Previously, it set only DELAY_CHKPT_COMPLETE. That was important,
because it meant that if the XLOG_SMGR_TRUNCATE record preceded a
XLOG_CHECKPOINT_ONLINE record in the WAL, then the truncation would also
happen on disk before the XLOG_CHECKPOINT_ONLINE record was
written.
However, it didn't guarantee that the sync request for the truncation
was processed before the XLOG_CHECKPOINT_ONLINE record was written. By
setting DELAY_CHKPT_START, we guarantee that if an XLOG_SMGR_TRUNCATE
record is written to WAL before the redo pointer of a concurrent
checkpoint, the sync request queued by that operation must be processed
by that checkpoint, rather than being left for the following one.
This is a refinement of commit 412ad7a556. Back-patch to all supported
releases, like that commit.
Author: Robert Haas <robertmhaas@gmail.com>
Reported-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2B-2rjGZC2kwqr2NMLBcEBp4uf59QT1advbWYF_uc%2B0Aw%40mail.gmail.com
The loops over cursor argument variables neglected to ever advance
"prevvar". The code would accidentally do the right thing anyway
when removing the first or second list entry, but if it had to
remove the third or later entry then it would also remove all
entries between there and the first entry. AFAICS this would
only matter for cursors that reference out-of-scope variables,
which is a weird Informix compatibility hack; between that and
the lack of impact for short lists, it's not so surprising that
nobody has complained. Nonetheless it's a pretty obvious bug.
It would have been more obvious if these loops used a more standard
coding style for chasing the linked lists --- this business with the
"prev" pointer sometimes pointing at the current list entry is
confusing and overcomplicated. So rather than just add a minimal
band-aid, I chose to rewrite the loops in the same style we use
elsewhere, where the "prev" pointer is NULL until we are dealing with
a non-first entry and we save the "next" pointer at the top of the
loop. (Two of the four loops touched here are not actually buggy,
but it seems better to make them all look alike.)
Coverity discovered this problem, but not until 2b41de4a5 added code
to free no-longer-needed arguments structs. With that, the incorrect
link updates are possibly touching freed memory, and it complained
about that. Nonetheless the list corruption hazard is ancient, so
back-patch to all supported branches.
Commit 352f6f2d used %d instead of %lu to format DWORD (unsigned long)
with psprintf(). The _WIN32_WINNT value recently changed for MinGW in
REL_15_STABLE (commit d700e8d7), so the code was suddenly being
compiled, with warnings from gcc.
The warnings were already fixed in 16+ by commits 495ed0ef and a9bc04b2
after the _WIN32_WINNT value was increase there. 14 and 13 didn't warn
because they still use a lower value for MinGW, and supported versions
of Visual Studio should compile the code in all live branches but don't
check our format string.
The change doesn't affect the result: sizeof(int) == sizeof(long) on
this platform, and the values are computed with expressions that cannot
exceed INT_MAX so were never interpreted as negative.
Back-patch the formatting change from those commits into 13-15. This
should turn CI's 15 branch green again and stop fairywren from warning
about that on 15.
Reported-by: Andres Freund <andres@anarazel.de>
Reported-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/t2vjrcb3bloxf5qqvxjst6r7lvrefqyecxgt2koy5ho5b5glr2%40yuupmm6whgob
Commit 9044fc1d45 skipped SectionMemoryManager.h in headerscheck, and
by extension also cpluspluscheck, because it's C++ and would fail both
tests. That worked in master and REL_17_STABLE due to 7b8e2ae2fd, but
older branches have a separate cpluspluscheck script. We need to copy
the filtering rule into there too.
This problem was being reported by CI's CompilerWarnings task in the 15
and 16 branches, but was a victim of alert fatigue syndrome (unrelated
problems in the back-branches).
Fix 16, and back-patch to 13, as those are the live branches that have a
separate cpluspluscheck script.
During pgbench's table initialization, progress updates could display
leftover characters from the previous message if the new message
was shorter. This commit resolves the issue by appending spaces to
the current message to fully overwrite any remaining characters from
the previous line.
Back-patch to all the supported versions.
