get_explain_guc_options() crashed if a string GUC marked GUC_EXPLAIN
has a NULL boot_val. Nosing around found a couple of other places
that seemed insufficiently cautious about NULL string values, although
those are likely unreachable in practice. Add some commentary
defining the expectations for NULL values of string variables,
in hopes of forestalling future additions of more such bugs.
Xing Guo, Aleksander Alekseev, Tom Lane
Discussion: https://postgr.es/m/CACpMh+AyDx5YUpPaAgzVwC1d8zfOL4JoD-uyFDnNSa1z0EsDQQ@mail.gmail.com
We allow users to set the values of not-yet-loaded extension GUCs,
remembering those values in "placeholder" GUC entries. When/if
the extension is loaded later in the session, we need to verify that
the user had permissions to set the GUC. That was done correctly
before commit a0ffa885e, but as of that commit, we'd check the
permissions of the active role when the LOAD happens, not the role
that had set the value. (This'd be a security bug if it had made it
into a released version.)
In principle this is simple enough to fix: we just need to remember
the exact role OID that set each GUC value, and use that not
GetUserID() when verifying permissions. Maintaining that data in
the guc.c data structures is slightly tedious, but fortunately it's
all basically just copy-n-paste of the logic for tracking the
GucSource of each setting, as we were already doing.
Another oversight is that validate_option_array_item() hadn't
been taught to check for granted GUC privileges. This appears
to manifest only in that ALTER ROLE/DATABASE RESET ALL will
fail to reset settings that the user should be allowed to reset.
Patch by myself and Nathan Bossart, per report from Nathan Bossart.
Back-patch to v15 where the faulty code came in.
Discussion: https://postgr.es/m/20220706224727.GA2158260@nathanxps13
Up until now, we've had a policy of only marking certain variables
in the PostgreSQL header files with PGDLLIMPORT, but now we've
decided to mark them all. This means that extensions running on
Windows should no longer operate at a disadvantage as compared to
extensions running on Linux: if the variable is present in a header
file, it should be accessible.
Discussion: http://postgr.es/m/CA+TgmoYanc1_FSfimhgiWSqVyP5KKmh5NP2BWNwDhO8Pg2vGYQ@mail.gmail.com
Introduce a new GUC recovery_prefetch. When enabled, look ahead in the
WAL and try to initiate asynchronous reading of referenced data blocks
that are not yet cached in our buffer pool. For now, this is done with
posix_fadvise(), which has several caveats. Since not all OSes have
that system call, "try" is provided so that it can be enabled where
available. Better mechanisms for asynchronous I/O are possible in later
work.
Set to "try" for now for test coverage. Default setting to be finalized
before release.
The GUC wal_decode_buffer_size limits the distance we can look ahead in
bytes of decoded data.
The existing GUC maintenance_io_concurrency is used to limit the number
of concurrent I/Os allowed, based on pessimistic heuristics used to
infer that I/Os have begun and completed. We'll also not look more than
maintenance_io_concurrency * 4 block references ahead.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com> (earlier version)
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier version)
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> (earlier version)
Tested-by: Tomas Vondra <tomas.vondra@2ndquadrant.com> (earlier version)
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com> (earlier version)
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com> (earlier version)
Tested-by: Sait Talha Nisanci <Sait.Nisanci@microsoft.com> (earlier version)
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
This set of commits has some bugs with known fixes, but at this late
stage in the release cycle it seems best to revert and resubmit next
time, along with some new automated test coverage for this whole area.
Commits reverted:
dc88460c: Doc: Review for "Optionally prefetch referenced data in recovery."
1d257577: Optionally prefetch referenced data in recovery.
f003d9f8: Add circular WAL decoding buffer.
323cbe7c: Remove read_page callback from XLogReader.
Remove the new GUC group WAL_RECOVERY recently added by a55a9847, as the
corresponding section of config.sgml is now reverted.
Discussion: https://postgr.es/m/CAOuzzgrn7iKnFRsB4MHp3UisEQAGgZMbk_ViTN4HV4-Ksq8zCg%40mail.gmail.com
It seems that various people have moved GUCs around in the config.sgml
listing without bothering to make the code agree. Ensure that the
config_group codes assigned to GUCs match where they are listed in
config.sgml. Likewise ensure that postgresql.conf.sample lists GUCs
in the same sub-section and same ordering as they appear in config.sgml.
(I've got some doubts about some of these choices, but for the purposes
of this patch, we'll treat config.sgml as gospel.)
