Commit 4a39f87acd changed the aggregated log format. Problem is, now
the explanatory paragraph for the log line in the document is too
long. Also the log format included more optional columns, and it's
harder to parse the log lines. This commit tries to solve the
problems.
- There's no optional log columns anymore. If a column is not
meaningful with provided pgbench option, it will be presented as 0.
- Reorder the log columns so that it's easier to parse them.
- Adjust explanatory paragraph for the log line in the doc.
Discussion: https://postgr.es/m/flat/202203280757.3tu4ovs3petm%40alvherre.pgsql
This is essentially the same as applying VACUUM FULL to a partitioned
table, which has been supported since commit 3c3bb99330 (March 2017).
While there's no great use case in applying CLUSTER to partitioned
tables, we don't have any strong reason not to allow it either.
For now, partitioned indexes cannot be marked clustered, so an index
must always be specified.
While at it, rename some variables that were RangeVars during the
development that led to 8bc717cb88 but never made it that way to the
source tree; there's no need to perpetuate names that have always been
more confusing than helpful.
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/20201028003312.GU9241@telsasoft.com
Discussion: https://postgr.es/m/20200611153502.GT14879@telsasoft.com
When we create or alter a subscription to add publications raise a warning
for non-existent publications. We don't want to give an error here because
it is possible that users can later create the missing publications.
Author: Vignesh C
Reviewed-by: Bharath Rupireddy, Japin Li, Dilip Kumar, Euler Taveira, Ashutosh Sharma, Amit Kapila
Discussion: https://postgr.es/m/CALDaNm0f4YujGW+q-Di0CbZpnQKFFrXntikaQQKuEmGG0=Zw=Q@mail.gmail.com
libzstd allows transparent parallel compression just by setting
an option when creating the compression context, so permit that
for both client and server-side backup compression. To use this,
use something like pg_basebackup --compress WHERE-zstd:workers=N
where WHERE is "client" or "server" and N is an integer.
When compression is performed on the server side, this will spawn
threads inside the PostgreSQL backend. While there is almost no
PostgreSQL server code which is thread-safe, the threads here are used
internally by libzstd and touch only data structures controlled by
libzstd.
Patch by me, based in part on earlier work by Dipesh Pandit
and Jeevan Ladhe. Reviewed by Justin Pryzby.
Discussion: http://postgr.es/m/CA+Tgmobj6u-nWF-j=FemygUhobhryLxf9h-wJN7W-2rSsseHNA@mail.gmail.com
Because this strategy logs changes on a block-by-block basis, it
avoids the need to checkpoint before and after the operation.
However, because it logs each changed block individually, it might
generate a lot of extra write-ahead logging if the template database
is large. Therefore, the older strategy remains available via a new
STRATEGY parameter to CREATE DATABASE, and a corresponding --strategy
option to createdb.
Somewhat controversially, this patch assembles the list of relations
to be copied to the new database by reading the pg_class relation of
the template database. Cross-database access like this isn't normally
possible, but it can be made to work here because there can't be any
connections to the database being copied, nor can it contain any
in-doubt transactions. Even so, we have to use lower-level interfaces
than normal, since the table scan and relcache interfaces will not
work for a database to which we're not connected. The advantage of
this approach is that we do not need to rely on the filesystem to
determine what ought to be copied, but instead on PostgreSQL's own
knowledge of the database structure. This avoids, for example,
copying stray files that happen to be located in the source database
directory.
Dilip Kumar, with a fairly large number of cosmetic changes by me.
Reviewed and tested by Ashutosh Sharma, Andres Freund, John Naylor,
Greg Nancarrow, Neha Sharma. Additional feedback from Bruce Momjian,
Heikki Linnakangas, Julien Rouhaud, Adam Brusselback, Kyotaro
Horiguchi, Tomas Vondra, Andrew Dunstan, Álvaro Herrera, and others.
Discussion: http://postgr.es/m/CA+TgmoYtcdxBjLh31DLxUXHxFVMPGzrU5_T=CYCvRyFHywSBUQ@mail.gmail.com
The original first half of the example used an employees table and an
accounts.sales_person foreign key column, while the second half (added
in commit 8f889b1083) used a salesmen table and accounts.sales_id
for the foreign key. This makes everything use the original names.
