Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Previously, it was unsafe to execute a plan in parallel if
ExecutorRun() might be called with a non-zero row count. However,
it's quite easy to fix things up so that we can support that case,
provided that it is known that we will never call ExecutorRun() a
second time for the same QueryDesc. Add infrastructure to signal
this, and cross-checks to make sure that a caller who claims this is
true doesn't later reneg.
While that pattern never happens with queries received directly from a
client -- there's no way to know whether multiple Execute messages
will be sent unless the first one requests all the rows -- it's pretty
common for queries originating from procedural languages, which often
limit the result to a single tuple or to a user-specified number of
tuples.
This commit doesn't actually enable parallelism in any additional
cases, because currently none of the places that would be able to
benefit from this infrastructure pass CURSOR_OPT_PARALLEL_OK in the
first place, but it makes it much more palatable to pass
CURSOR_OPT_PARALLEL_OK in places where we currently don't, because it
eliminates some cases where we'd end up having to run the parallel
plan serially.
Patch by me, based on some ideas from Rafia Sabih and corrected by
Rafia Sabih based on feedback from Dilip Kumar and myself.
Discussion: http://postgr.es/m/CA+TgmobXEhvHbJtWDuPZM9bVSLiTj-kShxQJ2uM5GPDze9fRYA@mail.gmail.com
This patch widens SPI_processed, EState's es_processed field, PortalData's
portalPos field, FuncCallContext's call_cntr and max_calls fields,
ExecutorRun's count argument, PortalRunFetch's result, and the max number
of rows in a SPITupleTable to uint64, and deals with (I hope) all the
ensuing fallout. Some of these values were declared uint32 before, and
others "long".
I also removed PortalData's posOverflow field, since that logic seems
pretty useless given that portalPos is now always 64 bits.
The user-visible results are that command tags for SELECT etc will
correctly report tuple counts larger than 4G, as will plpgsql's GET
GET DIAGNOSTICS ... ROW_COUNT command. Queries processing more tuples
than that are still not exactly the norm, but they're becoming more
common.
Most values associated with FETCH/MOVE distances, such as PortalRun's count
argument and the count argument of most SPI functions that have one, remain
declared as "long". It's not clear whether it would be worth promoting
those to int64; but it would definitely be a large dollop of additional
API churn on top of this, and it would only help 32-bit platforms which
seem relatively less likely to see any benefit.
Andreas Scherbaum, reviewed by Christian Ullrich, additional hacking by me
This reverts commit d573e239f0, "Take fewer
snapshots". While that seemed like a good idea at the time, it caused
execution to use a snapshot that had been acquired before locking any of
the tables mentioned in the query. This created user-visible anomalies
that were not present in any prior release of Postgres, as reported by
Tomas Vondra. While this whole area could do with a redesign (since there
are related cases that have anomalies anyway), it doesn't seem likely that
any future patch would be reasonably back-patchable; and we don't want 9.2
to exhibit a behavior that's subtly unlike either past or future releases.
Hence, revert to prior code while we rethink the problem.
Making this operation look like a utility statement seems generally a good
idea, and particularly so in light of the desire to provide command
triggers for utility statements. The original choice of representing it as
SELECT with an IntoClause appendage had metastasized into rather a lot of
places, unfortunately, so that this patch is a great deal more complicated
than one might at first expect.
In particular, keeping EXPLAIN working for SELECT INTO and CREATE TABLE AS
subcommands required restructuring some EXPLAIN-related APIs. Add-on code
that calls ExplainOnePlan or ExplainOneUtility, or uses
ExplainOneQuery_hook, will need adjustment.
Also, the cases PREPARE ... SELECT INTO and CREATE RULE ... SELECT INTO,
which formerly were accepted though undocumented, are no longer accepted.
The PREPARE case can be replaced with use of CREATE TABLE AS EXECUTE.
The CREATE RULE case doesn't seem to have much real-world use (since the
rule would work only once before failing with "table already exists"),
so we'll not bother with that one.
Both SELECT INTO and CREATE TABLE AS still return a command tag of
"SELECT nnnn". There was some discussion of returning "CREATE TABLE nnnn",
but for the moment backwards compatibility wins the day.
Andres Freund and Tom Lane
When a PORTAL_ONE_SELECT query is executed, we can opportunistically
reuse the parse/plan shot for the execution phase. This cuts down the
number of snapshots per simple query from 2 to 1 for the simple
protocol, and 3 to 2 for the extended protocol. Since we are only
reusing a snapshot taken early in the processing of the same protocol
message, the change shouldn't be user-visible, except that the remote
possibility of the planning and execution snapshots being different is
eliminated.
Note that this change does not make it safe to assume that the parse/plan
snapshot will certainly be reused; that will currently only happen if
PortalStart() decides to use the PORTAL_ONE_SELECT strategy. It might
be worth trying to provide some stronger guarantees here in the future,
but for now we don't.
Patch by me; review by Dimitri Fontaine.
walsender.h should depend on xlog.h, not vice versa. (Actually, the
inclusion was circular until a couple hours ago, which was even sillier;
but Bruce broke it in the expedient rather than logically correct
direction.) Because of that poor decision, plus blind application of
pgrminclude, we had a situation where half the system was depending on
xlog.h to include such unrelated stuff as array.h and guc.h. Clean up
the header inclusion, and manually revert a lot of what pgrminclude had
done so things build again.