Author: Yushi Ogiwara, Tatsuo Ishii, Fujii Masao
Reviewed-by: Tatsuo Ishii, Fujii Masao
Discussion: https://postgr.es/m/9a9b8b95b6a709877ae48ad5b0c59bb9@oss.nttdata.com
Commit 9044fc1d45 added some files from upstream LLVM. These files
have different whitespace rules, which make the git whitespace checks
powered by gitattributes fail. To fix, add those files to the exclude
list.
Branches before 16 can't be compiled with a C23 compiler (see
deprecation warnings silenced by commit f9a56e72, and non-back-patchable
changes made in 16 by commit 1c27d16e). Test __STDC_VERSION__, and if
it's above C17 then try appending -std=gnu17. The test is done with the
user's CFLAGS, so an acceptable language version can also be configured
manually that way.
This is done in branches 15 and older, back to 9.2, per policy of
keeping them buildable with modern tools.
Discussion: https://postgr.es/m/87o72eo9iu.fsf%40gentoo.org
When using a pipeline, a transaction starts from the first command and
is committed with a Sync message or when the pipeline ends.
Functions like IsInTransactionBlock() or PreventInTransactionBlock()
were already able to understand a pipeline as being in a transaction
block, but it was not the case of CheckTransactionBlock(). This
function is called for example to generate a WARNING for SET LOCAL,
complaining that it is used outside of a transaction block.
The current state of the code caused multiple problems, like:
- SET LOCAL executed at any stage of a pipeline issued a WARNING, even
if the command was at least second in line where the pipeline is in a
transaction state.
- LOCK TABLE failed when invoked at any step of a pipeline, even if it
should be able to work within a transaction block.
The pipeline protocol assumes that the first command of a pipeline is
not part of a transaction block, and that any follow-up commands is
considered as within a transaction block.
This commit changes the backend so as an implicit transaction block is
started each time the first Execute message of a pipeline has finished
processing, with this implicit transaction block ended once a sync is
processed. The checks based on XACT_FLAGS_PIPELINING in the routines
checking if we are in a transaction block are not necessary: it is
enough to rely on the existing ones.
Some tests are added to pgbench, that can be backpatched down to v17
when \syncpipeline is involved and down to v14 where \startpipeline and
\endpipeline are available. This is unfortunately limited regarding the
error patterns that can be checked, but it provides coverage for various
pipeline combinations to check if these succeed or fail. These tests
are able to capture the case of SET LOCAL's WARNING. The author has
proposed a different feature to improve the coverage by adding similar
meta-commands to psql where error messages could be checked, something
more useful for the cases where commands cannot be used in transaction
blocks, like REINDEX CONCURRENTLY or VACUUM. This is considered as
future work for v18~.
Author: Anthonin Bonnefoy
Reviewed-by: Jelte Fennema-Nio, Michael Paquier
Discussion: https://postgr.es/m/CAO6_XqrWO8uNBQrSu5r6jh+vTGi5Oiyk4y8yXDORdE2jbzw8xw@mail.gmail.com
Backpatch-through: 13
If passed a read-write expanded object pointer, the EEOP_NULLIF
code would hand that same pointer to the equality function
and then (unless equality was reported) also return the same
pointer as its value. This is no good, because a function that
receives a read-write expanded object pointer is fully entitled
to scribble on or even delete the object, thus corrupting the
NULLIF output. (This problem is likely unobservable with the
equality functions provided in core Postgres, but it's easy to
demonstrate with one coded in plpgsql.)
To fix, make sure the pointer passed to the equality function
is read-only. We can still return the original read-write
pointer as the NULLIF result, allowing optimization of later
operations.
Per bug #18722 from Alexander Lakhin. This has been wrong
since we invented expanded objects, so back-patch to all
supported branches.
Discussion: https://postgr.es/m/18722-fd9e645448cc78b4@postgresql.org
This WARNING appeared because SearchSysCacheLocked1() read
cc_relisshared before catcache initialization, when the field is false
unconditionally. On the basis of reading false there, it constructed a
locktag as though pg_tablespace weren't relisshared. Only shared
catalogs could be affected, and only GRANT TABLESPACE was affected in
practice. SearchSysCacheLocked1() callers use one other shared-relation
syscache, DATABASEOID. DATABASEOID is initialized by the end of
CheckMyDatabase(), making the problem unreachable for pg_database.