Notably, this requires adding a WAL_RECOVERY config_group value,
because 1d257577e didn't. As long as we're renumbering that enum
anyway, let's take out the values corresponding to major groups
that are divided into sub-groups. No GUC should be assigned to the
major group itself, so those values just create a temptation to
do the wrong thing, while adding work for translators.
In passing, adjust the short_desc strings for PRESET_OPTIONS GUCs
to uniformly use the phrasing "Shows XYZ.", removing the impression
some of these strings left that you can set the value.
While some of these errors are old, no back-patch, as changing the
contents of the pg_settings view in stable branches seems more likely
to be seen as a compatibility break than anything helpful.
Bharath Rupireddy, Justin Pryzby, Tom Lane
Discussion: https://postgr.es/m/16997-ff16127f6e0d1390@postgresql.org
Discussion: https://postgr.es/m/20210413123139.GE6091@telsasoft.com
The patch needs test cases, reorganization, and cfbot testing.
Technically reverts commits 5c31afc49d..e35b2bad1a (exclusive/inclusive)
and 08db7c63f3..ccbe34139b.
Reported-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/E1ktAAG-0002V2-VB@gemulon.postgresql.org
This adds a key management system that stores (currently) two data
encryption keys of length 128, 192, or 256 bits. The data keys are
AES256 encrypted using a key encryption key, and validated via GCM
cipher mode. A command to obtain the key encryption key must be
specified at initdb time, and will be run at every database server
start. New parameters allow a file descriptor open to the terminal to
be passed. pg_upgrade support has also been added.
Discussion: https://postgr.es/m/CA+fd4k7q5o6Nc_AaX6BcYM9yqTbC6_pnH-6nSD=54Zp6NBQTCQ@mail.gmail.com
Discussion: https://postgr.es/m/20201202213814.GG20285@momjian.us
Author: Masahiko Sawada, me, Stephen Frost
Up to now, we sent a ParameterStatus message to the client immediately
upon any change in the active value of any GUC_REPORT variable. This
was only barely okay when the feature was designed; now that we have
things like function SET clauses, there are very plausible use-cases
where a GUC_REPORT variable might change many times within a query
--- and even end up back at its original value, perhaps. Fortunately
most of our GUC_REPORT variables are unlikely to be changed often;
but there are proposals in play to enlarge that set, or even make it
user-configurable.
Hence, let's fix things to not generate more than one ParameterStatus
message per variable per query, and to not send any message at all
unless the end-of-query value is different from what we last reported.
Discussion: https://postgr.es/m/5708.1601145259@sss.pgh.pa.us
Query planning is affected by a number of configuration options, and it
may be crucial to know which of those options were set to non-default
values. With this patch you can say EXPLAIN (SETTINGS ON) to include
that information in the query plan. Only options affecting planning,
with values different from the built-in default are printed.
This patch also adds auto_explain.log_settings option, providing the
same capability in auto_explain module.
Author: Tomas Vondra
Reviewed-by: Rafia Sabih, John Naylor
Discussion: https://postgr.es/m/e1791b4c-df9c-be02-edc5-7c8874944be0@2ndquadrant.com
recovery.conf settings are now set in postgresql.conf (or other GUC
sources). Currently, all the affected settings are PGC_POSTMASTER;
this could be refined in the future case by case.
Recovery is now initiated by a file recovery.signal. Standby mode is
initiated by a file standby.signal. The standby_mode setting is
gone. If a recovery.conf file is found, an error is issued.
The trigger_file setting has been renamed to promote_trigger_file as
part of the move.
The documentation chapter "Recovery Configuration" has been integrated
into "Server Configuration".
pg_basebackup -R now appends settings to postgresql.auto.conf and
creates a standby.signal file.
Author: Fujii Masao <masao.fujii@gmail.com>
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Abhijit Menon-Sen <ams@2ndquadrant.com>
Author: Sergei Kornilov <sk@zsrv.org>
Discussion: https://www.postgresql.org/message-id/flat/607741529606767@web3g.yandex.ru/
Split the "Authentication and Security" section into two separate
sections "Authentication" and "SSL". The latter part has gotten much
longer over time, and doesn't primarily have to do with authentication.
Also, the row_security parameter was inconsistently categorized, so
clean that up while we're here.
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
This commit also does
- add REPLICATION_SUBSCRIBERS into config_group
- mark max_logical_replication_workers and max_sync_workers_per_subscription
as REPLICATION_SUBSCRIBERS parameters
- move those parameters into "Subscribers" section in postgresql.conf.sample
Author: Masahiko Sawada, Petr Jelinek and me
Reported-by: Masahiko Sawada
Discussion: http://postgr.es/m/CAD21AoAonSCoa=v=87ZO3vhfUZA1k_E2XRNHTt=xioWGUa+0ug@mail.gmail.com
This is like shared_preload_libraries except that it takes effect at
backend start and can be changed without a full postmaster restart. It
is like local_preload_libraries except that it is still only settable by
a superuser. This can be a better way to load modules such as
auto_explain.