Author: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Discussion: https://postgr.es/m/87o81vqjw0.fsf@wibble.ilmari.org
Commit f9fd176461 effectively gave
every role ADMIN OPTION on itself. However, this appears to be
something that happened accidentally as a result of refactoring
work rather than an intentional decision. Almost a decade later,
it was discovered that this was a security vulnerability. As a
result, commit fea164a72a restricted
this implicit ADMIN OPTION privilege to be exercisable only when
the role being administered is the same as the session user and
when no security-restricted operation is in progress. That
commit also documented the existence of this implicit privilege
for what seems to be the first time.
The effect of the privilege is to allow a login role to grant
the privileges of that role, and optionally ADMIN OPTION on it,
to some other role. That's an unusual thing to do, because generally
membership is granted in roles used as groups, rather than roles
used as users. Therefore, it does not seem likely that removing
the privilege will break things for many PostgreSQL users.
However, it will make it easier to reason about the permissions
system. This is the only case where a user who has not been given any
special permission (superuser, or ADMIN OPTION on some role) can
modify role membership, so removing it makes things more consistent.
For example, if a superuser sets up role A and B and grants A to B
but no other privileges to anyone, she can now be sure that no one
else will be able to revoke that grant. Without this change, that
would have been true only if A was a non-login role.
Patch by me. Reviewed by Tom Lane and Stephen Frost.
Discussion: http://postgr.es/m/CA+Tgmoawdt03kbA+dNyBcNWJpRxu0f4X=69Y3+DkXXZqmwMDLg@mail.gmail.com
MERGE performs actions that modify rows in the target table using a
source table or query. MERGE provides a single SQL statement that can
conditionally INSERT/UPDATE/DELETE rows -- a task that would otherwise
require multiple PL statements. For example,
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular tables, partitioned tables and inheritance
hierarchies, including column and row security enforcement, as well as
support for row and statement triggers and transition tables therein.
MERGE is optimized for OLTP and is parameterizable, though also useful
for large scale ETL/ELT. MERGE is not intended to be used in preference
to existing single SQL commands for INSERT, UPDATE or DELETE since there
is some overhead. MERGE can be used from PL/pgSQL.
MERGE does not support targetting updatable views or foreign tables, and
RETURNING clauses are not allowed either. These limitations are likely
fixable with sufficient effort. Rewrite rules are also not supported,
but it's not clear that we'd want to support them.
Author: Pavan Deolasee <pavan.deolasee@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Simon Riggs <simon.riggs@enterprisedb.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier versions)
Reviewed-by: Peter Geoghegan <pg@bowt.ie> (earlier versions)
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Reviewed-by: Japin Li <japinli@hotmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
Discussion: https://postgr.es/m/20201231134736.GA25392@alvherre.pgsql
When dealing with partitioned tables, counters for partitioned tables
are not updated when modifying child tables. This means autoanalyze may
not update optimizer statistics for the parent relations, which can
result in poor plans for some queries.
It's worth documenting this limitation, so that people are aware of it
and can take steps to mitigate it (e.g. by setting up a script executing
ANALYZE regularly).
Backpatch to v10. Older branches are affected too, of couse, but we no
longer maintain those.
Author: Justin Pryzby
Reviewed-by: Zhihong Yu, Tomas Vondra
Backpatch-through: 10
Discussion: https://postgr.es/m/20210913035409.GA10647%40telsasoft.com
This allows specifying an optional column list when adding a table to
logical replication. The column list may be specified after the table
name, enclosed in parentheses. Columns not included in this list are not
sent to the subscriber, allowing the schema on the subscriber to be a
subset of the publisher schema.
For UPDATE/DELETE publications, the column list needs to cover all
REPLICA IDENTITY columns. For INSERT publications, the column list is
arbitrary and may omit some REPLICA IDENTITY columns. Furthermore, if
the table uses REPLICA IDENTITY FULL, column list is not allowed.
The column list can contain only simple column references. Complex
expressions, function calls etc. are not allowed. This restriction could
be relaxed in the future.
During the initial table synchronization, only columns included in the
column list are copied to the subscriber. If the subscription has
several publications, containing the same table with different column
lists, columns specified in any of the lists will be copied.
This means all columns are replicated if the table has no column list
at all (which is treated as column list with all columns), or when of
the publications is defined as FOR ALL TABLES (possibly IN SCHEMA that
matches the schema of the table).
For partitioned tables, publish_via_partition_root determines whether
the column list for the root or the leaf relation will be used. If the
parameter is 'false' (the default), the list defined for the leaf
relation is used. Otherwise, the column list for the root partition
will be used.
