This adds the statistics about transactions spilled to disk from
ReorderBuffer. Users can query the pg_stat_replication_slots view to check
these stats and call pg_stat_reset_replication_slot to reset the stats of
a particular slot. Users can pass NULL in pg_stat_reset_replication_slot
to reset stats of all the slots.
This commit extends the statistics collector to track this information
about slots.
Author: Sawada Masahiko and Amit Kapila
Reviewed-by: Amit Kapila and Dilip Kumar
Discussion: https://postgr.es/m/CA+fd4k5_pPAYRTDrO2PbtTOe0eHQpBvuqmCr8ic39uTNmR49Eg@mail.gmail.com
It appears that commit cf63c641c, which intended to prevent
misoptimization of the result-building step in makeOrderedSetArgs,
didn't go far enough: buildfarm member hornet's version of xlc
is now optimizing back to the old, broken behavior in which
list_length(directargs) is fetched only after list_concat() has
changed that value. I'm not entirely convinced whether that's
an undeniable compiler bug or whether it can be justified by a
sufficiently aggressive interpretation of C sequence points.
So let's just change the code to make it harder to misinterpret.
Back-patch to all supported versions, just in case.
Discussion: https://postgr.es/m/1830491.1601944935@sss.pgh.pa.us
The date-vs-timestamp, date-vs-timestamptz, and timestamp-vs-timestamptz
comparators all worked by promoting the first type to the second and
then doing a simple same-type comparison. This works fine, except
when the conversion result is out of range, in which case we throw an
entirely avoidable error. The sources of such failures are
(a) type date can represent dates much farther in the future than
the timestamp types can;
(b) timezone rotation might cause a just-in-range timestamp value to
become a just-out-of-range timestamptz value.
Up to now we just ignored these corner-case issues, but now we have
an actual user complaint (bug #16657 from Huss EL-Sheikh), so let's
do something about it.
It turns out that commit 52ad1e659 already built all the necessary
infrastructure to support error-free comparisons, but neglected to
actually use it in the main-line code paths. Fix that, do a little
bit of code style review, and remove the now-duplicate logic in
jsonpath_exec.c.
Back-patch to v13 where 52ad1e659 came in. We could take this back
further by back-patching said infrastructure, but given the small
number of complaints so far, I don't feel a great need to.
Discussion: https://postgr.es/m/16657-cde2f876d8cc7971@postgresql.org
In logical replication when a subscriber is missing some columns, it
currently emits an error message that says "some" columns are missing, but
it doesn't specify the missing column names. Change that to display
missing column names which makes an error to be more informative to the
user.
We have decided not to backpatch this commit as this is a minor usability
improvement and no user has reported this.
Reported-by: Bharath Rupireddy
Author: Bharath Rupireddy
Reviewed-by: Kyotaro Horiguchi and Amit Kapila
Discussion: https://postgr.es/m/CALj2ACVkW-EXH_4pmBK8tNeHRz5ksUC4WddGactuCjPiBch-cg@mail.gmail.com
This patch prevents crashes or wrong plans when partition-wise joins
are considered during GEQO planning, as a consequence of the
EquivalenceClass data structures becoming corrupt after a GEQO
context reset.
A remaining problem is that successive GEQO cycles will make multiple
copies of the required EC members, since add_child_join_rel_equivalences
has no idea that such members might exist already. For now we'll just
live with that. The lack of field complaints of crashes suggests that
this is a mighty little-used situation.
Back-patch to v12 where this code was introduced.
Discussion: https://postgr.es/m/1683100.1601860653@sss.pgh.pa.us
Since PG 12, clientcert no longer supported only on/off, so remove 1/0
as possible values, and instead support only the text strings
'verify-ca' and 'verify-full'.
Remove support for 'no-verify' since that is possible by just not
specifying clientcert.
Also, throw an error if 'verify-ca' is used and 'cert' authentication is
used, since cert authentication requires verify-full.
Also improve the docs.
THIS IS A BACKWARD INCOMPATIBLE API CHANGE.
