Add "#ifndef FRONTEND" where necessary to make pg_waldump build
on compilers that don't elide unused static-inline functions.
This back-patches relevant parts of commit 3e9ca5260, fixing build
breakage from dc7420c2c and back-patching of f10f0ae42.
Per recently-resurrected buildfarm member castoroides. We aren't
expecting castoroides to build anything newer than v11, but we
might as well clean up the intermediate branches while at it.
This is a back-patch of the v15-era commit f10f0ae42 into older
supported branches. The idea is to design out bugs in which an
ill-timed relcache flush clears rel->rd_smgr partway through
some code sequence that wasn't expecting that. We had another
report today of a corner case that reliably crashes v14 under
debug_discard_caches (nee CLOBBER_CACHE_ALWAYS), and therefore
would crash once in a blue moon in the field. We're unlikely
to get rid of all such code paths unless we adopt the more
rigorous coding rules instituted by f10f0ae42. Therefore,
even though this is a bit invasive, it's time to back-patch.
Some comfort can be taken in the fact that f10f0ae42 has been
in v15 for 16 months without problems.
I left the RelationOpenSmgr macro present in the back branches,
even though no core code should use it anymore, in order to not break
third-party extensions in minor releases. Such extensions might opt
to start using RelationGetSmgr instead, to reduce their code
differential between v15 and earlier branches. This carries a hazard
of failing to compile against headers from existing minor releases.
However, once compiled the extension should work fine even with such
releases, because RelationGetSmgr is a "static inline" function so
it creates no link-time dependency. So depending on distribution
practices, that might be an OK tradeoff.
Per report from Spyridon Dimitrios Agathos. Original patch
by Amul Sul.
Discussion: https://postgr.es/m/CAFM5RaqdgyusQvmWkyPYaWMwoK5gigdtW-7HcgHgOeAw7mqJ_Q@mail.gmail.com
Discussion: https://postgr.es/m/CANiYTQsU7yMFpQYnv=BrcRVqK_3U3mtAzAsJCaqtzsDHfsUbdQ@mail.gmail.com
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Back-patch to 9.5 (all supported versions). This introduces a new WAL
record type, XLOG_GIST_ASSIGN_LSN, without bumping XLOG_PAGE_MAGIC. As
always, update standby systems before master systems. This changes
sizeof(RelationData) and sizeof(IndexStmt), breaking binary
compatibility for affected extensions. (The most recent commit to
affect the same class of extensions was
089e4d405d0f3b94c74a2c6a54357a84a681754b.)
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
Remove an obsolete comment from AtEOXact_cleanup(). Restore formatting
of a comment in struct RelationData, mangled by the pgindent run in
commit 9af4159fce. Back-patch to 9.5 (all
supported versions), because another fix stacks on this.
RelationAllowsEarlyPruning() performed a catalog scan, but is used
in two contexts where that was a bad idea:
1. In heap_page_prune_opt(), which runs very frequently in some large
scans. This caused major performance problems in a field report
that was easy to reproduce.
2. In TestForOldSnapshot(), which runs while we hold a buffer content
lock. It's not clear if this was guaranteed to be free of buffer
deadlock risk.
The check was introduced in commit 2cc41acd8 and defended against a
real problem: 9.6's hash indexes have no page LSN and so we can't
allow early pruning (ie the snapshot-too-old feature). We can remove
the check from all later releases though: hash indexes are now logged,
and there is no way to create UNLOGGED indexes on regular logged
tables.
If a future release allows such a combination, it might need to put
a similar check in place, but it'll need some more thought.
Back-patch to 10.
Author: Thomas Munro
Reviewed-by: Tom Lane, who spotted the second problem
Discussion: https://postgr.es/m/CA%2BhUKGKT8oTkp5jw_U4p0S-7UG9zsvtw_M47Y285bER6a2gD%2Bg%40mail.gmail.com
Discussion: https://postgr.es/m/CAA4eK1%2BWy%2BN4eE5zPm765h68LrkWc3Biu_8rzzi%2BOYX4j%2BiHRw%40mail.gmail.com
The original coding of generate_partition_qual() just copied the list
of predicate expressions into the global CacheMemoryContext, making it
effectively impossible to clean up when the owning relcache entry is
destroyed --- the relevant code in RelationDestroyRelation() only managed
to free the topmost List header :-(. This resulted in a session-lifespan
memory leak whenever a table partition's relcache entry is rebuilt.