Back-patch to v13 (all supported versions). This has no known impact
before v16, where ExecGrant_common() first appeared. Earlier branches
avoid trouble by having a separate ExecGrant_Tablespace() that doesn't
use LOCKTAG_TUPLE. However, leaving this unfixed in v15 could ensnare a
future back-patch of a SearchSysCacheLocked1() call.
Reported by Aya Iwata.
Discussion: https://postgr.es/m/OS7PR01MB11964507B5548245A7EE54E70EA212@OS7PR01MB11964.jpnprd01.prod.outlook.com
On ARM platforms where the baseline CPU target lacks CRC instructions,
we need to supply a -march flag to persuade the compiler to compile
such instructions. It turns out that our existing choice of
"-march=armv8-a+crc" has not worked for some time, because recent gcc
will interpret that as selecting software floating point, and then
will spit up if the platform requires hard-float ABI, as most do
nowadays. The end result was to silently fall back to software CRC,
which isn't very desirable since in practice almost all currently
produced ARM chips do have hardware CRC.
We can fix this by using "-march=armv8-a+crc+simd" to enable the
correct ABI choice. (This has no impact on the code actually
generated, since neither of the files we compile with this flag
does any floating-point stuff, let alone SIMD.) Keep the test for
"-march=armv8-a+crc" since that's required for soft-float ABI,
but try that second since most platforms we're likely to build on
use hard-float.
Since this isn't working as-intended on the last several years'
worth of gcc releases, back-patch to all supported branches.
Discussion: https://postgr.es/m/4496616.iHFcN1HehY@portable-bastien
Tcl 9 changed several API functions to take Tcl_Size, which is
ptrdiff_t, instead of int, for 64-bit enablement. We have to change a
few local variables to be compatible with that. We also provide a
fallback typedef of Tcl_Size for older Tcl versions.
The affected variables are used for quantities that will not approach
values beyond the range of int, so this doesn't change any
functionality.
Reviewed-by: Tristan Partin <tristan@partin.io>
Discussion: https://www.postgresql.org/message-id/flat/bce0fe54-75b4-438e-b42b-8e84bc7c0e9c%40eisentraut.org
Previously we checked "for <stdbool.h> that conforms to C99" using
autoconf's AC_HEADER_STDBOOL macro. We've required C99 since PostgreSQL
12, so the test was redundant, and under C23 it was broken: autoconf
2.69's implementation doesn't understand C23's new empty header (the
macros it's looking for went away, replaced by language keywords).
Later autoconf versions fixed that, but let's just remove the
anachronistic test.
HAVE_STDBOOL_H and HAVE__BOOL will no longer be defined, but they
weren't directly tested in core or likely extensions (except in 11, see
below). PG_USE_STDBOOL (or USE_STDBOOL in 11 and 12) is still defined
when sizeof(bool) is 1, which should be true on all modern systems.
Otherwise we define our own bool type and values of size 1, which would
fail to compile under C23 as revealed by the broken test. (We'll
probably clean that dead code up in master, but here we want a minimal
back-patchable change.)
This came to our attention when GCC 15 recently started using using C23
by default and failed to compile the replacement code, as reported by
Sam James and build farm animal alligator.
Back-patch to all supported releases, and then two older versions that
also know about <stdbool.h>, per the recently-out-of-support policy[1].
12 requires C99 so it's much like the supported releases, but 11 only
assumes C89 so it now uses AC_CHECK_HEADERS instead of the overly picky
AC_HEADER_STDBOOL. (I could find no discussion of which historical
systems had <stdbool.h> but failed the conformance test; if they ever
existed, they surely aren't relevant to that policy's goals.)
[1] https://wiki.postgresql.org/wiki/Committing_checklist#Policies
Reported-by: Sam James <sam@gentoo.org>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org> (master version)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (approach)
Discussion: https://www.postgresql.org/message-id/flat/87o72eo9iu.fsf%40gentoo.org
If the executable's .o files were produced by a compiler (probably gcc)
not using -moutline-atomics, and the corresponding .bc files were
produced by clang using -moutline-atomics (probably by default), then
the generated bitcode functions would have the target attribute
"+outline-atomics", and could fail at runtime when inlined. If the
target ISA at bitcode generation time was armv8-a (the most conservative
aarch64 target, no LSE), then LLVM IR atomic instructions would generate
calls to functions in libgcc.a or libclang_rt.*.a that switch between
LL/SC and faster LSE instructions depending on a runtime AT_HWCAP check.