Reported-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20200716.093012.1627751694396009053.horikyota.ntt@gmail.com
Author: Kyotaro Horiguchi
Backpatch-through: master
This should help to identify what happened when studying the postmaster
log after-the-fact.
While here, clean up some old comments in the same function.
Discussion: https://postgr.es/m/1568983.1601845687@sss.pgh.pa.us
get_eclass_for_sort_expr() computes expr_relids and nullable_relids
early on, even though they won't be needed unless we make a new
EquivalenceClass, which we often don't. Aside from the probably-minor
inefficiency, there's a memory management problem: these bitmapsets will
be built in the caller's context, leading to dangling pointers if that
is shorter-lived than root->planner_cxt. This would be a live bug if
get_eclass_for_sort_expr() could be called with create_it = true during
GEQO join planning. So far as I can find, the core code never does
that, but it's hard to be sure that no extensions do, especially since
the comments make it clear that that's supposed to be a supported case.
Fix by not computing these values until we've switched into planner_cxt
to build the new EquivalenceClass.
generate_join_implied_equalities() uses inner_rel->relids to look up
relevant eclasses, but it ought to be using nominal_inner_relids.
This is presently harmless because a child RelOptInfo will always have
exactly the same eclass_indexes as its topmost parent; but that might
not be true forever, and anyway it makes the code confusing.
The first of these is old (introduced by me in f3b3b8d5b), so back-patch
to all supported branches. The second only dates to v13, but we might
as well back-patch it to keep the code looking similar across branches.
Discussion: https://postgr.es/m/1508010.1601832581@sss.pgh.pa.us
The handling of those options was inconsistent, as the processing used
directly the value assigned to the option to check if it was redundant,
leading to patterns like this one to succeed (note that false is
specified first):
COPY hoge to '/path/to/file/' (header off, header on);
And the opposite would fail correctly (note that true is first here):
COPY hoge to '/path/to/file/' (header on, header off);
While on it, add some tests to check for all redundant patterns with the
options of COPY. I have gone through the code and did not notice
similar mistakes for other commands.
"header" got it wrong since b63990c, and "freeze" was wrong from the
start as of 8de72b6. No backpatch is done per the lack of complaints.
Reported-by: Rémi Lapeyre
Discussion: https://postgr.es/m/20200929072433.GA15570@paquier.xyz
Discussion: https://postgr.es/m/0B55BD07-83E4-439F-AACC-FA2D7CF50532@lenstra.fr
The BKI file's string quoting conventions were previously quite weird,
perhaps as a result of repurposing a function built to scan
single-quoted strings to scan double-quoted ones. Change to use the
same rules as we use in GUC files, allowing some simplifications in
genbki.pl and initdb.c.
While at it, completely remove the backend's scanstr() function, which
was essentially a duplicate of the string dequoting code in guc-file.l.
Instead export that one (under a less generic name than it had) and let
bootscanner.l use it. Now we can clarify that scansup.c exists only to
support the main lexer. We could alternatively have removed GUC_scanstr,
but this way seems better since the previous arrangement could mislead
a reader into thinking that scanstr() had something to do with the main
lexer's handling of string literals. Maybe it did once, but if so it
was a long time ago.
This patch does not bump catversion, since the initially-installed
catalog contents don't change. Note however that successful initdb
after applying this patch will require up-to-date postgres.bki as well
as postgres and initdb executables.
In passing, remove a bunch of very-long-obsolete #include's in
bootparse.y and bootscanner.l.
John Naylor
Discussion: https://postgr.es/m/CACPNZCtDpd18T0KATTmCggO2GdVC4ow86ypiq5ENff1VnauL8g@mail.gmail.com
This view shows the statistics about WAL activity. Currently it has only
two columns: wal_buffers_full and stats_reset. wal_buffers_full column
indicates the number of times WAL data was written to the disk because
WAL buffers got full. This information is useful when tuning wal_buffers.
stats_reset column indicates the time at which these statistics were
last reset.
pg_stat_wal view is also the basic infrastructure to expose other
various statistics about WAL activity later.
Bump PGSTAT_FILE_FORMAT_ID due to the change in pgstat format.
