Stop comparing access method OID values against HASH_AM_OID and
BTREE_AM_OID, and instead check the IndexAmRoutine for an index to see
if it advertises its ability to perform the necessary ordering,
hashing, or cross-type comparing functionality. A field amcanorder
already existed, this uses it more widely. Fields amcanhash and
amcancrosscompare are added for the other purposes.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/E72EAA49-354D-4C2E-8EB9-255197F55330@enterprisedb.com
For each Index AM, provide a mapping between operator strategies and
the system-wide generic concept of a comparison type. For example,
for btree, BTLessStrategyNumber maps to and from COMPARE_LT. Numerous
places in the planner and executor think directly in terms of btree
strategy numbers (and a few in terms of hash strategy numbers.) These
should be converted over subsequent commits to think in terms of
CompareType instead. (This commit doesn't make any use of this API
yet.)
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/E72EAA49-354D-4C2E-8EB9-255197F55330@enterprisedb.com
The new compact_attrs array stores a few select fields from
FormData_pg_attribute in a more compact way, using only 16 bytes per
column instead of the 104 bytes that FormData_pg_attribute uses. Using
CompactAttribute allows performance-critical operations such as tuple
deformation to be performed without looking at the FormData_pg_attribute
element in TupleDesc which means fewer cacheline accesses.
For some workloads, tuple deformation can be the most CPU intensive part
of processing the query. Some testing with 16 columns on a table
where the first column is variable length showed around a 10% increase in
transactions per second for an OLAP type query performing aggregation on
the 16th column. However, in certain cases, the increases were much
higher, up to ~25% on one AMD Zen4 machine.
This also makes pg_attribute.attcacheoff redundant. A follow-on commit
will remove it, thus shrinking the FormData_pg_attribute struct by 4
bytes.
Author: David Rowley
Reviewed-by: Andres Freund, Victor Yegorov
Discussion: https://postgr.es/m/CAApHDvrBztXP3yx=NKNmo3xwFAFhEdyPnvrDg3=M0RhDs+4vYw@mail.gmail.com
The new compact_attrs array stores a few select fields from
FormData_pg_attribute in a more compact way, using only 16 bytes per
column instead of the 104 bytes that FormData_pg_attribute uses. Using
CompactAttribute allows performance-critical operations such as tuple
deformation to be performed without looking at the FormData_pg_attribute
element in TupleDesc which means fewer cacheline accesses. With this
change, NAMEDATALEN could be increased with a much smaller negative impact
on performance.
For some workloads, tuple deformation can be the most CPU intensive part
of processing the query. Some testing with 16 columns on a table
where the first column is variable length showed around a 10% increase in
transactions per second for an OLAP type query performing aggregation on
the 16th column. However, in certain cases, the increases were much
higher, up to ~25% on one AMD Zen4 machine.
This also makes pg_attribute.attcacheoff redundant. A follow-on commit
will remove it, thus shrinking the FormData_pg_attribute struct by 4
bytes.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvrBztXP3yx=NKNmo3xwFAFhEdyPnvrDg3=M0RhDs+4vYw@mail.gmail.com
Reviewed-by: Andres Freund, Victor Yegorov
The index access methods all had similar code that copied the
passed-in scan keys to local storage. They all used memmove() for
that, which is not wrong, but it seems confusing not to use memcpy()
when that would work. Presumably, this was all once copied from
ancient code and never adjusted.
Discussion: https://www.postgresql.org/message-id/flat/f8c739d9-f48d-4187-b214-df3391ba41ab@eisentraut.org
Reconstruction of an SP-GiST index by REINDEX CONCURRENTLY may
insert some REDIRECT tuples. This will typically happen in
a transaction that lacks an XID, which leads either to assertion
failure in spgFormDeadTuple or to insertion of a REDIRECT tuple
with zero xid. The latter's not good either, since eventually
VACUUM will apply GlobalVisTestIsRemovableXid() to the zero xid,
resulting in either an assertion failure or a garbage answer.