Fortunately, that's not normally a large data structure, and rebuilds
shouldn't occur all that often in production situations; but this is
still a bug worth fixing back to v10 where the code was introduced.
To fix, put the cached expression tree into its own small memory context,
as we do with other complicated substructures of relcache entries.
Also, deal more honestly with the case that a partition has an empty
partcheck list; while that probably isn't a case that's very interesting
for production use, it's legal.
In passing, clarify comments about how partitioning-related relcache
data structures are managed, and add some Asserts that we're not leaking
old copies when we overwrite these data fields.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/7961.1552498252@sss.pgh.pa.us
There was no code to handle foreign key constraints on partitioned
tables in the case of ALTER TABLE DETACH; and if you happened to ATTACH
a partition that already had an equivalent constraint, that one was
ignored and a new constraint was created. Adding this to the fact that
foreign key cloning reuses the constraint name on the partition instead
of generating a new name (as it probably should, to cater to SQL
standard rules about constraint naming within schemas), the result was a
pretty poor user experience -- the most visible failure was that just
detaching a partition and re-attaching it failed with an error such as
ERROR: duplicate key value violates unique constraint "pg_constraint_conrelid_contypid_conname_index"
DETAIL: Key (conrelid, contypid, conname)=(26702, 0, test_result_asset_id_fkey) already exists.
because it would try to create an identically-named constraint in the
partition. To make matters worse, if you tried to drop the constraint
in the now-independent partition, that would fail because the constraint
was still seen as dependent on the constraint in its former parent
partitioned table:
ERROR: cannot drop inherited constraint "test_result_asset_id_fkey" of relation "test_result_cbsystem_0001_0050_monthly_2018_09"
This fix attacks the problem from two angles: first, when the partition
is detached, the constraint is also marked as independent, so the drop
now works. Second, when the partition is re-attached, we scan existing
constraints searching for one matching the FK in the parent, and if one
exists, we link that one to the parent constraint. So we don't end up
with a duplicate -- and better yet, we don't need to scan the referenced
table to verify that the constraint holds.
To implement this I made a small change to previously planner-only
struct ForeignKeyCacheInfo to contain the constraint OID; also relcache
now maintains the list of FKs for partitioned tables too.
Backpatch to 11.
Reported-by: Michael Vitale (bug #15425)
Discussion: https://postgr.es/m/15425-2dbc9d2aa999f816@postgresql.org
A collection of typos I happened to spot while reading code, as well as
grepping for common mistakes.
Backpatch to all supported versions, as applicable, to avoid conflicts
when backporting other commits in the future.
This patch introduces INCLUDE clause to index definition. This clause
specifies a list of columns which will be included as a non-key part in
the index. The INCLUDE columns exist solely to allow more queries to
benefit from index-only scans. Also, such columns don't need to have
appropriate operator classes. Expressions are not supported as INCLUDE
columns since they cannot be used in index-only scans.
Index access methods supporting INCLUDE are indicated by amcaninclude flag
in IndexAmRoutine. For now, only B-tree indexes support INCLUDE clause.
In B-tree indexes INCLUDE columns are truncated from pivot index tuples
(tuples located in non-leaf pages and high keys). Therefore, B-tree indexes
now might have variable number of attributes. This patch also provides
generic facility to support that: pivot tuples contain number of their
attributes in t_tid.ip_posid. Free 13th bit of t_info is used for indicating
that. This facility will simplify further support of index suffix truncation.
The changes of above are backward-compatible, pg_upgrade doesn't need special
handling of B-tree indexes for that.