Psql commands \dRp+ and \d <table-name> now display any column lists.
Author: Tomas Vondra, Alvaro Herrera, Rahila Syed
Reviewed-by: Peter Eisentraut, Alvaro Herrera, Vignesh C, Ibrar Ahmed,
Amit Kapila, Hou zj, Peter Smith, Wang wei, Tang, Shi yu
Discussion: https://postgr.es/m/CAH2L28vddB_NFdRVpuyRBJEBWjz4BSyTB=_ektNRH8NJ1jf95g@mail.gmail.com
This commit adds support for decoding of sequences to the built-in
replication (the infrastructure was added by commit 0da92dc530).
The syntax and behavior mostly mimics handling of tables, i.e. a
publication may be defined as FOR ALL SEQUENCES (replicating all
sequences in a database), FOR ALL SEQUENCES IN SCHEMA (replicating
all sequences in a particular schema) or individual sequences.
To publish sequence modifications, the publication has to include
'sequence' action. The protocol is extended with a new message,
describing sequence increments.
A new system view pg_publication_sequences lists all the sequences
added to a publication, both directly and indirectly. Various psql
commands (\d and \dRp) are improved to also display publications
including a given sequence, or sequences included in a publication.
Author: Tomas Vondra, Cary Huang
Reviewed-by: Peter Eisentraut, Amit Kapila, Hannu Krosing, Andres
Freund, Petr Jelinek
Discussion: https://postgr.es/m/d045f3c2-6cfb-06d3-5540-e63c320df8bc@enterprisedb.com
Discussion: https://postgr.es/m/1710ed7e13b.cd7177461430746.3372264562543607781@highgo.ca
There are more compression parameters that can be specified than just
an integer compression level, so rename the new COMPRESSION_LEVEL
option to COMPRESSION_DETAIL before it gets released. Introduce a
flexible syntax for that option to allow arbitrary options to be
specified without needing to adjust the main replication grammar,
and common code to parse it that is shared between the client and
the server.
This commit doesn't actually add any new compression parameters,
so the only user-visible change is that you can now type something
like pg_basebackup --compress gzip:level=5 instead of writing just
pg_basebackup --compress gzip:5. However, it should make it easy to
add new options. If for example gzip starts offering fries, we can
support pg_basebackup --compress gzip:level=5,fries=true for the
benefit of users who want fries with that.
Along the way, this fixes a few things in pg_basebackup so that the
pg_basebackup can be used with a server-side compression algorithm
that pg_basebackup itself does not understand. For example,
pg_basebackup --compress server-lz4 could still succeed even if
only the server and not the client has LZ4 support, provided that
the other options to pg_basebackup don't require the client to
decompress the archive.
Patch by me. Reviewed by Justin Pryzby and Dagfinn Ilmari Mannsåker.
Discussion: http://postgr.es/m/CA+TgmoYvpetyRAbbg1M8b3-iHsaN4nsgmWPjOENu5-doHuJ7fA@mail.gmail.com
When serialization or deadlock errors are reported by backend, allow
to retry and continue the benchmarking. For this purpose new options
"--max-tries", "--failures-detailed" and "--verbose-errors" are added.
Transactions with serialization errors or deadlock errors will be
repeated after rollbacks until they complete successfully or reach the
maximum number of tries (specified by the --max-tries option), or the
maximum time of tries (specified by the --latency-limit option).
These options can be specified at the same time. It is not possible to
use an unlimited number of tries (--max-tries=0) without the
--latency-limit option or the --time option. By default the option
--max-tries is set to 1, which means transactions with
serialization/deadlock errors are not retried. If the last try fails,
this transaction will be reported as failed, and the client variables
will be set as they were before the first run of this transaction.
Statistics on retries and failures are printed in the progress,
transaction / aggregation logs and in the end with other results (all
and for each script). Also retries and failures are printed
per-command with average latency by using option
(--report-per-command, -r).
Option --failures-detailed prints group failures by basic types
(serialization failures / deadlock failures).
Option --verbose-errors prints distinct reports on errors and failures
(errors without retrying) by type with detailed information like which
limit for retries was violated and how far it was exceeded for the
serialization/deadlock failures.
Patch originally written by Marina Polyakova then Yugo Nagata
inherited the discussion and heavily modified the patch to make it
commitable.