This episode reinforces my feeling that pgrminclude should not be run
without adult supervision. Inclusion changes in header files in particular
need to be reviewed with great care. More generally, it'd be good if we
had a clearer notion of module layering to dictate which headers can sanely
include which others ... but that's a big task for another day.
module and teach PREPARE and protocol-level prepared statements to use it.
In service of this, rearrange utility-statement processing so that parse
analysis does not assume table schemas can't change before execution for
utility statements (necessary because we don't attempt to re-acquire locks
for utility statements when reusing a stored plan). This requires some
refactoring of the ProcessUtility API, but it ends up cleaner anyway,
for instance we can get rid of the QueryContext global.
Still to do: fix up SPI and related code to use the plan cache; I'm tempted to
try to make SQL functions use it too. Also, there are at least some aspects
of system state that we want to ensure remain the same during a replan as in
the original processing; search_path certainly ought to behave that way for
instance, and perhaps there are others.
storing mostly-redundant Query trees in prepared statements, portals, etc.
To replace Query, a new node type called PlannedStmt is inserted by the
planner at the top of a completed plan tree; this carries just the fields of
Query that are still needed at runtime. The statement lists kept in portals
etc. now consist of intermixed PlannedStmt and bare utility-statement nodes
--- no Query. This incidentally allows us to remove some fields from Query
and Plan nodes that shouldn't have been there in the first place.
Still to do: simplify the execution-time range table; at the moment the
range table passed to the executor still contains Query trees for subqueries.
initdb forced due to change of stored rules.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
mode see a fresh snapshot for each command in the function, rather than
using the latest interactive command's snapshot. Also, suppress fresh
snapshots as well as CommandCounterIncrement inside STABLE and IMMUTABLE
functions, instead using the snapshot taken for the most closely nested
regular query. (This behavior is only sane for read-only functions, so
the patch also enforces that such functions contain only SELECT commands.)
As per my proposal of 6-Sep-2004; I note that I floated essentially the
same proposal on 19-Jun-2002, but that discussion tailed off without any
action. Since 8.0 seems like the right place to be taking possibly
nontrivial backwards compatibility hits, let's get it done now.
handle multiple 'formats' for data I/O. Restructure CommandDest and
DestReceiver stuff one more time (it's finally starting to look a bit
clean though). Code now matches latest 3.0 protocol document as far
as message formats go --- but there is no support for binary I/O yet.
DestReceiver pointers instead of just CommandDest values. The DestReceiver
is made at the point where the destination is selected, rather than
deep inside the executor. This cleans up the original kluge implementation
of tstoreReceiver.c, and makes it easy to support retrieving results
from utility statements inside portals. Thus, you can now do fun things
like Bind and Execute a FETCH or EXPLAIN command, and it'll all work
as expected (e.g., you can Describe the portal, or use Execute's count
parameter to suspend the output partway through). Implementation involves
stuffing the utility command's output into a Tuplestore, which would be
kind of annoying for huge output sets, but should be quite acceptable
for typical uses of utility commands.
Both plannable queries and utility commands are now always executed
within Portals, which have been revamped so that they can handle the
load (they used to be good only for single SELECT queries). Restructure
code to push command-completion-tag selection logic out of postgres.c,
so that it won't have to be duplicated between simple and extended queries.
initdb forced due to addition of a field to Query nodes.
utility statement (DeclareCursorStmt) with a SELECT query dangling from
it, rather than a SELECT query with a few unusual fields in it. Add
code to determine whether a planned query can safely be run backwards.
If DECLARE CURSOR specifies SCROLL, ensure that the plan can be run
backwards by adding a Materialize plan node if it can't. Without SCROLL,
you get an error if you try to fetch backwards from a cursor that can't
handle it. (There is still some discussion about what the exact
behavior should be, but this is necessary infrastructure in any case.)
Along the way, make EXPLAIN DECLARE CURSOR work.
to plan nodes, not vice-versa. All executor state nodes now inherit from
struct PlanState. Copying of plan trees has been simplified by not
storing a list of SubPlans in Plan nodes (eliminating duplicate links).
The executor still needs such a list, but it can build it during
ExecutorStart since it has to scan the plan tree anyway.
No initdb forced since no stored-on-disk structures changed, but you
will need a full recompile because of node-numbering changes.
report for each received SQL command, regardless of rewriting activity.
Also ensure that this report comes from the 'original' command, not the
last command generated by rewrite; this fixes 7.2 breakage for INSERT
commands that have actions added by rules. Fernando Nasser and Tom Lane.
for details). It doesn't really do that much yet, since there are no
short-term memory contexts in the executor, but the infrastructure is
in place and long-term contexts are handled reasonably. A few long-
standing bugs have been fixed, such as 'VACUUM; anything' in a single
query string crashing. Also, out-of-memory is now considered a
recoverable ERROR, not FATAL.
Eliminate a large amount of crufty, now-dead code in and around
memory management.
Fix problem with holding off SIGTRAP, SIGSEGV, etc in postmaster and
backend startup.
