Commit 9e6104c66 disallowed transition tables on foreign tables, but
failed to account for cases where a foreign table is a child table of a
partitioned/inherited table on which transition tables exist, leading to
incorrect transition tuples collected from such foreign tables for
queries on the parent table triggering transition capture. This
occurred not only for inherited UPDATE/DELETE but for partitioned INSERT
later supported by commit 3d956d956, which should have handled it at
least for the INSERT case, but didn't.
To fix, modify ExecAR*Triggers to throw an error if the given relation
is a foreign table requesting transition capture. Also, this commit
fixes make_modifytable so that in case of an inherited UPDATE/DELETE
triggering transition capture, FDWs choose normal operations to modify
child foreign tables, not DirectModify; which is needed because they
would otherwise skip the calls to ExecAR*Triggers at execution, causing
unexpected behavior.
Author: Etsuro Fujita <etsuro.fujita@gmail.com>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CAPmGK14QJYikKzBDCe3jMbpGENnQ7popFmbEgm-XTNuk55oyHg%40mail.gmail.com
Backpatch-through: 13
We are capable of optimizing MIN() and MAX() aggregates on indexed
columns into subqueries that exploit the index, rather than the normal
thing of scanning the whole table. When we do this, we replace the
Aggref node(s) with Params referencing subquery outputs. Such Params
really ought to be included in the per-plan-node extParam/allParam
sets computed by SS_finalize_plan. However, we've never done so
up to now because of an ancient implementation choice to perform
that substitution during set_plan_references, which runs after
SS_finalize_plan, so that SS_finalize_plan never sees these Params.
The cleanest fix would be to perform a separate tree walk to do
these substitutions before SS_finalize_plan runs. That seems
unattractive, first because a whole-tree mutation pass is expensive,
and second because we lack infrastructure for visiting expression
subtrees in a Plan tree, so that we'd need a new function knowing
as much as SS_finalize_plan knows about that. I also considered
swapping the order of SS_finalize_plan and set_plan_references,
but that fell foul of various assumptions that seem tricky to fix.
So the approach adopted here is to teach SS_finalize_plan itself
to check for such Aggrefs. I refactored things a bit in setrefs.c
to avoid having three copies of the code that does that.
Back-patch of v17 commits d0d44049d and 779ac2c74. When d0d44049d
went in, there was no evidence that it was fixing a reachable bug,
so I refrained from back-patching. Now we have such evidence.
Per bug #18465 from Hal Takahara. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/18465-2fae927718976b22@postgresql.org
Discussion: https://postgr.es/m/2391880.1689025003@sss.pgh.pa.us
contain_mutable_functions and contain_volatile_functions give
reliable answers only after expression preprocessing (specifically
eval_const_expressions). Some places understand this, but some did
not get the memo --- which is not entirely their fault, because the
problem is documented only in places far away from those functions.
Introduce wrapper functions that allow doing the right thing easily,
and add commentary in hopes of preventing future mistakes from
copy-and-paste of code that's only conditionally safe.
Two actual bugs of this ilk are fixed here. We failed to preprocess
column GENERATED expressions before checking mutability, so that the
code could fail to detect the use of a volatile function
default-argument expression, or it could reject a polymorphic function
that is actually immutable on the datatype of interest. Likewise,
column DEFAULT expressions weren't preprocessed before determining if
it's safe to apply the attmissingval mechanism. A false negative
would just result in an unnecessary table rewrite, but a false
positive could allow the attmissingval mechanism to be used in a case
where it should not be, resulting in unexpected initial values in a
new column.
In passing, re-order the steps in ComputePartitionAttrs so that its
checks for invalid column references are done before applying
expression_planner, rather than after. The previous coding would
not complain if a partition expression contains a disallowed column
reference that gets optimized away by constant folding, which seems
to me to be a behavior we do not want.
Per bug #18097 from Jim Keener. Back-patch to all supported versions.
Discussion: https://postgr.es/m/18097-ebb179674f22932f@postgresql.org
Commit e7cb7ee14, which introduced the infrastructure for FDWs and
custom scan providers to replace joins with scans, failed to add support
handling of pseudoconstant quals assigned to replaced joins in
createplan.c, leading to an incorrect plan without a gating Result node
when postgres_fdw replaced a join with such a qual.
To fix, we could add the support by 1) modifying the ForeignPath and
CustomPath structs to store the list of RestrictInfo nodes to apply to
the join, as in JoinPaths, if they represent foreign and custom scans
replacing a join with a scan, and by 2) modifying create_scan_plan() in
createplan.c to use that list in that case, instead of the
baserestrictinfo list, to get pseudoconstant quals assigned to the join;
but #1 would cause an ABI break. So fix by modifying the infrastructure
to just disallow replacing joins with such quals.
Back-patch to all supported branches.
Reported by Nishant Sharma. Patch by me, reviewed by Nishant Sharma and
Richard Guo.
Discussion: https://postgr.es/m/CADrsxdbcN1vejBaf8a%2BQhrZY5PXL-04mCd4GDu6qm6FigDZd6Q%40mail.gmail.com
We were identifying the updatable generated columns of inheritance
children by transposing the calculation made for their parent.
However, there's nothing that says a traditional-inheritance child
can't have generated columns that aren't there in its parent, or that
have different dependencies than are in the parent's expression.
(At present it seems that we don't enforce that for partitioning
either, which is likely wrong to some degree or other; but the case
clearly needs to be handled with traditional inheritance.)
Hence, drop the very-klugy-anyway "extraUpdatedCols" RTE field
in favor of identifying which generated columns depend on updated
columns during executor startup. In HEAD we can remove
extraUpdatedCols altogether; in back branches, it's still there but
always empty. Another difference between the HEAD and back-branch
versions of this patch is that in HEAD we can add the new bitmap field
to ResultRelInfo, but that would cause an ABI break in back branches.
Like 4b3e37993, add a List field at the end of struct EState instead.
Back-patch to v13. The bogus calculation is also being made in v12,
but it doesn't have the same visible effect because we don't use it
to decide which generated columns to recalculate; as a consequence of
which the patch doesn't apply easily. I think that there might still
be a demonstrable bug associated with trigger firing conditions, but
that's such a weird corner-case usage that I'm content to leave it
unfixed in v12.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/CA+HiwqFshLKNvQUd1DgwJ-7tsTp=dwv7KZqXC4j2wYBV1aCDUA@mail.gmail.com
Discussion: https://postgr.es/m/2793383.1672944799@sss.pgh.pa.us
This reverts commit db0d67db24 and
several follow-on fixes. The idea of making a cost-based choice
of the order of the sorting columns is not fundamentally unsound,
but it requires cost information and data statistics that we don't
really have. For example, relying on procost to distinguish the
relative costs of different sort comparators is pretty pointless
so long as most such comparator functions are labeled with cost 1.0.
Moreover, estimating the number of comparisons done by Quicksort
requires more than just an estimate of the number of distinct values
in the input: you also need some idea of the sizes of the larger
groups, if you want an estimate that's good to better than a factor of
three or so. That's data that's often unknown or not very reliable.
Worse, to arrive at estimates of the number of calls made to the
lower-order-column comparison functions, the code needs to make
estimates of the numbers of distinct values of multiple columns,
which are necessarily even less trustworthy than per-column stats.
