Previously we were piggybacking on transaction ID parameters to freeze
multixacts; but since there isn't necessarily any relationship between
rates of Xid and multixact consumption, this turns out not to be a good
idea.
Therefore, we now have multixact-specific freezing parameters:
vacuum_multixact_freeze_min_age: when to remove multis as we come across
them in vacuum (default to 5 million, i.e. early in comparison to Xid's
default of 50 million)
vacuum_multixact_freeze_table_age: when to force whole-table scans
instead of scanning only the pages marked as not all visible in
visibility map (default to 150 million, same as for Xids). Whichever of
both which reaches the 150 million mark earlier will cause a whole-table
scan.
autovacuum_multixact_freeze_max_age: when for cause emergency,
uninterruptible whole-table scans (default to 400 million, double as
that for Xids). This means there shouldn't be more frequent emergency
vacuuming than previously, unless multixacts are being used very
rapidly.
Backpatch to 9.3 where multixacts were made to persist enough to require
freezing. To avoid an ABI break in 9.3, VacuumStmt has a couple of
fields in an unnatural place, and StdRdOptions is split in two so that
the newly added fields can go at the end.
Patch by me, reviewed by Robert Haas, with additional input from Andres
Freund and Tom Lane.
We used the length of the input string, not the de-escaped string, as
the trigger for NAMEDATALEN truncation. AFAICS this would only result
in sometimes printing a phony truncation warning; but it's just luck
that there was no worse problem, since we were violating the API spec
for truncate_identifier(). Per bug #9204 from Joshua Yanovski.
This has been wrong since the Unicode-identifier support was added,
so back-patch to all supported branches.
Commit a5ff502fceadc7c203b0d7a11b45c73f1b421f69 was a brick shy of a load
in the backend lexer too, not just psql. Per further testing of bug #9068.
In passing, improve related comments.
Add the ability to specify the objects to move by who those objects are
owned by (as relowner) and change ALL to mean ALL objects. This
makes the command always operate against a well-defined set of objects
and not have the objects-to-be-moved based on the role of the user
running the command.
Per discussion with Simon and Tom.
Some cases were still reporting errors and aborting, instead of a NOTICE
that the object was being skipped. This makes it more difficult to
cleanly handle pg_dump --clean, so change that to instead skip missing
objects properly.
Per bug #7873 reported by Dave Rolsky; apparently this affects a large
number of users.
Authors: Pavel Stehule and Dean Rasheed. Some tweaks by Álvaro Herrera
A while back, 2c92edad48796119c83d7dbe6c33425d1924626d allowed
type_func_name_keywords to be used in more places, including role
identifiers. Unfortunately, that commit missed out on cases where
name_list was used for lists-of-roles, eg: for DROP ROLE. This
resulted in the unfortunate situation that you could CREATE a role
with a type_func_name_keywords-allowed identifier, but not DROP it
(directly- ALTER could be used to rename it to something which
could be DROP'd).
This extends allowing type_func_name_keywords to places where role
lists can be used.
Back-patch to 9.0, as 2c92edad48796119c83d7dbe6c33425d1924626d was.
All these constructs generate parse trees consisting of a Const and
a run-time type coercion (perhaps a FuncExpr or a CoerceViaIO). Modify
the raw parse output so that we end up with the original token's location
attached to the type coercion node while the Const has location -1;
before, it was the other way around. This makes no difference in terms
of what exprLocation() will say about the parse tree as a whole, so it
should not have any user-visible impact. The point of changing it is that
we do not want contrib/pg_stat_statements to treat these constructs as
replaceable constants. It will do the right thing if the Const has
location -1 rather than a valid location.
This is a pretty ugly hack, but then this code is ugly already; we should
someday replace this translation with special-purpose parse node(s) that
would allow ruleutils.c to reconstruct the original query text.
(See also commit 5d3fcc4c2e137417ef470d604fee5e452b22f6a7, which also
hacked location assignment rules for the benefit of pg_stat_statements.)
Back-patch to 9.2 where pg_stat_statements grew the ability to recognize
replaceable constants.
Kyotaro Horiguchi
Tablespaces have a few options which can be set on them to give PG hints
as to how the tablespace behaves (perhaps it's faster for sequential
scans, or better able to handle random access, etc). These options were
only available through the ALTER TABLESPACE command.