Bump catalog version.
Author: Masahiro Ikeda
Reviewed-by: Takayuki Tsunakawa, Kyotaro Horiguchi, Amit Kapila, Fujii Masao
Discussion: https://postgr.es/m/188bd3f2d2233cf97753b5ced02bb050@oss.nttdata.com
Providing this information can be useful for example when diagnosing
problems related to recovery conflicts or for recovery issues without
having to go through the output generated by pg_waldump to get some
information about the blocks a WAL record works on.
The block information is printed in the same format as pg_waldump. This
already existed in xlog.c for debugging purposes with -DWAL_DEBUG, so
adding the block information in the callback has required just a small
refactoring.
Author: Bertrand Drouvot
Reviewed-by: Michael Paquier, Masahiko Sawada
Discussion: https://postgr.es/m/c31e2cba-efda-762c-f4ad-5c25e5dac3d0@amazon.com
This is not strictly necessary, as the right-links are only needed by
scans that are concurrent with page splits, and neither scans or page
splits can happen during sorted index build. But it seems like a good
idea to set them anyway, if we e.g. want to add a check to amcheck in
the future to verify that the chain of right-links is complete.
Author: Andrey Borodin
Discussion: https://www.postgresql.org/message-id/4D68C21F-9FB9-41DA-B663-FDFC8D143788%40yandex-team.ru
I (Andres) broke this in 623a9CA79bx, because I didn't think about the
way snapshots are built on standbys sufficiently. Unfortunately our
existing tests did not catch this, as they are all just querying with
psql (therefore ending up with fresh snapshots).
The fix is trivial, we just need to increment the transaction
completion counter in ExpireTreeKnownAssignedTransactionIds(), which
is the equivalent of ProcArrayEndTransaction() during recovery.
This commit also adds a new test doing some basic testing of the
correctness of snapshots built on standbys. To avoid the
aforementioned issue of one-shot psql's not exercising the snapshot
caching, the test uses a long lived psqls, similar to
013_crash_restart.pl. It'd be good to extend the test further.
Reported-By: Ian Barwick <ian.barwick@2ndquadrant.com>
Author: Andres Freund <andres@anarazel.de>
Author: Ian Barwick <ian.barwick@2ndquadrant.com>
Discussion: https://postgr.es/m/61291ffe-d611-f889-68b5-c298da9fb18f@2ndquadrant.com
Previously, a conversion such as
to_date('-44-02-01','YYYY-MM-DD')
would result in '0045-02-01 BC', as the code attempted to interpret
the negative year as BC, but failed to apply the correction needed
for our internal handling of BC years. Fix the off-by-one problem.
Also, arrange for the combination of a negative year and an
explicit "BC" marker to cancel out and produce AD. This is how
the negative-century case works, so it seems sane to do likewise.
Continue to read "year 0000" as 1 BC. Oracle would throw an error,
but we've accepted that case for a long time so I'm hesitant to
change it in a back-patch.
Per bug #16419 from Saeed Hubaishan. Back-patch to all supported
branches.
Dar Alathar-Yemen and Tom Lane
Discussion: https://postgr.es/m/16419-d8d9db0a7553f01b@postgresql.org
Previously we threw an error. But make_date already allowed the case,
so it is inconsistent as well as unhelpful for make_timestamp not to.
Both functions continue to reject year zero.
Code and test fixes by Peter Eisentraut, doc changes by me
Discussion: https://postgr.es/m/13c0992c-f15a-a0ca-d839-91d3efd965d9@2ndquadrant.com
The SQL standard doesn't require jsonpath .datetime() method to support the
ISO 8601 format. But our to_json[b]() functions convert timestamps to text in
the ISO 8601 format in the sake of compatibility with javascript. So, we add
support of the ISO 8601 to the jsonpath .datetime() in the sake compatibility
with to_json[b]().
The standard mode of datetime parsing currently supports just template patterns
and separators in the format string. In order to implement ISO 8601, we have to
add support of the format string double quotes to the standard parsing mode.