In practice, since REINDEX CONCURRENTLY locks out index scans
till it's done, it doesn't matter whether it inserts REDIRECTs
or PLACEHOLDERs; and likewise it doesn't matter how soon VACUUM
reduces such a REDIRECT to a PLACEHOLDER. So in non-assert builds
there's no observable problem here, other than perhaps a little
index bloat. But it's not behaving as intended.
To fix, remove the failing Assert in spgFormDeadTuple, acknowledging
that we might sometimes insert a zero XID; and guard VACUUM's
GlobalVisTestIsRemovableXid() call with a test for valid XID,
ensuring that we'll reduce such a REDIRECT the first time VACUUM
sees it. (Versions before v14 use TransactionIdPrecedes here,
which won't fail on zero xid, so they really have no bug at all
in non-assert builds.)
Another solution could be to not create REDIRECTs at all during
REINDEX CONCURRENTLY, making the relevant code paths treat that
case like index build (which likewise knows that no concurrent
index scans can be happening). That would allow restoring the
Assert in spgFormDeadTuple, but we'd still need the VACUUM change
because redirection tuples with zero xid may be out there already.
But there doesn't seem to be a nice way for spginsert() to tell that
it's being called in REINDEX CONCURRENTLY without some API changes,
so we'll leave that as a possible future improvement.
In HEAD, also rename the SpGistState.myXid field to redirectXid,
which seems less misleading (since it might not in fact be our
transaction's XID) and is certainly less uninformatively generic.
Per bug #18499 from Alexander Lakhin. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/18499-8a519c280f956480@postgresql.org
as determined by include-what-you-use (IWYU)
While IWYU also suggests to *add* a bunch of #include's (which is its
main purpose), this patch does not do that. In some cases, a more
specific #include replaces another less specific one.
Some manual adjustments of the automatic result:
- IWYU currently doesn't know about includes that provide global
variable declarations (like -Wmissing-variable-declarations), so
those includes are being kept manually.
- All includes for port(ability) headers are being kept for now, to
play it safe.
- No changes of catalog/pg_foo.h to catalog/pg_foo_d.h, to keep the
patch from exploding in size.
Note that this patch touches just *.c files, so nothing declared in
header files changes in hidden ways.
As a small example, in src/backend/access/transam/rmgr.c, some IWYU
pragma annotations are added to handle a special case there.
Discussion: https://www.postgresql.org/message-id/flat/af837490-6b2f-46df-ba05-37ea6a6653fc%40eisentraut.org
The new facility makes it easier to optimize bulk loading, as the
logic for buffering, WAL-logging, and syncing the relation only needs
to be implemented once. It's also less error-prone: We have had a
number of bugs in how a relation is fsync'd - or not - at the end of a
bulk loading operation. By centralizing that logic to one place, we
only need to write it correctly once.
The new facility is faster for small relations: Instead of of calling
smgrimmedsync(), we register the fsync to happen at next checkpoint,
which avoids the fsync latency. That can make a big difference if you
are e.g. restoring a schema-only dump with lots of relations.
It is also slightly more efficient with large relations, as the WAL
logging is performed multiple pages at a time. That avoids some WAL
header overhead. The sorted GiST index build did that already, this
moves the buffering to the new facility.
The changes to pageinspect GiST test needs an explanation: Before this
patch, the sorted GiST index build set the LSN on every page to the
special GistBuildLSN value, not the LSN of the WAL record, even though
they were WAL-logged. There was no particular need for it, it just
happened naturally when we wrote out the pages before WAL-logging
them. Now we WAL-log the pages first, like in B-tree build, so the
pages are stamped with the record's real LSN. When the build is not
WAL-logged, we still use GistBuildLSN. To make the test output
predictable, use an unlogged index.
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/30e8f366-58b3-b239-c521-422122dd5150%40iki.fi
Commit 6b80394781 introduced integer comparison functions designed
to be as efficient as possible while avoiding overflow. This
commit makes use of these functions in many of the in-tree qsort()
comparators to help ensure transitivity. Many of these comparator
functions should also see a small performance boost.