Even if all the inputs are perfectly reliable, the cost algorithm
as-implemented cannot offer useful information about how to order
sorting columns beyond the point at which the average group size
is estimated to drop to 1.
Close inspection of the code added by db0d67db2 shows that there
are also multiple small bugs. These could have been fixed, but
there's not much point if we don't trust the estimates to be
accurate in-principle.
Finally, the changes in cost_sort's behavior made for very large
changes (often a factor of 2 or so) in the cost estimates for all
sorting operations, not only those for multi-column GROUP BY.
That naturally changes plan choices in many situations, and there's
precious little evidence to show that the changes are for the better.
Given the above doubts about whether the new estimates are really
trustworthy, it's hard to summon much confidence that these changes
are better on the average.
Since we're hard up against the release deadline for v15, let's
revert these changes for now. We can always try again later.
Note: in v15, I left T_PathKeyInfo in place in nodes.h even though
it's unreferenced. Removing it would be an ABI break, and it seems
a bit late in the release cycle for that.
Discussion: https://postgr.es/m/TYAPR01MB586665EB5FB2C3807E893941F5579@TYAPR01MB5866.jpnprd01.prod.outlook.com
Commit fac1b470a thought we could check for set-returning functions
by testing only the top-level node in an expression tree. This is
wrong in itself, and to make matters worse it encouraged others
to make the same mistake, by exporting tlist.c's special-purpose
IS_SRF_CALL() as a widely-visible macro. I can't find any evidence
that anyone's taken the bait, but it was only a matter of time.
Use expression_returns_set() instead, and stuff the IS_SRF_CALL()
genie back in its bottle, this time with a warning label. I also
added a couple of cross-reference comments.
After a fair amount of fooling around, I've despaired of making
a robust test case that exposes the bug reliably, so no test case
here. (Note that the test case added by fac1b470a is itself
broken, in that it doesn't notice if you remove the code change.
The repro given by the bug submitter currently doesn't fail either
in v15 or HEAD, though I suspect that may indicate an unrelated bug.)
Per bug #17564 from Martijn van Oosterhout. Back-patch to v13,
as the faulty patch was.
Discussion: https://postgr.es/m/17564-c7472c2f90ef2da3@postgresql.org
Noticed while working in this area. This code was introduced in PG15,
which is still in beta, so backpatch to there for consistency.
Backpatch-through: 15
Several places in the planner tried to clamp a double value to fit
in a "long" by doing
(long) Min(x, (double) LONG_MAX);
This is subtly incorrect, because it casts LONG_MAX to double and
potentially back again. If long is 64 bits then the double value
is inexact, and the platform might round it up to LONG_MAX+1
resulting in an overflow and an undesirably negative output.
While it's not hard to rewrite the expression into a safe form,
let's put it into a common function to reduce the risk of someone
doing it wrong in future.
In principle this is a bug fix, but since the problem could only
manifest with group count estimates exceeding 2^63, it seems unlikely
that anyone has actually hit this or will do so anytime soon. We're
fixing it mainly to satisfy fuzzer-type tools. That being the case,
a HEAD-only fix seems sufficient.
Andrey Lepikhov
Discussion: https://postgr.es/m/ebbc2efb-7ef9-bf2f-1ada-d6ec48f70e58@postgrespro.ru
Up until now, we've had a policy of only marking certain variables
in the PostgreSQL header files with PGDLLIMPORT, but now we've
decided to mark them all. This means that extensions running on
Windows should no longer operate at a disadvantage as compared to
extensions running on Linux: if the variable is present in a header
file, it should be accessible.
Discussion: http://postgr.es/m/CA+TgmoYanc1_FSfimhgiWSqVyP5KKmh5NP2BWNwDhO8Pg2vGYQ@mail.gmail.com
Window functions such as row_number() always return a value higher than
the previously returned value for tuples in any given window partition.
Traditionally queries such as;
SELECT * FROM (
SELECT *, row_number() over (order by c) rn
FROM t
) t WHERE rn <= 10;
were executed fairly inefficiently. Neither the query planner nor the
executor knew that once rn made it to 11 that nothing further would match
the outer query's WHERE clause. It would blindly continue until all
tuples were exhausted from the subquery.
Here we implement means to make the above execute more efficiently.
This is done by way of adding a pg_proc.prosupport function to various of
the built-in window functions and adding supporting code to allow the
support function to inform the planner if the window function is
monotonically increasing, monotonically decreasing, both or neither. The
planner is then able to make use of that information and possibly allow
the executor to short-circuit execution by way of adding a "run condition"
to the WindowAgg to allow it to determine if some of its execution work
can be skipped.
This "run condition" is not like a normal filter. These run conditions
are only built using quals comparing values to monotonic window functions.
For monotonic increasing functions, quals making use of the btree
operators for <, <= and = can be used (assuming the window function column
is on the left). You can see here that once such a condition becomes false
that a monotonic increasing function could never make it subsequently true
again. For monotonically decreasing functions the >, >= and = btree
operators for the given type can be used for run conditions.
The best-case situation for this is when there is a single WindowAgg node
without a PARTITION BY clause. Here when the run condition becomes false
the WindowAgg node can simply return NULL. No more tuples will ever match
the run condition. It's a little more complex when there is a PARTITION
BY clause. In this case, we cannot return NULL as we must still process
other partitions. To speed this case up we pull tuples from the outer
plan to check if they're from the same partition and simply discard them
if they are. When we find a tuple belonging to another partition we start
processing as normal again until the run condition becomes false or we run
out of tuples to process.
When there are multiple WindowAgg nodes to evaluate then this complicates
the situation. For intermediate WindowAggs we must ensure we always
return all tuples to the calling node. Any filtering done could lead to
incorrect results in WindowAgg nodes above. For all intermediate nodes,
we can still save some work when the run condition becomes false. We've
no need to evaluate the WindowFuncs anymore. Other WindowAgg nodes cannot
reference the value of these and these tuples will not appear in the final
result anyway. The savings here are small in comparison to what can be
saved in the top-level WingowAgg, but still worthwhile.
Intermediate WindowAgg nodes never filter out tuples, but here we change
WindowAgg so that the top-level WindowAgg filters out tuples that don't
match the intermediate WindowAgg node's run condition. Such filters
appear in the "Filter" clause in EXPLAIN for the top-level WindowAgg node.
Here we add prosupport functions to allow the above to work for;
row_number(), rank(), dense_rank(), count(*) and count(expr). It appears
technically possible to do the same for min() and max(), however, it seems
unlikely to be useful enough, so that's not done here.
Bump catversion
Author: David Rowley
Reviewed-by: Andy Fan, Zhihong Yu
Discussion: https://postgr.es/m/CAApHDvqvp3At8++yF8ij06sdcoo1S_b2YoaT9D4Nf+MObzsrLQ@mail.gmail.com
In commit 27e1f1456, create_append_plan() only allowed the subplan
created from a given subpath to be executed asynchronously when it was
an async-capable ForeignPath. To extend coverage, this patch handles
cases when the given subpath includes some other Path types as well that
can be omitted in the plan processing, such as a ProjectionPath directly
atop an async-capable ForeignPath, allowing asynchronous execution in
partitioned-scan/partitioned-join queries with non-Var tlist expressions
and more UNION queries.
Andrey Lepikhov and Etsuro Fujita, reviewed by Alexander Pyhalov and
Zhihong Yu.