Discussion: https://postgr.es/m/94321be0-cc96-1a81-b6df-796f437f7c66%40postgrespro.ru
Author: Nikita Glukhov, revised by me
Backpatch-through: 13
bffe1bd684 has introduced jsonpath .datetime() method, but default formats
for time and timestamp contain excess space between time and timezone. This
commit removes this excess space making behavior of .datetime() method
standard-compliant.
Discussion: https://postgr.es/m/94321be0-cc96-1a81-b6df-796f437f7c66%40postgrespro.ru
Author: Nikita Glukhov
Backpatch-through: 13
Previously the standby server didn't archive timeline history files
streamed from the primary even when archive_mode is set to "always",
while it archives the streamed WAL files. This could cause the PITR to
fail because there was no required timeline history file in the archive.
The cause of this issue was that walreceiver didn't mark those files as
ready for archiving.
This commit makes walreceiver mark those streamed timeline history
files as ready for archiving if archive_mode=always. Then the archiver
process archives the marked timeline history files.
Back-patch to all supported versions.
Reported-by: Grigory Smolkin
Author: Grigory Smolkin, Fujii Masao
Reviewed-by: David Zhang, Anastasia Lubennikova
Discussion: https://postgr.es/m/54b059d4-2b48-13a4-6f43-95a087c92367@postgrespro.ru
This addresses a couple of issues with the so-said subject:
- Report the correct parent relation with the index actually being
rebuilt or validated. Previously, the command status remained set to
the last index created for the progress of the index build and
validation, which would be incorrect when working on a table that has
more than one index.
- Use the correct phase when waiting before the drop of the old
indexes. Previously, this was reported with the same status as when
waiting before the old indexes are marked as dead.
Author: Matthias van de Meent, Michael Paquier
Discussion: https://postgr.es/m/CAEze2WhqFgcwe1_tv=sFYhLWV2AdpfukumotJ6JNcAOQs3jufg@mail.gmail.com
Backpatch-through: 12
We have a dozen or so places that need to iterate over all but the
first cell of a List. Prior to v13 this was typically written as
for_each_cell(lc, lnext(list_head(list)))
Commit 1cff1b95a changed these to
for_each_cell(lc, list, list_second_cell(list))
This patch introduces a new macro for_each_from() which expresses
the start point as a list index, allowing these to be written as
for_each_from(lc, list, 1)
This is marginally more efficient, since ForEachState.i can be
initialized directly instead of backing into it from a ListCell
address. It also seems clearer and less typo-prone.
Some of the remaining uses of for_each_cell() look like they could
profitably be changed to for_each_from(), but here I confined myself
to changing uses of list_second_cell().
Also, fix for_each_cell_setup() and for_both_cell_setup() to
const-ify their arguments; that's a simple oversight in 1cff1b95a.
Back-patch into v13, on the grounds that (1) the const-ification
is a minor bug fix, and (2) it's better for back-patching purposes
if we only have two ways to write these loops rather than three.
In HEAD, also remove list_third_cell() and list_fourth_cell(),
which were also introduced in 1cff1b95a, and are unused as of
cc99baa43. It seems unlikely that any third-party code would
have started to use them already; anyone who has can be directed
to list_nth_cell instead.
Discussion: https://postgr.es/m/CAApHDvpo1zj9KhEpU2cCRZfSM3Q6XGdhzuAS2v79PH7WJBkYVA@mail.gmail.com
transformPartitionBoundValue went out of its way to do the wrong
thing: there is no reason to complain about a non-matching COLLATE
clause in a partition boundary expression. We're coercing the
bound expression to the target column type as though by an
implicit assignment, and the rules for implicit assignment say
that collations can be implicitly converted.
What we *do* need to do, and the code is not doing, is apply
assign_expr_collations() to the bound expression. While this is
merely a definition disagreement, that is a bug that needs to be
back-patched, so I'll commit it separately.
Discussion: https://postgr.es/m/CAJV4CdrZ5mKuaEsRSbLf2URQ3h6iMtKD=hik8MaF5WwdmC9uZw@mail.gmail.com
SQL operations such as CURRENT_DATE, CURRENT_TIME, LOCALTIME, and
conversion of "now" in a datetime input string have to obtain the
transaction start timestamp ("now()") as a broken-down struct pg_tm.