Since the corresponding .o files didn't need those functions, they
wouldn't have been included in the executable, and resolution would
fail.
At least Debian and Ubuntu are known to ship gcc and clang compilers
that target armv8-a but differ on the use of outline atomics by default.
Fix, by suppressing the outline atomics attribute in bitcode explicitly.
Inline LL/SC instructions will be generated for atomic operations in
bitcode built for armv8-a. Only configure scripts are adjusted for now,
because the meson build system doesn't generate bitcode yet.
This doesn't seem to be a new phenomenon, so real cases of functions
using atomics that are inlined by JIT must be rare in the wild given how
long it took for a bug report to arrive. The reported case could be
reduced to:
postgres=# set jit_inline_above_cost = 0;
SET
postgres=# set jit_above_cost = 0;
SET
postgres=# select pg_last_wal_receive_lsn();
WARNING: failed to resolve name __aarch64_swp4_acq_rel
FATAL: fatal llvm error: Program used external function
'__aarch64_swp4_acq_rel' which could not be resolved!
The change doesn't affect non-ARM systems or later target ISAs.
Back-patch to all supported releases.
Reported-by: Alexander Kozhemyakin <a.kozhemyakin@postgrespro.ru>
Discussion: https://postgr.es/m/18610-37bf303f904fede3%40postgresql.org
Ordinarily transformSetOperationTree will collect all UNION/
INTERSECT/EXCEPT steps into the setOperations tree of the topmost
Query, so that leaf queries do not contain any setOperations.
However, it cannot thus flatten a subquery that also contains
WITH, ORDER BY, FOR UPDATE, or LIMIT. I (tgl) forgot that in
commit 07b4c48b6 and wrote an assertion in rule deparsing that
a leaf's setOperations would always be empty.
If it were nonempty then we would want to parenthesize the subquery
to ensure that the output represents the setop nesting correctly
(e.g. UNION below INTERSECT had better get parenthesized). So
rather than just removing the faulty Assert, let's change it into
an additional case to check to decide whether to add parens. We
don't expect that the additional case will ever fire, but it's
cheap insurance.
Man Zeng and Tom Lane
Discussion: https://postgr.es/m/tencent_7ABF9B1F23B0C77606FC5FE3@qq.com
In the dim past we figured it was okay to ignore collations
when combining UNION set-operation nodes into a single N-way
UNION operation. I believe that was fine at the time, but
it stopped being fine when we added nondeterministic collations:
the semantics of distinct-ness are affected by those. v17 made
it even less fine by allowing per-child sorting operations to
be merged via MergeAppend, although I think we accidentally
avoided any live bug from that.
Add a check that collations match before deciding that two
UNION nodes are equivalent. I also failed to resist the
temptation to comment plan_union_children() a little better.
Back-patch to all supported branches (v13 now), since they
all have nondeterministic collations.
Discussion: https://postgr.es/m/3605568.1731970579@sss.pgh.pa.us
fixempties() counts the number of in-arcs in the regex NFA and then
allocates an array of that many arc pointers. If the NFA contains no
arcs, this amounts to malloc(0) for which some platforms return NULL.
The code mistakenly treats that as indicating out-of-memory. Thus,
we can get a bogus "out of memory" failure for some unsatisfiable
regexes.
This happens only in v15 and earlier, since bea3d7e38 switched to
using palloc() rather than bare malloc(). And at least of the
platforms in the buildfarm, only AIX seems to return NULL. So the
impact is pretty narrow. But I don't especially want to ship code
that is failing its own regression tests, so let's fix this for
this week's releases.
A quick code survey says that there is only the one place in
src/backend/regex/ that is at risk of doing malloc(0), so we'll just
band-aid that place. A more future-proof fix could be to install a
malloc() wrapper similar to pg_malloc(). But this code seems unlikely
to change much more in the affected branches, so that's probably
overkill.