Discussion: https://postgr.es/m/659c37a8-3e71-0ff2-394c-f04428c76f08%40postgrespro.ru
postgres_fdw would push ORDER BY clauses to the remote side without
verifying that the sort operator is safe to ship. Moreover, it failed
to print a suitable USING clause if the sort operator isn't default
for the sort expression's type. The net result of this is that the
remote sort might not have anywhere near the semantics we expect,
which'd be disastrous for locally-performed merge joins in particular.
We addressed similar issues in the context of ORDER BY within an
aggregate function call in commit 7012b132d, but failed to notice
that query-level ORDER BY was broken. Thus, much of the necessary
logic already existed, but it requires refactoring to be usable
in both cases.
Back-patch to all supported branches. In HEAD only, remove the
core code's copy of find_em_expr_for_rel, which is no longer used
and really should never have been pushed into equivclass.c in the
first place.
Ronan Dunklau, per report from David Rowley;
reviews by David Rowley, Ranier Vilela, and myself
Discussion: https://postgr.es/m/CAApHDvr4OeC2DBVY--zVP83-K=bYrTD7F8SZDhN4g+pj2f2S-A@mail.gmail.com
When evaluating a query with a multi-column GROUP BY clause using sort,
the cost may be heavily dependent on the order in which the keys are
compared when building the groups. Grouping does not imply any ordering,
so we're allowed to compare the keys in arbitrary order, and a Hash Agg
leverages this. But for Group Agg, we simply compared keys in the order
as specified in the query. This commit explores alternative ordering of
the keys, trying to find a cheaper one.
In principle, we might generate grouping paths for all permutations of
the keys, and leave the rest to the optimizer. But that might get very
expensive, so we try to pick only a couple interesting orderings based
on both local and global information.
When planning the grouping path, we explore statistics (number of
distinct values, cost of the comparison function) for the keys and
reorder them to minimize comparison costs. Intuitively, it may be better
to perform more expensive comparisons (for complex data types etc.)
last, because maybe the cheaper comparisons will be enough. Similarly,
the higher the cardinality of a key, the lower the probability we’ll
need to compare more keys. The patch generates and costs various
orderings, picking the cheapest ones.
The ordering of group keys may interact with other parts of the query,
some of which may not be known while planning the grouping. E.g. there
may be an explicit ORDER BY clause, or some other ordering-dependent
operation, higher up in the query, and using the same ordering may allow
using either incremental sort or even eliminate the sort entirely.
The patch generates orderings and picks those minimizing the comparison
cost (for various pathkeys), and then adds orderings that might be
useful for operations higher up in the plan (ORDER BY, etc.). Finally,
it always keeps the ordering specified in the query, on the assumption
the user might have additional insights.
This introduces a new GUC enable_group_by_reordering, so that the
optimization may be disabled if needed.
The original patch was proposed by Teodor Sigaev, and later improved and
reworked by Dmitry Dolgov. Reviews by a number of people, including me,
Andrey Lepikhov, Claudio Freire, Ibrar Ahmed and Zhihong Yu.
Author: Dmitry Dolgov, Teodor Sigaev, Tomas Vondra
Reviewed-by: Tomas Vondra, Andrey Lepikhov, Claudio Freire, Ibrar Ahmed, Zhihong Yu
Discussion: https://postgr.es/m/7c79e6a5-8597-74e8-0671-1c39d124c9d6%40sigaev.ru
Discussion: https://postgr.es/m/CA%2Bq6zcW_4o2NC0zutLkOJPsFt80megSpX_dVRo6GK9PC-Jx_Ag%40mail.gmail.com
MERGE performs actions that modify rows in the target table using a
source table or query. MERGE provides a single SQL statement that can
conditionally INSERT/UPDATE/DELETE rows -- a task that would otherwise
require multiple PL statements. For example,
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular tables, partitioned tables and inheritance
hierarchies, including column and row security enforcement, as well as
support for row and statement triggers and transition tables therein.
MERGE is optimized for OLTP and is parameterizable, though also useful
for large scale ETL/ELT. MERGE is not intended to be used in preference
to existing single SQL commands for INSERT, UPDATE or DELETE since there
is some overhead. MERGE can be used from PL/pgSQL.
MERGE does not support targetting updatable views or foreign tables, and
RETURNING clauses are not allowed either. These limitations are likely
fixable with sufficient effort. Rewrite rules are also not supported,
but it's not clear that we'd want to support them.
Author: Pavan Deolasee <pavan.deolasee@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Simon Riggs <simon.riggs@enterprisedb.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier versions)
Reviewed-by: Peter Geoghegan <pg@bowt.ie> (earlier versions)
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Reviewed-by: Japin Li <japinli@hotmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
Discussion: https://postgr.es/m/20201231134736.GA25392@alvherre.pgsql
Up to now, the planner estimated the size of a recursive query's
worktable as 10 times the size of the non-recursive term. It's hard
to see how to do significantly better than that automatically, but
we can give users control over the multiplier to allow tuning for
specific use-cases. The default behavior remains the same.
Simon Riggs
Discussion: https://postgr.es/m/CANbhV-EuaLm4H3g0+BSTYHEGxJj3Kht0R+rJ8vT57Dejnh=_nA@mail.gmail.com
Standardize on xoroshiro128** as our basic PRNG algorithm, eliminating
a bunch of platform dependencies as well as fundamentally-obsolete PRNG
code. In addition, this API replacement will ease replacing the
algorithm again in future, should that become necessary.
xoroshiro128** is a few percent slower than the drand48 family,
but it can produce full-width 64-bit random values not only 48-bit,
and it should be much more trustworthy. It's likely to be noticeably
faster than the platform's random(), depending on which platform you
are thinking about; and we can have non-global state vectors easily,
unlike with random(). It is not cryptographically strong, but neither
are the functions it replaces.
Fabien Coelho, reviewed by Dean Rasheed, Aleksander Alekseev, and myself
Discussion: https://postgr.es/m/alpine.DEB.2.22.394.2105241211230.165418@pseudo
It's possible that a subplan below a Memoize node contains a parameter
from above the Memoize node. If this parameter changes then cache entries
may become out-dated due to the new parameter value.
Previously Memoize was mistakenly not aware of this. We fix this here by
flushing the cache whenever a parameter that's not part of the cache
key changes.
Bug: #17213
Reported by: Elvis Pranskevichus
Author: David Rowley
Discussion: https://postgr.es/m/17213-988ed34b225a2862@postgresql.org
Backpatch-through: 14, where Memoize was added
It's possible that a subplan below a Memoize node contains a parameter
from above the Memoize node. If this parameter changes then cache entries
may become out-dated due to the new parameter value.
Previously Memoize was mistakenly not aware of this. We fix this here by
flushing the cache whenever a parameter that's not part of the cache
key changes.
Bug: #17213
Reported by: Elvis Pranskevichus
Author: David Rowley
Discussion: https://postgr.es/m/17213-988ed34b225a2862@postgresql.org
Backpatch-through: 14, where Memoize was added
Memoize would always use the hash equality operator for the cache key
types to determine if the current set of parameters were the same as some
previously cached set. Certain types such as floating points where -0.0
and +0.0 differ in their binary representation but are classed as equal by
the hash equality operator may cause problems as unless the join uses the
same operator it's possible that whichever join operator is being used
would be able to distinguish the two values. In which case we may
accidentally return in the incorrect rows out of the cache.