This is a remarkably expensive conversion, and since now() does not
change intra-transaction, it doesn't really need to be done more than
once per transaction. Introducing a simple cache provides visible
speedups in queries that compute these values many times, for example
insertion of many rows that use a default value of CURRENT_DATE.
Peter Smith, with a bit of kibitzing by me
Discussion: https://postgr.es/m/CAHut+Pu89TWjq530V2gY5O6SWi=OEJMQ_VHMt8bdZB_9JFna5A@mail.gmail.com
When commit bd3daddaf introduced AlternativeSubPlans, I had some
ambitions towards allowing the choice of subplan to change during
execution. That has not happened, or even been thought about, in the
ensuing twelve years; so it seems like a failed experiment. So let's
rip that out and resolve the choice of subplan at the end of planning
(in setrefs.c) rather than during executor startup. This has a number
of positive benefits:
* Removal of a few hundred lines of executor code, since
AlternativeSubPlans need no longer be supported there.
* Removal of executor-startup overhead (particularly, initialization
of subplans that won't be used).
* Removal of incidental costs of having a larger plan tree, such as
tree-scanning and copying costs in the plancache; not to mention
setrefs.c's own costs of processing the discarded subplans.
* EXPLAIN no longer has to print a weird (and undocumented)
representation of an AlternativeSubPlan choice; it sees only the
subplan actually used. This should mean less confusion for users.
* Since setrefs.c knows which subexpression of a plan node it's
working on at any instant, it's possible to adjust the estimated
number of executions of the subplan based on that. For example,
we should usually estimate more executions of a qual expression
than a targetlist expression. The implementation used here is
pretty simplistic, because we don't want to expend a lot of cycles
on the issue; but it's better than ignoring the point entirely,
as the executor had to.
That last point might possibly result in shifting the choice
between hashed and non-hashed EXISTS subplans in a few cases,
but in general this patch isn't meant to change planner choices.
Since we're doing the resolution so late, it's really impossible
to change any plan choices outside the AlternativeSubPlan itself.
Patch by me; thanks to David Rowley for review.
Discussion: https://postgr.es/m/1992952.1592785225@sss.pgh.pa.us
This function leaked some memory while loading qual clauses for
an RLS policy. While ordinarily negligible, that could build up
in some repeated-reload cases, as reported by Konstantin Knizhnik.
We can improve matters by borrowing the coding long used in
RelationBuildRuleLock: build stringToNode's result directly in
the target context, and remember to explicitly pfree the
input string.
This patch by no means completely guarantees zero leaks within
this function, since we have no real guarantee that the catalog-
reading subroutines it calls don't leak anything. However,
practical tests suggest that this is enough to resolve the issue.
In any case, any remaining leaks are similar to those risked by
RelationBuildRuleLock and other relcache-loading subroutines.
If we need to fix them, we should adopt a more global approach
such as that used by the RECOVER_RELATION_BUILD_MEMORY hack.
While here, let's remove the need for an expensive PG_TRY block by
using MemoryContextSetParent to reparent an initially-short-lived
context for the RLS data.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/21356c12-8917-8249-b35f-1c447231922b@postgrespro.ru
Commit 464824323e changed the logical replication protocol to allow the
streaming of in-progress transactions and used the new version of protocol
irrespective of the server version. Use the appropriate version of the
protocol based on the server version.
Reported-by: Ashutosh Sharma
Author: Dilip Kumar
Reviewed-by: Ashutosh Sharma and Amit Kapila
Discussion: https://postgr.es/m/CAE9k0P=9OpXcNrcU5Gsvd5MZ8GFpiN833vNHzX6Uc=8+h1ft1Q@mail.gmail.com
Previously, we called fsync() after writing out individual pg_xact,
pg_multixact and pg_commit_ts pages due to cache pressure, leading to
regular I/O stalls in user backends and recovery. Collapse requests for
the same file into a single system call as part of the next checkpoint,
as we already did for relation files, using the infrastructure developed
by commit 3eb77eba. This can cause a significant improvement to
recovery performance, especially when it's otherwise CPU-bound.
