Add missing index entries, add missing information on pg_upgrade man
page, order things alphabetical instead of (apparently) in the order
they were implemented, reduce repetitiveness a bit.
Make the directory where the pg_upgrade binary resides the default for
new bindir, as running the pg_upgrade binary from where the new
cluster is installed is a very common scenario. Setting this as the
defauly bindir for the new cluster will remove the need to provide it
explicitly via -B in many cases.
To support directories being missing from option parsing, extend the
directory check with a missingOk mode where the path must be filled at
a later point before being used. Also move the exec_path check to
earlier in setup to make sure we know the new cluster bindir when we
scan for required executables.
This removes the exec_path from the OSInfo struct as it is not used
anywhere.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/9328.1552952117@sss.pgh.pa.us
This feature was using a process local map to track the first few blocks
in the relation. The map was reset each time we get the block with enough
freespace. It was discussed that it would be better to track this map on
a per-relation basis in relcache and then invalidate the same whenever
vacuum frees up some space in the page or when FSM is created. The new
design would be better both in terms of API design and performance.
List of commits reverted, in reverse chronological order:
06c8a5090e Improve code comments in b0eaa4c51b.
13e8643bfc During pg_upgrade, conditionally skip transfer of FSMs.
6f918159a9 Add more tests for FSM.
9c32e4c350 Clear the local map when not used.
29d108cdec Update the documentation for FSM behavior..
08ecdfe7e5 Make FSM test portable.
b0eaa4c51b Avoid creation of the free space map for small heap relations.
Discussion: https://postgr.es/m/20190416180452.3pm6uegx54iitbt5@alap3.anarazel.de
If a heap on the old cluster has 4 pages or fewer, and the old cluster
was PG v11 or earlier, don't copy or link the FSM. This will shrink
space usage for installations with large numbers of small tables.
This will allow pg_upgrade to take advantage of commit b0eaa4c51b where
we have avoided creation of the free space map for small heap relations.
Author: John Naylor
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CACPNZCu4cOdm3uGnNEGXivy7Gz8UWyQjynDpdkPGabQ18_zK6g%40mail.gmail.com
This allows control of the directory in which the postmaster sockets
are created for the temporary postmasters started by pg_upgrade.
The default location remains the current working directory, which is
typically fine, but if it is deeply nested then its pathname might
be too long to be a socket name.
In passing, clean up some messiness in pg_upgrade's option handling,
particularly the confusing and undocumented way that configuration-only
datadirs were handled. And fix check_required_directory's substantially
under-baked cleanup of directory pathnames.
Daniel Gustafsson, reviewed by Hironobu Suzuki, some code cleanup by me
Discussion: https://postgr.es/m/E72DD5C3-2268-48A5-A907-ED4B34BEC223@yesql.se
recovery.conf settings are now set in postgresql.conf (or other GUC
sources). Currently, all the affected settings are PGC_POSTMASTER;
this could be refined in the future case by case.
Recovery is now initiated by a file recovery.signal. Standby mode is
initiated by a file standby.signal. The standby_mode setting is
gone. If a recovery.conf file is found, an error is issued.
The trigger_file setting has been renamed to promote_trigger_file as
part of the move.
The documentation chapter "Recovery Configuration" has been integrated
into "Server Configuration".
pg_basebackup -R now appends settings to postgresql.auto.conf and
creates a standby.signal file.
Author: Fujii Masao <masao.fujii@gmail.com>
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Abhijit Menon-Sen <ams@2ndquadrant.com>
Author: Sergei Kornilov <sk@zsrv.org>
Discussion: https://www.postgresql.org/message-id/flat/607741529606767@web3g.yandex.ru/
Add another transfer mode --clone to pg_upgrade (besides the existing
--link and the default copy), using special file cloning calls. This
makes the file transfer faster and more space efficient, achieving
speed similar to --link mode without the associated drawbacks.
On Linux, file cloning is supported on Btrfs and XFS (if formatted with
reflink support). On macOS, file cloning is supported on APFS.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Mention that "Latest checkpoint location" will not match in pg_upgrade
if the standby server is still running during the upgrade, which is
possible. "Match" text first appeared in PG 9.5.
Reported-by: Paul Bonaud
Discussion: https://postgr.es/m/c7268794-edb4-1772-3bfd-04c54585c24e@trainline.com
Backpatch-through: 9.5
Technically, pg_upgrade's --old-datadir and --new-datadir are
configuration directories, not necessarily data directories. This is
reflected in the 'postgres' manual page, so do the same for pg_upgrade.