Author: Mats Kindahl
Reviewed-by: Andres Freund, Fabrízio de Royes Mello
Discussion: https://postgr.es/m/CA%2B14426g2Wa9QuUpmakwPxXFWG_1FaY0AsApkvcTBy-YfS6uaw%40mail.gmail.com
This is necessary when spgcanreturn() is invoked on a partitioned
index, and the failure might be reachable in other scenarios as
well. The rest of what spgGetCache() does is perfectly sensible
for a partitioned index, so we should allow it to go through.
I think the main takeaway from this is that we lack sufficient test
coverage for non-btree partitioned indexes. Therefore, I added
simple test cases for brin and gin as well as spgist (hash and
gist AMs were covered already in indexing.sql).
Per bug #18256 from Alexander Lakhin. Although the known test case
only fails since v16 (3c569049b), I've got no faith at all that there
aren't other ways to reach this problem; so back-patch to all
supported branches.
Discussion: https://postgr.es/m/18256-0b0e1b6e4a620f1b@postgresql.org
Allow using multiple worker processes to build BRIN index, which until
now was supported only for BTREE indexes. For large tables this often
results in significant speedup when the build is CPU-bound.
The work is split in a simple way - each worker builds BRIN summaries on
a subset of the table, determined by the regular parallel scan used to
read the data, and feeds them into a shared tuplesort which sorts them
by blkno (start of the range). The leader then reads this sorted stream
of ranges, merges duplicates (which may happen if the parallel scan does
not align with BRIN pages_per_range), and adds the resulting ranges into
the index.
The number of duplicate results produced by workers (requiring merging
in the leader process) should be fairly small, thanks to how parallel
scans assign chunks to workers. The likelihood of duplicate results may
increase for higher pages_per_range values, but then there are fewer
page ranges in total. In any case, we expect the merging to be much
cheaper than summarization, so this should be a win.
Most of the parallelism infrastructure is a simplified copy of the code
used by BTREE indexes, omitting the parts irrelevant for BRIN indexes
(e.g. uniqueness checks).
This also introduces a new index AM flag amcanbuildparallel, determining
whether to attempt to start parallel workers for the index build.
Original patch by me, with reviews and substantial reworks by Matthias
van de Meent, certainly enough to make him a co-author.
Author: Tomas Vondra, Matthias van de Meent
Reviewed-by: Matthias van de Meent
Discussion: https://postgr.es/m/c2ee7d69-ce17-43f2-d1a0-9811edbda6e6%40enterprisedb.com
The brininsert code used to initialize (and destroy) BrinDesc and
BrinRevmap for each tuple, which is not free. This patch initializes
these structures only once, and reuses them for all inserts in the same
command. The data is passed through indexInfo->ii_AmCache.
This also introduces an optional AM callback "aminsertcleanup" that
allows performing custom cleanup in case simply pfree-ing ii_AmCache is
not sufficient (which is the case when the cache contains TupleDesc,
Buffers, and so on).
Author: Soumyadeep Chakraborty
Reviewed-by: Alvaro Herrera, Matthias van de Meent, Tomas Vondra
Discussion: https://postgr.es/m/CAE-ML%2B9r2%3DaO1wwji1sBN9gvPz2xRAtFUGfnffpd0ZqyuzjamA%40mail.gmail.com
Since C99, there can be a trailing comma after the last value in an
enum definition. A lot of new code has been introducing this style on
the fly. Some new patches are now taking an inconsistent approach to
this. Some add the last comma on the fly if they add a new last
value, some are trying to preserve the existing style in each place,
some are even dropping the last comma if there was one. We could
nudge this all in a consistent direction if we just add the trailing
commas everywhere once.
I omitted a few places where there was a fixed "last" value that will
always stay last. I also skipped the header files of libpq and ecpg,
in case people want to use those with older compilers. There were
also a small number of cases where the enum type wasn't used anywhere
(but the enum values were), which ended up confusing pgindent a bit,
so I left those alone.