Bump catalog version
Author: Anastasia Lubennikova with contribition by Alexander Korotkov and me
Reviewed by: Peter Geoghegan, Tomas Vondra, Antonin Houska, Jeff Janes,
David Rowley, Alexander Korotkov
Discussion: https://www.postgresql.org/message-id/flat/56168952.4010101@postgrespro.ru
Vacuum of index consists from two stages: multiple (zero of more) ambulkdelete
calls and one amvacuumcleanup call. When workload on particular table
is append-only, then autovacuum isn't intended to touch this table. However,
user may run vacuum manually in order to fill visibility map and get benefits
of index-only scans. Then ambulkdelete wouldn't be called for indexes
of such table (because no heap tuples were deleted), only amvacuumcleanup would
be called In this case, amvacuumcleanup would perform full index scan for
two objectives: put recyclable pages into free space map and update index
statistics.
This patch allows btvacuumclanup to skip full index scan when two conditions
are satisfied: no pages are going to be put into free space map and index
statistics isn't stalled. In order to check first condition, we store
oldest btpo_xact in the meta-page. When it's precedes RecentGlobalXmin, then
there are some recyclable pages. In order to check second condition we store
number of heap tuples observed during previous full index scan by cleanup.
If fraction of newly inserted tuples is less than
vacuum_cleanup_index_scale_factor, then statistics isn't considered to be
stalled. vacuum_cleanup_index_scale_factor can be defined as both reloption and GUC (default).
This patch bumps B-tree meta-page version. Upgrade of meta-page is performed
"on the fly": during VACUUM meta-page is rewritten with new version. No special
handling in pg_upgrade is required.
Author: Masahiko Sawada, Alexander Korotkov
Review by: Peter Geoghegan, Kyotaro Horiguchi, Alexander Korotkov, Yura Sokolov
Discussion: https://www.postgresql.org/message-id/flat/CAD21AoAX+d2oD_nrd9O2YkpzHaFr=uQeGr9s1rKC3O4ENc568g@mail.gmail.com
If the value of an index expression is unchanged after UPDATE,
allow HOT updates where previously we disallowed them, giving
a significant performance boost in those cases.
Particularly useful for indexes such as JSON->>field where the
JSON value changes but the indexed value does not.
Submitted as "surjective indexes" patch, now enabled by use
of new "recheck_on_update" parameter.
Author: Konstantin Knizhnik
Reviewer: Simon Riggs, with much wordsmithing and some cleanup
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.czhttps://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
We've accumulated quite a bit of stuff with which pgindent is not
quite happy in this code; clean it up to provide a less-annoying base
for future pgindent runs.
Table partitioning is like table inheritance and reuses much of the
existing infrastructure, but there are some important differences.
The parent is called a partitioned table and is always empty; it may
not have indexes or non-inherited constraints, since those make no
sense for a relation with no data of its own. The children are called
partitions and contain all of the actual data. Each partition has an
implicit partitioning constraint. Multiple inheritance is not
allowed, and partitioning and inheritance can't be mixed. Partitions
can't have extra columns and may not allow nulls unless the parent
does. Tuples inserted into the parent are automatically routed to the
correct partition, so tuple-routing ON INSERT triggers are not needed.
Tuple routing isn't yet supported for partitions which are foreign
tables, and it doesn't handle updates that cross partition boundaries.
Currently, tables can be range-partitioned or list-partitioned. List
partitioning is limited to a single column, but range partitioning can
involve multiple columns. A partitioning "column" can be an
expression.
Because table partitioning is less general than table inheritance, it
is hoped that it will be easier to reason about properties of
partitions, and therefore that this will serve as a better foundation
for a variety of possible optimizations, including query planner
optimizations. The tuple routing based which this patch does based on
the implicit partitioning constraints is an example of this, but it
seems likely that many other useful optimizations are also possible.
Amit Langote, reviewed and tested by Robert Haas, Ashutosh Bapat,
Amit Kapila, Rajkumar Raghuwanshi, Corey Huinker, Jaime Casanova,
Rushabh Lathia, Erik Rijkers, among others. Minor revisions by me.
The reloptions stuff allows this option to be set on a matview.