Since there are now three preload parameters, regroup the documentation
a bit. Put all parameters into one section, explain common
functionality only once, update the descriptions to reflect current and
future realities.
Reviewed-by: Dimitri Fontaine <dimitri@2ndQuadrant.fr>
We used to just remember the GucSource, but saving GucContext too provides
a little more information --- notably, whether a SET was done by a
superuser or regular user. This allows us to rip out the fairly dodgy code
that define_custom_variable used to use to try to infer the context to
re-install a pre-existing setting with. In particular, it now works for
a superuser to SET a extension's SUSET custom variable before loading the
associated extension, because GUC can remember whether the SET was done as
a superuser or not. The plperl regression tests contain an example where
this is useful.
Per discussion, this structure seems more understandable than what was
there before. Make config.sgml and postgresql.conf.sample agree.
In passing do a bit of editorial work on the variable descriptions.
The previous functions of assign hooks are now split between check hooks
and assign hooks, where the former can fail but the latter shouldn't.
Aside from being conceptually clearer, this approach exposes the
"canonicalized" form of the variable value to guc.c without having to do
an actual assignment. And that lets us fix the problem recently noted by
Bernd Helmle that the auto-tune patch for wal_buffers resulted in bogus
log messages about "parameter "wal_buffers" cannot be changed without
restarting the server". There may be some speed advantage too, because
this design lets hook functions avoid re-parsing variable values when
restoring a previous state after a rollback (they can store a pre-parsed
representation of the value instead). This patch also resolves a
longstanding annoyance about custom error messages from variable assign
hooks: they should modify, not appear separately from, guc.c's own message
about "invalid parameter value".
Normally, we automatically restart after a backend crash, but in some
cases when PostgreSQL is invoked by clusterware it may be desirable to
suppress this behavior, so we provide an option which does this.
Since no existing GUC group quite fits, create a new group called
"error handling options" for this and the previously undocumented GUC
exit_on_error, which is now documented.
Review by Fujii Masao.
description for vacuum_defer_cleanup_age to the correct category.
Sections in postgresql.conf are also sorted in the same order with docs.
Per gripe by Fujii Masao, suggestion by Heikki Linnakangas, and patch by me.
This includes two new kinds of postmaster processes, walsenders and
walreceiver. Walreceiver is responsible for connecting to the primary server
and streaming WAL to disk, while walsender runs in the primary server and
streams WAL from disk to the client.
Documentation still needs work, but the basics are there. We will probably
pull the replication section to a new chapter later on, as well as the
sections describing file-based replication. But let's do that as a separate
patch, so that it's easier to see what has been added/changed. This patch
also adds a new section to the chapter about FE/BE protocol, documenting the
protocol used by walsender/walreceivxer.
Bump catalog version because of two new functions,
pg_last_xlog_receive_location() and pg_last_xlog_replay_location(), for
monitoring the progress of replication.
Fujii Masao, with additional hacking by me
* Refactor explain.c slightly to export a convenient-to-use subroutine
for printing EXPLAIN results.
* Provide hooks for plugins to get control at ExecutorStart and ExecutorEnd
as well as ExecutorRun.
* Add some minimal support for tracking the total runtime of ExecutorRun.
This code won't actually do anything unless a plugin prods it to.
* Change the API of the DefineCustomXXXVariable functions to allow nonzero
"flags" to be specified for a custom GUC variable. While at it, also make
the "bootstrap" default value for custom GUCs be explicitly specified as a
parameter to these functions. This is to eliminate confusion over where the
default comes from, as has been expressed in the past by some users of the
custom-variable facility.
* Refactor GUC code a bit to ensure that a custom variable gets initialized to
something valid (like its default value) even if the placeholder value was
invalid.
free space information is stored in a dedicated FSM relation fork, with each
relation (except for hash indexes; they don't use FSM).
This eliminates the max_fsm_relations and max_fsm_pages GUC options; remove any
trace of them from the backend, initdb, and documentation.
Rewrite contrib/pg_freespacemap to match the new FSM implementation. Also
introduce a new variant of the get_raw_page(regclass, int4, int4) function in
contrib/pageinspect that let's you to return pages from any relation fork, and
a new fsm_page_contents() function to inspect the new FSM pages.