Discussion: https://www.postgresql.org/message-id/flat/386f8c45-c8ac-4681-8add-e3b0852c1620%40eisentraut.org
Some of the ambuildempty functions used smgrwrite() directly, followed
by smgrimmedsync(). A few small problems with that:
Firstly, one is supposed to use smgrextend() when extending a
relation, not smgrwrite(). It doesn't make much difference in
production builds. smgrextend() updates the relation size cache, so
you miss that, but that's harmless because we never use the cached
relation size of an init fork. But if you compile with
CHECK_WRITE_VS_EXTEND, you get an assertion failure.
Secondly, the smgrwrite() calls were performed before WAL-logging, so
the page image written to disk had 0/0 as the LSN, not the LSN of the
WAL record. That's also harmless in practice, but seems sloppy.
Thirdly, it's better to use the buffer cache, because then you don't
need to smgrimmedsync() the relation to disk, which adds latency.
Bypassing the cache makes sense for bulk operations like index
creation, but not when you're just initializing an empty index.
Creation of unlogged tables is hardly performance bottleneck in any
real world applications, but nevertheless.
Backpatch to v16, but no further. These issues should be harmless in
practice, so better to not rock the boat in older branches.
Reviewed-by: Robert Haas
Discussion: https://www.postgresql.org/message-id/6e5bbc08-cdfc-b2b3-9e23-1a914b9850a9@iki.fi
Commit 31966b15 invented a way for functions dealing with relation
extension to accept a Relation in online code and an SMgrRelation in
recovery code. It seems highly likely that future bufmgr.c interfaces
will face the same problem, and need to do something similar.
Generalize the names so that each interface doesn't have to re-invent
the wheel.
Back-patch to 16. Since extension AM authors might start using the
constructor macros once 16 ships, we agreed to do the rename in 16
rather than waiting for 17.
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKG%2B6tLD2BhpRWycEoti6LVLyQq457UL4ticP5xd8LqHySA%40mail.gmail.com
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
During WAL replay on the standby, when a conflict with a logical slot is
identified, invalidate such slots. There are two sources of conflicts:
1) Using the information added in 6af1793954, logical slots are invalidated if
required rows are removed
2) wal_level on the primary server is reduced to below logical
Uses the infrastructure introduced in the prior commit. FIXME: add commit
reference.
Change InvalidatePossiblyObsoleteSlot() to use a recovery conflict to
interrupt use of a slot, if called in the startup process. The new recovery
conflict is added to pg_stat_database_conflicts, as confl_active_logicalslot.
See 6af1793954 for an overall design of logical decoding on a standby.
Bumps catversion for the addition of the pg_stat_database_conflicts column.
Bumps PGSTAT_FILE_FORMAT_ID for the same reason.
Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Amit Khandekar <amitdkhan.pg@gmail.com> (in an older version)
Reviewed-by: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Fabrízio de Royes Mello <fabriziomello@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20230407075009.igg7be27ha2htkbt@awork3.anarazel.de
In order to have the option to use O_DIRECT/FILE_FLAG_NO_BUFFERING in a
later commit, we need the addresses of user space buffers to be well
aligned. The exact requirements vary by OS and file system (typically
sectors and/or memory pages). The address alignment size is set to
4096, which is enough for currently known systems: it matches modern
sectors and common memory page size. There is no standard governing
O_DIRECT's requirements so we might eventually have to reconsider this
with more information from the field or future systems.
Aligning I/O buffers on memory pages is also known to improve regular
buffered I/O performance.
Three classes of I/O buffers for regular data pages are adjusted:
(1) Heap buffers are now allocated with the new palloc_aligned() or
MemoryContextAllocAligned() functions introduced by commit 439f6175.
(2) Stack buffers now use a new struct PGIOAlignedBlock to respect
PG_IO_ALIGN_SIZE, if possible with this compiler. (3) The buffer
pool is also aligned in shared memory.
WAL buffers were already aligned on XLOG_BLCKSZ. It's possible for
XLOG_BLCKSZ to be configured smaller than PG_IO_ALIGNED_SIZE and thus
for O_DIRECT WAL writes to fail to be well aligned, but that's a
pre-existing condition and will be addressed by a later commit.