To fix this here we add a binary mode to Memoize to allow it to the
current set of parameters to previously cached values by comparing
bit-by-bit rather than logically using the hash equality operator. This
binary mode is always used for LATERAL joins and it's used for normal
joins when any of the join operators are not hashable.
Reported-by: Tom Lane
Author: David Rowley
Discussion: https://postgr.es/m/3004308.1632952496@sss.pgh.pa.us
Backpatch-through: 14, where Memoize was added
"Result Cache" was never a great name for this node, but nobody managed
to come up with another name that anyone liked enough. That was until
David Johnston mentioned "Node Memoization", which Tom Lane revised to
just "Memoize". People seem to like "Memoize", so let's do the rename.
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/20210708165145.GG1176@momjian.us
Backpatch-through: 14, where Result Cache was introduced
Commit 2453ea142 redefined pg_proc.proargtypes to include the types of
OUT parameters, for procedures only. While that had some advantages
for implementing the SQL-spec behavior of DROP PROCEDURE, it was pretty
disastrous from a number of other perspectives. Notably, since the
primary key of pg_proc is name + proargtypes, this made it possible to
have multiple procedures with identical names + input arguments and
differing output argument types. That would make it impossible to call
any one of the procedures by writing just NULL (or "?", or any other
data-type-free notation) for the output argument(s). The change also
seems likely to cause grave confusion for client applications that
examine pg_proc and expect the traditional definition of proargtypes.
Hence, revert the definition of proargtypes to what it was, and
undo a number of complications that had been added to support that.
To support the SQL-spec behavior of DROP PROCEDURE, when there are
no argmode markers in the command's parameter list, we perform the
lookup both ways (that is, matching against both proargtypes and
proallargtypes), succeeding if we get just one unique match.
In principle this could result in ambiguous-function failures
that would not happen when using only one of the two rules.
However, overloading of procedure names is thought to be a pretty
rare usage, so this shouldn't cause many problems in practice.
Postgres-specific code such as pg_dump can defend against any
possibility of such failures by being careful to specify argmodes
for all procedure arguments.
This also fixes a few other bugs in the area of CALL statements
with named parameters, and improves the documentation a little.
catversion bump forced because the representation of procedures
with OUT arguments changes.
Discussion: https://postgr.es/m/3742981.1621533210@sss.pgh.pa.us
It's unusual to have any resjunk columns in an ON CONFLICT ... UPDATE
list, but it can happen when MULTIEXPR_SUBLINK SubPlans are present.
If it happens, the ON CONFLICT UPDATE code path would end up storing
tuples that include the values of the extra resjunk columns. That's
fairly harmless in the short run, but if new columns are added to
the table then the values would become accessible, possibly leading
to malfunctions if they don't match the datatypes of the new columns.
This had escaped notice through a confluence of missing sanity checks,
including
* There's no cross-check that a tuple presented to heap_insert or
heap_update matches the table rowtype. While it's difficult to
check that fully at reasonable cost, we can easily add assertions
that there aren't too many columns.
* The output-column-assignment cases in execExprInterp.c lacked
any sanity checks on the output column numbers, which seems like
an oversight considering there are plenty of assertion checks on
input column numbers. Add assertions there too.
* We failed to apply nodeModifyTable's ExecCheckPlanOutput() to
the ON CONFLICT UPDATE tlist. That wouldn't have caught this
specific error, since that function is chartered to ignore resjunk
columns; but it sure seems like a bad omission now that we've seen
this bug.
In HEAD, the right way to fix this is to make the processing of
ON CONFLICT UPDATE tlists work the same as regular UPDATE tlists
now do, that is don't add "SET x = x" entries, and use
ExecBuildUpdateProjection to evaluate the tlist and combine it with
old values of the not-set columns. This adds a little complication
to ExecBuildUpdateProjection, but allows removal of a comparable
amount of now-dead code from the planner.
In the back branches, the most expedient solution seems to be to
(a) use an output slot for the ON CONFLICT UPDATE projection that
actually matches the target table, and then (b) invent a variant of
ExecBuildProjectionInfo that can be told to not store values resulting
from resjunk columns, so it doesn't try to store into nonexistent
columns of the output slot. (We can't simply ignore the resjunk columns
altogether; they have to be evaluated for MULTIEXPR_SUBLINK to work.)
This works back to v10. In 9.6, projections work much differently and
we can't cheaply give them such an option. The 9.6 version of this
patch works by inserting a JunkFilter when it's necessary to get rid
of resjunk columns.
In addition, v11 and up have the reverse problem when trying to
perform ON CONFLICT UPDATE on a partitioned table. Through a
further oversight, adjust_partition_tlist() discarded resjunk columns
when re-ordering the ON CONFLICT UPDATE tlist to match a partition.
This accidentally prevented the storing-bogus-tuples problem, but
at the cost that MULTIEXPR_SUBLINK cases didn't work, typically
crashing if more than one row has to be updated. Fix by preserving
resjunk columns in that routine. (I failed to resist the temptation
to add more assertions there too, and to do some minor code
beautification.)
Per report from Andres Freund. Back-patch to all supported branches.
Security: CVE-2021-32028
I didn't particularly like this function name, as it fails to
express what's going on. Also, returning the sort expression
alone isn't too helpful --- typically, a caller would also
need some other fields of the EquivalenceMember. But the
sole caller really only needs a bool result, so let's make
it "bool relation_can_be_sorted_early()".
Discussion: https://postgr.es/m/91f3ec99-85a4-fa55-ea74-33f85a5c651f@swarm64.com
An oversight introduced by the incremental-sort patches caused
"could not find pathkey item to sort" errors in some situations
where a sort key involves an aggregate or window function.
The basic problem here is that find_em_expr_usable_for_sorting_rel
isn't properly modeling what prepare_sort_from_pathkeys will do
later. Rather than hoping we can keep those functions in sync,
let's refactor so that they actually share the code for
identifying a suitable sort expression.
With this refactoring, tlist.c's tlist_member_ignore_relabel
is unused. I removed it in HEAD but left it in place in v13,
in case any extensions are using it.
Per report from Luc Vlaming. Back-patch to v13 where the
problem arose.
James Coleman and Tom Lane
Discussion: https://postgr.es/m/91f3ec99-85a4-fa55-ea74-33f85a5c651f@swarm64.com
ScalarArrayOpExprs with "useOr=true" and a set of Consts on the righthand
side have traditionally been evaluated by using a linear search over the
array. When these arrays contain large numbers of elements then this
linear search could become a significant part of execution time.
Here we add a new method of evaluating ScalarArrayOpExpr expressions to
allow them to be evaluated by first building a hash table containing each
element, then on subsequent evaluations, we just probe that hash table to
determine if there is a match.
The planner is in charge of determining when this optimization is possible
and it enables it by setting hashfuncid in the ScalarArrayOpExpr. The
executor will only perform the hash table evaluation when the hashfuncid
is set.
This means that not all cases are optimized. For example CHECK constraints
containing an IN clause won't go through the planner, so won't get the
hashfuncid set. We could maybe do something about that at some later
date. The reason we're not doing it now is from fear that we may slow
down cases where the expression is evaluated only once. Those cases can
be common, for example, a single row INSERT to a table with a CHECK
constraint containing an IN clause.