Reported-by: Yves Goergen
Bug: 14898
Discussion: https://postgr.es/m/20171110220912.31513.13322@wrigleys.postgresql.org
Backpatch-through: 10
Clarify that the restriction against reg* types only applies to table
columns using these types, not to the type appearing in any other way,
for example as a function argument.
Since some preparation work had already been done, the only source
changes left were changing empty-element tags like <xref linkend="foo">
to <xref linkend="foo"/>, and changing the DOCTYPE.
The source files are still named *.sgml, but they are actually XML files
now. Renaming could be considered later.
In the build system, the intermediate step to convert from SGML to XML
is removed. Everything is build straight from the source files again.
The OpenSP (or the old SP) package is no longer needed.
The documentation toolchain instructions are updated and are much
simpler now.
Peter Eisentraut, Alexander Lakhin, Jürgen Purtz
For DocBook XML compatibility, don't use SGML empty tags (</>) anymore,
replace by the full tag name. Add a warning option to catch future
occurrences.
Alexander Lakhin, Jürgen Purtz
Since rsync 3.0.0 (released in 2008), the default way to enumerate
changes was changed in a way that makes it less likely that the hardlink
sync mode works. Since the whole point of the documented procedure is
for the hardlinks to work, change our docs to suggest using the
backwards compatibility switch.
Document that rsync is an _optional_ way to upgrade standbys, suggest
rsync option --dry-run, and mention a way of upgrading one standby from
another using rsync. Also clarify some instructions by specifying if
they operate on the old or new clusters.
Reported-by: Stephen Frost, Magnus Hagander
Discussion: https://postgr.es/m/20170914191250.GB6595@momjian.us
Backpatch-through: 9.5
This makes it clear that pg_upgrade standby upgrade instructions should
only be used in link mode, adds examples, and explains how rsync works
with links.
Reported-by: Andreas Joseph Krogh
Discussion: https://postgr.es/m/VisenaEmail.6c.c0e592c5af4ef0a2.15e785dcb61@tc7-visena
Backpatch-through: 9.5
It was unsafe to instruct users to start/stop the server after
pg_upgrade was run but before the standby servers were rsync'ed. The
new instructions avoid this.
RELEASE NOTES: This fix should be mentioned in the minor release notes.
Reported-by: Dmitriy Sarafannikov and Sergey Burladyan
Discussion: https://postgr.es/m/87wp8o506b.fsf@seb.koffice.internal
Backpatch-through: 9.5, where standby server upgrade instructions first appeared
The exact numbers don't matter, since they are examples, but it was
looking quite dated.
For the target version, we now automatically substitute the current
major version. The updated example source version should be good for a
couple of years.
Previously the pg_upgrade standby upgrade instructions said not to
execute pgcrypto.sql, but it should have referenced the extension
command "CREATE EXTENSION pgcrypto". This patch makes that doc change.
Reported-by: a private bug report
Backpatch-through: 9.4, where standby instructions were added
"xlog" is not a particularly clear abbreviation for "write-ahead log",
and it sometimes confuses users into believe that the contents of the
"pg_xlog" directory are not critical data, leading to unpleasant
consequences. So, rename the directory to "pg_wal".
This patch modifies pg_upgrade and pg_basebackup to understand both
the old and new directory layouts; the former is necessary given the
purpose of the tool, while the latter merely avoids an unnecessary
backward-compatibility break.
We may wish to consider renaming other programs, switches, and
functions which still use the old "xlog" naming to also refer to
"wal". However, that's still under discussion, so let's do just this
much for now.
Discussion: CAB7nPqTeC-8+zux8_-4ZD46V7YPwooeFxgndfsq5Rg8ibLVm1A@mail.gmail.com
Michael Paquier
The distinction between "archive" and "hot_standby" existed only because
at the time "hot_standby" was added, there was some uncertainty about
stability. This is now a long time ago. We would like to move forward
with simplifying the replication configuration, but this distinction is
in the way, because a primary server cannot tell (without asking a
standby or predicting the future) which one of these would be the
appropriate level.
Pick a new name for the combined setting to make it clearer that it
covers all (non-logical) backup and replication uses. The old values
are still accepted but are converted internally.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: David Steele <david@pgmasters.net>