BufFiles are not yet addressed (there's no current plan to use O_DIRECT
for those, but they could potentially get some incidental speedup even
in plain buffered I/O operations through better alignment).
If we can't align stack objects suitably using the compiler extensions
we know about, we disable the use of O_DIRECT by setting PG_O_DIRECT to
0. This avoids the need to consider systems that have O_DIRECT but
can't align stack objects the way we want; such systems could in theory
be supported with more work but we don't currently know of any such
machines, so it's easier to pretend there is no O_DIRECT support
instead. That's an existing and tested class of system.
Add assertions that all buffers passed into smgrread(), smgrwrite() and
smgrextend() are correctly aligned, unless PG_O_DIRECT is 0 (= stack
alignment tricks may be unavailable) or the block size has been set too
small to allow arrays of buffers to be all aligned.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CA+hUKGK1X532hYqJ_MzFWt0n1zt8trz980D79WbjwnT-yYLZpg@mail.gmail.com
A few places are not converted. Some because they are tackled in later
commits (e.g. hio.c, xlogutils.c), some because they are more
complicated (e.g. brin_pageops.c). Having a few users of ReadBuffer(P_NEW) is
good anyway, to ensure the backward compat path stays working.
Discussion: https://postgr.es/m/20221029025420.eplyow6k7tgu6he3@awork3.anarazel.de
Commit 61b313e4 made VACUUM pass down a heaprel to index AM bulkdelete
and vacuumcleanup routines. Although this was primarily intended as
preparation for logical decoding on standbys, it also made it easy to
correct an old deficiency in how we determine how to cleanup SP-GiST
redirect and placeholder tuples.
Pass the heaprel to GlobalVisTestFor() during cleanup of redirect and
placeholder tuples, rather than pessimistically passing NULL.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/02392033-f030-a3c8-c7d0-5c27eb529fec@gmail.com
This commit only implements one prerequisite part for allowing logical
decoding. The commit message contains an explanation of the overall design,
which later commits will refer back to.
Overall design:
1. We want to enable logical decoding on standbys, but replay of WAL
from the primary might remove data that is needed by logical decoding,
causing error(s) on the standby. To prevent those errors, a new replication
conflict scenario needs to be addressed (as much as hot standby does).
2. Our chosen strategy for dealing with this type of replication slot
is to invalidate logical slots for which needed data has been removed.
3. To do this we need the latestRemovedXid for each change, just as we
do for physical replication conflicts, but we also need to know
whether any particular change was to data that logical replication
might access. That way, during WAL replay, we know when there is a risk of
conflict and, if so, if there is a conflict.
4. We can't rely on the standby's relcache entries for this purpose in
any way, because the startup process can't access catalog contents.
5. Therefore every WAL record that potentially removes data from the
index or heap must carry a flag indicating whether or not it is one
that might be accessed during logical decoding.
Why do we need this for logical decoding on standby?
First, let's forget about logical decoding on standby and recall that
on a primary database, any catalog rows that may be needed by a logical
decoding replication slot are not removed.
This is done thanks to the catalog_xmin associated with the logical
replication slot.
But, with logical decoding on standby, in the following cases:
- hot_standby_feedback is off
- hot_standby_feedback is on but there is no a physical slot between
the primary and the standby. Then, hot_standby_feedback will work,
but only while the connection is alive (for example a node restart
would break it)
Then, the primary may delete system catalog rows that could be needed
by the logical decoding on the standby (as it does not know about the
catalog_xmin on the standby).
So, it’s mandatory to identify those rows and invalidate the slots
that may need them if any. Identifying those rows is the purpose of
this commit.
Implementation:
When a WAL replay on standby indicates that a catalog table tuple is
to be deleted by an xid that is greater than a logical slot's
catalog_xmin, then that means the slot's catalog_xmin conflicts with
the xid, and we need to handle the conflict. While subsequent commits
will do the actual conflict handling, this commit adds a new field
isCatalogRel in such WAL records (and a new bit set in the
xl_heap_visible flags field), that is true for catalog tables, so as to
arrange for conflict handling.