Hoist ProcessSyncRequests() up into CheckPointGuts() to make it clearer
that it applies to all the SLRU mini-buffer-pools as well as the main
buffer pool. Rearrange things so that data collected in CheckpointStats
includes SLRU activity.
Also remove the Shutdown{CLOG,CommitTS,SUBTRANS,MultiXact}() functions,
because they were redundant after the shutdown checkpoint that
immediately precedes them. (I'm not sure if they were ever needed, but
they aren't now.)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (parts)
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com>
Discussion: https://postgr.es/m/CA+hUKGLJ=84YT+NvhkEEDAuUtVHMfQ9i-N7k_o50JmQ6Rpj_OQ@mail.gmail.com
The previous coding was confused about whether head_timestamp was
intended to represent the timestamp for the newest bucket in the
mapping or the oldest timestamp for the oldest bucket in the mapping.
Decide that it's intended to be the oldest one, and repair
accordingly.
To do that, we need to do two things. First, when advancing to a
new bucket, don't categorically set head_timestamp to the new
timestamp. Do this only if we're blowing out the map completely
because a lot of time has passed since we last maintained it. If
we're replacing entries one by one, advance head_timestamp by
1 minute for each; if we're filling in unused entries, don't
advance head_timestamp at all.
Second, fix the computation of how many buckets we need to advance.
The previous formula would be correct if head_timestamp were the
timestamp for the new bucket, but we're now making all the code
agree that it's the timestamp for the oldest bucket, so adjust the
formula accordingly.
This is certainly a bug fix, but I don't feel good about
back-patching it without the introspection tools added by commit
aecf5ee2bb, and perhaps also some
actual tests. Since back-patching the introspection tools might
not attract sufficient support and since there are no automated
tests of these fixes yet, I'm just committing this to master for
now.
Patch by me, reviewed by Thomas Munro, Dilip Kumar, Hamid Akhtar.
Discussion: http://postgr.es/m/CA+TgmoY=aqf0zjTD+3dUWYkgMiNDegDLFjo+6ze=Wtpik+3XqA@mail.gmail.com
Existing code used various inconsistent ways to printf struct stat's
st_size member. The type of that is off_t, which is in most cases a
signed 64-bit integer, so use the long long int format for it.
This makes it possible for code outside snapmgr.c to examine the
contents of this data structure. This commit does not add any code
which actually does so; a subsequent commit will make that change.
Patch by me, reviewed by Thomas Munro, Dilip Kumar, Hamid Akhtar.
Discussion: http://postgr.es/m/CA+TgmoY=aqf0zjTD+3dUWYkgMiNDegDLFjo+6ze=Wtpik+3XqA@mail.gmail.com
Commit fbeb9da22, which added the tsearch_readline APIs, left
t_readline() in place as a compatibility measure. But that function
has been unused and deprecated for twelve years now, so that seems
like enough time to remove it. Doing so, and merging t_readline's
code into tsearch_readline, aids in making several useful
improvements:
* The hard-wired 4K limit on line length in tsearch data files is
removed, by using a StringInfo buffer instead of a fixed-size buffer.
* We can buy back the per-line palloc/pfree added by 3ea7e9550
in the common case where encoding conversion is not required.
* We no longer need a separate pg_verify_mbstr call, as that
functionality was folded into encoding conversion some time ago.
(We could have done some of this stuff while keeping t_readline as a
separate API, but there seems little point, since there's no reason
for anyone to still be using t_readline directly.)
Discussion: https://postgr.es/m/48A4FA71-524E-41B9-953A-FD04EF36E2E7@yesql.se
We failed to pass down the query string to check_new_partition_bound,
so that its attempts to provide error cursor positions were for naught;
one must have the query string to get parser_errposition to do anything.
Adjust its API to require a ParseState to be passed down.
Also, improve the logic inside check_new_partition_bound so that the
cursor points at the partition bound for the specific column causing
the issue, when one can be identified.