Authors: Yugo Nagata, Marina Polyakova
Reviewed-by: Fabien Coelho, Tatsuo Ishii, Alvaro Herrera, Kevin Grittner, Andres Freund, Arthur Zakirov, Alexander Korotkov, Teodor Sigaev, Ildus Kurbangaliev
Discussion: https://postgr.es/m/flat/72a0d590d6ba06f242d75c2e641820ec%40postgrespro.ru
A security invoker view checks permissions for accessing its
underlying base relations using the privileges of the user of the
view, rather than the privileges of the view owner. Additionally, if
any of the base relations are tables with RLS enabled, the policies of
the user of the view are applied, rather than those of the view owner.
This allows views to be defined without giving away additional
privileges on the underlying base relations, and matches a similar
feature available in other database systems.
It also allows views to operate more naturally with RLS, without
affecting the assignments of policies to users.
Christoph Heiss, with some additional hacking by me. Reviewed by
Laurenz Albe and Wolfgang Walther.
Discussion: https://postgr.es/m/b66dd6d6-ad3e-c6f2-8b90-47be773da240%40cybertec.at
This feature allows skipping the transaction on subscriber nodes.
If incoming change violates any constraint, logical replication stops
until it's resolved. Currently, users need to either manually resolve the
conflict by updating a subscriber-side database or by using function
pg_replication_origin_advance() to skip the conflicting transaction. This
commit introduces a simpler way to skip the conflicting transactions.
The user can specify LSN by ALTER SUBSCRIPTION ... SKIP (lsn = XXX),
which allows the apply worker to skip the transaction finished at
specified LSN. The apply worker skips all data modification changes within
the transaction.
Author: Masahiko Sawada
Reviewed-by: Takamichi Osumi, Hou Zhijie, Peter Eisentraut, Amit Kapila, Shi Yu, Vignesh C, Greg Nancarrow, Haiying Tang, Euler Taveira
Discussion: https://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
When an update on a partitioned table referenced in foreign key
constraints causes a row to move from one partition to another,
the fact that the move is implemented as a delete followed by an insert
on the target partition causes the foreign key triggers to have
surprising behavior. For example, a given foreign key's delete trigger
which implements the ON DELETE CASCADE clause of that key will delete
any referencing rows when triggered for that internal DELETE, although
it should not, because the referenced row is simply being moved from one
partition of the referenced root partitioned table into another, not
being deleted from it.
This commit teaches trigger.c to skip queuing such delete trigger events
on the leaf partitions in favor of an UPDATE event fired on the root
target relation. Doing so is sensible because both the old and the new
tuple "logically" belong to the root relation.
The after trigger event queuing interface now allows passing the source
and the target partitions of a particular cross-partition update when
registering the update event for the root partitioned table. Along with
the two ctids of the old and the new tuple, the after trigger event now
also stores the OIDs of those partitions. The tuples fetched from the
source and the target partitions are converted into the root table
format, if necessary, before they are passed to the trigger function.
The implementation currently has a limitation that only the foreign keys
pointing into the query's target relation are considered, not those of
its sub-partitioned partitions. That seems like a reasonable
limitation, because it sounds rare to have distinct foreign keys
pointing to sub-partitioned partitions instead of to the root table.
This misbehavior stems from commit f56f8f8da6 (which added support for
foreign keys to reference partitioned tables) not paying sufficient
attention to commit 2f17844104 (which had introduced cross-partition
updates a year earlier). Even though the former commit goes back to
Postgres 12, we're not backpatching this fix at this time for fear of
destabilizing things too much, and because there are a few ABI breaks in
it that we'd have to work around in older branches. It also depends on
commit f4566345cf, which had its own share of backpatchability issues
as well.
Author: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Eduard Català <eduard.catala@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqFvkBCmfwkQX_yBqv2Wz8ugUGiBDxum8=WvVbfU1TXaNg@mail.gmail.com
Discussion: https://postgr.es/m/CAL54xNZsLwEM1XCk5yW9EqaRzsZYHuWsHQkA2L5MOSKXAwviCQ@mail.gmail.com
b048326 has added support for SET ACCESS METHOD in ALTER TABLE, but it
has missed a few things for materialized views:
- No documentation for this clause on the ALTER MATERIALIZED VIEW page.
- psql tab completion missing.
- No regression tests.
This commit closes the gap on all the points listed above.
Author: Yugo Nagata
Discussion: https://postgr.es/m/20220316133337.5dc9740abfa24c25ec9f67f5@sraoss.co.jp
This adds the option to use ICU as the default locale provider for
either the whole cluster or a database. New options for initdb,
createdb, and CREATE DATABASE are used to select this.