While it's questionable whether that is useful or was really intended,
it does work, and we shouldn't change that in minor releases. Commit
e3e66d8a9 disabled the option since I didn't realize that it was
possible for it to be set on a matview. Tweak the test to re-allow it.
Discussion: <19749.1478711862@sss.pgh.pa.us>
We really ought to make StdRdOptions and the other decoded forms of
reloptions self-identifying, but for the moment, assume that only plain
relations could possibly be user_catalog_tables. Fixes problem with bogus
"ON CONFLICT is not supported on table ... used as a catalog table" error
when target is a view with cascade option.
Discussion: <26681.1477940227@sss.pgh.pa.us>
This patch provides a new implementation of the logic added by commit
137805f89 and later removed by 77ba61080. It differs from the original
primarily in expending much less effort per joinrel in large queries,
which it accomplishes by doing most of the matching work once per query not
once per joinrel. Hopefully, it's also less buggy and better commented.
The never-documented enable_fkey_estimates GUC remains gone.
There remains work to be done to make the selectivity estimates account
for nulls in FK referencing columns; but that was true of the original
patch as well. We may be able to address this point later in beta.
In the meantime, any error should be in the direction of overestimating
rather than underestimating joinrel sizes, which seems like the direction
we want to err in.
Tomas Vondra and Tom Lane
Discussion: <31041.1465069446@sss.pgh.pa.us>
Fix a couple of overlooked uses of "degree" terminology. Make the parallel
worker count selection logic in create_plain_partial_paths more robust (in
particular, it failed with max_parallel_workers_per_gather set to zero).
This terminology provoked widespread complaints. So, instead, rename
the GUC max_parallel_degree to max_parallel_workers_per_gather
(leaving room for a possible future GUC max_parallel_workers that acts
as a system-wide limit), and rename the parallel_degree reloption to
parallel_workers. Rename structure members to match.
These changes create a dump/restore hazard for users of PostgreSQL
9.6beta1 who have set the reloption (or applied the GUC using ALTER
USER or ALTER DATABASE).
This commit reverts 137805f89 as well as the associated commits 015e88942,
5306df283, and 68d704edb. We found multiple bugs in this feature, and
there was concern about possible planner slowdown (though to be fair,
exhibiting a very large slowdown proved difficult). The way forward
requires a considerable rewrite, which may or may not be possible to
accomplish in time for beta2. In my judgment reviewing the rewrite will
be easier to accomplish starting from a clean slate, so let's temporarily
revert what's there now. This also leaves us in a safe state if it turns
out to be necessary to postpone the rewrite to the next development cycle.
Discussion: <20160429102531.GA13701@huehner.biz>
Hash indexes are not WAL-logged, and so do not maintain the LSN of
index pages. Since the "snapshot too old" feature counts on
detecting error conditions using the LSN of a table and all indexes
on it, this makes it impossible to safely do early vacuuming on any
table with a hash index, so add this to the tests for whether the
xid used to vacuum a table can be adjusted based on
old_snapshot_threshold.
While at it, add a paragraph to the docs for old_snapshot_threshold
which specifically mentions this and other aspects of the feature
which may otherwise surprise users.
Problem reported and patch reviewed by Amit Kapila
This feature is controlled by a new old_snapshot_threshold GUC. A
value of -1 disables the feature, and that is the default. The
value of 0 is just intended for testing. Above that it is the
number of minutes a snapshot can reach before pruning and vacuum
are allowed to remove dead tuples which the snapshot would
otherwise protect. The xmin associated with a transaction ID does
still protect dead tuples. A connection which is using an "old"
snapshot does not get an error unless it accesses a page modified
recently enough that it might not be able to produce accurate
results.
This is similar to the Oracle feature, and we use the same SQLSTATE
and error message for compatibility.
Now indexes (but only B-tree for now) can contain "extra" column(s) which
doesn't participate in index structure, they are just stored in leaf
tuples. It allows to use index only scan by using single index instead
of two or more indexes.