The affected WAL records are the ones that already contain the
snapshotConflictHorizon field, namely:
- gistxlogDelete
- gistxlogPageReuse
- xl_hash_vacuum_one_page
- xl_heap_prune
- xl_heap_freeze_page
- xl_heap_visible
- xl_btree_reuse_page
- xl_btree_delete
- spgxlogVacuumRedirect
Due to this new field being added, xl_hash_vacuum_one_page and
gistxlogDelete do now contain the offsets to be deleted as a
FLEXIBLE_ARRAY_MEMBER. This is needed to ensure correct alignment.
It's not needed on the others struct where isCatalogRel has
been added.
This commit just introduces the WAL format changes mentioned above. Handling
the actual conflicts will follow in future commits.
Bumps XLOG_PAGE_MAGIC as the several WAL records are changed.
Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Author: Andres Freund <andres@anarazel.de> (in an older version)
Author: Amit Khandekar <amitdkhan.pg@gmail.com> (in an older version)
Reviewed-by: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Fabrízio de Royes Mello <fabriziomello@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
This is done in preparation for logical decoding on standby, which needs to
include whether visibility affecting WAL records are about a (user) catalog
table. Which is only known for the table, not the indexes.
It's also nice to be able to pass the heap relation to GlobalVisTestFor() in
vacuumRedirectAndPlaceholder().
Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/21b700c3-eecf-2e05-a699-f8c78dd31ec7@gmail.com
When determining whether an index update may be skipped by using HOT, we
can ignore attributes indexed by block summarizing indexes without
references to individual tuples that need to be cleaned up.
A new type TU_UpdateIndexes provides a signal to the executor to
determine which indexes to update - no indexes, all indexes, or only the
summarizing indexes.
This also removes rd_indexattr list, and replaces it with rd_attrsvalid
flag. The list was not used anywhere, and a simple flag is sufficient.
This was originally committed as 5753d4ee32, but then got reverted by
e3fcca0d0d because of correctness issues.
Original patch by Josef Simanek, various fixes and improvements by Tomas
Vondra and me.
Authors: Matthias van de Meent, Josef Simanek, Tomas Vondra
Reviewed-by: Tomas Vondra, Alvaro Herrera
Discussion: https://postgr.es/m/05ebcb44-f383-86e3-4f31-0a97a55634cf@enterprisedb.com
Discussion: https://postgr.es/m/CAFp7QwpMRGcDAQumN7onN9HjrJ3u4X3ZRXdGFT0K5G2JWvnbWg%40mail.gmail.com
While on it, newlines are removed from the end of two elog() strings.
The others are simple grammar mistakes. One comment in pg_upgrade
referred incorrectly to sequences since a7e5457.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20221230231257.GI1153@telsasoft.com
Backpatch-through: 11
Standardize on the name snapshotConflictHorizon for all XID fields from
WAL records that generate recovery conflicts when in hot standby mode.
This supersedes the previous latestRemovedXid naming convention.
The new naming convention places emphasis on how the values are actually
used by REDO routines. How the values are generated during original
execution (details of which vary by record type) is deemphasized. Users
of tools like pg_waldump can now grep for snapshotConflictHorizon to see
all potential sources of recovery conflicts in a standardized way,
without necessarily having to consider which specific record types might
be involved.
Also bring a couple of WAL record types that didn't follow any kind of
naming convention into line. These are heapam's VISIBLE record type and
SP-GiST's VACUUM_REDIRECT record type. Now every WAL record whose REDO
routine calls ResolveRecoveryConflictWithSnapshot() passes through the
snapshotConflictHorizon field from its WAL record. This is follow-up
work to the refactoring from commit 9e540599 that made FREEZE_PAGE WAL
records use a standard snapshotConflictHorizon style XID cutoff.
No bump in XLOG_PAGE_MAGIC, since the underlying format of affected WAL
records doesn't change.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAH2-Wzm2CQUmViUq7Opgk=McVREHSOorYaAjR1ZpLYkRN7_dPw@mail.gmail.com
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211012083721.hvixq4pnh2pixr3j@alap3.anarazel.de
These should have been included in 421892a19 as these shadowed variable
warnings can also be fixed by adjusting the scope of the shadowed variable
to put the declaration for it in an inner scope.