Since some (legacy) code still uses the libc locale facilities
directly, we still need to set the libc global locale settings even if
ICU is otherwise selected. So pg_database now has three
locale-related fields: the existing datcollate and datctype, which are
always set, and a new daticulocale, which is only set if ICU is
selected. A similar change is made in pg_collation for consistency,
but in that case, only the libc-related fields or the ICU-related
field is set, never both.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/5e756dd6-0e91-d778-96fd-b1bcb06c161a%402ndquadrant.com
Logical replication apply workers for a subscription can easily get stuck
in an infinite loop of attempting to apply a change, triggering an error
(such as a constraint violation), exiting with the error written to the
subscription server log, and restarting.
To partially remedy the situation, this patch adds a new subscription
option named 'disable_on_error'. To be consistent with old behavior, this
option defaults to false. When true, both the tablesync worker and apply
worker catch any errors thrown and disable the subscription in order to
break the loop. The error is still also written in the logs.
Once the subscription is disabled, users can either manually resolve the
conflict/error or skip the conflicting transaction by using
pg_replication_origin_advance() function. After resolving the conflict,
users need to enable the subscription to allow apply process to proceed.
Author: Osumi Takamichi and Mark Dilger
Reviewed-by: Greg Nancarrow, Vignesh C, Amit Kapila, Wang wei, Tang Haiying, Peter Smith, Masahiko Sawada, Shi Yu
Discussion : https://postgr.es/m/DB35438F-9356-4841-89A0-412709EBD3AB%40enterprisedb.com
Both client-side compression and server-side compression are now
supported for zstd. In addition, a backup compressed by the server
using zstd can now be decompressed by the client in order to
accommodate the use of -Fp.
Jeevan Ladhe, with some edits by me.
Discussion: http://postgr.es/m/CA+Tgmobyzfbz=gyze2_LL1ZumZunmaEKbHQxjrFkOR7APZGu-g@mail.gmail.com
This feature adds row filtering for publication tables. When a publication
is defined or modified, an optional WHERE clause can be specified. Rows
that don't satisfy this WHERE clause will be filtered out. This allows a
set of tables to be partially replicated. The row filter is per table. A
new row filter can be added simply by specifying a WHERE clause after the
table name. The WHERE clause must be enclosed by parentheses.
The row filter WHERE clause for a table added to a publication that
publishes UPDATE and/or DELETE operations must contain only columns that
are covered by REPLICA IDENTITY. The row filter WHERE clause for a table
added to a publication that publishes INSERT can use any column. If the
row filter evaluates to NULL, it is regarded as "false". The WHERE clause
only allows simple expressions that don't have user-defined functions,
user-defined operators, user-defined types, user-defined collations,
non-immutable built-in functions, or references to system columns. These
restrictions could be addressed in the future.
If you choose to do the initial table synchronization, only data that
satisfies the row filters is copied to the subscriber. If the subscription
has several publications in which a table has been published with
different WHERE clauses, rows that satisfy ANY of the expressions will be
copied. If a subscriber is a pre-15 version, the initial table
synchronization won't use row filters even if they are defined in the
publisher.
The row filters are applied before publishing the changes. If the
subscription has several publications in which the same table has been
published with different filters (for the same publish operation), those
expressions get OR'ed together so that rows satisfying any of the
expressions will be replicated.
This means all the other filters become redundant if (a) one of the
publications have no filter at all, (b) one of the publications was
created using FOR ALL TABLES, (c) one of the publications was created
using FOR ALL TABLES IN SCHEMA and the table belongs to that same schema.
If your publication contains a partitioned table, the publication
parameter publish_via_partition_root determines if it uses the partition's
row filter (if the parameter is false, the default) or the root
partitioned table's row filter.
Psql commands \dRp+ and \d <table-name> will display any row filters.
Author: Hou Zhijie, Euler Taveira, Peter Smith, Ajin Cherian
Reviewed-by: Greg Nancarrow, Haiying Tang, Amit Kapila, Tomas Vondra, Dilip Kumar, Vignesh C, Alvaro Herrera, Andres Freund, Wei Wang
Discussion: https://www.postgresql.org/message-id/flat/CAHE3wggb715X%2BmK_DitLXF25B%3DjE6xyNCH4YOwM860JR7HarGQ%40mail.gmail.com
This adds to database objects the same version tracking that collation
objects have. There is a new pg_database column datcollversion that
stores the version, a new function
pg_database_collation_actual_version() to get the version from the
operating system, and a new subcommand ALTER DATABASE ... REFRESH
COLLATION VERSION.