This adds the ability to set these options at CREATE TABLESPACE time,
removing the need to do both a CREATE TABLESPACE and ALTER TABLESPACE to
get the correct options set on the tablespace.
Vik Fearing, reviewed by Michael Paquier.
This adds a 'MOVE' sub-command to ALTER TABLESPACE which allows moving sets of
objects from one tablespace to another. This can be extremely handy and avoids
a lot of error-prone scripting. ALTER TABLESPACE ... MOVE will only move
objects the user owns, will notify the user if no objects were found, and can
be used to move ALL objects or specific types of objects (TABLES, INDEXES, or
MATERIALIZED VIEWS).
On second thought, commit 0c051c90082da0b7e5bcaf9aabcbd4f361137cdc was
over-hasty: rather than allowing this case, we ought to reject it for now.
That leaves the field clear for a future feature that allows the target
table to be re-specified in the FROM (or USING) clause, which will enable
left-joining the target table to something else. We can then also allow
LATERAL references to such an explicitly re-specified target table.
But allowing them right now will create ambiguities or worse for such a
feature, and it isn't something we documented 9.3 as supporting.
While at it, add a convenience subroutine to avoid having several copies
of the ereport for disalllowed-LATERAL-reference cases.
I failed to think much about UPDATE/DELETE when implementing LATERAL :-(.
The implemented behavior ended up being that subqueries in the FROM or
USING clause (respectively) could access the update/delete target table as
though it were a lateral reference; which seems fine if they said LATERAL,
but certainly ought to draw an error if they didn't. Fix it so you get a
suitable error when you omit LATERAL. Per report from Emre Hasegeli.
Overly compact coding in makeOrderedSetArgs() led to a platform dependency:
if the compiler chose to execute the subexpressions in the wrong order,
list_length() might get applied to an already-modified List, giving a
value we didn't want. Per buildfarm.
This patch introduces generic support for ordered-set and hypothetical-set
aggregate functions, as well as implementations of the instances defined in
SQL:2008 (percentile_cont(), percentile_disc(), rank(), dense_rank(),
percent_rank(), cume_dist()). We also added mode() though it is not in the
spec, as well as versions of percentile_cont() and percentile_disc() that
can compute multiple percentile values in one pass over the data.
Unlike the original submission, this patch puts full control of the sorting
process in the hands of the aggregate's support functions. To allow the
support functions to find out how they're supposed to sort, a new API
function AggGetAggref() is added to nodeAgg.c. This allows retrieval of
the aggregate call's Aggref node, which may have other uses beyond the
immediate need. There is also support for ordered-set aggregates to
install cleanup callback functions, so that they can be sure that
infrastructure such as tuplesort objects gets cleaned up.
In passing, make some fixes in the recently-added support for variadic
aggregates, and make some editorial adjustments in the recent FILTER
additions for aggregates. Also, simplify use of IsBinaryCoercible() by
allowing it to succeed whenever the target type is ANY or ANYELEMENT.
It was inconsistent that it dealt with other polymorphic target types
but not these.
Atri Sharma and Andrew Gierth; reviewed by Pavel Stehule and Vik Fearing,
and rather heavily editorialized upon by Tom Lane
This fixes a problem noted as a followup to bug #8648: if a query has a
semantically-empty target list, e.g. SELECT * FROM zero_column_table,
ruleutils.c will dump it as a syntactically-empty target list, which was
not allowed. There doesn't seem to be any reliable way to fix this by
hacking ruleutils (note in particular that the originally zero-column table
might since have had columns added to it); and even if we had such a fix,
it would do nothing for existing dump files that might contain bad syntax.
The best bet seems to be to relax the syntactic restriction.
Also, add parse-analysis errors for SELECT DISTINCT with no columns (after
*-expansion) and RETURNING with no columns. These cases previously
produced unexpected behavior because the parsed Query looked like it had
no DISTINCT or RETURNING clause, respectively. If anyone ever offers
a plausible use-case for this, we could work a bit harder on making the
situation distinguishable.
Arguably this is a bug fix that should be back-patched, but I'm worried
that there may be client apps or PLs that expect "SELECT ;" to throw a
syntax error. The issue doesn't seem important enough to risk changing
behavior in minor releases.
SQL-standard TABLE() is a subset of UNNEST(); they deal with arrays and
other collection types. This feature, however, deals with set-returning
functions. Use a different syntax for this feature to keep open the
possibility of implementing the standard TABLE().