Author: Anastasia Lubennikova with minor editorializing by me
Reviewers: David Rowley, Peter Geoghegan, Jeff Janes
The code that estimates what parallel degree should be uesd for the
scan of a relation is currently rather stupid, so add a parallel_degree
reloption that can be used to override the planner's rather limited
judgement.
Julien Rouhaud, reviewed by David Rowley, James Sewell, Amit Kapila,
and me. Some further hacking by me.
This patch reduces pg_am to just two columns, a name and a handler
function. All the data formerly obtained from pg_am is now provided
in a C struct returned by the handler function. This is similar to
the designs we've adopted for FDWs and tablesample methods. There
are multiple advantages. For one, the index AM's support functions
are now simple C functions, making them faster to call and much less
error-prone, since the C compiler can now check function signatures.
For another, this will make it far more practical to define index access
methods in installable extensions.
A disadvantage is that SQL-level code can no longer see attributes
of index AMs; in particular, some of the crosschecks in the opr_sanity
regression test are no longer possible from SQL. We've addressed that
by adding a facility for the index AM to perform such checks instead.
(Much more could be done in that line, but for now we're content if the
amvalidate functions more or less replace what opr_sanity used to do.)
We might also want to expose some sort of reporting functionality, but
this patch doesn't do that.
Alexander Korotkov, reviewed by Petr Jelínek, and rather heavily
editorialized on by me.
Add a TABLESAMPLE clause to SELECT statements that allows
user to specify random BERNOULLI sampling or block level
SYSTEM sampling. Implementation allows for extensible
sampling functions to be written, using a standard API.
Basic version follows SQLStandard exactly. Usable
concrete use cases for the sampling API follow in later
commits.
Petr Jelinek
Reviewed by Michael Paquier and Simon Riggs
This is useful to control autovacuum log volume, for situations where
monitoring only a set of tables is necessary.
Author: Michael Paquier
Reviewed by: A team led by Naoya Anzai (also including Akira Kurosawa,
Taiki Kondo, Huong Dangminh), Fujii Masao.
As pointed out by Robert, we should really have named pg_rowsecurity
pg_policy, as the objects stored in that catalog are policies. This
patch fixes that and updates the column names to start with 'pol' to
match the new catalog name.
The security consideration for COPY with row level security, also
pointed out by Robert, has also been addressed by remembering and
re-checking the OID of the relation initially referenced during COPY
processing, to make sure it hasn't changed under us by the time we
finish planning out the query which has been built.
Robert and Alvaro also commented on missing OCLASS and OBJECT entries
for POLICY (formerly ROWSECURITY or POLICY, depending) in various
places. This patch fixes that too, which also happens to add the
ability to COMMENT on policies.
In passing, attempt to improve the consistency of messages, comments,
and documentation as well. This removes various incarnations of
'row-security', 'row-level security', 'Row-security', etc, in favor
of 'policy', 'row level security' or 'row_security' as appropriate.
Happy Thanksgiving!
The initial patch for RLS mistakenly included headers associated with
the executor and planner bits in rewrite/rowsecurity.h. Per policy and
general good sense, executor headers should not be included in planner
headers or vice versa.
The include of execnodes.h was a mistaken holdover from previous
versions, while the include of relation.h was used for Relation's
definition, which should have been coming from utils/relcache.h. This
patch cleans these issues up, adds comments to the RowSecurityPolicy
struct and the RowSecurityConfigType enum, and changes Relation->rsdesc
to Relation->rd_rsdesc to follow Relation field naming convention.
Additionally, utils/rel.h was including rewrite/rowsecurity.h, which
wasn't a great idea since that was pulling in things not really needed
in utils/rel.h (which gets included in quite a few places). Instead,
use 'struct RowSecurityDesc' for the rd_rsdesc field and add comments
explaining why.
Lastly, add an include into access/nbtree/nbtsort.c for
utils/sortsupport.h, which was evidently missed due to the above mess.
Pointed out by Tom in 16970.1415838651@sss.pgh.pa.us; note that the
concerns regarding a similar situation in the custom-path commit still
need to be addressed.