That part is also for naught if we can't determine the query position of
the column with the problem. Improve transformPartitionBoundValue so
that it makes sure that const-simplified partition expressions will be
properly labeled with positions. In passing, skip calling evaluate_expr
if the value is already a Const, which is surely the most common case.
Alexandra Wang, Ashwin Agrawal, Amit Langote; reviewed by Ashutosh Bapat
Discussion: https://postgr.es/m/CACiyaSopZoqssfMzgHk6fAkp01cL6vnqBdmTw2C5_KJaFR_aMg@mail.gmail.com
Discussion: https://postgr.es/m/CAJV4CdrZ5mKuaEsRSbLf2URQ3h6iMtKD=hik8MaF5WwdmC9uZw@mail.gmail.com
tsearch_readline() saves the string pointer it returns to the caller
for possible use in the associated error context callback. However,
the caller will usually pfree that string sometime before it next
calls tsearch_readline(), so that there is a window where an ereport
will try to print an already-freed string.
The built-in users of tsearch_readline() happen to all do that pfree
at the bottoms of their loops, so that the window is effectively
empty for them. However, this is not documented as a requirement,
and contrib/dict_xsyn doesn't do it like that, so it seems likely
that third-party dictionaries might have live bugs here.
The practical consequences of this seem pretty limited in any case,
since production builds wouldn't clobber the freed string immediately,
besides which you'd not expect syntax errors in dictionary files
being used in production. Still, it's clearly a bug waiting to bite
somebody.
Fix by pstrdup'ing the string to be saved for the error callback,
and then pfree'ing it next time through. It's been like this for
a long time, so back-patch to all supported branches.
Discussion: https://postgr.es/m/48A4FA71-524E-41B9-953A-FD04EF36E2E7@yesql.se
The existing message about "a column definition list is only allowed for
functions returning "record"" could be given in some cases where it was
fairly confusing; in particular, a function with multiple OUT parameters
*does* return record according to pg_proc. Break it down into a couple
more cases to deliver a more on-point complaint. Per complaint from
Bruce Momjian.
Discussion: https://postgr.es/m/798909.1600562993@sss.pgh.pa.us
This completes the project of making all our derived files be
pgindent-clean (or else explicitly excluded from indentation),
so that no surprises result when running pgindent in a built-out
development tree.
Discussion: https://postgr.es/m/79ed5348-be7a-b647-dd40-742207186a22@2ndquadrant.com
Since we're bypassing the buffer manager, we need to call
PageSetChecksumInplace() directly. As reported by Justin Pryzby.
In the passing, add RelationOpenSmgr() calls before all smgrwrite() and
smgrextend() calls. Tom added one before the first smgrextend() call in
commit c2bb287025, which seems to be enough, but let's play it safe and
do it before each one. That's how it's done in the similar code in
nbtsort.c, too.
Discussion: https://www.postgresql.org/message-id/20200920224446.GF30557@telsasoft.com
It's no longer necessary to assign explicit precedences to GENERATED,
NULL_P, PRESERVE, or STRIP_P.
Actually, we don't need to assign precedence to IDENT either; that was
really just there to govern the behavior of target_el's "a_expr IDENT"
production, which no longer ends with that terminal. However, it seems
like a good idea to continue to do so, because it provides a reference
point for a precedence level that we can assign to other unreserved
keywords that lack a natural precedence level.
Research by Peter Eisentraut and John Naylor; comment rewrite by me.
Discussion: https://postgr.es/m/38ca86db-42ab-9b48-2902-337a0d6b8311@2ndquadrant.com
Commit be0a6666 left behind a comment about the order of some tests that
didn't make sense without the expensive division, and in fact we might
as well change the order to one that fails more cheaply most of the time
as a micro-optimization. Also, remove the "+ 1" applied to max_bucket,
to drop an instruction and match the original behavior. Per review
from Tom Lane.
Discussion: https://postgr.es/m/VI1PR0701MB696044FC35013A96FECC7AC8F62D0%40VI1PR0701MB6960.eurprd07.prod.outlook.com