This was not originally added together with pg_collation.collversion,
since originally version tracking was only supported for ICU, and ICU
on a database-level is not currently supported. But we now have
version tracking for glibc (since PG13), FreeBSD (since PG14), and
Windows (since PG13), so this is useful to have now.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/f0ff3190-29a3-5b39-a179-fa32eee57db6%40enterprisedb.com
Currently, during UPDATE, the unchanged replica identity key attributes
are not logged separately because they are getting logged as part of the
new tuple. But if they are stored externally then the untoasted values are
not getting logged as part of the new tuple and logical replication won't
be able to replicate such UPDATEs. So we need to log such attributes as
part of the old_key_tuple during UPDATE.
Reported-by: Haiying Tang
Author: Dilip Kumar and Amit Kapila
Reviewed-by: Alvaro Herrera, Haiying Tang, Andres Freund
Backpatch-through: 10
Discussion: https://postgr.es/m/OS0PR01MB611342D0A92D4F4BF26C0F47FB229@OS0PR01MB6113.jpnprd01.prod.outlook.com
LZ4 compression can now be performed on the client using
pg_basebackup -Ft --compress client-lz4, and LZ4 decompression of
a backup compressed on the server can be performed on the client
using pg_basebackup -Fp --compress server-lz4.
Dipesh Pandit, reviewed and tested by Jeevan Ladhe and Tushar Ahuja,
with a few corrections - and some documentation - by me.
Discussion: http://postgr.es/m/CAN1g5_FeDmiA9D8wdG2W6Lkq5CpubxOAqTmd2et9hsinTJtsMQ@mail.gmail.com
LZ4 compression can be a lot faster than gzip compression, so users
may prefer it even if the compression ratio is not as good. We will
want pg_basebackup to support LZ4 compression and decompression on the
client side as well, and there is a pending patch for that, but it's
by a different author, so I am committing this part separately for
that reason.
Jeevan Ladhe, reviewed by Tushar Ahuja and by me.
Discussion: http://postgr.es/m/CANm22Cg9cArXEaYgHVZhCnzPLfqXCZLAzjwTq7Fc0quXRPfbxA@mail.gmail.com
Historically, the location of any files generated by pg_upgrade, as of
the per-database logs and internal dumps, has been the current working
directory, leaving all those files behind when using --retain or on a
failure.
Putting all those contents in a targeted subdirectory makes the whole
easier to debug, and simplifies the code in charge of cleaning up the
logs. Note that another reason is that this facilitates the move of
pg_upgrade to TAP with a fixed location for all the logs to grab if the
test fails repeatedly.
Initially, we thought about being able to specify the output directory
with a new option, but we have settled on using a subdirectory located
at the root of the new cluster's data folder, "pg_upgrade_output.d",
instead, as at the end the new data directory is the location of all the
data generated by pg_upgrade. There is a take with group permissions
here though: if the new data folder has been initialized with this
option, we need to create all the files and paths with the correct
permissions or a base backup taken after a pg_upgrade --retain would
fail, meaning that GetDataDirectoryCreatePerm() has to be called before
creating the log paths, before a couple of sanity checks on the clusters
and before getting the socket directory for the cluster's host settings.
The idea of the new location is based on a suggestion from Peter
Eisentraut.
Also thanks to Andrew Dunstan, Peter Eisentraut, Daniel Gustafsson, Tom
Lane and Bruce Momjian for the discussion (in alphabetical order).
Author: Justin Pryzby
Discussion: https://postgr.es/m/20211212025017.GN17618@telsasoft.com
A very well-informed user might deduce this from what we said already,
but I'd bet against it. Lay it out explicitly.
While here, rewrite the comment about tuple routing to be more
intelligible to an average SQL user.
Per bug #17395 from Alexander Lakhin. Back-patch to v11. (The text
in this area is different in v10 and I'm not sufficiently excited
about this point to adapt the patch.)
Discussion: https://postgr.es/m/17395-8c326292078d1a57@postgresql.org
Running a shell command for each file to be archived has a lot of
overhead and may not offer as much error checking as you want, or the
exact semantics that you want. So, offer the option to call a loadable
module for each file to be archived, rather than running a shell command.