The only known test case for this involves a complemented character
class in a bracket expression, for example [^\s\S], and we didn't
support that in v13. So it may be that the problem is unreachable
in v13. But I'm not 100% sure of that, so patch v13 too.
Discussion: https://postgr.es/m/661fd81b-f069-8f30-1a41-e195c57449b4@gmail.com
After commit 5a2fed911a, the catalog state
resulting from these commands ceased to affect sessions. Restore the
longstanding behavior, which is like beginning the session with a SET
ROLE command. If cherry-picking the CVE-2024-10978 fixes, default to
including this, too. (This fixes an unintended side effect of fixing
CVE-2024-10978.) Back-patch to v12, like that commit. The release team
decided to include v12, despite the original intent to halt v12 commits
earlier this week.
Tom Lane and Noah Misch. Reported by Etienne LAFARGE.
Discussion: https://postgr.es/m/CADOZwSb0UsEr4_UTFXC5k7=fyyK8uKXekucd+-uuGjJsGBfxgw@mail.gmail.com
Previously LogicalIncreaseRestartDecodingForSlot() accidentally
accepted any LSN as the candidate_lsn and candidate_valid after the
restart_lsn of the replication slot was updated, so it potentially
caused the restart_lsn to move backwards.
A scenario where this could happen in logical replication is: after a
logical replication restart, based on previous candidate_lsn and
candidate_valid values in memory, the restart_lsn advances upon
receiving a subscriber acknowledgment. Then, logical decoding restarts
from an older point, setting candidate_lsn and candidate_valid based
on an old RUNNING_XACTS record. Subsequent subscriber acknowledgments
then update the restart_lsn to an LSN older than the current value.
In the reported case, after WAL files were removed by a checkpoint,
the retreated restart_lsn prevented logical replication from
restarting due to missing WAL segments.
This change essentially modifies the 'if' condition to 'else if'
condition within the function. The previous code had an asymmetry in
this regard compared to LogicalIncreaseXminForSlot(), which does
almost the same thing for different fields.
The WAL removal issue was reported by Hubert Depesz Lubaczewski.
Backpatch to all supported versions, since the bug exists since 9.4
where logical decoding was introduced.
Reviewed-by: Tomas Vondra, Ashutosh Bapat, Amit Kapila
Discussion: https://postgr.es/m/Yz2hivgyjS1RfMKs%40depesz.com
Discussion: https://postgr.es/m/85fff40e-148b-4e86-b921-b4b846289132%40vondra.me
Backpatch-through: 13
The current code calls array_eq() and does not provide FmgrInfo. This commit
provides initialization of FmgrInfo and uses C collation as the safe option
for text comparison because we don't know anything about the semantics of
opclass options.
Backpatch to 13, where opclass options were introduced.
Reported-by: Nicolas Maus
Discussion: https://postgr.es/m/18692-72ea398df3ec6712%40postgresql.org
Backpatch-through: 13
Commit 5a2fed911 had an unexpected side-effect: the parallel worker
launched for the new test case would fail if it couldn't use a
superuser-reserved connection slot. The reason that test failed
while all our pre-existing ones worked is that the connection
privilege tests in InitPostgres had been based on the superuserness
of the leader's AuthenticatedUserId, but after the rearrangements
of 5a2fed911 we were testing the superuserness of CurrentUserId,
which the new test case deliberately made to be a non-superuser.
This all seems very accidental and probably not the behavior we really
want, but a security patch is no time to be redesigning things.
Pending some discussion about desirable semantics, hack it so that
InitPostgres continues to pay attention to the superuserness of
AuthenticatedUserId when starting a parallel worker.
Nathan Bossart and Tom Lane, per buildfarm member sawshark.
Security: CVE-2024-10978
TestUpgradeXversion knows how to make the main regression database's
references to pg_regress.so be version-independent. But it doesn't
do that for plperl's database, so that the C function added by
commit b7e3a52a8 is causing cross-version upgrade test failures.
Path of least resistance is to just drop the function at the end
of the new test.
In <= v14, also take the opportunity to clean up the generated
test files.