Building on the updatable security-barrier views work, add the
ability to define policies on tables to limit the set of rows
which are returned from a query and which are allowed to be added
to a table. Expressions defined by the policy for filtering are
added to the security barrier quals of the query, while expressions
defined to check records being added to a table are added to the
with-check options of the query.
New top-level commands are CREATE/ALTER/DROP POLICY and are
controlled by the table owner. Row Security is able to be enabled
and disabled by the owner on a per-table basis using
ALTER TABLE .. ENABLE/DISABLE ROW SECURITY.
Per discussion, ROW SECURITY is disabled on tables by default and
must be enabled for policies on the table to be used. If no
policies exist on a table with ROW SECURITY enabled, a default-deny
policy is used and no records will be visible.
By default, row security is applied at all times except for the
table owner and the superuser. A new GUC, row_security, is added
which can be set to ON, OFF, or FORCE. When set to FORCE, row
security will be applied even for the table owner and superusers.
When set to OFF, row security will be disabled when allowed and an
error will be thrown if the user does not have rights to bypass row
security.
Per discussion, pg_dump sets row_security = OFF by default to ensure
that exports and backups will have all data in the table or will
error if there are insufficient privileges to bypass row security.
A new option has been added to pg_dump, --enable-row-security, to
ask pg_dump to export with row security enabled.
A new role capability, BYPASSRLS, which can only be set by the
superuser, is added to allow other users to be able to bypass row
security using row_security = OFF.
Many thanks to the various individuals who have helped with the
design, particularly Robert Haas for his feedback.
Authors include Craig Ringer, KaiGai Kohei, Adam Brightwell, Dean
Rasheed, with additional changes and rework by me.
Reviewers have included all of the above, Greg Smith,
Jeff McCormick, and Robert Haas.
rd_replidindex should be managed the same as rd_oidindex, and rd_keyattr
and rd_idattr should be managed like rd_indexattr. Omissions in this area
meant that the bitmapsets computed for rd_keyattr and rd_idattr would be
leaked during any relcache flush, resulting in a slow but permanent leak in
CacheMemoryContext. There was also a tiny probability of relcache entry
corruption if we ran out of memory at just the wrong point in
RelationGetIndexAttrBitmap. Otherwise, the fields were not zeroed where
expected, which would not bother the code any AFAICS but could greatly
confuse anyone examining the relcache entry while debugging.
Also, create an API function RelationGetReplicaIndex rather than letting
non-relcache code be intimate with the mechanisms underlying caching of
that value (we won't even mention the memory leak there).
Also, fix a relcache flush hazard identified by Andres Freund:
RelationGetIndexAttrBitmap must not assume that rd_replidindex stays valid
across index_open.
The aspects of this involving rd_keyattr date back to 9.3, so back-patch
those changes.
Previously we were piggybacking on transaction ID parameters to freeze
multixacts; but since there isn't necessarily any relationship between
rates of Xid and multixact consumption, this turns out not to be a good
idea.
Therefore, we now have multixact-specific freezing parameters:
vacuum_multixact_freeze_min_age: when to remove multis as we come across
them in vacuum (default to 5 million, i.e. early in comparison to Xid's
default of 50 million)
vacuum_multixact_freeze_table_age: when to force whole-table scans
instead of scanning only the pages marked as not all visible in
visibility map (default to 150 million, same as for Xids). Whichever of
both which reaches the 150 million mark earlier will cause a whole-table
scan.
autovacuum_multixact_freeze_max_age: when for cause emergency,
uninterruptible whole-table scans (default to 400 million, double as
that for Xids). This means there shouldn't be more frequent emergency
vacuuming than previously, unless multixacts are being used very
rapidly.
Backpatch to 9.3 where multixacts were made to persist enough to require
freezing. To avoid an ABI break in 9.3, VacuumStmt has a couple of
fields in an unnatural place, and StdRdOptions is split in two so that
the newly added fields can go at the end.
Patch by me, reviewed by Robert Haas, with additional input from Andres
Freund and Tom Lane.