The previous coding labeled expressions such as pg_index.indkey[1:3] as
being of int2vector type; which is not right because the subscript bounds
of such a result don't, in general, satisfy the restrictions of int2vector.
To fix, implicitly promote the result of slicing int2vector to int2[],
or oidvector to oid[]. This is similar to what we've done with domains
over arrays, which is a good analogy because these types are very much
like restricted domains of the corresponding regular-array types.
A side-effect is that we now also forbid array-element updates on such
columns, eg while "update pg_index set indkey[4] = 42" would have worked
before if you were superuser (and corrupted your catalogs irretrievably,
no doubt) it's now disallowed. This seems like a good thing since, again,
some choices of subscripting would've led to results not satisfying the
restrictions of int2vector. The case of an array-slice update was
rejected before, though with a different error message than you get now.
We could make these cases work in future if we added a cast from int2[]
to int2vector (with a cast function checking the subscript restrictions)
but it seems unlikely that there's any value in that.
Per report from Ronan Dunklau. Back-patch to all supported branches
because of the crash risks involved.
This patch adds the ability to write TABLE( function1(), function2(), ...)
as a single FROM-clause entry. The result is the concatenation of the
first row from each function, followed by the second row from each
function, etc; with NULLs inserted if any function produces fewer rows than
others. This is believed to be a much more useful behavior than what
Postgres currently does with multiple SRFs in a SELECT list.
This syntax also provides a reasonable way to combine use of column
definition lists with WITH ORDINALITY: put the column definition list
inside TABLE(), where it's clear that it doesn't control the ordinality
column as well.
Also implement SQL-compliant multiple-argument UNNEST(), by turning
UNNEST(a,b,c) into TABLE(unnest(a), unnest(b), unnest(c)).
The SQL standard specifies TABLE() with only a single function, not
multiple functions, and it seems to require an implicit UNNEST() which is
not what this patch does. There may be something wrong with that reading
of the spec, though, because if it's right then the spec's TABLE() is just
a pointless alternative spelling of UNNEST(). After further review of
that, we might choose to adopt a different syntax for what this patch does,
but in any case this functionality seems clearly worthwhile.
Andrew Gierth, reviewed by Zoltán Böszörményi and Heikki Linnakangas, and
significantly revised by me
Although the SQL spec forbids duplicate table aliases, historically
we've allowed queries like
SELECT ... FROM tab1 x CROSS JOIN (tab2 x CROSS JOIN tab3 y) z
on the grounds that the aliased join (z) hides the aliases within it,
therefore there is no conflict between the two RTEs named "x". The
LATERAL patch broke this, on the misguided basis that "x" could be
ambiguous if tab3 were a LATERAL subquery. To avoid breaking existing
queries, it's better to allow this situation and complain only if
tab3 actually does contain an ambiguous reference. We need only remove
the check that was throwing an error, because the column lookup code
is already prepared to handle ambiguous references. Per bug #8444.
Pending patches for logical replication will use this to determine
which columns of a tuple ought to be considered as its candidate key.
Andres Freund, with minor, mostly cosmetic adjustments by me
These things didn't work because the planner omitted to do the necessary
preprocessing of a WindowFunc's argument list. Add the few dozen lines
of code needed to handle that.
Although this sounds like a feature addition, it's really a bug fix because
the default-argument case was likely to crash previously, due to lack of
checking of the number of supplied arguments in the built-in window
functions. It's not a security issue because there's no way for a
non-superuser to create a window function definition with defaults that
refers to a built-in C function, but nonetheless people might be annoyed
that it crashes rather than producing a useful error message. So
back-patch as far as the patch applies easily, which turns out to be 9.2.
I'll put a band-aid in earlier versions as a separate patch.
(Note that these features still don't work for aggregates, and fixing that
case will be harder since we represent aggregate arg lists as target lists
not bare expression lists. There's no crash risk though because CREATE
AGGREGATE doesn't accept defaults, and we reject named-argument notation
when parsing an aggregate call.)
For rather inscrutable reasons, SQL:2008 disallows copying-and-modifying a
window definition that has any explicit framing clause. The error message
we gave for this only made sense if the referencing window definition
itself contains an explicit framing clause, which it might well not.
