray it is possible to
log a lock that is still held by a just committed transaction
that is very soon to be removed. To avoid any timing issue we
avoid applying locks made by transactions with InvalidXid.
Simon Riggs, bug report Tom Lane, diagnosis Pavan Deolasee
All supported platforms support the C89 standard function atexit()
(SunOS 4 probably being the last one not to), and supporting both
makes the code clumsy.
Heikki Linnakangas had the idea of rearranging GetSnapshotData to
avoid checking for sub-XIDs when no top-level XID is present. This
patch does that plus further a bit of further, related rearrangement.
Benchmarking show a significant improvement on unlogged tables at
higher concurrency levels, and mostly indifferent result on permanent
tables (which are presumably bottlenecked elsewhere). Most of the
benefit seems to come from using the new NormalTransactionIdPrecedes()
macro rather than the function call TransactionIdPrecedes().