This is part of the same effort as f01592f91.
By my count, this takes the warning count from 114 down to 106.
Author: David Rowley and Justin Pryzby
Discussion: https://postgr.es/m/CAApHDvrwLGBP%2BYw9vriayyf%3DXR4uPWP5jr6cQhP9au_kaDUhbA%40mail.gmail.com
We have been using the term RelFileNode to refer to either (1) the
integer that is used to name the sequence of files for a certain relation
within the directory set aside for that tablespace/database combination;
or (2) that value plus the OIDs of the tablespace and database; or
occasionally (3) the whole series of files created for a relation
based on those values. Using the same name for more than one thing is
confusing.
Replace RelFileNode with RelFileNumber when we're talking about just the
single number, i.e. (1) from above, and with RelFileLocator when we're
talking about all the things that are needed to locate a relation's files
on disk, i.e. (2) from above. In the places where we refer to (3) as
a relfilenode, instead refer to "relation storage".
Since there is a ton of SQL code in the world that knows about
pg_class.relfilenode, don't change the name of that column, or of other
SQL-facing things that derive their name from it.
On the other hand, do adjust closely-related internal terminology. For
example, the structure member names dbNode and spcNode appear to be
derived from the fact that the structure itself was called RelFileNode,
so change those to dbOid and spcOid. Likewise, various variables with
names like rnode and relnode get renamed appropriately, according to
how they're being used in context.
Hopefully, this is clearer than before. It is also preparation for
future patches that intend to widen the relfilenumber fields from its
current width of 32 bits. Variables that store a relfilenumber are now
declared as type RelFileNumber rather than type Oid; right now, these
are the same, but that can now more easily be changed.
Dilip Kumar, per an idea from me. Reviewed also by Andres Freund.
I fixed some whitespace issues, changed a couple of words in a
comment, and made one other minor correction.
Discussion: http://postgr.es/m/CA+TgmoamOtXbVAQf9hWFzonUo6bhhjS6toZQd7HZ-pmojtAmag@mail.gmail.com
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Discussion: http://postgr.es/m/CAFiTN-vTe79M8uDH1yprOU64MNFE+R3ODRuA+JWf27JbhY4hJw@mail.gmail.com
This reverts commits 5753d4ee32 and fe60b67250 that modified HOT to
ignore BRIN indexes. The commit message for 5753d4ee32 claims that:
When determining whether an index update may be skipped by using
HOT, we can ignore attributes indexed only by BRIN indexes. There
are no index pointers to individual tuples in BRIN, and the page
range summary will be updated anyway as it relies on visibility
info.
This is partially incorrect - it's true BRIN indexes don't point to
individual tuples, so HOT chains are not an issue, but the visibitlity
info is not sufficient to keep the index up to date. This can easily
result in corrupted indexes, as demonstrated in the hackers thread.
This does not mean relaxing the HOT restrictions for BRIN is a lost
cause, but it needs to handle the two aspects (allowing HOT chains and
updating the page range summaries) as separate. But that requires a
major changes, and it's too late for that in the current dev cycle.
Reported-by: Tomas Vondra
Discussion: https://postgr.es/m/05ebcb44-f383-86e3-4f31-0a97a55634cf@enterprisedb.com
When determining whether an index update may be skipped by using HOT, we
can ignore attributes indexed only by BRIN indexes. There are no index
pointers to individual tuples in BRIN, and the page range summary will
be updated anyway as it relies on visibility info.
This also removes rd_indexattr list, and replaces it with rd_attrsvalid
flag. The list was not used anywhere, and a simple flag is sufficient.
Patch by Josef Simanek, various fixes and improvements by me.
Author: Josef Simanek
Reviewed-by: Tomas Vondra, Alvaro Herrera
Discussion: https://postgr.es/m/CAFp7QwpMRGcDAQumN7onN9HjrJ3u4X3ZRXdGFT0K5G2JWvnbWg%40mail.gmail.com