In the planner, we enable this when there are suitable hash functions for
the ScalarArrayOpExpr's operator and only when there is at least
MIN_ARRAY_SIZE_FOR_HASHED_SAOP elements in the array. The threshold is
currently set to 9.
Author: James Coleman, David Rowley
Reviewed-by: David Rowley, Tomas Vondra, Heikki Linnakangas
Discussion: https://postgr.es/m/CAAaqYe8x62+=wn0zvNKCj55tPpg-JBHzhZFFc6ANovdqFw7-dA@mail.gmail.com
Here we add a new executor node type named "Result Cache". The planner
can include this node type in the plan to have the executor cache the
results from the inner side of parameterized nested loop joins. This
allows caching of tuples for sets of parameters so that in the event that
the node sees the same parameter values again, it can just return the
cached tuples instead of rescanning the inner side of the join all over
again. Internally, result cache uses a hash table in order to quickly
find tuples that have been previously cached.
For certain data sets, this can significantly improve the performance of
joins. The best cases for using this new node type are for join problems
where a large portion of the tuples from the inner side of the join have
no join partner on the outer side of the join. In such cases, hash join
would have to hash values that are never looked up, thus bloating the hash
table and possibly causing it to multi-batch. Merge joins would have to
skip over all of the unmatched rows. If we use a nested loop join with a
result cache, then we only cache tuples that have at least one join
partner on the outer side of the join. The benefits of using a
parameterized nested loop with a result cache increase when there are
fewer distinct values being looked up and the number of lookups of each
value is large. Also, hash probes to lookup the cache can be much faster
than the hash probe in a hash join as it's common that the result cache's
hash table is much smaller than the hash join's due to result cache only
caching useful tuples rather than all tuples from the inner side of the
join. This variation in hash probe performance is more significant when
the hash join's hash table no longer fits into the CPU's L3 cache, but the
result cache's hash table does. The apparent "random" access of hash
buckets with each hash probe can cause a poor L3 cache hit ratio for large
hash tables. Smaller hash tables generally perform better.
The hash table used for the cache limits itself to not exceeding work_mem
* hash_mem_multiplier in size. We maintain a dlist of keys for this cache
and when we're adding new tuples and realize we've exceeded the memory
budget, we evict cache entries starting with the least recently used ones
until we have enough memory to add the new tuples to the cache.
For parameterized nested loop joins, we now consider using one of these
result cache nodes in between the nested loop node and its inner node. We
determine when this might be useful based on cost, which is primarily
driven off of what the expected cache hit ratio will be. Estimating the
cache hit ratio relies on having good distinct estimates on the nested
loop's parameters.
For now, the planner will only consider using a result cache for
parameterized nested loop joins. This works for both normal joins and
also for LATERAL type joins to subqueries. It is possible to use this new
node for other uses in the future. For example, to cache results from
correlated subqueries. However, that's not done here due to some
difficulties obtaining a distinct estimation on the outer plan to
calculate the estimated cache hit ratio. Currently we plan the inner plan
before planning the outer plan so there is no good way to know if a result
cache would be useful or not since we can't estimate the number of times
the subplan will be called until the outer plan is generated.
The functionality being added here is newly introducing a dependency on
the return value of estimate_num_groups() during the join search.
Previously, during the join search, we only ever needed to perform
selectivity estimations. With this commit, we need to use
estimate_num_groups() in order to estimate what the hit ratio on the
result cache will be. In simple terms, if we expect 10 distinct values
and we expect 1000 outer rows, then we'll estimate the hit ratio to be
99%. Since cache hits are very cheap compared to scanning the underlying
nodes on the inner side of the nested loop join, then this will
significantly reduce the planner's cost for the join. However, it's
fairly easy to see here that things will go bad when estimate_num_groups()
incorrectly returns a value that's significantly lower than the actual
number of distinct values. If this happens then that may cause us to make
use of a nested loop join with a result cache instead of some other join
type, such as a merge or hash join. Our distinct estimations have been
known to be a source of trouble in the past, so the extra reliance on them
here could cause the planner to choose slower plans than it did previous
to having this feature. Distinct estimations are also fairly hard to
estimate accurately when several tables have been joined already or when a
WHERE clause filters out a set of values that are correlated to the
expressions we're estimating the number of distinct value for.
For now, the costing we perform during query planning for result caches
does put quite a bit of faith in the distinct estimations being accurate.
When these are accurate then we should generally see faster execution
times for plans containing a result cache. However, in the real world, we
may find that we need to either change the costings to put less trust in
the distinct estimations being accurate or perhaps even disable this
feature by default. There's always an element of risk when we teach the
query planner to do new tricks that it decides to use that new trick at
the wrong time and causes a regression. Users may opt to get the old
behavior by turning the feature off using the enable_resultcache GUC.
Currently, this is enabled by default. It remains to be seen if we'll
maintain that setting for the release.
Additionally, the name "Result Cache" is the best name I could think of
for this new node at the time I started writing the patch. Nobody seems
to strongly dislike the name. A few people did suggest other names but no
other name seemed to dominate in the brief discussion that there was about
names. Let's allow the beta period to see if the current name pleases
enough people. If there's some consensus on a better name, then we can
change it before the release. Please see the 2nd discussion link below
for the discussion on the "Result Cache" name.
Author: David Rowley
Reviewed-by: Andy Fan, Justin Pryzby, Zhihong Yu, Hou Zhijie
Tested-By: Konstantin Knizhnik
Discussion: https://postgr.es/m/CAApHDvrPcQyQdWERGYWx8J%2B2DLUNgXu%2BfOSbQ1UscxrunyXyrQ%40mail.gmail.com
Discussion: https://postgr.es/m/CAApHDvq=yQXr5kqhRviT2RhNKwToaWr9JAN5t+5_PzhuRJ3wvg@mail.gmail.com
This removes "Add Result Cache executor node". It seems that something
weird is going on with the tracking of cache hits and misses as
highlighted by many buildfarm animals. It's not yet clear what the
problem is as other parts of the plan indicate that the cache did work
correctly, it's just the hits and misses that were being reported as 0.
This is especially a bad time to have the buildfarm so broken, so
reverting before too many more animals go red.
Discussion: https://postgr.es/m/CAApHDvq_hydhfovm4=izgWs+C5HqEeRScjMbOgbpC-jRAeK3Yw@mail.gmail.com
Here we add a new executor node type named "Result Cache". The planner
can include this node type in the plan to have the executor cache the
results from the inner side of parameterized nested loop joins. This
allows caching of tuples for sets of parameters so that in the event that
the node sees the same parameter values again, it can just return the
cached tuples instead of rescanning the inner side of the join all over
again. Internally, result cache uses a hash table in order to quickly
find tuples that have been previously cached.
For certain data sets, this can significantly improve the performance of
joins. The best cases for using this new node type are for join problems
where a large portion of the tuples from the inner side of the join have
no join partner on the outer side of the join. In such cases, hash join
would have to hash values that are never looked up, thus bloating the hash
table and possibly causing it to multi-batch. Merge joins would have to
skip over all of the unmatched rows. If we use a nested loop join with a
result cache, then we only cache tuples that have at least one join
partner on the outer side of the join. The benefits of using a
parameterized nested loop with a result cache increase when there are
fewer distinct values being looked up and the number of lookups of each
value is large. Also, hash probes to lookup the cache can be much faster
than the hash probe in a hash join as it's common that the result cache's
hash table is much smaller than the hash join's due to result cache only
caching useful tuples rather than all tuples from the inner side of the
join. This variation in hash probe performance is more significant when
the hash join's hash table no longer fits into the CPU's L3 cache, but the
result cache's hash table does. The apparent "random" access of hash
buckets with each hash probe can cause a poor L3 cache hit ratio for large
hash tables. Smaller hash tables generally perform better.