Also, add a 'basic_archive' contrib module as an example implementation
that archives to a local directory.
Nathan Bossart, with a little bit of kibitzing by me.
Discussion: http://postgr.es/m/20220202224433.GA1036711@nathanxps13
The SQL standard has been ambiguous about whether null values in
unique constraints should be considered equal or not. Different
implementations have different behaviors. In the SQL:202x draft, this
has been formalized by making this implementation-defined and adding
an option on unique constraint definitions UNIQUE [ NULLS [NOT]
DISTINCT ] to choose a behavior explicitly.
This patch adds this option to PostgreSQL. The default behavior
remains UNIQUE NULLS DISTINCT. Making this happen in the btree code
is pretty easy; most of the patch is just to carry the flag around to
all the places that need it.
The CREATE UNIQUE INDEX syntax extension is not from the standard,
it's my own invention.
I named all the internal flags, catalog columns, etc. in the negative
("nulls not distinct") so that the default PostgreSQL behavior is the
default if the flag is false.
Reviewed-by: Maxim Orlov <orlovmg@gmail.com>
Reviewed-by: Pavel Borisov <pashkin.elfe@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/84e5ee1b-387e-9a54-c326-9082674bde78@enterprisedb.com
This patch improves tab completion's ability to deal with
valid variant spellings of SQL identifiers. Notably:
* Unquoted upper-case identifiers are now downcased as the backend
would do, allowing them to be completed correctly.
* Tab completion can now match identifiers that are quoted even
though they don't need to be; for example "f<TAB> now completes
to "foo" if that's the only available name. Previously, only
names that require quotes would be offered.
* Schema-qualified identifiers are now supported where SQL syntax
allows it; many lesser-used completion rules neglected this.
* Completion operations that refer back to some previously-typed
name (for example, to complete names of columns belonging to a
previously-mentioned table) now allow variant spellings of the
previous name too.
In addition, performance of tab completion queries has been
improved for databases containing many objects, although
you'd only be likely to notice with a heavily-loaded server.
Authors of future tab-completion patches should note that this
commit changes many details about how tab completion queries
must be written:
* Tab completion queries now deal in raw object names; do not
use quote_ident().
* The name-matching restriction in a query must now be written
as "outputcol LIKE '%s'", not "substring(outputcol,1,%d)='%s'".
* The SchemaQuery mechanism has been extended so that it can
handle queries that refer back to a previous name. Most completion
queries that do that should be converted to SchemaQuery form.
Only consider using a literal query if the previous name can
never be schema-qualified. Don't use a literal query if the
name-to-be-completed can validly be schema-qualified, either.
* Use set_completion_reference() to specify which word is the previous
name to consider, for either a SchemaQuery or a literal query.
* If you want to offer some keywords in addition to a query result
(for example, offer COLUMN in addition to column names after
"ALTER TABLE t RENAME"), do not use the old hack of tacking the
keywords on with UNION. Instead use the new QUERY_PLUS macros
to write such keywords separately from the query proper. The
"addon" macro arguments that used to be used for this purpose
are gone.
* If your query returns something that's not a SQL identifier
(such as an attribute number or enum label), use the new
QUERY_VERBATIM macros to prevent the result from incorrectly
getting double-quoted. You may still need to use quote_literal
in such a query, too.
Tom Lane and Haiying Tang
Discussion: https://postgr.es/m/a63cbd45e3884cf9b3961c2a6a95dcb7@G08CNEXMBPEKD05.g08.fujitsu.local
I had made it depend on superuser, but that seems clearly inferior.
Also document the permissions requirement in the straming replication
protocol section of the documentation, rather than only in the
section having to do with pg_basebackup.
Idea and patch from Dagfinn Ilmari Mannsåker.
Discussion: http://postgr.es/m/87bkzw160u.fsf@wibble.ilmari.org
If you have a low-bandwidth connection between the client and the
server, it's reasonable to want to compress on the server side but
then decompress and extract the backup on the client side. This
commit allows you do to do just that.
Dipesh Pandit, with minor and mostly cosmetic changes by me.
Discussion: http://postgr.es/m/CAN1g5_HiSh8ajUMd4ePtGyCXo89iKZTzaNyzP_qv1eJbi4YHXA@mail.gmail.com
The original text on refreshing collation versions was written
specifically for ICU, and then information for other providers was
incrementally tacked on at the end. Reword this to be a bit more
general and less reflective of how it was added.