Moreover, in the context of an OVER clause it's not exactly obvious that
"OVER (windowname)" implies copy-and-modify while "OVER windowname" does
not. This has led to multiple complaints, eg bug #5199 from Iliya
Krapchatov. Change to a hopefully more intelligible error message, and
in the case where we have just "OVER (windowname)", add a HINT suggesting
that omitting the parentheses will fix it. Also improve the related
documentation. Back-patch to all supported branches.
Add asprintf(), pg_asprintf(), and psprintf() to simplify string
allocation and composition. Replacement implementations taken from
NetBSD.
Reviewed-by: Álvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Asif Naeem <anaeem.it@gmail.com>
DISCARD ALL will now discard cached sequence information, as well.
Fabrízio de Royes Mello, reviewed by Zoltán Böszörményi, with some
further tweaks by me.
Previously, arbitray system columns could be mentioned in table
constraints, but they were not correctly checked at runtime, because
the values weren't actually set correctly in the tuple. Since it
seems easy enough to initialize the table OID properly, do that,
and continue allowing that column, but disallow the rest unless and
until someone figures out a way to make them work properly.
No back-patch, because this doesn't seem important enough to take the
risk of destabilizing the back branches. In fact, this will pose a
dump-and-reload hazard for those upgrading from previous versions:
constraints that were accepted before but were not correctly enforced
will now either be enforced correctly or not accepted at all. Either
could result in restore failures, but in practice I think very few
users will notice the difference, since the use case is pretty
marginal anyway and few users will be relying on features that have
not historically worked.
Amit Kapila, reviewed by Rushabh Lathia, with doc changes by me.
There's no inherent reason why an aggregate function can't be variadic
(even VARIADIC ANY) if its transition function can handle the case.
Indeed, this patch to add the feature touches none of the planner or
executor, and little of the parser; the main missing stuff was DDL and
pg_dump support.
It is true that variadic aggregates can create the same sort of ambiguity
about parameters versus ORDER BY keys that was complained of when we
(briefly) had both one- and two-argument forms of string_agg(). However,
the policy formed in response to that discussion only said that we'd not
create any built-in aggregates with varying numbers of arguments, not that
we shouldn't allow users to do it. So the logical extension of that is
we can allow users to make variadic aggregates as long as we're wary about
shipping any such in core.
In passing, this patch allows aggregate function arguments to be named, to
the extent of remembering the names in pg_proc and dumping them in pg_dump.
You can't yet call an aggregate using named-parameter notation. That seems
like a likely future extension, but it'll take some work, and it's not what
this patch is really about. Likewise, there's still some work needed to
make window functions handle VARIADIC fully, but I left that for another
day.
initdb forced because of new aggvariadic field in Aggref parse nodes.
My tweak of these error messages in commit c359a1b082 contained the
thinko that a query would always have rowMarks set for a query
containing a locking clause. Not so: when declaring a cursor, for
instance, rowMarks isn't set at the point we're checking, so we'd be
dereferencing a NULL pointer.
The fix is to pass the lock strength to the function raising the error,
instead of trying to reverse-engineer it. The result not only is more
robust, but it also seems cleaner overall.
Per report from Robert Haas.
Use of this function has spread into the parser and rewriter, so it seems
like time to pull it out of the optimizer and put it into the more central
nodeFuncs module. This eliminates the need to #include optimizer/clauses.h
in most of the calling files, demonstrating that this function was indeed a
bit outside the normal code reference patterns.
It's possible to drop a column from an input table of a JOIN clause in a
view, if that column is nowhere actually referenced in the view. But it
will still be there in the JOIN clause's joinaliasvars list. We used to
replace such entries with NULL Const nodes, which is handy for generation
of RowExpr expansion of a whole-row reference to the view. The trouble
with that is that it can't be distinguished from the situation after
subquery pull-up of a constant subquery output expression below the JOIN.
Instead, replace such joinaliasvars with null pointers (empty expression
trees), which can't be confused with pulled-up expressions. expandRTE()
still emits the old convention, though, for convenience of RowExpr
generation and to reduce the risk of breaking extension code.
In HEAD and 9.3, this patch also fixes a problem with some new code in
ruleutils.c that was failing to cope with implicitly-casted joinaliasvars
entries, as per recent report from Feike Steenbergen. That oversight was
because of an inadequate description of the data structure in parsenodes.h,
which I've now corrected. There were some pre-existing oversights of the
same ilk elsewhere, which I believe are now all fixed.