Security: CVE-2024-10979
v16 commit 8fe3e697a1 used REGRESS_OPTS in
a way needing this. That broke "vcregress plcheck". Back-patch
v16..v12; newer versions don't have this build system.
The SQL spec mandates that SET SESSION AUTHORIZATION implies
SET ROLE NONE. We tried to implement that within the lowest-level
functions that manipulate these settings, but that was a bad idea.
In particular, guc.c assumes that it doesn't matter in what order
it applies GUC variable updates, but that was not the case for these
two variables. This problem, compounded by some hackish attempts to
work around it, led to some security-grade issues:
* Rolling back a transaction that had done SET SESSION AUTHORIZATION
would revert to SET ROLE NONE, even if that had not been the previous
state, so that the effective user ID might now be different from what
it had been.
* The same for SET SESSION AUTHORIZATION in a function SET clause.
* If a parallel worker inspected current_setting('role'), it saw
"none" even when it should see something else.
Also, although the parallel worker startup code intended to cope
with the current role's pg_authid row having disappeared, its
implementation of that was incomplete so it would still fail.
Fix by fully separating the miscinit.c functions that assign
session_authorization from those that assign role. To implement the
spec's requirement, teach set_config_option itself to perform "SET
ROLE NONE" when it sets session_authorization. (This is undoubtedly
ugly, but the alternatives seem worse. In particular, there's no way
to do it within assign_session_authorization without incompatible
changes in the API for GUC assign hooks.) Also, improve
ParallelWorkerMain to directly set all the relevant user-ID variables
instead of relying on some of them to get set indirectly. That
allows us to survive not finding the pg_authid row during worker
startup.
In v16 and earlier, this includes back-patching 9987a7bf3 which
fixed a violation of GUC coding rules: SetSessionAuthorization
is not an appropriate place to be throwing errors from.
Security: CVE-2024-10978
If a CTE, subquery, sublink, security invoker view, or coercion
projection references a table with row-level security policies, we
neglected to mark the plan as potentially dependent on which role
is executing it. This could lead to later executions in the same
session returning or hiding rows that should have been hidden or
returned instead.
Reported-by: Wolfgang Walther
Reviewed-by: Noah Misch
Security: CVE-2024-10976
Backpatch-through: 12
Many process environment variables (e.g. PATH), bypass the containment
expected of a trusted PL. Hence, trusted PLs must not offer features
that achieve setenv(). Otherwise, an attacker having USAGE privilege on
the language often can achieve arbitrary code execution, even if the
attacker lacks a database server operating system user.
To fix PL/Perl, replace trusted PL/Perl %ENV with a tied hash that just
replaces each modification attempt with a warning. Sites that reach
these warnings should evaluate the application-specific implications of
proceeding without the environment modification:
Can the application reasonably proceed without the modification?
If no, switch to plperlu or another approach.
If yes, the application should change the code to stop attempting
environment modifications. If that's too difficult, add "untie
%main::ENV" in any code executed before the warning. For example,
one might add it to the start of the affected function or even to
the plperl.on_plperl_init setting.
In passing, link to Perl's guidance about the Perl features behind the
security posture of PL/Perl.
Back-patch to v12 (all supported versions).
Andrew Dunstan and Noah Misch
Security: CVE-2024-10979
This commit changes libpq so that errors reported by the backend during
the protocol negotiation for SSL and GSS are discarded by the client, as
these may include bytes that could be consumed by the client and write
arbitrary bytes to a client's terminal.
A failure with the SSL negotiation now leads to an error immediately
reported, without a retry on any other methods allowed, like a fallback
to a plaintext connection.
A failure with GSS discards the error message received, and we allow a
fallback as it may be possible that the error is caused by a connection
attempt with a pre-11 server, GSS encryption having been introduced in
v12. This was a problem only with v17 and newer versions; older
versions discard the error message already in this case, assuming a
failure caused by a lack of support for GSS encryption.
Author: Jacob Champion
Reviewed-by: Peter Eisentraut, Heikki Linnakangas, Michael Paquier
Security: CVE-2024-10977
Backpatch-through: 12
Commit ac04aa84a put the shutoff for this into the planner, which is
not ideal because it doesn't prevent us from re-using a previously
made parallel plan. Revert the planner change and instead put the
shutoff into InitializeParallelDSM, modeling it on the existing code
there for recovering from failure to allocate a DSM segment.
