must be stale. Tweak example startup scripts to not use pg_ctl but launch
the postmaster directly, thereby ensuring that only the postmaster's direct
parent shell will be a postgres-owned process. In combination these should
fix the longstanding problem of the postmaster sometimes refusing to start
during reboot because it thinks the old lockfile is not stale.
number of active subtransaction XIDs in each backend's PGPROC entry,
and use this to avoid expensive probes into pg_subtrans during
TransactionIdIsInProgress. Extend EOXactCallback API to allow add-on
modules to get control at subxact start/end. (This is deliberately
not compatible with the former API, since any uses of that API probably
need manual review anyway.) Add basic reference documentation for
SAVEPOINT and related commands. Minor other cleanups to check off some
of the open issues for subtransactions.
Alvaro Herrera and Tom Lane.
performance front, but with feature freeze upon us I think it's time to
drive a stake in the ground and say that this will be in 7.5.
Alvaro Herrera, with some help from Tom Lane.
There are various things left to do: contrib dbsize and oid2name modules
need work, and so does the documentation. Also someone should think about
COMMENT ON TABLESPACE and maybe RENAME TABLESPACE. Also initlocation is
dead, it just doesn't know it yet.
Gavin Sherry and Tom Lane.
than being random pieces of other files. Give bgwriter responsibility
for all checkpoint activity (other than a post-recovery checkpoint);
so this child process absorbs the functionality of the former transient
checkpoint and shutdown subprocesses. While at it, create an actual
include file for postmaster.c, which for some reason never had its own
file before.
about a third, make it work on non-Windows platforms again. (But perhaps
I broke the WIN32 code, since I have no way to test that.) Fold all the
paths that fork postmaster child processes to go through the single
routine SubPostmasterMain, which takes care of resurrecting the state that
would normally be inherited from the postmaster (including GUC variables).
Clean up some places where there's no particularly good reason for the
EXEC and non-EXEC cases to work differently. Take care of one or two
FIXMEs that remained in the code.
of ThisStartUpID and RedoRecPtr into new backends. It's a lot easier just
to make them all grab the values out of shared memory during startup.
This helps to decouple the postmaster from checkpoint execution, which I
need since I'm intending to let the bgwriter do it instead, and it also
fixes a bug in the Win32 port: ThisStartUpID wasn't getting propagated at
all AFAICS. (Doesn't give me a lot of faith in the amount of testing that
port has gotten.)
In the past, we used a 'Lispy' linked list implementation: a "list" was
merely a pointer to the head node of the list. The problem with that
design is that it makes lappend() and length() linear time. This patch
fixes that problem (and others) by maintaining a count of the list
length and a pointer to the tail node along with each head node pointer.
A "list" is now a pointer to a structure containing some meta-data
about the list; the head and tail pointers in that structure refer
to ListCell structures that maintain the actual linked list of nodes.
The function names of the list API have also been changed to, I hope,
be more logically consistent. By default, the old function names are
still available; they will be disabled-by-default once the rest of
the tree has been updated to use the new API names.
all the code that looks for other binaries. I move FindExec into
port/exec.c (and renamed it to find_my_binary()). I also added
find_other_binary that looks for another binary in the same directory as
the calling program, and checks the version string.
The only behavior change was that initdb and pg_dump would look in the
hard-coded bindir directory if it can't find the requested binary in the
same directory as the caller. The new code throws an error. The old
behavior seemed too error prone for version mismatches.
* removed a few redundant defines
* get_user_name safe under win32
* rationalized pipe read EOF for win32 (UPDATED PATCH USED)
* changed all backend instances of sleep() to pg_usleep
- except for the SLEEP_ON_ASSERT in assert.c, as it would exceed a
32-bit long [Note to patcher: If a SLEEP_ON_ASSERT of 2000 seconds is
acceptable, please replace with pg_usleep(2000000000L)]
I added a comment to that part of the code:
/*
* It would be nice to use pg_usleep() here, but only does 2000 sec
* or 33 minutes, which seems too short.
*/
sleep(1000000);
Claudio Natoli
subroutine in src/port/pgsleep.c. Remove platform dependencies from
miscadmin.h and put them in port.h where they belong. Extend recent
vacuum cost-based-delay patch to apply to VACUUM FULL, ANALYZE, and
non-btree index vacuuming.
By the way, where is the documentation for the cost-based-delay patch?
the relcache, and so the notion of 'blind write' is gone. This should
improve efficiency in bgwriter and background checkpoint processes.
Internal restructuring in md.c to remove the not-very-useful array of
MdfdVec objects --- might as well just use pointers.
Also remove the long-dead 'persistent main memory' storage manager (mm.c),
since it seems quite unlikely to ever get resurrected.
Natoli and Bruce Momjian (and some cosmetic fixes from Neil Conway).