Commit 0ad8032910 failed to update
the pg_basebackup documentation to mention that "client-" or
"server-" can now be prepended to the compression method name. Fix
it there, and also in the --help output that you get from running
the binary.
Also in the documentation, there's an old issue that the arguments to
--checkpoint shouldn't be marked as parameters, because "fast" and
"spread" are literal strings. Fix that too.
Dagfinn Ilmari Mannsåker, partly as per a report from
Shinoda Noriyoshi.
Discussion: http://postgr.es/m/PH7PR84MB1885C1CF433057807551172BEE5F9@PH7PR84MB1885.NAMPRD84.PROD.OUTLOOK.COM
This fixes a set of issues that have accumulated over the past months
(or years) in various code areas. Most fixes are related to some recent
additions, as of the development of v15.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220124030001.GQ23027@telsasoft.com
pg_basebackup's --compression option now lets you write either
"client-gzip" or "server-gzip" instead of just "gzip" to specify
where the compression should be performed. If you write simply
"gzip" it's taken to mean "client-gzip" unless you also use
--target, in which case it is interpreted to mean "server-gzip",
because that's the only thing that makes any sense in that case.
To make this work, the BASE_BACKUP command now takes new
COMPRESSION and COMPRESSION_LEVEL options.
At present, pg_basebackup cannot decompress .gz files, so
server-side compression will cause a failure if (1) -Ft is not
used or (2) -R is used or (3) -D- is used without --no-manifest.
Along the way, I removed the information message added by commit
5c649fe153 which occurred if you
specified no compression level and told you that the default level
had been used instead. That seemed like more output than most
people would want.
Also along the way, this adds a check to the server for
unrecognized base backup options. This repairs a bug introduced
by commit 0ba281cb4b.
This commit also adds some new test cases for pg_verifybackup.
They take a server-side backup with and without compression, and
then extract the backup if we have the OS facilities available
to do so, and then run pg_verifybackup on the extracted
directory. That is a good test of the functionality added by
this commit and also improves test coverage for the backup target
patch (commit 3500ccc39b) and for
pg_verifybackup itself.
Patch by me, with a bug fix by Jeevan Ladhe. The patch set of which
this is a part has also had review and/or testing from Tushar Ahuja,
Suraj Kharage, Dipesh Pandit, and Mark Dilger.
Discussion: http://postgr.es/m/CA+Tgmoa-ST7fMLsVJduOB7Eub=2WjfpHS+QxHVEpUoinf4bOSg@mail.gmail.com
Commit 9a974cbcba arranged to preserve
relfilenodes and tablespace OIDs. For similar reasons, also arrange
to preserve database OIDs.
One problem is that, up until now, the OIDs assigned to the template0
and postgres databases have not been fixed. This could be a problem
when upgrading, because pg_upgrade might try to migrate a database
from the old cluster to the new cluster while keeping the OID and find
a different database with that OID, resulting in a failure. If it finds
a database with the same name and the same OID that's OK: it will be
dropped and recreated. But the same OID and a different name is a
problem.
To prevent that, fix the OIDs for postgres and template0 to specific
values less than 16384. To avoid running afoul of this rule, these
values should not be changed in future releases. It's not a problem
that these OIDs aren't fixed in existing releases, because the OIDs
that we're assigning here weren't used for either of these databases
in any previous release. Thus, there's no chance that an upgrade of
a cluster from any previous release will collide with the OIDs we're
assigning here. And going forward, the OIDs will always be fixed, so
the only potential collision is with a system database having the
same name and the same OID, which is OK.
This patch lets users assign a specific OID to a database as well,
provided however that it can't be less than 16384. I (rhaas) thought
it might be better not to expose this capability to users, but the
consensus was otherwise, so the syntax is documented. Letting users
assign OIDs below 16384 would not be OK, though, because a
user-created database with a low-numbered OID might collide with a
system-created database in a future release. We therefore prohibit
that.
Shruthi KC, based on an earlier patch from Antonin Houska, reviewed
and with some adjustments by me.
Discussion: http://postgr.es/m/CA+TgmoYgTwYcUmB=e8+hRHOFA0kkS6Kde85+UNdon6q7bt1niQ@mail.gmail.com
Discussion: http://postgr.es/m/CAASxf_Mnwm1Dh2vd5FAhVX6S1nwNSZUB1z12VddYtM++H2+p7w@mail.gmail.com