The hash table used for the cache limits itself to not exceeding work_mem
* hash_mem_multiplier in size. We maintain a dlist of keys for this cache
and when we're adding new tuples and realize we've exceeded the memory
budget, we evict cache entries starting with the least recently used ones
until we have enough memory to add the new tuples to the cache.
For parameterized nested loop joins, we now consider using one of these
result cache nodes in between the nested loop node and its inner node. We
determine when this might be useful based on cost, which is primarily
driven off of what the expected cache hit ratio will be. Estimating the
cache hit ratio relies on having good distinct estimates on the nested
loop's parameters.
For now, the planner will only consider using a result cache for
parameterized nested loop joins. This works for both normal joins and
also for LATERAL type joins to subqueries. It is possible to use this new
node for other uses in the future. For example, to cache results from
correlated subqueries. However, that's not done here due to some
difficulties obtaining a distinct estimation on the outer plan to
calculate the estimated cache hit ratio. Currently we plan the inner plan
before planning the outer plan so there is no good way to know if a result
cache would be useful or not since we can't estimate the number of times
the subplan will be called until the outer plan is generated.
The functionality being added here is newly introducing a dependency on
the return value of estimate_num_groups() during the join search.
Previously, during the join search, we only ever needed to perform
selectivity estimations. With this commit, we need to use
estimate_num_groups() in order to estimate what the hit ratio on the
result cache will be. In simple terms, if we expect 10 distinct values
and we expect 1000 outer rows, then we'll estimate the hit ratio to be
99%. Since cache hits are very cheap compared to scanning the underlying
nodes on the inner side of the nested loop join, then this will
significantly reduce the planner's cost for the join. However, it's
fairly easy to see here that things will go bad when estimate_num_groups()
incorrectly returns a value that's significantly lower than the actual
number of distinct values. If this happens then that may cause us to make
use of a nested loop join with a result cache instead of some other join
type, such as a merge or hash join. Our distinct estimations have been
known to be a source of trouble in the past, so the extra reliance on them
here could cause the planner to choose slower plans than it did previous
to having this feature. Distinct estimations are also fairly hard to
estimate accurately when several tables have been joined already or when a
WHERE clause filters out a set of values that are correlated to the
expressions we're estimating the number of distinct value for.
For now, the costing we perform during query planning for result caches
does put quite a bit of faith in the distinct estimations being accurate.
When these are accurate then we should generally see faster execution
times for plans containing a result cache. However, in the real world, we
may find that we need to either change the costings to put less trust in
the distinct estimations being accurate or perhaps even disable this
feature by default. There's always an element of risk when we teach the
query planner to do new tricks that it decides to use that new trick at
the wrong time and causes a regression. Users may opt to get the old
behavior by turning the feature off using the enable_resultcache GUC.
Currently, this is enabled by default. It remains to be seen if we'll
maintain that setting for the release.
Additionally, the name "Result Cache" is the best name I could think of
for this new node at the time I started writing the patch. Nobody seems
to strongly dislike the name. A few people did suggest other names but no
other name seemed to dominate in the brief discussion that there was about
names. Let's allow the beta period to see if the current name pleases
enough people. If there's some consensus on a better name, then we can
change it before the release. Please see the 2nd discussion link below
for the discussion on the "Result Cache" name.
Author: David Rowley
Reviewed-by: Andy Fan, Justin Pryzby, Zhihong Yu
Tested-By: Konstantin Knizhnik
Discussion: https://postgr.es/m/CAApHDvrPcQyQdWERGYWx8J%2B2DLUNgXu%2BfOSbQ1UscxrunyXyrQ%40mail.gmail.com
Discussion: https://postgr.es/m/CAApHDvq=yQXr5kqhRviT2RhNKwToaWr9JAN5t+5_PzhuRJ3wvg@mail.gmail.com
This patch makes two closely related sets of changes:
1. For UPDATE, the subplan of the ModifyTable node now only delivers
the new values of the changed columns (i.e., the expressions computed
in the query's SET clause) plus row identity information such as CTID.
ModifyTable must re-fetch the original tuple to merge in the old
values of any unchanged columns. The core advantage of this is that
the changed columns are uniform across all tables of an inherited or
partitioned target relation, whereas the other columns might not be.
A secondary advantage, when the UPDATE involves joins, is that less
data needs to pass through the plan tree. The disadvantage of course
is an extra fetch of each tuple to be updated. However, that seems to
be very nearly free in context; even worst-case tests don't show it to
add more than a couple percent to the total query cost. At some point
it might be interesting to combine the re-fetch with the tuple access
that ModifyTable must do anyway to mark the old tuple dead; but that
would require a good deal of refactoring and it seems it wouldn't buy
all that much, so this patch doesn't attempt it.
2. For inherited UPDATE/DELETE, instead of generating a separate
subplan for each target relation, we now generate a single subplan
that is just exactly like a SELECT's plan, then stick ModifyTable
on top of that. To let ModifyTable know which target relation a
given incoming row refers to, a tableoid junk column is added to
the row identity information. This gets rid of the horrid hack
that was inheritance_planner(), eliminating O(N^2) planning cost
and memory consumption in cases where there were many unprunable
target relations.
Point 2 of course requires point 1, so that there is a uniform
definition of the non-junk columns to be returned by the subplan.
We can't insist on uniform definition of the row identity junk
columns however, if we want to keep the ability to have both
plain and foreign tables in a partitioning hierarchy. Since
it wouldn't scale very far to have every child table have its
own row identity column, this patch includes provisions to merge
similar row identity columns into one column of the subplan result.
In particular, we can merge the whole-row Vars typically used as
row identity by FDWs into one column by pretending they are type
RECORD. (It's still okay for the actual composite Datums to be
labeled with the table's rowtype OID, though.)
There is more that can be done to file down residual inefficiencies
in this patch, but it seems to be committable now.
FDW authors should note several API changes:
* The argument list for AddForeignUpdateTargets() has changed, and so
has the method it must use for adding junk columns to the query. Call
add_row_identity_var() instead of manipulating the parse tree directly.
You might want to reconsider exactly what you're adding, too.
* PlanDirectModify() must now work a little harder to find the
ForeignScan plan node; if the foreign table is part of a partitioning
hierarchy then the ForeignScan might not be the direct child of
ModifyTable. See postgres_fdw for sample code.
* To check whether a relation is a target relation, it's no
longer sufficient to compare its relid to root->parse->resultRelation.
Instead, check it against all_result_relids or leaf_result_relids,
as appropriate.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/CA+HiwqHpHdqdDn48yCEhynnniahH78rwcrv1rEX65-fsZGBOLQ@mail.gmail.com
This implements asynchronous execution, which runs multiple parts of a
non-parallel-aware Append concurrently rather than serially to improve
performance when possible. Currently, the only node type that can be
run concurrently is a ForeignScan that is an immediate child of such an
Append. In the case where such ForeignScans access data on different
remote servers, this would run those ForeignScans concurrently, and
overlap the remote operations to be performed simultaneously, so it'll
improve the performance especially when the operations involve
time-consuming ones such as remote join and remote aggregation.