In commit 0ac5ad5134 I changed some error messages from "FOR
UPDATE/SHARE" to a rather long gobbledygook which nobody liked. Then,
in commit cb9b66d31 I changed them again, but the alternative chosen
there was deemed suboptimal by Peter Eisentraut, who in message
1373937980.20441.8.camel@vanquo.pezone.net proposed an alternative
involving a dynamically-constructed string based on the actual locking
strength specified in the SQL command. This patch implements that
suggestion.
For simple views which are automatically updatable, this patch allows
the user to specify what level of checking should be done on records
being inserted or updated. For 'LOCAL CHECK', new tuples are validated
against the conditionals of the view they are being inserted into, while
for 'CASCADED CHECK' the new tuples are validated against the
conditionals for all views involved (from the top down).
This option is part of the SQL specification.
Dean Rasheed, reviewed by Pavel Stehule
This is more efficient and simpler . It does mean that an untyped NULL
can no longer be used in such cases, which should be mentioned in
Release Notes, but doesn't seem a terrible loss. The workaround is to
cast the NULL to some array type.
Pavel Stehule, reviewed by Jeevan Chalke.
This is SQL-standard with a few extensions, namely support for
subqueries and outer references in clause expressions.
catversion bump due to change in Aggref and WindowFunc.
David Fetter, reviewed by Dean Rasheed.
This allows reads to continue without any blocking while a REFRESH
runs. The new data appears atomically as part of transaction
commit.
Review questioned the Assert that a matview was not a system
relation. This will be addressed separately.
Reviewed by Hitoshi Harada, Robert Haas, Andres Freund.
Merged after review with security patch f3ab5d4.
This results in a slightly less specific error message when OVER
is used in a context where we don't accept window functions, but
per discussion, it's worth it to get the benefit of not needing
to reserve this keyword any more. This same refactoring will
also let us avoid reserving some other keywords that we expect
to add in upcoming patches (specifically, IGNORE, RESPECT, and
FILTER).
Troels Nielsen, with minor changes by me
When the existing code here was written, it made sense to special-case
RowExprs because that was the only way that we could handle row comparisons
at all. Now that we have record_eq() and arrays of composites, the generic
logic for "scalar" types will in fact work on RowExprs too, so there's no
reason to throw error for combinations of RowExprs and other ways of
forming composite values, nor to ignore the possibility of using a
ScalarArrayOpExpr. But keep using the old logic when comparing two
RowExprs, for consistency with the main transformAExprOp() logic. (This
allows some cases with not-quite-identical rowtypes to succeed, so we might
get push-back if we removed it.) Per bug #8198 from Rafal Rzepecki.
Back-patch to all supported branches, since this works fine as far back as
8.4.
Rafal Rzepecki and Tom Lane
Long-standing code has called tolower() on identifier character bytes
with the high bit set. This is clearly an error and produces junk output
when the encoding is multi-byte. This patch therefore restricts this
activity to cases where there is a character with the high bit set AND
the encoding is single-byte.
There have been numerous gripes about this, most recently from Martin
Schäfer.
Backpatch to all live releases.
In commit 2c92edad48796119c83d7dbe6c33425d1924626d, I broke "EXPLAIN
(ANALYZE)" syntax, because I mistakenly thought that ANALYZE/ANALYSE were
only partially reserved and thus would be included in NonReservedWord;
but actually they're fully reserved so they still need to be called out
here.
A nicer solution would be to demote these words to type_func_name_keyword
status (they can't be less than that because of "VACUUM [ANALYZE] ColId").
While that works fine so far as the core grammar is concerned, it breaks
ECPG's grammar for reasons I don't have time to isolate at the moment.
So do this for the time being.
Per report from Kevin Grittner. Back-patch to 9.0, like the previous
commit.
This change makes type_func_name_keywords less reserved than they were
before, by allowing them for role names, language names, EXPLAIN and COPY
options, and SET values for GUCs; which are all places where few if any
actual keywords could appear instead, so no new ambiguities are introduced.
The main driver for this change is to allow "COPY ... (FORMAT BINARY)"
to work without quoting the word "binary". That is an inconsistency that
has been complained of repeatedly over the years (at least by Pavel Golub,
Kurt Lidl, and Simon Riggs); but we hadn't thought of any non-ugly solution
until now.
Back-patch to 9.0 where the COPY (FORMAT BINARY) syntax was introduced.