However, that code path is mostly untested, and testing a bit harder
showed there's at least one bug: ExecHashJoinReInitializeDSM is not
prepared for us to have skipped doing parallel DSM setup. I also
thought the Assert in ReinitializeParallelWorkers is pretty
ill-advised, and replaced it with a silent Min() operation.
The existing test case added by ac04aa84a serves fine to test this
version of the fix, so no change needed there.
Patch by me, but thanks to Noah Misch for the core idea that we
could shut off worker creation when !INTERRUPTS_CAN_BE_PROCESSED.
Back-patch to v12, as ac04aa84a was.
Discussion: https://postgr.es/m/CAC-SaSzHUKT=vZJ8MPxYdC_URPfax+yoA1hKTcF4ROz_Q6z0_Q@mail.gmail.com
If the collation of any join key column doesn’t match the collation of
the corresponding partition key, partitionwise joins can yield incorrect
results. For example, rows that would match under the join key collation
might be located in different partitions due to the partitioning
collation. In such cases, a partitionwise join would yield different
results from a non-partitionwise join, so disallow it in such cases.
Reported-by: Tender Wang <tndrwang@gmail.com>
Author: Jian He <jian.universality@gmail.com>
Reviewed-by: Tender Wang <tndrwang@gmail.com>
Reviewed-by: Junwang Zhao <zhjwpku@gmail.com>
Discussion: https://postgr.es/m/CAHewXNno_HKiQ6PqyLYfuqDtwp7KKHZiH1J7Pqyz0nr+PS2Dwg@mail.gmail.com
Backpatch-through: 12
If the collation of any grouping column doesn’t match the collation of
the corresponding partition key, partitionwise grouping can yield
incorrect results. For example, rows that would be grouped under the
grouping collation may end up in different partitions under the
partitioning collation. In such cases, full partitionwise grouping
would produce results that differ from those without partitionwise
grouping, so disallowed that.
Partial partitionwise aggregation is still allowed, as the Finalize
step reconciles partition-level aggregates with grouping requirements
across all partitions, ensuring that the final output remains
consistent.
This commit also fixes group_by_has_partkey() by ensuring the
RelabelType node is stripped from grouping expressions when matching
them to partition key expressions to avoid false mismatches.
Bug: #18568
Reported-by: Webbo Han <1105066510@qq.com>
Author: Webbo Han <1105066510@qq.com>
Reviewed-by: Tender Wang <tndrwang@gmail.com>
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
Discussion: https://postgr.es/m/18568-2a9afb6b9f7e6ed3@postgresql.org
Discussion: https://postgr.es/m/tencent_9D9103CDA420C07768349CC1DFF88465F90A@qq.com
Discussion: https://postgr.es/m/CAHewXNno_HKiQ6PqyLYfuqDtwp7KKHZiH1J7Pqyz0nr+PS2Dwg@mail.gmail.com
Backpatch-through: 12
When using junction points to emulate symlinks on Windows, one edge case
was not handled correctly by commit c5cb8f3b: if a junction point is
broken (pointing to a non-existent path), we'd report ENOENT. This
doesn't break any known use case, but was noticed while developing a
test suite for these functions and is fixed here for completeness.
Also add translation ERROR_CANT_RESOLVE_FILENAME -> ENOENT, as that is
one of the errors Windows can report for some kinds of broken paths.
Discussion: https://postgr.es/m/CA%2BhUKG%2BajSQ_8eu2AogTncOnZ5me2D-Cn66iN_-wZnRjLN%2Bicg%40mail.gmail.com
(cherry picked from commit 387803d81d)
Author: Thomas Munro <tmunro@postgresql.org>
Author: Alexandra Wang <alexandra.wang.oss@gmail.com>
1. Update our open() wrapper to check for NT's STATUS_DELETE_PENDING
and translate it to Unix-like errors. This is done with
RtlGetLastNtStatus(), which is dynamically loaded from ntdll. A new
file win32ntdll.c centralizes lookup of NT functions, in case we decide
to add more in the future.