We may extend this to other node types such as joins or aggregates over
ForeignScans in the future.
This also adds the support for postgres_fdw, which is enabled by the
table-level/server-level option "async_capable". The default is false.
Robert Haas, Kyotaro Horiguchi, Thomas Munro, and myself. This commit
is mostly based on the patch proposed by Robert Haas, but also uses
stuff from the patch proposed by Kyotaro Horiguchi and from the patch
proposed by Thomas Munro. Reviewed by Kyotaro Horiguchi, Konstantin
Knizhnik, Andrey Lepikhov, Movead Li, Thomas Munro, Justin Pryzby, and
others.
Discussion: https://postgr.es/m/CA%2BTgmoaXQEt4tZ03FtQhnzeDEMzBck%2BLrni0UWHVVgOTnA6C1w%40mail.gmail.com
Discussion: https://postgr.es/m/CA%2BhUKGLBRyu0rHrDCMC4%3DRn3252gogyp1SjOgG8SEKKZv%3DFwfQ%40mail.gmail.com
Discussion: https://postgr.es/m/20200228.170650.667613673625155850.horikyota.ntt%40gmail.com
To allow inserts in parallel-mode this feature has to ensure that all the
constraints, triggers, etc. are parallel-safe for the partition hierarchy
which is costly and we need to find a better way to do that. Additionally,
we could have used existing cached information in some cases like indexes,
domains, etc. to determine the parallel-safety.
List of commits reverted, in reverse chronological order:
ed62d3737c Doc: Update description for parallel insert reloption.
c8f78b6161 Add a new GUC and a reloption to enable inserts in parallel-mode.
c5be48f092 Improve FK trigger parallel-safety check added by 05c8482f7f.
e2cda3c20a Fix use of relcache TriggerDesc field introduced by commit 05c8482f7f.
e4e87a32cc Fix valgrind issue in commit 05c8482f7f.
05c8482f7f Enable parallel SELECT for "INSERT INTO ... SELECT ...".
Discussion: https://postgr.es/m/E1lMiB9-0001c3-SY@gemulon.postgresql.org
Commit 05c8482f7f added the implementation of parallel SELECT for
"INSERT INTO ... SELECT ..." which may incur non-negligible overhead in
the additional parallel-safety checks that it performs, even when, in the
end, those checks determine that parallelism can't be used. This is
normally only ever a problem in the case of when the target table has a
large number of partitions.
A new GUC option "enable_parallel_insert" is added, to allow insert in
parallel-mode. The default is on.
In addition to the GUC option, the user may want a mechanism to allow
inserts in parallel-mode with finer granularity at table level. The new
table option "parallel_insert_enabled" allows this. The default is true.
Author: "Hou, Zhijie"
Reviewed-by: Greg Nancarrow, Amit Langote, Takayuki Tsunakawa, Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1K-cW7svLC2D7DHoGHxdAdg3P37BLgebqBOC2ZLc9a6QQ%40mail.gmail.com
Discussion: https://postgr.es/m/CAJcOf-cXnB5cnMKqWEp2E2z7Mvcd04iLVmV=qpFJrR3AcrTS3g@mail.gmail.com
Parallel SELECT can't be utilized for INSERT in the following cases:
- INSERT statement uses the ON CONFLICT DO UPDATE clause
- Target table has a parallel-unsafe: trigger, index expression or
predicate, column default expression or check constraint
- Target table has a parallel-unsafe domain constraint on any column
- Target table is a partitioned table with a parallel-unsafe partition key
expression or support function
The planner is updated to perform additional parallel-safety checks for
the cases listed above, for determining whether it is safe to run INSERT
in parallel-mode with an underlying parallel SELECT. The planner will
consider using parallel SELECT for "INSERT INTO ... SELECT ...", provided
nothing unsafe is found from the additional parallel-safety checks, or
from the existing parallel-safety checks for SELECT.
While checking parallel-safety, we need to check it for all the partitions
on the table which can be costly especially when we decide not to use a
parallel plan. So, in a separate patch, we will introduce a GUC and or a
reloption to enable/disable parallelism for Insert statements.
Prior to entering parallel-mode for the execution of INSERT with parallel
SELECT, a TransactionId is acquired and assigned to the current
transaction state. This is necessary to prevent the INSERT from attempting
to assign the TransactionId whilst in parallel-mode, which is not allowed.
This approach has a disadvantage in that if the underlying SELECT does not
return any rows, then the TransactionId is not used, however that
shouldn't happen in practice in many cases.
Author: Greg Nancarrow, Amit Langote, Amit Kapila
Reviewed-by: Amit Langote, Hou Zhijie, Takayuki Tsunakawa, Antonin Houska, Bharath Rupireddy, Dilip Kumar, Vignesh C, Zhihong Yu, Amit Kapila
Tested-by: Tang, Haiying
Discussion: https://postgr.es/m/CAJcOf-cXnB5cnMKqWEp2E2z7Mvcd04iLVmV=qpFJrR3AcrTS3g@mail.gmail.com
Discussion: https://postgr.es/m/CAJcOf-fAdj=nDKMsRhQzndm-O13NY4dL6xGcEvdX5Xvbbi0V7g@mail.gmail.com
This adds a new executor node named TID Range Scan. The query planner
will generate paths for TID Range scans when quals are discovered on base
relations which search for ranges on the table's ctid column. These
ranges may be open at either end. For example, WHERE ctid >= '(10,0)';
will return all tuples on page 10 and over.
To support this, two new optional callback functions have been added to
table AM. scan_set_tidrange is used to set the scan range to just the
given range of TIDs. scan_getnextslot_tidrange fetches the next tuple
in the given range.
For AMs were scanning ranges of TIDs would not make sense, these functions
can be set to NULL in the TableAmRoutine. The query planner won't
generate TID Range Scan Paths in that case.
Author: Edmund Horner, David Rowley
Reviewed-by: David Rowley, Tomas Vondra, Tom Lane, Andres Freund, Zhihong Yu
Discussion: https://postgr.es/m/CAMyN-kB-nFTkF=VA_JPwFNo08S0d-Yk0F741S2B7LDmYAi8eyA@mail.gmail.com
It turns out that the calculation of [Merge]AppendPath.partitioned_rels
in allpaths.c is faulty and sometimes omits relevant non-leaf partitions,
allowing an assertion added by commit a929e17e5a to trigger. Rather
than fix that, it seems better to get rid of those fields altogether.
We don't really need the info until create_plan time, and calculating
it once for the selected plan should be cheaper than calculating it
for each append path we consider.
The preceding two commits did away with all use of the partitioned_rels
values; this commit just mechanically removes the fields and the code
that calculated them.
Discussion: https://postgr.es/m/87sg8tqhsl.fsf@aurora.ydns.eu
Discussion: https://postgr.es/m/CAJKUy5gCXDSmFs2c=R+VGgn7FiYcLCsEFEuDNNLGfoha=pBE_g@mail.gmail.com
Previously, pull_varnos() took the relids of a PlaceHolderVar as being
equal to the relids in its contents, but that fails to account for the
possibility that we have to postpone evaluation of the PHV due to outer
joins. This could result in a malformed plan. The known cases end up
triggering the "failed to assign all NestLoopParams to plan nodes"
sanity check in createplan.c, but other symptoms may be possible.