Changes:
- remove duplicate signal definitions from pqsignal.h
- replace pqkill() with kill() and redefine kill() in Win32
- use ereport() in place of fprintf() in some error handling in
pqsignal.c
- export pg_queue_signal() and make use of it where necessary
- add a console control handler for Ctrl-C and similar handling
on Win32
- do WaitForSingleObjectEx() in CHECK_FOR_INTERRUPTS() on Win32;
query cancelling should now work on Win32
- various other fixes and cleanups
Make btree index creation and initial validation of foreign-key constraints
use maintenance_work_mem rather than work_mem as their memory limit.
Add some code to guc.c to allow these variables to be referenced by their
old names in SHOW and SET commands, for backwards compatibility.
* configure + Makefile changes
* shared memory attaching in EXEC_BACKEND case (+ minor fix for apparent
cygwin bug under cygwin/EXEC_BACKEND case only)
* PATH env var separator differences
* missing win32 rand functions added
* placeholder replacements for sync etc under port.h
To those who are really interested, and there are a few of you: the attached
patch + file will allow the source base to be compiled (and, for some
definition, "run") under MingW, with the following caveats (I wanted to
first properly fix all but the last of these, but y'all won't quit asking
for a patch :-):
* child death: SIGCHLD not yet sent, so as a minimum, you'll need to
put in some sort of delay after StartupDatabase, and handle setting
StartupPID to 0 etc (ie. the stuff the reaper() signal function is supposed
to do)
* dirmod.c: comment out the elog calls
* dfmgr.c: some hackage required to substitute_libpath_macro
* slru/xact.c: comment out the errno checking after the readdir
(fixed by next version of MingW)
Again, this is only if you *really* want to see postgres compile and start,
and is a nice leg-up for working on the other Win32 TODO list items. Just
don't expect too much else from it at this point...
Claudio Natoli
whereToSendOutput instead because they are really inquiring about
the correct client communication protocol. Update some comments.
This is pointing towards supporting regular FE/BE client protocol
in a standalone backend, per discussion a month or so back.
against the latest shapshot. It also includes the replacement of kill()
with pqkill() and sigsetmask() with pqsigsetmask().
Passes all tests fine on my linux machine once applied. Still doesn't
link completely on Win32 - there are a few things still required. But
much closer than before.
At Bruce's request, I'm goint to write up a README file about the method
of signals delivery chosen and why the others were rejected (basically a
summary of the mailinglist discussions). I'll finish that up once/if the
patch is accepted.
Magnus Hagander
PostmasterPid variable, which gets set (early) in PostmasterMain
getppid would not be the postmaster?
[fork/exec] Implements processCancelRequest by keeping an array of
pid/cancel_key structs in shared mem
[fork/exec] Moves AttachSharedMemoryAndSemaphores call for backends into
SubPostmasterMain
[win32] Implements reaper/waitpid by keeping an arrays of children
pids,handles in postmaster local mem
- this item is largely untested, for reasons which should be
obvious, but appears sound
[win32/all] Added extern for pgpipe in Win32 case, and changed the second
pipe call (which seems to have been missed earlier) to pgpipe
[win32] #define'd ftruncate to chsize in the Win32 case
[win32] PG_USLEEP for Win32 has a misplaced paren. Fixed.
[win32] DLLIMPORT handling for MingW case
Claudio Natoli
pghackers proposal of 8-Nov. All the existing cross-type comparison
operators (int2/int4/int8 and float4/float8) have appropriate support.
The original proposal of storing the right-hand-side datatype as part of
the primary key for pg_amop and pg_amproc got modified a bit in the event;
it is easier to store zero as the 'default' case and only store a nonzero
when the operator is actually cross-type. Along the way, remove the
long-since-defunct bigbox_ops operator class.
Remove the 'strategy map' code, which was a large amount of mechanism
that no longer had any use except reverse-mapping from procedure OID to
strategy number. Passing the strategy number to the index AM in the
first place is simpler and faster.
This is a preliminary step in planned support for cross-datatype index
operations. I'm committing it now since the ScanKeyEntryInitialize()
API change touches quite a lot of files, and I want to commit those
changes before the tree drifts under me.
now able to cope with assigning new relfilenode values to nailed-in-cache
indexes, so they can be reindexed using the fully crash-safe method. This
leaves only shared system indexes as special cases. Remove the 'index
deactivation' code, since it provides no useful protection in the shared-
index case. Require reindexing of shared indexes to be done in standalone
mode, but remove other restrictions on REINDEX. -P (IgnoreSystemIndexes)
now prevents using indexes for lookups, but does not disable index updates.
It is therefore safe to allow from PGOPTIONS. Upshot: reindexing system catalogs
can be done without a standalone backend for all cases except
shared catalogs.
max_connections at initdb time. Get rid of DEF_NBUFFERS and DEF_MAXBACKENDS
macros, which aren't doing anything useful anymore, and put more likely
defaults into postgresql.conf.sample.