2. Remove non-working code that was trying to do something similar for
stat(), and just reuse the open() wrapper code. As a side effect,
stat() also gains resilience against "sharing violation" errors.
3. Since stat() is used very early in process startup, remove the
requirement that the Win32 signal event has been created before
pgwin32_open_handle() is reached. Instead, teach pg_usleep() to fall
back to a non-interruptible sleep if reached before the signal event is
available.
This could be back-patched, but for now it's in master only. The
problem has apparently been with us for a long time and generated only a
few complaints. Proposed patches trigger it more often, which led to
this investigation and fix.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Juan José Santamaría Flecha <juanjo.santamaria@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGJz_pZTF9mckn6XgSv69%2BjGwdgLkxZ6b3NWGLBCVjqUZA%40mail.gmail.com
(cherry picked from commit e2f0f8ed25)
Author: Thomas Munro <tmunro@postgresql.org>
Author: Alexandra Wang <alexandra.wang.oss@gmail.com>
Clang 16 is still in development, but seawasp reveals that it has
started warning about many of our casts of function pointers (those
introduced by commit 1c27d16e, and some older ones). Disable the new
warning for now, since otherwise buildfarm animal seawasp fails, and we
have no current plans to change our strategy for these callback function
types.
May be back-patched with other Clang/LLVM 16 changes around release
time.
Discussion: https://postgr.es/m/CA%2BhUKGJvX%2BL3aMN84ksT-cGy08VHErRNip3nV-WmTx7f6Pqhyw%40mail.gmail.com
(cherry picked from commit 101c37cd34)
Author: Thomas Munro <tmunro@postgresql.org>
Author: Alexandra Wang <alexandra.wang.oss@gmail.com>
Three groups of issues needed to be addressed:
load_external_function() and related functions returned PGFunction,
even though not necessarily all callers are looking for a function of
type PGFunction. Since these functions are really just wrappers
around dlsym(), change to return void * just like dlsym().
In dynahash.c, we are using strlcpy() where a function with a
signature like memcpy() is expected. This should be safe, as the new
comment there explains, but the cast needs to be augmented to avoid
the warning.
In PL/Python, methods all need to be cast to PyCFunction, per Python
API, but this now runs afoul of these warnings. (This issue also
exists in core CPython.)
To fix the second and third case, we add a new type pg_funcptr_t that
is defined specifically so that gcc accepts it as a special function
pointer that can be cast to any other function pointer without the
warning.
Also add -Wcast-function-type to the standard warning flags, subject
to configure check.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/1e97628e-6447-b4fd-e230-d109cec2d584%402ndquadrant.com
(cherry picked from commit de8feb1f3a)
Author: Peter Eisentraut <peter@eisentraut.org>
Author: Alexandra Wang <alexandra.wang.oss@gmail.com>
The code introduced by bed9075 to enhance the stat() implementation on
Windows for file sizes larger than 4GB fails to properly detect files
pending for deletion with its method based on NtQueryInformationFile()
or GetFileInformationByHandleEx(), as proved by Alexander Lakhin in a
custom TAP test of his own.
The method used in the implementation of open() to sleep and loop when
when failing on ERROR_ACCESS_DENIED (EACCES) is showing much more
stability, so switch to this method. This could still lead to issues if
the permission problem stays around for much longer than the timeout of
1 second used, but that should (hopefully) never happen in
performance-critical paths. Still, there could be a point in increasing
the timeouts for the sake of machines that handle heavy loads.
Note that WIN32's open() now uses microsoft_native_stat() as it should
be similar to stat() when working around issues with concurrent file
deletions.
I have spent some time testing this patch with pgbench in combination
of the SQL functions from genfile.c, as well as running the TAP test
provided on the thread with MSVC builds, and this looks much more
stable than the previous method.
Author: Alexander Lakhin
Reviewed-by: Tom Lane, Michael Paquier, Justin Pryzby
Discussion: https://postgr.es/m/c3427edf-d7c0-ff57-90f6-b5de3bb62709@gmail.com
Backpatch-through: 14
(cherry picked from commit 54fb8c7ddf)
Author: Alexandra Wang <alexandra.wang.oss@gmail.com>