The right value to use is the join level we actually intend to evaluate
the PHV at. We can get that from the ph_eval_at field of the associated
PlaceHolderInfo. However, there are some places that call pull_varnos()
before the PlaceHolderInfos have been created; in that case, fall back
to the conservative assumption that the PHV will be evaluated at its
syntactic level. (In principle this might result in missing some legal
optimization, but I'm not aware of any cases where it's an issue in
practice.) Things are also a bit ticklish for calls occurring during
deconstruct_jointree(), but AFAICS the ph_eval_at fields should have
reached their final values by the time we need them.
The main problem in making this work is that pull_varnos() has no
way to get at the PlaceHolderInfos. We can fix that easily, if a
bit tediously, in HEAD by passing it the planner "root" pointer.
In the back branches that'd cause an unacceptable API/ABI break for
extensions, so leave the existing entry points alone and add new ones
with the additional parameter. (If an old entry point is called and
encounters a PHV, it'll fall back to using the syntactic level,
again possibly missing some valid optimization.)
Back-patch to v12. The computation is surely also wrong before that,
but it appears that we cannot reach a bad plan thanks to join order
restrictions imposed on the subquery that the PlaceHolderVar came from.
The error only became reachable when commit 4be058fe9 allowed trivial
subqueries to be collapsed out completely, eliminating their join order
restrictions.
Per report from Stephan Springl.
Discussion: https://postgr.es/m/171041.1610849523@sss.pgh.pa.us
While we do allow SRFs in ORDER BY, scan/join processing should not
consider such cases - such sorts should only happen via final Sort atop
a ProjectSet. So make sure we don't try adding such sorts below Gather
Merge, just like we do for expressions that are volatile and/or not
parallel safe.
Backpatch to PostgreSQL 13, where this code was introduced as part of
the Incremental Sort patch.
Author: James Coleman
Reviewed-by: Tomas Vondra
Backpatch-through: 13
Discussion: https://postgr.es/m/CAAaqYe8cK3g5CfLC4w7bs=hC0mSksZC=H5M8LSchj5e5OxpTAg@mail.gmail.com
Discussion: https://postgr.es/m/295524.1606246314%40sss.pgh.pa.us
Commit ebb7ae839d ensured we ignore pathkeys with volatile expressions
when considering adding a sort below a Gather Merge. Turns out we need
to care about parallel safety of the pathkeys too, otherwise we might
try sorting e.g. on results of a correlated subquery (as demonstrated
by a report from Luis Roberto).
Initial investigation by Tom Lane, patch by James Coleman. Backpatch
to 13, where the code was instroduced (as part of Incremental Sort).
Reported-by: Luis Roberto
Author: James Coleman
Reviewed-by: Tomas Vondra
Backpatch-through: 13
Discussion: https://postgr.es/m/622580997.37108180.1604080457319.JavaMail.zimbra%40siscobra.com.br
Discussion: https://postgr.es/m/CAAaqYe8cK3g5CfLC4w7bs=hC0mSksZC=H5M8LSchj5e5OxpTAg@mail.gmail.com
Formerly we only applied extended statistics to an OR clause as part
of the clauselist_selectivity() code path for an OR clause appearing
in an implicitly-ANDed list of clauses. This meant that it could only
use extended statistics if all sub-clauses of the OR clause were
covered by a single extended statistics object.
Instead, teach clause_selectivity() how to apply extended statistics
to an OR clause by handling its ORed list of sub-clauses in a similar
manner to an implicitly-ANDed list of sub-clauses, but with different
combination rules. This allows one or more extended statistics objects
to be used to estimate all or part of the list of sub-clauses. Any
remaining sub-clauses are then treated as if they are independent.
Additionally, to avoid double-application of extended statistics, this
introduces "extended" versions of clause_selectivity() and
clauselist_selectivity(), which include an option to ignore extended
statistics. This replaces the old clauselist_selectivity_simple()
function which failed to completely ignore extended statistics when
called from the extended statistics code.
A known limitation of the current infrastructure is that an AND clause
under an OR clause is not treated as compatible with extended
statistics (because we don't build RestrictInfos for such sub-AND
clauses). Thus, for example, "(a=1 AND b=1) OR (a=2 AND b=2)" will
currently be treated as two independent AND clauses (each of which may
be estimated using extended statistics), but extended statistics will
not currently be used to account for any possible overlap between
those clauses. Improving that is left as a task for the future.
Original patch by Tomas Vondra, with additional improvements by me.
Discussion: https://postgr.es/m/20200113230008.g67iyk4cs3xbnjju@development
For debugging purposes, Path nodes are supposed to have outfuncs
support, but this was overlooked in the original incremental sort patch.
While at it, clean up a couple other minor oversights, as well as
bizarre choice of return type for create_incremental_sort_path().
(All the existing callers just cast it to "Path *" immediately, so
they don't care, but some future caller might care.)
outfuncs.c fix by Zhijie Hou, the rest by me
Discussion: https://postgr.es/m/324c4d81d8134117972a5b1f6cdf9560@G08CNEXMBPEKD05.g08.fujitsu.local
When considering Incremental Sort below a Gather Merge, we need to be
a bit more careful when matching pathkeys to EC members. It's not enough
to find a member whose Vars are all in the current relation's target;
volatile expressions in particular need to be contained in the target,
otherwise it's too early to use the pathkey.
Reported-by: Jaime Casanova
Author: James Coleman
Reviewed-by: Tomas Vondra
Backpatch-through: 13, where the incremental sort code was added
Discussion: https://postgr.es/m/CAJGNTeNaxpXgBVcRhJX%2B2vSbq%2BF2kJqGBcvompmpvXb7pq%2BoFA%40mail.gmail.com
get_foreign_key_join_selectivity() looks for join clauses that equate
the two sides of the FK constraint. However, if we have a query like
"WHERE fktab.a = pktab.a and fktab.a = 1", it won't find any such join
clause, because equivclass.c replaces the given clauses with "fktab.a
= 1 and pktab.a = 1", which can be enforced at the scan level, leaving
nothing to be done for column "a" at the join level.
We can fix that expectation without much trouble, but then a new problem
arises: applying the foreign-key-based selectivity rule produces a
rowcount underestimate, because we're effectively double-counting the
selectivity of the "fktab.a = 1" clause. So we have to cancel that
selectivity out of the estimate.
To fix, refactor process_implied_equality() so that it can pass back the
new RestrictInfo to its callers in equivclass.c, allowing the generated
"fktab.a = 1" clause to be saved in the EquivalenceClass's ec_derives
list. Then it's not much trouble to dig out the relevant RestrictInfo
when we need to adjust an FK selectivity estimate. (While at it, we
can also remove the expensive use of initialize_mergeclause_eclasses()
to set up the new RestrictInfo's left_ec and right_ec pointers.
The equivclass.c code can set those basically for free.)
This seems like clearly a bug fix, but I'm hesitant to back-patch it,
first because there's some API/ABI risk for extensions and second because
we're usually loath to destabilize plan choices in stable branches.
Per report from Sigrid Ehrenreich.
Discussion: https://postgr.es/m/1019549.1603770457@sss.pgh.pa.us
Discussion: https://postgr.es/m/AM6PR02MB5287A0ADD936C1FA80973E72AB190@AM6PR02MB5287.eurprd02.prod.outlook.com
